Hello good sir, Where can I find the canvas you use to seal the cedar strips? An can I ask what kind of epoxy you use to cover the canvas?
@AjBProductionsСағат бұрын
That is called fibreglass cloth and can be purchased at your local boat building supply store. I used West System epoxy resin. Cheers.
@colemccoy148115 сағат бұрын
beautiful canoe.
@AtlanticwayExplorer4 күн бұрын
Very nice job, absolutely fantastic craftsmanship. Surprised I didn’t see you fit an insulation though, why not out of interest?
@AjBProductions3 күн бұрын
Thank you! If I recall, the insulation part was just not that interesting and I needed to wear a mask so decided to skip recording it. I used Rockwool insulation and had to split it in half to fit in the 2x2” wall studs. On the roof, I was able to fit the full insulation sheet as the trusses are thicker. Cheers.
@davetyler55975 күн бұрын
Great job I enjoyed watching a Master at work Thanks
@AjBProductions4 күн бұрын
Thank you very much. I’m glad you enjoyed it.
@thomassmith92606 күн бұрын
They don’t make them like this anymore. The dying Art of The Master Craftsman. Reminds me of my Grandfather.
@AjBProductions5 күн бұрын
Thank you for your kind words.
@bgdavenport10 күн бұрын
Such a lovely creation!
@AjBProductions10 күн бұрын
Thank you! Cheers!
@MH-fb5kr11 күн бұрын
i want one, please…. BRAVO❗️
@jaimemartins817511 күн бұрын
Acabamos de adquirir uma lt 50 , estou bastante otimista com a máquina.
@AjBProductions11 күн бұрын
Congratulations! They are amazing!
@bobmillerick30011 күн бұрын
Priceless.
@albertklassen605512 күн бұрын
Excellent! That’s how you do it.
@davidhyde931012 күн бұрын
WOW. And it even floats, too. 😊 An absolute work of art.
@AjBProductions12 күн бұрын
😂 Yes it does! How about that. Thank you, Cheers.
@Tyrfingr12 күн бұрын
A fixture for an entire canoe, that is ingenious indeed.
@AjBProductions12 күн бұрын
Thank you very much!
@JLMiller41015 күн бұрын
What time frame did it take to build that, from start to finish?
@AjBProductions15 күн бұрын
It took around 150 hours to build. Cheers.
@JLMiller41014 күн бұрын
Beautiful work Sir
@sammycda18 күн бұрын
What a magnificant boat. Wow! Way too nice for the abuse I give my canoes. On another note, I think I found your Stellar Jays and Magpies. They've moved to my house in Coeur d'Alene for the summer.
@AjBProductions17 күн бұрын
Thank you very much! Good to know the birds now have a good home. 😀 Cheers from Edson, Alberta.
@JuhaPuuma18 күн бұрын
An absolute delight to watch a real craftsman forging his art. What a beautiful canoe!!
@AjBProductions17 күн бұрын
Thank you very much for your kind words.
@randycrager407424 күн бұрын
That's the most beautiful canoe I've ever laid eyes on! Thank you!
@AjBProductions24 күн бұрын
Thank you very much! Glad you like it.
@jeffreywatson353425 күн бұрын
Masterful.
@johnstark527526 күн бұрын
wow
@dbearss27 күн бұрын
These turned out great Andre. Do you know any approximate total time to build? Have you taken them out yet? I am looking at building an Angus boat kit and was thinking I may do these as a follow up project. Thanks for the video!
@AjBProductions26 күн бұрын
Thank you. Total time was around 30 hours and well worth it. I also build the Angus Oxford Wherry and these oars really performed. Sadly I no longer have the boat and oars but it was a fun project.
@peta100129 күн бұрын
Thank You for the beautifully edited video. I am a grandpa who's biggest inspirations are projects with grandchildren. If I could get, purchase or steal the rib drawings/files, it would make my day, month and the year?!?! Please, let me know if you could help?!
@AjBProductions29 күн бұрын
Thank you for your kind words. Unfortunately I don’t have the plans anymore but you can easily buy them from Bearmountainboats.com. The plans for the Bob’s Special are listed first on their website and cost just $105ca. Hope you have a wonderful time building this classic canoe with your grandkids. Cheers.
@user-ti5qy8bq9h29 күн бұрын
Very cute boat!😲👍
@AjBProductions29 күн бұрын
Thank you 🤗
@taylorwАй бұрын
Magnificent. And beautiful.
@AjBProductionsАй бұрын
Thank you very much!
@magdygirgis815Ай бұрын
Amazing Job, You are very Clever
@AjBProductionsАй бұрын
Thank you! Cheers!
@clarence4735Ай бұрын
Wow! You sir are a true craftsman. You did an amazing job and i enjoyed watching it transform into a work of art. Thank you
@AjBProductionsАй бұрын
Thank you very much! I’m glad you enjoyed watching it. Cheers.
@anterokaczanАй бұрын
Congratulations on the wonderful work, simply a show. A work by a true artist! God blesses!
@AjBProductionsАй бұрын
Thank you very much!
