Пікірлер

• 
  @tuberjr3 күн бұрын

  i travel through france and italy each year and never bothered with any telepass.......no issues....scamming is a red herring.

• 
  @TonysGarage_UK2 күн бұрын

  I'm not saying you need one. I'm saying they save a lot of time and a massive help in a right-hand drive car, especially with no passenger. Oh.. and for motorcyclists

• 
  @ColinsCapers5 күн бұрын

  My headlight has started rattling? Do you think it's those hook like clips come loose ?

• 
  @TonysGarage_UK5 күн бұрын

  Could be.. it's an easy check.

• 
  @ColinsCapers6 күн бұрын

  Thanks helped me fit mine , but mine not as loud 🤔 my word how hard is it to get toolbox. Back on !!

• 
  @TonysGarage_UK6 күн бұрын

  Yep... those bolts need to be a few mm longer to help.

• 
  @andrewsmyth16416 күн бұрын

  So is the problem with the mirrors being too small, or the stem being too short or too low?

• 
  @TonysGarage_UK6 күн бұрын

  They are too short... all you can see is Elbows lol

• 
  @andrewsmyth16416 күн бұрын

  What make were your fixed ones? Where did you get them from?

• 
  @TonysGarage_UK6 күн бұрын

  The long ones are from Cornwall Scooters.

• 
  @kevinhendon7 күн бұрын

  Adam is a top bloke, been using him for almost 10 years, never had a problem.

• 
  @TonysGarage_UK7 күн бұрын

  Agreed. He is one of the best 👌

• 
  @billymoffat474413 күн бұрын

  Tony your a life saver son always very informative vids thanks 4 sharing mate

• 
  @TonysGarage_UK13 күн бұрын

  Glad to help

• 
  @danieledirocco757815 күн бұрын

  Many thanks mate!

• 
  @TonysGarage_UK14 күн бұрын

  Glad you found it useful

• 
  @brianrobinson761515 күн бұрын

  On the lambretta you need a back nut on the other side of the bush were the wing nut is that locks the angle of the bar so it does not touch the leg sheild

• 
  @TonysGarage_UK15 күн бұрын

  Thank you.. good advice.

• 
  @jacobharlington482817 күн бұрын

  Broken G-clamp on the floor shows what a mission it was 😅

• 
  @TonysGarage_UK16 күн бұрын

  Yep! It certainly was. Thanks for stopping by.

• 
  @nmfranklin6617 күн бұрын

  Thanks mate for the great video..I literally just did mine tonight after being told to do it by a fellow owner its benefits seem to be mostly that roar but every other so called benefits are bullshit no extra BHP or torque ...just wish full thinking 😂) but the extra beathing has to be good for the engine I think . I wouldn't recommend completely removing the vent as not only will the air mixture be way to much but your air filter will be Fubarred much quicker with bugs dust and general shit getting sucked in !!!

• 
  @TonysGarage_UK16 күн бұрын

  Easy and well worth doing isn't it. Sounds surprisingly much better for such a small mod. Good advice too, thanks

• 
  @AnnoyedOx-ly7uf20 күн бұрын

  Thank you for the video. Driving to France and ordered one!

• 
  @TonysGarage_UK19 күн бұрын

  That's great Have fun!

• 
  @gerardgerard568122 күн бұрын

  Cool

• 
  @TonysGarage_UK21 күн бұрын

  Cheers!

• 
  @ardilam4425 күн бұрын

  Hi bro, where can I buy this mirror? I want the link, please Thanks

• 
  @TonysGarage_UK23 күн бұрын

  Cornwall scooters in the UK

• 
  @philiphedges876426 күн бұрын

  Top bloke tony just put mine on its a bit fiddley it took me hour half 😂

• 
  @TonysGarage_UK26 күн бұрын

  I bet it's perfect though!

• 
  @andrewcampbell826527 күн бұрын

  Can you get a tow-ball to use in that fitting?

• 
  @TonysGarage_UK26 күн бұрын

  Not sure.. that's a slightly older model. Maybe the new ones do?

