Пікірлер

• 
  @Koexistence138 күн бұрын

  Dash lights out. Not the fuse. Any suggestions?

• 
  @Koexistence138 күн бұрын

  Oil pressure guage is wonky. Thanks for this bro

• 
  @adventureslim401618 күн бұрын

  does that relay work the left and a right signal?

• 
  @williamross84052 ай бұрын

  Some video of you mounting them would have been very helpful...

• 
  @Keeterbob3 ай бұрын

  What is the ohms reading across the resistor on the board?

• 
  @steffyhobmann50373 ай бұрын

  💯💯💯💯💯💯💯💯💯💯

• 
  @Olhighclass3 ай бұрын

  Watch us pull the 350 TPI engine out 👌🏿

• 
  @Olhighclass4 ай бұрын

  #Fbody #Camaro #Chevrolet #3rdgencamaro #LsSwap #IrocZ #IrocCamaro

• 
  @MrGabriel9164 ай бұрын

  What kinda spacers do you have?

• 
  @keithmaupin92824 ай бұрын

  Thank you for the information it works 👍

• 
  @brspeedysgarage5 ай бұрын

  Funny how the word “chrome “ gets generically used in place of polished surfaces.

• 
  @airsoftmandalorian28818 ай бұрын

  Was my dream car, then I made it my reality car and I LOVE driving it! So happy I could buy one!

• 
  @rudolfoduran49148 ай бұрын

  Needle noes pliers with duck tape you can get bulbs

• 
  @Pete3918 ай бұрын

  Factory Iroc rims look better than any other rim you can put on an Iroc period..........

• 
  @Olhighclass8 ай бұрын

  Thanks for watching !

• 
  @theboneyard998 ай бұрын

  Is this on stock springs/ height? Do we trust big spacers on these cars? 😬😅

• 
  @Olhighclass8 ай бұрын

  Stock springs and height I’m thinking of selling these wheels and getting some welds not really the biggest fan of spacers

• 
  @theboneyard998 ай бұрын

  @@Olhighclass i put a similar setup on my car this past weekend with C5 Wagon Wheels, I just dont love the spacers. Did you extend studs?

• 
  @Olhighclass8 ай бұрын

  @@theboneyard99 no I didn’t have to once every month I did re torque the spacers to make sure they didn’t come loose or anything but that’s just me being picky. Never had a issue with them.

• 
  @GearScar8 ай бұрын

  When I use my left turn signal it turns on 4 way flashers, I ordered a new relay (small black box different from your flasher part) will this fix it?

• 
  @Wpbandy8 ай бұрын

  i cant wait to finish mine . i just got the wheels i wanted to see what they would look like and i came across on a white one .awesome

• 
  @Olhighclass8 ай бұрын

  Thank I appreciate it good luck with your build as well.

• 
  @Wpbandy2 ай бұрын

  @@Olhighclass I just put them on . Did it on billet 1 3/4 spacer fit like money

• 
  @Olhighclass2 ай бұрын

  @@Wpbandy easy money 💰

• 
  @as28100 Жыл бұрын

  Nice video bro! Question do you think this can relate to the fuel gauge and oil gauge as well? Both aren't working on mine. I got an 89 RS.

• 
  @SwagMasterT179 ай бұрын

  Did you give it a try?

• 
  @as281009 ай бұрын

  @SwagMasterT17 I did but I think my instrument cluster is messed up

• 
  @doctordishes2es Жыл бұрын

  That good but gto seats are better

• 
  @JosePerez-ug4ue Жыл бұрын

  Definitely going to try this. I just changed the blub and it didn't wotk.

• 
  @trichomeboss2731 Жыл бұрын

  Hey bro how much did you pay for yours?

• 
  @Olhighclass Жыл бұрын

  The car?

• 
  @trichomeboss2731 Жыл бұрын

  @@Olhighclass yea the camaro

• 
  @Olhighclass11 ай бұрын

  @@trichomeboss2731 $7950 back in 2018

• 
  @Yellow_85Z28 Жыл бұрын

  Your local 😎bad ass burnout

• 
  @Olhighclass Жыл бұрын

  You’re in the Wichita are?

• 
  @frankkjllefjord446 Жыл бұрын

  i hate spacers

• 
  @Airmarty23 Жыл бұрын

  Video was helpful, I just got back from buying that part I hope if works .

• 
  @MyC4Corvette Жыл бұрын

  Badasss

• 
  @hinsie4268 Жыл бұрын

  All my lights and gauges work accept for my mph gauge.