@standubaj8989Ай бұрын
What Iwould like to know is would you sell one?
@AjBProductionsАй бұрын
Thank you for your question however, I only built this one for personal use. I have seen hand made canoes for sale so hopefully you can find one. All the best to you.
@gamedantas8262Ай бұрын
amor pelo que faz
@user-bh1lk9rj7jАй бұрын
Beautiful boat skillfully made.
@AjBProductionsАй бұрын
Thank you very much!
@TommyMakesWood-zo3bz2 ай бұрын
The visuals in your video are absolutely stunning
@AjBProductions2 ай бұрын
Thank you very much! I’m glad you enjoyed it.
@janlesinski47192 ай бұрын
Lovely
@mts1462 ай бұрын
楽しかった!
@AjBProductions2 ай бұрын
Thank you. I’m happy you enjoyed it.
@cenkcali2 ай бұрын
It was amazing to skip the birds and watch the canoe built. :)
@AjBProductions2 ай бұрын
Glad you enjoyed it!
@AidanPhoenix_Mindpower2 ай бұрын
Do you sell them?
@AjBProductions2 ай бұрын
Thanks for the question, but no. I built this for personal use.
@jahmanoog4612 ай бұрын
Thanks for sharing. I admire the grace, beauty and functional aspects of your considerable crafting skills. Salute! Comment added for the algorithm.
@AjBProductions2 ай бұрын
Thank you very much for your compliment and the algorithm boost 😁.
@aboversite2 ай бұрын
Really superlative video editing, Andre. Which is the least of your accomplishment.
@AjBProductions2 ай бұрын
Thank you very much!!
@SANSANICH7472 ай бұрын
Великолепная работа! Какие породы древесины были использованы для изготовления?
@AjBProductions2 ай бұрын
Thank you! The strips are Western Red Cedar and the front and rear keels are Ash.
@SANSANICH7472 ай бұрын
@@AjBProductions How much does a canoe like this cost?
@AjBProductions2 ай бұрын
@@SANSANICH747The plans from Bear Mountain Boats are around $100. The wood, fibreglass, resin and other materials cost me around $800 Canadian.
@donezze2 ай бұрын
Hello! My name is Ezequiel. I'm from Argentina! I wanna make that boat with my uncle. How can you help us to get all the boat plans? Thanks for all.
@AjBProductions2 ай бұрын
Hello Ezequiel! You can get the boat plans from Bear Mountain Boats. They have this model as well as many others to choose from. Link to the website is : www.bearmountainboats.ca/ Have fun building and using the canoe!
@donezze2 ай бұрын
GBY ❤
@rompikunsarayosabah85962 ай бұрын
Great anding.😢
@waterboy89992 ай бұрын
Stunning, thanks for posting. Best wishes from Scotland.
@AjBProductions2 ай бұрын
Thank you very much! Cheers from Canada.
@JenniferPChung2 ай бұрын
So beautiful! I love the watertight pocket near the nose. And that curves🥰👌
@AjBProductions2 ай бұрын
Thank you so much 🤗
@majidshubar4803 ай бұрын
perfect man ❤
@janthony79613 ай бұрын
Hey what type of plywood are you using for the floor?
@AjBProductions3 ай бұрын
I used 5/8” treated plywood both under and over a 2x4 (on flat) frame. All was glued using PL400 subfloor adhesive.
@carollangevin31753 ай бұрын
merveilleux
@tomato8ish3 ай бұрын
This is literally the perfect mobile sauna! Regarding the drain, does is the floor slightly sloped towards it and does it drain to the exterior of the sauna? If so, how?
@AjBProductions3 ай бұрын
Thank you. I am definitely enjoying its mobility and function. The floor drain is located close the the stove’s door and also acts as fresh air intake for combustion. The floor is sloped into it from approximately 3’ in all directions mainly to drain any spillage when pouring water on the stove. You can see it’s location in the floor frame and slope at 2:08 and again at 14:05 in the video. Water drains onto the deck of the trailer. Thanks for you response. Cheers
@brandonharlow54683 ай бұрын
Absolutely beautiful work!
@AjBProductions3 ай бұрын
Thank you very much!
@davidBarrel3 ай бұрын
!!! is that epoxy or poyester resin?
@AjBProductions3 ай бұрын
It is epoxy resin.
@nicklombard88263 ай бұрын
How much in total did this build cost? Looks amazing
@AjBProductions3 ай бұрын
Thank you. The total (excluding the trailer) was $8k Ca. I already had the cedar for the exterior so that is not included.
@Nikolars3 ай бұрын
Потрясающий мастер!!!
@armadillo12313 ай бұрын
I just suscribed. If more people did work like this, the world would not be such an aggressive place.
Пікірлер
Hello good sir, Where can I find the canvas you use to seal the cedar strips? An can I ask what kind of epoxy you use to cover the canvas?
That is called fibreglass cloth and can be purchased at your local boat building supply store. I used West System epoxy resin. Cheers.
beautiful canoe.
Very nice job, absolutely fantastic craftsmanship. Surprised I didn’t see you fit an insulation though, why not out of interest?
