Пікірлер

• 
  @reclessanticsКүн бұрын

  Stupid question, I’ve heard there’s some fitment issues. Is this 420 meant for 360mm locations?

• 
  @jackshardware16 сағат бұрын

  No it won't fit. It is a true 420mm.

• 
  @RaykonDien3 күн бұрын

  Does liquid comes in cooler or i have to buy that separate?

• 
  @jackshardware3 күн бұрын

  All AIO's come prefilled.

• 
  @pxlst84094 күн бұрын

  What's the name of the case please

• 
  @jackshardware4 күн бұрын

  Corsair 7000D.

• 
  @Akkazoun6 күн бұрын

  Nice one jack!. Can i fit this in my 011 dynamic mini?, im using micro atx board

• 
  @jackshardware6 күн бұрын

  You will have to go with a 360mm for your case. Still really good performance compared to the 420mm.

• 
  @XiLock_Alotx6 күн бұрын

  Just purchased this for my build. From what I understand and have read, this cooler is S tier compared to what the competition has on offer

• 
  @jackshardware6 күн бұрын

  From what I have seen, it does the best job cooling.

• 
  @Rako101277 күн бұрын

  Hi nice video does it comes with separate 8 pin cables? I want it for rx 7900 xt it has two 8 pin connectors I don't want to daisy chain my GPU they say it's bad thanks

• 
  @jackshardware6 күн бұрын

  It comes with 3 - 8 pin pcie connectors.

• 
  @Rako101276 күн бұрын

  @@jackshardware i know but are they separate?Not daisy chained? Thanks

• 
  @jackshardware6 күн бұрын

  ​@Rako10127 they are separate.

• 
  @Rako101276 күн бұрын

  @@jackshardware ok thanks ❤

• 
  @ibbyilyas52827 күн бұрын

  This many not be relatedWhat is a good idle temperature for a ryzen 5 7600x my ones around 43 degrees and cpu stress test the max is 90 degrees

• 
  @jackshardware7 күн бұрын

  Idle should be less than 40 (depends on how many background apps are open) max temp should be lower than 90. Make sure you took the plastic off the bottom of the cooler, reapply thermal paste, and reseat the cooler.

• 
  @aiz28447 күн бұрын

  so how was it so far sir? no issues so far?

• 
  @jackshardware7 күн бұрын

  No issues so far.

• 
  @thiscrakaslug8 күн бұрын

  I was looking for this video like a year ago! Now I'm really interested in measuring the better of these two units versus thermal rights El cheapo liquid cooler

• 
  @jackshardware7 күн бұрын

  I got the phantom spirit evo I hope to test soon.

• 
  @rezo8568 күн бұрын

  Bro can you please tell me. Will this cooler work perfectly for cooling my ryzen 9 5950x? Sadly my aio died too soon. I do gaming mostly but sometimes I do productivity.

• 
  @jackshardware7 күн бұрын

  I don't think it will be a problem to cool while gaming. For productivity, I'm not entirely sure. If the software you are using is able to utilize all cores, it might get hot.

• 
  @rezo8567 күн бұрын

  @@jackshardware What do you suggest than?

• 
  @jackshardware7 күн бұрын

  ​@rezo856 thermalright has some good inexpensive 360mm aio. They cool better than air.

• 
  @rezo8567 күн бұрын

  @@jackshardware How can I rely on aio when I just said my aio died too soon. Also I was using thermaltake's 360mm aio. I think aios really do have problems.

• 
  @Quarttzzzz5 күн бұрын

  @@rezo856 how soon? Contact manufacturer if possible and get it replaced. AIO is always going to be the better option for higher end CPUs . If you're only going to be gaming, you'll be fine with this air cooler. If not, find a solution to your AIO problem or go with another AIO brand.

• 
  @Ghost-ey8wm9 күн бұрын

  question I have a 5600g with a 7800 xt and I am thinking of either going to 5900x or Ryzen 7 5800x3d which CPU do u think is better for gaming

• 
  @jackshardware9 күн бұрын

  The 5800x3d is the better gaming cpu. Paired with a7800xt at 1440p you probably won't notice any difference, so I would go with whatever is cheaper. Even a 5800x would probably be more than enough.

• 
  @Dnyanesh-10 күн бұрын

  Lenovo tab P 11 (11.5 inch) ke liye batao bhai plz

• 
  @TheTactialLlama11 күн бұрын

  Looks to be exactly the same as their air coolers for the mouting soloution.

• 
  @jackshardware11 күн бұрын

  I think I tried to mount it using the peerless assassin hardware, but it didn't make good contact with the cpu.

• 
  @TheTactialLlama11 күн бұрын

  @@jackshardware ah dang, I was hoping to save myself some time and effort. Fair enough

• 
  @jett_st11 күн бұрын

  Thanks!! +1 Sub :)

• 
  @jackshardware11 күн бұрын

  Thanks

• 
  @domi762612 күн бұрын

  I removed the vrm fan like you, and my pc restarted.. Idk what happened. But nothing changed since that.

• 
  @na-donu12 күн бұрын

  what is the case name?