• 
  @AnnDentistАй бұрын

  Thanks

• 
  @TonysGarage_UKАй бұрын

  No problem. Cheers

• 
  @user-so7fl9ii1iАй бұрын

  I've used one of these and towed a metric cruiser several thousand miles around Europe. It's main advantages are storage, easy reversing and on Brittany ferries it is treated as a bike rack. The main cons are; it's fiddly to set up, it has no suspension, unless the trailer and vehicle are on the same level plane you can't raise the platform high enough to remove or refit wheels. You can't detach the trailer while it it loaded.

• 
  @TonysGarage_UKАй бұрын

  Good to know about the ferry! Thanks

• 
  @brandmotivoАй бұрын

  Tony I like you. Can I come round for a cup of tea, a scone and chat about scooters?

• 
  @TonysGarage_UKАй бұрын

  I like your comment 😆

• 
  @luckylucking7175Ай бұрын

  At embarkation you said get in the correct lane and you followed one marked "High" is that right one for my low car?

• 
  @TonysGarage_UKАй бұрын

  Not many cars lower thsn a Lotus so I think you'll be fine.

• 
  @TotalitetАй бұрын

  I have problem that my rear door windows are not working, and rear and trunk locking i think wires are fine, where should i look next?

• 
  @TonysGarage_UKАй бұрын

  Have you checked the fusebox?

• 
  @TotalitetАй бұрын

  @@TonysGarage_UK yep..

• 
  @rodneygunn788Ай бұрын

  Be nice to review at 10000miles

• 
  @TonysGarage_UKАй бұрын

  Yep.. hopefully it won't take me too long!

• 
  @andrewfrost8422Ай бұрын

  Brilliant , thanks

• 
  @TonysGarage_UKАй бұрын

  You're welcome!

• 
  @gavcat2382Ай бұрын

  Are you sure it's not got a sil gp200 engine init?😉

• 
  @TonysGarage_UKАй бұрын

  It's certainly possible.. figures would suggest that, but others have told me it will be a 150.

• 
  @gavcat2382Ай бұрын

  @@TonysGarage_UK whatever the capacity Tony, I really enjoyed the different runs and results

• 
  @MrCamohojАй бұрын

  Great video Tony as per usual lots of useful info.👍🛵

• 
  @TonysGarage_UKАй бұрын

  Thanks 👍

• 
  @waynenewcombe7434Ай бұрын

  Thank you very much Tony. That's going to help . Once fault found make a note of fault code clear . ride fingers crossed doesn't come back . Excellent information and video

• 
  @TonysGarage_UKАй бұрын

  Yep, that's it. Fingers crossed on both hands 😆

• 
  @Ged-TG125Ай бұрын

  Thank you 👍

• 
  @TonysGarage_UKАй бұрын

  You are welcome

• 
  @Ged-TG12514 күн бұрын

  @@TonysGarage_UK just had a recap , doing my tg125 tomorrow. mines just started getting sticky

• 
  @TonysGarage_UK10 күн бұрын

  Good luck!

• 
  @Battismore-BlueАй бұрын

  You must have knees of steel , well done

• 
  @TonysGarage_UKАй бұрын

  Haha.. thank you

• 
  @bryanmceneaneyАй бұрын

  Should have asked here, is the indicator flasher relay in amongst that cluster you pointed out? Love the channel

• 
  @TonysGarage_UKАй бұрын

  Yep. In the headlight cluster.

• 
  @bryanmceneaneyАй бұрын

  Hi Tony, not really related but I’m having issues with my indicators. Would you know where I’d find the flasher relay?

• 
  @TonysGarage_UKАй бұрын

  I think it's in the head light cluster... I'll have to look back at the video lol

• 
  @bryanmceneaneyАй бұрын

  @@TonysGarage_UK I think you’re right. A few people in the club are having problems with indicators. Thanks for getting back. Our rally is this weekend. Lads coming from England, wales and Belfast. Maybe we’ll see you in Dublin next year. Plenty of fans of yours in the club (pitstopkrew)

• 
  @kevinmoxon45532 ай бұрын

  Hi Tony can I ask mate I had to strip the brake reservoirs off my ra gp200 as I was having the full scooter repainted and also undone the pipes at the bottom of the calipers(now having to get new crush gaskets' going to replace all of them) we tried topping up the brake fluid and bleeding it for around 40 minutes with no joy were getting bits of fluid through but still no resistance on the levers do you think this maybe a crush gasket letting air in? Or something else? Thanks kevin

• 
  @TonysGarage_UK2 ай бұрын

  I would say bleed at the brake reservoir.. It's tricky to do, but sounds like you have air there. And have you tried the reverse flow method?

