Пікірлер

• 
  @giacomobariani157411 сағат бұрын

  Great job! brilliant! What about cleaning it in the dishwhasher? It needs a special copal? thanks a lot

• 
  @twopoolpeople3 ай бұрын

  Thanks for this simple fix!

• 
  @davidk21374 ай бұрын

  Thanks so much Trever! This might save me from sending my new 788 Dewalt back. I will do it very soon. Do you know a fix for a mis-alignment that has my blade touching the side of the hole and not in the middle?

• 
  @unique46546 ай бұрын

  What type of printer/ink is used?

• 
  @Colt-45706 ай бұрын

  Thanks for the info! I had the aggressive cut issue with my 788 (type 2) as well. From the factory, the blade moved .070" (1.77mm) front to back. I used the method you described and it brought the front to back movement down to .029" (.73mm). Now, I can actually cut a tiny 3mm square out and have sharp 90 degree corners! It worked great and I didn't have to disassemble the entire saw as others described.

• 
  @Megsk0911 ай бұрын

  What kind of printer u used sir?

• 
  @minnamendez3927 Жыл бұрын

  I learned about this technique as a way to make stickers. I plan to use it for resin work. I'd just use mod podge to seal it. I would use dishwasher safe mod podge for using it on glass like that. It's a good way to seal it. Make it usable

• 
  @myasalaz2556 Жыл бұрын

  Can you do this on a regular printer or on a laser printer ?

• 
  @johnfast6945 Жыл бұрын

  Hi. This is cool where do I get the jigsaw outline patterns?

• 
  @KJ7JHN Жыл бұрын

  This would be a good process for pcb lithography.

• 
  @jimkelly8473 Жыл бұрын

  WOW

• 
  @jimkelly8473 Жыл бұрын

  Looks so real… Miigwech

• 
  @jimkelly8473 Жыл бұрын

  Awesome

• 
  @mtz3843 Жыл бұрын

  that was great, what scroll saw did you use?

• 
  @italoponcato2414 Жыл бұрын

  Sorry I forgot one more thing; did you spray a fixative on the photo or can you do without? Thank you again. HI

• 
  @italoponcato2414 Жыл бұрын

  Great job, congratulations . I'm also about to make some photo puzzles and I hope to make a good practice. I saw that you used a Pegas blade (2/0), but how thick are the two woods? It looks quite thick to me the one in the photo...Ciao. Italo dall'Italia

• 
  @ntsakoshilubane5025 Жыл бұрын

  Appreciate the video , I prefer printing on a clear vinyl and just stick it on the glass immediately

• 
  @garrymack514 Жыл бұрын

  Hello, but kinda paper do we need to use

• 
  @lynnraybould8713 Жыл бұрын

  Can you use photos printed from asda or max speilman

• 
  @w7ind Жыл бұрын

  Hi! My new DEWALT scroll saw when I’m putting on blade the arm barely reach the blades. My old saw I had over 1/2 inch of blade to play with. Is there a fix?

• 
  @nperson11 ай бұрын

  Are you sure the blade tensioner is all the way back?

• 
  @petricabistricean1806 Жыл бұрын

  Super tare 🌽🌽🌽🌽🌽👍👍🍯

• 
  @petricabistricean1806 Жыл бұрын

  Super tare 👍👍👍👍🌽🌽🌽👍

• 
  @MikeyDonna Жыл бұрын

  Trever , I followed your instructions and it fixed mine .

• 
  @kellycarroll6829 Жыл бұрын

  Merry Christmas! Good video!

• 
  @phyllisstone3089 Жыл бұрын

  Awesome job on the bear.

• 
  @MikeyDonna Жыл бұрын

  Trever, I have a saw like yours ordered and would like to know just what kind of problem you had ?

• 
  @pedroelcubano1 Жыл бұрын

  Hi...do you use inkjet or laser printer....cause I try with the inkjet and when peeling the paper goes off....

• 
  @DarrellWellsDifferentStuff Жыл бұрын

  Cy does some good work. I enjoy her also. I enjoy intarsia and I agree the sanding takes the most time. Great project.

• 
  @DarrellWellsDifferentStuff Жыл бұрын

  Cool project.

• 
  @hayrhayr2324 Жыл бұрын

  👍🐘

• 
  @christinalodge7597 Жыл бұрын

  Idc if this was 6 years ago. This guy took a time out to teach us a new craft, and a lot of people come on here listening for whatever reason. Shame on all y'all. Hoping so you continue to make videos thanks for sharing

• 
  @hayrhayr2324 Жыл бұрын

  👍🐘

• 
  @ROXFRANCES Жыл бұрын

  I bought these printable sheets from ebay years ago , they were transfer paper for tatoos.. I used it to transfer images on glass, now suddenly I can't find it anymore .. I think it was sublimation paper

• 
  @rroe5718 Жыл бұрын

  Trevor, could you please tell me if your fix in the video will make the blade run straighter up and down. I want to use some jeweler saw blades to cut some coins and need better more vertical blade movement and to lesson the forward and backward travel.. My dewalt now has about a 1/8" forward and back movement in the up and down stroke. Hope I explained this properly for you to understand.

• 
  @TrevorsWoodShop Жыл бұрын

  Yes doing this will make your blade run straighter up and down. When I first got my saw it was like yours with about 1/8” movement and hard to control. This has made mine run smoother and a lot less aggressive

• 
  @rroe5718 Жыл бұрын

  @@TrevorsWoodShop Thank you so much for doing this video. I'm going to get started on this today. Seems like such a simple fix one would think DeWalt would get their act together and tweak this on all models made from here on out. Thanks Again!!

• 
  @maryirodriguez4322 жыл бұрын

  If I use a hair dryer instead of putting on water you think it’ll work better?

• 
  @carolporter70942 жыл бұрын

  Do you bake these to make it permanent?

• 
  @carolporter70942 жыл бұрын

  Again is it permanent? Washable?

• 
  @vinnieromano13362 жыл бұрын

  Does this put any stress on the arm mechanism and bearings?

• 
  @DayDay-ik7kl2 жыл бұрын

  Ce ai in pahar apă? Cu ce solutie lipsești transferul pe pahar?

• 
  @amihedgecock51062 жыл бұрын

  Sorry if someone has already asked this.. do you think it would be possible to coat the glass in a sealant of some kind to make it water proof ? And what would you recommend if so please ? :))

• 
  @chitowntexan2 жыл бұрын

  Very cool technique! I've been looking for something like this

• 
  @madelynlindhorst45062 жыл бұрын

  My tape isn't getting sticky again: (((( what do i do

• 
  @user-ni4xu1eq1c2 жыл бұрын

  Γειά σας. Θέλω να σας ρωτήσω.... Μένει σταθερό στο ποτήρι χωρίς καμία κόλλα; Δεν βγαίνει στο πλύσιμο; Ευχαριστώ.

• 
  @elizabethsagarminaga42812 жыл бұрын

  does this work with sublimation inkjet?

• 
  @randystekly65182 жыл бұрын

  Awesome. Thanks for the tip.

• 
  @thedabblingdiyer58422 жыл бұрын

  This worked great for me! kzread.info/dash/bejne/ZGee3KSMpaaxhdY.html

• 
  @lindaparides87262 жыл бұрын

  ARE THEY HAND WASH ONLY , THESE ARE GIFTS ?

• 
  @shafeekraju91872 жыл бұрын

  What’s the paper use ?

• 
  @naomibrown84582 жыл бұрын

  did you use a desk jet or ink jet for the print?

• 
  @martinitang2 жыл бұрын

  What if my laser printout image is much bigger ?