Пікірлер

• 
  @radragon30763 ай бұрын

  It is not help you fix it video, but rather a can someone help me fix it video.

• 
  @user-sf9nw3vn3o4 ай бұрын

  Nice. Thanks : )

• 
  @Foxtrotwilconiner19695 ай бұрын

  There inside the combustion chamber is a steel rod very thin that is screwed on from top it gets coated with dust and it stops furnace from staying on clean out all of furnace put a little machine oil after cleaning out this will make dust stick to metal frame But I’ve cleaned this rod happens if you don’t clean furnace every year

• 
  @adamlanglois5638 ай бұрын

  Still excellent 👌 thanks bud

• 
  @pentu_woof9 ай бұрын

  this helped me so much with mine thanks ❤

• 
  @SCXRRR48810 ай бұрын

  my valve cover bolts stripped

• 
  @albertstasko679011 ай бұрын

  Great video thx

• 
  @MrFacproductions Жыл бұрын

  Thank you for this, would bad sensor be he reason for the radiator fan not kicking in?

• 
  @levibedggood8700 Жыл бұрын

  Awesome Video, Helped a lot. I has question - I'm riding the bike in fifth gear going 90kmh(56mph) at around 9000rpm then when I switch to 6th gear any sort of incline even a little one my rpm drops down to 6-7000rpm and of course my speed goes down fast and worse than 5th gear. I have done a new Oil, Sparkplug change, and watching this video going to do a filter change soon, is there anything else i can do to make it better, I know I'm not going to be able to do 130kmh(81mph) but I'd like to not do 90kmh(56mph) on open road

• 
  @nilsahu5223 Жыл бұрын

  Bhaiya mere ko temperature sensor Lena tha

• 
  @VideoVictor Жыл бұрын

  Mine won't even turn the fan on helpp

• 
  @leonkirkby1392 Жыл бұрын

  Cheers mate helped a lot even 7 years after

• 
  @davescherger1304 Жыл бұрын

  How do I reset the service reminder light?

• 
  @tango99172 жыл бұрын

  My bike sounds so tappy now I’ve adjusted the ex valve to .27

• 
  @programmingkitten13262 жыл бұрын

  Hey man did it had some clicking noise or any noise before you did?

• 
  @RichardAgnewComGeek2 жыл бұрын

  Great Video. Did you see this one? Armstrong Furnace Error Codes kzread.info/dash/bejne/op1h0aaKgtyZmto.html

• 
  @atomicorang2 жыл бұрын

  This was not helpful at all

• 
  @Limonchips-47992 жыл бұрын

  what did you do to fix yours?

• 
  @atomicorang2 жыл бұрын

  @@Limonchips-4799 I had to replace the motherboard. It was like 88$ thru Amazon. I bet I had a power surge or something. I first thought maybe the thermostat but that was good.

• 
  @Limonchips-47992 жыл бұрын

  @@atomicorang my gas valve was bad, no gas flow in my furnace getting it replaced tonight

• 
  @AM-ji2ty2 жыл бұрын

  Спасибо, при следующей замене масла прочищу и фильтр.

• 
  @dizelbegachkanema99212 жыл бұрын

  Is there a way to change it without draining the coolant

• 
  @bilalmalik50022 жыл бұрын

  If you want a big Pizdet then go ahead

• 
  @Francois_Dupont3 жыл бұрын

  ohh my, mine must have 50,000km now (the speedo cable rusted and broke a year ago) its been 3 years and i keep saying i am gonna do it, but i dont want to rip the gasket.

• 
  @blucz8832 жыл бұрын

  I ripped the gasket and didnt had new one.. It hapenned the day I bough it and I was exited to ride it.. so.. I put grease on the gasket and put it back together and tighten all bolts evenly.. To my suprise, it holds perfect.. Like one piece broke of the gasket but somehow it doesnt leak no more.. I have new gasket at home now but Im not gonna change it cuz if it holds Im good with it.. Next oil change with cleaning filter I will change it.. 34 000km when I bough it and now 37 000km..

• 
  @Francois_Dupont2 жыл бұрын

  @@blucz883 i did mine 6months~ ago i think. i also ripped the gasket partially. i added special silicone sealant and put it back togeder. it doesnt leak so i am also lucky like you!