• 
  @Olhighclass Жыл бұрын

  You should check your speedo gear on your transmission

• 
  @blue454ss8 Жыл бұрын

  I will like that all dirty and oil because that is good protection for salt and rusty in some state where there is snow than the paint work for little while than start come out from scratches and moisture in my truck i spray burn oil proposed all body and work very well and i drive my truck 26 years in salt,dirt, snow and i not have rusty on the body

• 
  @NATIVEWARS Жыл бұрын

  thanks for the video and live 3rd gens

• 
  @foreverfree6685 Жыл бұрын

  I have those wheels on my c5 gonna put them on my 92 Camaro and put my c6 wheels on my c5, my tires on the wheels are 275 front 295 back so fyi 275 fits the rim

• 
  @SuperMan-fd4rv Жыл бұрын

  Nice video on the fix! I am not sure what you were saying when you called LS7 heads trash, they are among the best of the LS family. If the Z28's and Z06's blowing up motors, it isn't the heads fault. If they are adding power to the engine and not doing any upgrades to the heads, it is their fault. Porting and polishing those puppies should get them what they need. LS3 and LS7 heads are almost identical castings, except the LS7's run a bigger valve. In stock form it is hard to beat em!

• 
  @ericbobadilla7785 Жыл бұрын

  Dude this helped me out! Thank you for sharing! 87 Camaro blinkers saved!

• 
  @lordgreekdip5116 Жыл бұрын

  This is why this is my dream car!!!🔥💨

• 
  @stevenhall9009 Жыл бұрын

  Apparently my gauges are whores

• 
  @ambercutler6916 Жыл бұрын

  I just got an ‘87 iroc z28. Your channel is now my favorite thing to watch because my car has the same (or very similar) issues

• 
  @HashiriyaSquadron Жыл бұрын

  Thanks man. I hope it's this simple on my 85.

• 
  @juniororejel894 Жыл бұрын

  I just bought a 1991 camaro Z28, its been lowered 2 inches front and rear. Wonder if i can still swap the stock wheels with the corvette wheels.hope anybody can answer me this question plz

• 
  @Olhighclass8 ай бұрын

  The rear might be a stretch tbh as far as fitment

• 
  @turbojunki Жыл бұрын

  That’s a good look for real.

• 
  @jimmoravec1326 Жыл бұрын

  Yea they look great 👍

• 
  @maxpain9111 Жыл бұрын

  Damn that looks sweet nice ride bro

• 
  @alcapony7322 жыл бұрын

  Looks good!

• 
  @youtube_lazybum53562 жыл бұрын

  i just start really working on my 3rd gen, loving your vids keep it up 👍🏽

• 
  @angelsworld92962 жыл бұрын

  thanks for the info bro, not a lot of wheel and tire fitment info for third gens out there 🤘🏾

• 
  @dylanpfeiffer86392 жыл бұрын

  I’m about to replace my temp gauge. Do I have to disconnect anything with the air bag?

• 
  @jam92352 жыл бұрын

  It's funny when people talk about the car losing value when you change out the original components. Guys, these care aren't worth much to the collector and probably never will. These cars are perfect the way they are because of the price you pay for them. But and it's a important point, being less expensive then a first or second gen means we can afford them. Another but is that they need upgrading. They're pretty low on power and the interior is a bit chincy. So don't worry about what people say. Go ahead and customize them for "you". When it comes time to sell them, just let people know what you've put into it and go from there. No one gets their money back on this kind of thing. Enjoy and let the nay sayers say what they want. Enjoy and cheers from Canada

• 
  @MsHitemup082 жыл бұрын

  If you notice when you pulled out your gauges and those little round turn signal is supposed to be a green plastic piece in each one of them so you put everything back together your turn signals on the outside of the bezel is supposed to be green

• 
  @christopherhayto10892 жыл бұрын

  Hi thanks for the tip i fixed my faulty fuel sender by cleaning contacts

• 
  @fatmirsejdini59922 жыл бұрын

  Great video. Bout to fix mine, sane exact problem

• 
  @darylwalton86222 жыл бұрын

  Very good but you never. Mentioned the clock in the console that only came with the custom deluxe interior and none of those cars you showed had a clock in the console order mine in 84 still have it and that clock in the console is very rare great job on your video 3rd generation is a great car

• 
  @davebarron59392 жыл бұрын

  Its all about the planning, definitely an LS is the way to go. These are perfect candidate for that swap, tour your junk yards for a complete motor, including all the accessories, wiring, CPU, etc, etc. I used OEM manifolds i customized to fit, work fine. You can use the truck intake however, you will have to trim the support structure on the underside of the hood. Also, the truck alternator location will not fit, you will have to cut a 3+" hole in the hood. I am planning on installing hood heat extractors / vents, so i will simply incorporate them with Alt. hole. Lastly, i would suggest you watch LSXMatt on you-tube for more ideas, he does a great job. Good luck. Beautiful car.

• 
  @nicolebrandtner36662 жыл бұрын

  ｐｒｏｍｏｓｍ 😡