• 
  @kevinmoxon45532 ай бұрын

  @@TonysGarage_UK I've not yet I will try that though brilliant thankyou I'm also going to change the crush washers on the calipers incase it's those aswell

• 
  @TonysGarage_UKАй бұрын

  Yes, good idea. Good luck

• 
  @kevinmoxon4553Ай бұрын

  @@TonysGarage_UK hi Tony we did it the rear is still a tiny bit spongey will test it tonight again' we had to put plumbers tape round the bleed nipples on both calipers as it seemed to be drawing in air on them both. Once we did that it started to work then 🙂

• 
  @ynbearljx2 ай бұрын

  I watched over 10 videos trying to learn hownto ride a vespa so far this is the best one, so useful thank you!

• 
  @TonysGarage_UK2 ай бұрын

  Great to hear! And enjoy your scooter when you get one.... if you haven't already! Thanks

• 
  @ynbearljx2 ай бұрын

  @@TonysGarage_UKThank you. I bought one today unfortunately the plastic gear number mark is worn off. I want to buy a new metal one like yours in the video, but when I search “clutch lever” I only get levers on the shopping website, may I check what is the correct name of the part please?

• 
  @TonysGarage_UKАй бұрын

  I think its called the Gear Selector Housing. For a Vespa?... this might help.. ve-uk.com/wp-content/uploads/2018/01/Vespa-PX-T5-Parts-Book.pdf page 23 has the diagram. Fowlers is also a good website for exploded diagrams.. www.fowlersparts.co.uk/manufacturer/vespa/bike/vespa-px-125/year/2007-2016/model/vespa-px-125-chassis-number-prefix-zapm74100/country/all-countries

• 
  @ynbearljxАй бұрын

  @@TonysGarage_UK Thank you ever so much

• 
  @pbi212 ай бұрын

  Thanks for the vid I live in New York can i buy one for my trip to Italy next month

• 
  @TonysGarage_UK2 ай бұрын

  I would have thought so, they send them all over the place. Just check their website www.bipandgo.com/en/

• 
  @joh83792 ай бұрын

  Hy man, first of all thank you so much for what you are doing for the community. Your videos are so valuable to us. I got a question though, do you fiddle it all back to factory when you have to go through emissions testing? Cheers from Krautland 🇩🇪🍻🇬🇧

• 
  @TonysGarage_UK2 ай бұрын

  Hi, thanks, that's really appreciated! No, I couldn't even I wanted to, for the emissions testing, I could put the original exhaust end can back on, but as of yet, I've not needed too.

• 
  @exgtt20612 ай бұрын

  Sliders need to be a gram lighter than the equivalent roller to equal. Sliders often have a 2nd wind at higher speeds when the variator is maxed out. I’d say the sliders need to be a gram lighter, they would then be a better competitor in the 0-60. It’s impressive cutting nearly 2 secs from essentially an air filter, exhaust and remap. In a car that’s probably another 30-50bhp for the same gain.

• 
  @TonysGarage_UK2 ай бұрын

  30 to 50 gain, I'm loving that. but seriously, thanks for that information. I went with the Tasso recommended package, Adam has done a lot of testing and I trust his advice. Safe scootering!

• 
  @exgtt20612 ай бұрын

  @@TonysGarage_UK Of course 👍 that chap knows a lot more than me

• 
  @TonysGarage_UK2 ай бұрын

  lol... always good to get other peoples advice!

• 
  @NightfallDrives2 ай бұрын

  Great to see you using the Evora for this sort of thing - ideal machine for the job. Let me know if you might like to feature in my owner stories series of driving videos 👍😎

• 
  @TonysGarage_UK2 ай бұрын

  Definitely something I would be interested in. Cheers

• 
  @NightfallDrives2 ай бұрын

  @@TonysGarage_UK thats great, thanks Tony, always a pleasure to have another Lotus on the channel. My details are on my page if you'd like to get in touch 👍😎

• 
  @TonysGarage_UK2 ай бұрын

  I've got a busy few months coming up but hopefully we can do something in the not so distant future

• 
  @graeme96792 ай бұрын

  Thank you mate, just performed this mod on my Landcruicruiser 200 with Extnix head unit 👍👍🇦🇺, Greetings from Downunder.

