ATV'S, MUDDIN', BROKEN PARTS, FIX, AND REPEAT!!! all in a days work here. We are live We are alive? on the weekends we build and ride anything we can pull out of the junk pile, there will be some good trail riding, good informational guides, and some all out craziness well we attempt to have a good time. posting days will be on Wednesdays. stay tuned for new content
Пікірлер
justpicked up mine last weekend absolute beast of a machine.......totally gonna mod the shot out of it first things first gotta extend the snorkel kits
Is it go fast time yet ?
Next video!!!
Just got mine as well. Can’t wait for the first ride!
I just picked up the same in may but got the silver color
That was the color I was looking for!! I was told they just sold the last one they had and I would have to wait until August for a shipment….👎 I went with red… lol
break in period on my 850 was exhaust/ tune and going 90mph down the highway 😂
Break in on all mine was 1 hour of easy riding. After that the tune goes in and I rip it like I stole it. Enjoy love Roush's ! Live in Niles so it's not far. Peace The tunnel under road is where we take a 420 break lol
Nice brother I got the cfmoto 1000cc Awesome quad congratulations
Im gonna get one of these, seems like some really good fun. Got my daily gonna be a great addition.
What park
This event too place at roush off-road park in sturgis
Hillbillies rules
I bought a 1985 Suzuki LT250EF from a neighbor kid who beat on the thing. I've had it sitting in my garage for four years, and I'm finally getting close to having it running again. I removed the muffler and exhaust pipe to repair it, and broke off the exhaust bolts in the process. I'm currently rebuilding a used head due to complications getting the exhaust bolts out. When removing the head, I accidentally unsealed the jug base gasket. I'm slowly forcing myself to replace all the seals. I can't wait to drive the thing.
Fuck yes Twelve Foot Ninja 😎🫶🤘🤘🤘
Go red freak
I'm pulling all the wiring on mine and going through it by hand
I should have done the same , now we have a wiring issue with this unit
We did this when we were 13.lol
Very nice 👍🏻 nice backyard setup as well. Keep up the vids and they will come.
I have an opportunity to buy an 86 Silver Wing (no title) and an 81 CX500 running with a title. Is it possible to build a silver wing out of the 81 CX by swapping the tank and seat and mounting the faring, saddlebags and trunk from the 86?
I had a 1985 Honda 125 and it drove real good and I had I gave it to a the buddy of mine for his kid and he put everything new on it he said he still runs good
Soup bowl fun!!!
It was so much fun!!!
I have the very same bike , love it , having trouble finding carb rebuild parts, anyone know where I find them ?
Had the same one an year bought for under 1000 Great powerful. Enduro
is that a 79 atc 110? or a early 185?
1980 atc185
and i subscribed to your channel☺
great video my brother has one we call it big red and we rode it in the mud and i loved it
I love those gl500’s
Добрый вечер.У меня тоже такая красотка Honda GL 500.Классный мотоцикл не хуже GL 1800/
My dad had a 110 it was awsome
Now is this like a gold wing automatic? Please comment back and let me know very nice shape. This bike is a cream puff.
Oh hell yea
Funny story about that day ! I was there. So I get there, park at the playground area. I unloaded, warmed up the 1000cc quad. Took off rode around for maybe 10 mins. The super tall man made hill there. I went up come down, went around the curve way to fast tried to turn right hit a dirty wall flew forward hitting the throttle cause this big bitch climbed the dirt wall I let off it rolled back stopped and rolled 2 full rolls down a small hill with me. After the dust settled I was on my stomach with this 1000 pound quad landed on its wheels on top of me ! I crawled out gather the broken pieces pulled my bent bars as straight as I could. Ride back to truck loaded went home. A half hour at Roush's cost me over 200 dollars ! Lol Bro I ride there quite a bit. I should have known better.
I had a couple close calls that weekend also. But nothing like that! The atc has took a nice roll down that same hill in the past. Bent the bars pretty good
The ground in the playground was packed pretty hard that weekend. Lack of rain maybe
New rider duck walking it down the gravel road was the best bit😊
The MR is gaining value as one of the truly sought after dependable, two-stroke Enduro bikes, great investment great quality, very rideable amazing that they were made 50 years ago!
I bought an MR 175 new off the show room floor when I was a kid . Loved that bike . Went through clutches , rear tires, chains and sprockets , pistons and rings , brake shoes in the thousands of miles I put on it . Learned my real riding skills on that bike . Nice to hear that engine sound again .
That would epic to make her awd
That thing would pull so hard!!! AWD!!
What is that other monster on the right side
An actually fast bik3 lol
I recently just did a lot of work on my 1982 Honda GL500 Silverwing, and the last repair was the intake boots. I found some wraps that slide over the cracked rubber ends and used a heatgun on, wrapped it up tight and created a better seal on the carbs. would hardly get out of its way before and now clears 75 without a sweat !!. also ive found that the vibration it gets as you accelerate is due to the air box and filter, Ive installed airpods on mine and it only vibrates now when on throttle and thats all
Fix that exhaust leak an repack it an that 2 stroke will sing . 2 strokes run sluggish when u have a header pipe leak an unpack exhaust . That be cool if you can find a true expansion chamber an fmf pipe or pro circuit for it
Agreed. It needs an exhaust overhaul for sure!!!
So quick question. I have the same bike and my sprung a coolant leak today but it sprayed all over my knees which makes it further up. I’m just learning bikes and have already done a lot to it. So my question is what is the other spots that it would be possible to leak from?
On the left hand side of the motor there is a coolant line that curves up by the carburetor. It connects to the water pump with a oring. That might be the issue
It’s about time plays a nice song on channel instead of that headache music that you normally hear.
Riding bikes for some decades but never knew were was a Sliver Wing. 😄
Also known as an silver wing interstate
@@hillbillyhonda 😄👍
I've had about a dozen Silverwings over the years. The last one I sold was a GL650I with 106,000 miles on the clock. IMHO it's the best bike Honda ever made. I'd still be riding it but for the parts scarcity. I do a lot of long road trips and the last thing I need is to have a unique part fail in No Hope ND. It would cost more than the bike is worth to retrieve it. I've switched to the closest thing I could find to the Silverwing. Moto Guzzi. Transverse V twin, shaft drive, 5 speed transmission, and detachable bags. One word of advise. If you get it up to 35,000 - 40,000 miles, I'd look very seriously at a new cam chain. They're not available from Honda, but you can get them aftermarket.
What a cool set up! You sir, gave a new subscriber. 😎
When I was a Police Officer back in 83 I rode a three wheeler with same engine for 4 years. Except for tires and brakes that trike ran great! I even tried to buy the trike when it was retired! Over 120,000 miles! Great idea with Flex seal great content keep up the great videos
Thank you, that’s amazing! It’s a Pretty neat old bike for sure!
Hi from France, really enjoyed your video, great bike and great music.
Thank you for the comment, there are plenty more rebuilds coming up this fall and winter! Stay tuned
throttle stuck?
225dx?
Yeah, shaft driven
Awesome footage, bro! Love it!
Flex seal for the win
Next time the kawi will be running better!