• 
  @jackshardware12 күн бұрын

  Corsair 7000D. It's a big boy.

• 
  @na-donu12 күн бұрын

  @@jackshardware thanks

• 
  @_2A_13 күн бұрын

  How does this compare to Corsair ih170

• 
  @xsiwizz.13 күн бұрын

  Pump cover looks super ugly imo… but if it has good performance, I’ll still take it lol

• 
  @jackshardware13 күн бұрын

  Depends on personal preference. The vrm fan does work at cooling the vrms.

• 
  @jcnikoley14 күн бұрын

  What case is that? I'm looking for one to top mount a 420 like that.

• 
  @jackshardware13 күн бұрын

  Corsair 7000D

• 
  @thunderstormaway543814 күн бұрын

  does it have screws for tightening radiator to case? or i need to buy it somewhere

• 
  @jackshardware13 күн бұрын

  It comes with everything you need.

• 
  @koppennnn15 күн бұрын

  Did thermal paste come with the cooler?

• 
  @jackshardware14 күн бұрын

  Yes it does.

• 
  @WASD-SamZ_YT17 күн бұрын

  Does the fan spin?

• 
  @jackshardware15 күн бұрын

  The top part isn't a fan. It's inside and barely visible from the top.

• 
  @WASD-SamZ_YT15 күн бұрын

  @@jackshardware why it look like a fan lmao

• 
  @Abdullah______18 күн бұрын

  it can fit 120 mm cooler or it will touch the glass?

• 
  @d-abyz856521 күн бұрын

  does the apollo e2 elite come with standoffs pre installed. I read on the amazon description and reddit, some say there isn't

• 
  @jackshardware19 күн бұрын

  I can't remember if they were pre installed or not, but it did come with them.

• 
  @d-abyz856519 күн бұрын

  @@jackshardwareyea it arrived today and they were pre installed. Btw would it be possible to add fans on the bottom, cause I seen ppl with the same case install intake fans on the bottom, currently I am maxed with 5 fans, was wondering if I could add at least 2 more

• 
  @jackshardware18 күн бұрын

  ​@d-abyz8565 it looks like it can hold 2 120mm fans but I doubt they will do much good. They are above the psu and not pulling any air directly from outside the case.

• 
  @notevoms21 күн бұрын

  i thought the lga1700 contact plate installation was pretty simple even though the instructions aren’t great. The liquid freezer II was worse to install overall imo

• 
  @S.A.D.i.S.T.I.C22 күн бұрын

  does it come with rgb controller?

• 
  @jackshardware21 күн бұрын

  No it doesn't.

• 
  @saylanavci884622 күн бұрын

  Hi, which one do you think is for Intel 13700k? Noctua NH-D15S Thermalright peerless assassin 120 thanks...

• 
  @jackshardware22 күн бұрын

  Either one will give a similar performance.

• 
  @miniyoshi615725 күн бұрын

  #weloveteamred

• 
  @jackshardware25 күн бұрын

  For budget builds, team red all the way.

• 
  @DavidDias-cn7fe25 күн бұрын

  Hi there, I’m from Portugal. I’m completely new to this. I bought a ASUS ROG Hyperion GR701 case with I9 14900K CPU and a ASUS ROG MAXIMUS Z790 FORMULA motherboard. I’ve read that there is some sort of incompatibility due to the M2 Gen5 height. How do I install this AIO in my board? Can you help me please?

• 
  @jackshardware25 күн бұрын

  I don't think there is anything you can do. The way the tubes stick out of the cpu block will interfere with the m.2 heat sink. I think you need an aio where the tubes exit the cpu block facing the ram. Without having that specific motherboard I am not 100% sure.

• 
  @acdc2626 күн бұрын

  Just bought this case, not sure where the cord for the front fans is and where it plugs in?

• 
  @jackshardware25 күн бұрын

  There is a sata connector that connects directly to your psu.

• 
  @limoubai26 күн бұрын

  can we change the rgb ?

• 
  @vitalichachukha368026 күн бұрын

  Hey, should this fan spinning? I have issue that it's not spinning, and i'm not even sure is it should? And your fan doesn't spinning too

• 
  @jackshardware26 күн бұрын

  The fan is on the inside. The top looks like a fan, but it isn't.

• 
  @onimashou870528 күн бұрын

  Pair it with the newly released P14 Max fans

• 
  @Veederlicht29 күн бұрын

  Usefull, thanks

• 
  @omgninja66Ай бұрын

  All depends on your budget

• 
  @DurolithАй бұрын

  5700X3D

• 
  @jackshardwareАй бұрын

  Highly unlikely you will find a used 5700x3d

• 
  @DurolithАй бұрын

  @@jackshardware did actually see one 50$ lower than new

• 
  @fafnirymdАй бұрын

  wait, you don't need to connect anything from the rad fans to the board?

• 
  @jackshardwareАй бұрын

  Nope. The rad fan cables run inside the water pump tube to the cpu block.

• 
  @fafnirymdАй бұрын

  @@jackshardware wth?