• 
  @garrishtatnov88363 жыл бұрын

  Is there a way to change it without draining the coolant.

• 
  @czajozakubus9263 жыл бұрын

  how much oil did you pour?

• 
  @anjpvideo3 жыл бұрын

  Manual says capacity is 1.0 L (1.1 US qts) of engine oil

• 
  @czajozakubus9263 жыл бұрын

  @@anjpvideo ok thanks for the answer and how did you replace the filter yo you gave the gaskets?

• 
  @jesusespinoza11683 жыл бұрын

  Ultra sx90

• 
  @jmmoto8973 жыл бұрын

  Please keep making more videos on the bike I just bought one wnd your vids are very helpful for me

• 
  @jakubminar88874 жыл бұрын

  Is there any torque for that 10 bolts on that crank case cover?

• 
  @kacperchrusciel8903 жыл бұрын

  13.5NM Or 10Ft/lbs

• 
  @jakubminar88873 жыл бұрын

  @@kacperchrusciel890 That bike is on her way to hell bro 😂

• 
  @Artanis02sk5 жыл бұрын

  Oil drain plug washer should be replaced every time, it's a crush-washer, also dirt cheap.

• 
  @MrScoobieman5 жыл бұрын

  I have the same bike, my bike has a hard time starting when it’s cold I have to start at three times every time before it runs properly. Would I need a valve adjustment? It only has 3000 km on it

• 
  @elobiretv4 жыл бұрын

  Yes it can improve cold starts

• 
  @4984Snake4 жыл бұрын

  @@elobiretv try a full service oil, air filter, spark plug, dont forget your oil strainer wich lives behind your clutch case gasket at the botom of your engine, and clean your carb

• 
  @bobicr54194 жыл бұрын

  @@4984Snake fuel injection xD 2007-2019

• 
  @kriscraig76045 жыл бұрын

  Mine was my thermostat. The power splitter for the ecobee got wet and for some reason everything would run but their was no fire. Removed the power splitter and everything worked fine

• 
  @clutchcrusade5 жыл бұрын

  I just got a Protege5 from this old lady and she’s running like 5w 50 or something weird and sometimes it blows smoke when warming up and I have to refill the oil frequently but just went through the stuff she gave me with the car but this is probably cause by valve seals being bad but I’m going to try 10w 30 and if this doesn’t work then I’ll replace valve cover gasket + valve seals. If that doesn’t work I might give up. 170k miles on it idk what else would be wrong besides head gasket or cracked block so hopefully I can afford a 240sx before it goes

• 
  @user-kj7sf4eu3q5 жыл бұрын

  so what would happen if i dont change the oil filtur ? Change oil only ? Cause its my first bike and this filtur is in uncomfortable place to change it ?

• 
  @anjpvideo5 жыл бұрын

  This bike doesn't have a filter that you change. It's just a strainer that you clean.

• 
  @user-kj7sf4eu3q5 жыл бұрын

  So these bikes there are not oilf filtur ,strainer only ?

• 
  @user-kj7sf4eu3q5 жыл бұрын

  Is it bad if i change oil without clean that strainer ?

• 
  @anjpvideo5 жыл бұрын

  @@user-kj7sf4eu3q correct, watch the video

• 
  @kaledsy43945 жыл бұрын

  جيد

• 
  @timothyewing87145 жыл бұрын

  Sorry just watched video again. Igniter dose come on so a bad gas valve or bad control board.

• 
  @timothyewing87145 жыл бұрын

  Bad pressure switch or drain is plugged up. If any drains are plugged up it won’t pull the pressure switch closed. That’s why it’s a good idea to have your furnace clean and checked every season. Especially on high efficiency.

• 
  @MohammedYousuf-nv6zp5 жыл бұрын

  Is there a gasket

• 
  @blootoober5 жыл бұрын

  my review: this thing is a complete piece of shit and an absolute waste of money. on mine, the numbers never stop moving. untrustable. literal garbage.

• 
  @olgaioica14646 жыл бұрын

  Thank you man

• 
  @Motogamna6 жыл бұрын

  There's no gasket between cover and block?