• 
  @TonysGarage_UK2 ай бұрын

  Glad it helped,. cheers

• 
  @youngandrew662 ай бұрын

  Thats great. Its a scooter, that'll do nicely

• 
  @TonysGarage_UK2 ай бұрын

  Yes it will. Cheers

• 
  @db9552 ай бұрын

  Hi , was the screen worth it , partner has a street triple and is looking for a different screen

• 
  @TonysGarage_UK2 ай бұрын

  Yes, I thought so. I felt it made enough difference to make it a good worthwhile upgrade!

• 
  @raygeary16982 ай бұрын

  Can't you get wheel lock like the vespa 300. Ie. Easy lock

• 
  @TonysGarage_UK2 ай бұрын

  My Lock won't fit through the small spaces between the spokes, But yes, I'm sure there are other options. Cheers

• 
  @mememetal6662 ай бұрын

  That wasn't necessary there is a boot option in factory settings

• 
  @TonysGarage_UK2 ай бұрын

  It didn't work unfortunately.

• 
  @alphonsuswells17722 ай бұрын

  Just starting out bought my scomadi 50cc hopefully up it next year 125 but looks a great day out well done

• 
  @TonysGarage_UK2 ай бұрын

  That's excellent! Have fun!

• 
  @alphonsuswells17722 ай бұрын

  I know this is a year old but just fitted one to my scomadi didn't have to undo tool box wires where there mind only about a inch but thanks for this video I've watched them all

• 
  @TonysGarage_UK2 ай бұрын

  That's super, well done, and cheers!

• 
  @hadrianbird26452 ай бұрын

  Did you know that the German word for exhaust is AUSPUFF!? Sounds a bit rude if you ask me 😂

• 
  @TonysGarage_UK2 ай бұрын

  Everyday is a school day!

• 
  @hadrianbird26452 ай бұрын

  @@TonysGarage_UK you’re welcome 👍

• 
  @LosingThePlot2 ай бұрын

  Hi do you think you would be able to fit an older vespa on here such as a vb1 ? Wider frame and wider panels ?

• 
  @TonysGarage_UK2 ай бұрын

  I would say, its designed for big bikes, and of course the Royal Alloy is a wide Scooter too

• 
  @mammanpoika86642 ай бұрын

  Is mt-125 2017 model good?

• 
  @TonysGarage_UK2 ай бұрын

  I think it's the best 125cc on the market! We looked around for ages and tried lots, including the cheaper makes... this was far better and quicker and economical.

• 
  @chrislawton54862 ай бұрын

  Hi Tony, do you still own it? any problems so far?

• 
  @TonysGarage_UK2 ай бұрын

  Hi, Yes, nearly 2 years later and still loving it! As far as problems... see my videos on Steering Head bearings and centre stand lubrication, both common problems but easily fixed if done early enough.

• 
  @chrislawton54862 ай бұрын

  @@TonysGarage_UKHi Tony, How many miles have you done so far?

• 
  @TonysGarage_UK2 ай бұрын

  just coming up to 2000 miles

• 
  @Ged-TG1252 ай бұрын

  Great vid Tony, was a top day that. Worth the trip down ther getting soaked for a sunny Tenby. 👍

• 
  @TonysGarage_UK2 ай бұрын

  Yes it was, we were lucky with the Sun Gods that day!

• 
  @Bammer20012 ай бұрын

  Were you driving a white Lotus Elise?

• 
  @TonysGarage_UK2 ай бұрын

  Close, Lotus Evora

• 
  @Bammer20012 ай бұрын

  @@TonysGarage_UK Cheers, mate. 😝

• 
  @carljackson28772 ай бұрын

  It is a bit too late for me!, trying to get the bike off the center stand, after a mot. A slight tap with a hammer worked, A week later looks like, I have, cracked something, oil pouring out when I started it this morning, unsure how much damage I have done

• 
  @TonysGarage_UK2 ай бұрын

  Oh no! That could be expensive! Sorry to hear that.