• 
  @jackshardwareАй бұрын

  Well not inside the actual tube but the sheathing that goes around it.

• 
  @SethOmegafulАй бұрын

  Hi. I'm sorry, I still have the impression that the SE version has the same height if you consider the heatpipe tips. Did you considered the tips of the heatpipes or only the heatsink fins? I'm still not convinced that it really is 155mm. If the non se version fits my case, I would like to go with that.

• 
  @alfador66Ай бұрын

  I need a controller rgb to start the light?

• 
  @jackshardwareАй бұрын

  Nope. Plugs right into your motherboard argb connector.

• 
  @NoceeАй бұрын

  is it enough for a 220w max consuption ?

• 
  @jackshardwareАй бұрын

  My 5900x hits 200 watts and it can handle that. It should be able to handle 220.

• 
  @marksouza1170Ай бұрын

  On the 7000D if you get a 3.0->2.0 adapter you can access all 4 usb spots at the top

• 
  @robertwallen3Ай бұрын

  so just a question, I currently have the 5600G with a RTX 3060 12gb that I got on sale a little over a year ago for around $230 ish. would it be worth it to buy the 5900x right now or should I wait until I'm able to afford to move onto the next socket (AM5) Full PC Specs: Motherboard: ASUS B450 Prime A-II CPU: Ryzen 5600G RAM: PNY 32GB 3200mhz (2x16 Dual Channel) GPU: RTX 3060 Ventus X3 C: Drive: Samsung 970 EVO Plus (2 TB) Hard Drive: Western Digital Blue 2012 (1 TB) 650 Watt PSU (I forgot what brand, and I honestly don't feel like unscrewing my pc)

• 
  @jackshardwareАй бұрын

  Upgrading to a 5900x new wouldn't be worth it. It would be worth it to upgrade to a used 5700x or 5800x and sell your 5600g. They are more powerful, and the extra cores will help smooth out gameplay in cpu demanding titles. Down the road if you want to upgrade to a mid range 1440p card, you will not need to upgrade your cpu.

• 
  @robertwallen3Ай бұрын

  @@jackshardware thank you

• 
  @INMATE_0801Ай бұрын

  Any tips to avoid destroying an AMD mobo with the leaf spring issue? I'm still currently AM4 - I've seen quite a few complaints regarding installation with AM5 compared to Intel... I keep coming back to the LF3.

• 
  @jackshardwareАй бұрын

  Make sure the screw driver is a snug fit. Lightly thread one side then make sure the other side is lined up. Just be slow and careful when applying pressure on the other screw.

• 
  @INMATE_0801Ай бұрын

  @@jackshardware thanks mate

• 
  @dummesreh4848Ай бұрын

  Is there already Cooling Fluid in it?

• 
  @jackshardwareАй бұрын

  Yes it's prefilled. All aio's are prefilled.

• 
  @Mr_Puff03Ай бұрын

  I will run 2600x with rx 7700xt till I get money for a r5 7600. I will try resolution upscaling to get the cpu some chill

• 
  @jackshardwareАй бұрын

  I would just upgrade to a 5800x and you'll be all set with your 7700xt.

• 
  @jayprosser7349Ай бұрын

  Yes. Turbo unlock, under volt 70/50 and run quad channel at 2133mt/s cl12-12-12 for an extra 10-20%. Good for up to rtx 3070 Rx 6750xt 4060ti Rx 7600xt maybe Rx 7700xt

• 
  @R3AL-AIMАй бұрын

  Honestly not bad for emulation or a cheap workstation for 1080p video editing/in-depth photography work. The instruction set on video game emulators (like PCSX2) work really well with Xeons, because most of the game is rendered on the processor, while the GPU is basically tasked with streaming it (So depending on resolution, the CPU is always going to be the bottleneck - an RX550 4GB is capable of 1440p/4K PS2) A healthy dose of cores + clock speed helps, as much of emu works more like production software rather than traditional game engines.

• 
  @jackshardwareАй бұрын

  That is a good point. I never thought of testing with emulators. I'll have to give it a try. I tested it in cinebench, and its scores were not that great, but it would be sufficient for a budget video/ photo editing pc.

• 
  @AndreasRoth-yn6leАй бұрын

  Hi, how does an old Xeon holds Up with for a Budget 1080p - (4k?) Video editing? No onboard Graphics i guess but can It do all coding stuff and wouldnt IT be also good for capture & Streaming (Twitch) XSX & PS5 gameplay in? Thx in regards...

• 
  @MrModamanАй бұрын

  Fortnight runs worse than Halo because it's a UE5 game.

• 
  @jackshardwareАй бұрын

  I still wasn't expecting it to be so cpu demanding on performance mode.

• 
  @lawrenwimberly7311Ай бұрын

  I'm running an x79 cheap Chinese mb combo with 16 mb server mem with a 4 core xeon for 79 dollars... 54 dollars gained me 2697 v2... added an Rx 7600 (which gained me starfield) total cost was around 340 dollars total, and I get 100 average fps at medium textures.... I did set windows to performance mode so it runs at 3 ghz all core