• 
  @rafiamanyar43906 жыл бұрын

  Thanks for your very helpful video, please tell me where I can download or buy the service manual. Thanks again.

• 
  @igorkoudinov67986 жыл бұрын

  Can I clamp down the tubes instead of draining them?

• 
  @anjpvideo6 жыл бұрын

  IgorKoudinov you could try clamping but you're going to lose a lot of fluids when you take the case off to expose the filter

• 
  @igorkoudinov67986 жыл бұрын

  anjpvideo Alright thanks. One more thing though, there a total of 4 tubes entering (or leaving) the crank case so what fluid do I drain in order not to get an spillage?

• 
  @cyberjack6 жыл бұрын

  madness effort just for filter ... why cant thy just have normal one

• 
  @evilsadvocate5 жыл бұрын

  there is no filter its just a strainer to stop chunks from getting sucked into the oil pump. nothing snooty like oil filters on these bikes.

• 
  @ohwa036 жыл бұрын

  Hello sir have you figure out the problem with the furnace. I am having the same issue today on my furnace aswell.

• 
  @anjpvideo6 жыл бұрын

  ohwa03 I took the pressure switch out and cleaned it really well, and it just worked after that

• 
  @abrahamsoriano42326 жыл бұрын

  what was the wrong I'm having this problem too

• 
  @rogerawong6 жыл бұрын

  Please protect your skin from dirty, hot motor oil. Latex or nitrile gloves are cheap.

• 
  @mehmetmagden96187 жыл бұрын

  Thank You.

• 
  @matthewr.22607 жыл бұрын

  the directions to at no time should you dip the pen in the above line You'll damage it must follow instructions thoroughly

• 
  @knowidea74857 жыл бұрын

  Very Good , Works for CBF 125 too ; thanks

• 
  @call2tawheed8707 жыл бұрын

  Cheers dude.

• 
  @rcafmaintainer37237 жыл бұрын

  CH-124 is the Sea King. The CH-146 is a Griffon.

• 
  @anjpvideo7 жыл бұрын

  You're absolutely right. Typo, I'll fix

• 
  @romeovictor30887 жыл бұрын

  what can i do if the oil filter doesnt come loose... there is no room to get a screw driver in as some forums say...

• 
  @anjpvideo7 жыл бұрын

  Romeo Victor you can try using a pair of channel locks or large pliers to grab the filter. Squeeze tight and you can bend the metal a bit to make the pliers stick. Then unscrew with the pliers.

• 
  @romeovictor30887 жыл бұрын

  anjpvideo thank you very much I will remember that for next time, what I ended up doing was getting rubber gloves used for fishing and that gave me enough grip to turn it off thankfully

• 
  @otarsulava2 жыл бұрын

  There is also the plier specifically for oil filter, its universal and size adjustable, see on Amazon...I have and use it both for my car and motorcycle oil filter. Good tip shown on this video - lube just a bit oil over the new filter rubber ring so it will loosen easily for the next oil change ✌

• 
  @johnrielly35887 жыл бұрын

  Hi there, FYI the Canadian Tire store located in North Vancouver BC, as of January, 2017 NO LONGER accepts used motor oil for recycling. I do not no if this is a policy for all Canadian Tire Locations in Canada. According to Recycle BC the only other location in North Vancouver (North Shore), as of this date, is PACIFIC HONDA at the North Shore Auto Mall. Thank you for your clear concise video.

• 
  @anjpvideo7 жыл бұрын

  John Rielly wow! I'm in Ontario and all the Canadian Tires accept oil. It looks like BC has a different system bcusedoil.com

• 
  @MicMurphy19817 жыл бұрын

  great helmet i owned the same one in black and silver and the strip was reflective at night but i will say this i live in the northern part of the USA and in the winter this hel.et lets to much air in even while the vents are closed. so i had to get a winter helmet. But overall a awesome helmet

• 
  @anjpvideo7 жыл бұрын

  Michael Murphy where are you located to ride through the winter?

• 
  @arisetter45047 жыл бұрын

  please what name of song of vidio( be the blues ??) thank ari setter I'm from brasil . thank you,