Thank you! If I recall, the insulation part was just not that interesting and I needed to wear a mask so decided to skip recording it. I used Rockwool insulation and had to split it in half to fit in the 2x2” wall studs. On the roof, I was able to fit the full insulation sheet as the trusses are thicker. Cheers.
Great job I enjoyed watching a Master at work Thanks
Thank you very much. I’m glad you enjoyed it.
They don’t make them like this anymore. The dying Art of The Master Craftsman. Reminds me of my Grandfather.
Thank you for your kind words.
Such a lovely creation!
Thank you! Cheers!
i want one, please…. BRAVO❗️
Acabamos de adquirir uma lt 50 , estou bastante otimista com a máquina.
Congratulations! They are amazing!
Priceless.
Excellent! That’s how you do it.
WOW. And it even floats, too. 😊 An absolute work of art.
😂 Yes it does! How about that. Thank you, Cheers.
A fixture for an entire canoe, that is ingenious indeed.
Thank you very much!
What time frame did it take to build that, from start to finish?
It took around 150 hours to build. Cheers.
Beautiful work Sir
What a magnificant boat. Wow! Way too nice for the abuse I give my canoes. On another note, I think I found your Stellar Jays and Magpies. They've moved to my house in Coeur d'Alene for the summer.
Thank you very much! Good to know the birds now have a good home. 😀 Cheers from Edson, Alberta.
An absolute delight to watch a real craftsman forging his art. What a beautiful canoe!!
Thank you very much for your kind words.
That's the most beautiful canoe I've ever laid eyes on! Thank you!
Thank you very much! Glad you like it.
Masterful.
wow
These turned out great Andre. Do you know any approximate total time to build? Have you taken them out yet? I am looking at building an Angus boat kit and was thinking I may do these as a follow up project. Thanks for the video!
Thank you. Total time was around 30 hours and well worth it. I also build the Angus Oxford Wherry and these oars really performed. Sadly I no longer have the boat and oars but it was a fun project.
Thank You for the beautifully edited video. I am a grandpa who's biggest inspirations are projects with grandchildren. If I could get, purchase or steal the rib drawings/files, it would make my day, month and the year?!?! Please, let me know if you could help?!
Thank you for your kind words. Unfortunately I don’t have the plans anymore but you can easily buy them from Bearmountainboats.com. The plans for the Bob’s Special are listed first on their website and cost just $105ca. Hope you have a wonderful time building this classic canoe with your grandkids. Cheers.
Very cute boat!😲👍
Thank you 🤗
Magnificent. And beautiful.
Thank you very much!
Amazing Job, You are very Clever
Thank you! Cheers!
Wow! You sir are a true craftsman. You did an amazing job and i enjoyed watching it transform into a work of art. Thank you
Thank you very much! I’m glad you enjoyed watching it. Cheers.
Congratulations on the wonderful work, simply a show. A work by a true artist! God blesses!
Thank you very much!
What Iwould like to know is would you sell one?
Thank you for your question however, I only built this one for personal use. I have seen hand made canoes for sale so hopefully you can find one. All the best to you.
amor pelo que faz
Beautiful boat skillfully made.
Thank you very much!
The visuals in your video are absolutely stunning
Thank you very much! I’m glad you enjoyed it.
Lovely
楽しかった!
Thank you. I’m happy you enjoyed it.
It was amazing to skip the birds and watch the canoe built. :)
Glad you enjoyed it!
Do you sell them?
Thanks for the question, but no. I built this for personal use.
Thanks for sharing. I admire the grace, beauty and functional aspects of your considerable crafting skills. Salute! Comment added for the algorithm.
Thank you very much for your compliment and the algorithm boost 😁.
Really superlative video editing, Andre. Which is the least of your accomplishment.
Thank you very much!!
Великолепная работа! Какие породы древесины были использованы для изготовления?
Thank you! The strips are Western Red Cedar and the front and rear keels are Ash.
@@AjBProductions How much does a canoe like this cost?
@@SANSANICH747The plans from Bear Mountain Boats are around $100. The wood, fibreglass, resin and other materials cost me around $800 Canadian.
Hello! My name is Ezequiel. I'm from Argentina! I wanna make that boat with my uncle. How can you help us to get all the boat plans? Thanks for all.
Hello Ezequiel! You can get the boat plans from Bear Mountain Boats. They have this model as well as many others to choose from. Link to the website is : www.bearmountainboats.ca/ Have fun building and using the canoe!
GBY ❤
Great anding.😢
Stunning, thanks for posting. Best wishes from Scotland.
Thank you very much! Cheers from Canada.
So beautiful! I love the watertight pocket near the nose. And that curves🥰👌
Thank you so much 🤗
perfect man ❤
Hey what type of plywood are you using for the floor?
I used 5/8” treated plywood both under and over a 2x4 (on flat) frame. All was glued using PL400 subfloor adhesive.
merveilleux
This is literally the perfect mobile sauna! Regarding the drain, does is the floor slightly sloped towards it and does it drain to the exterior of the sauna? If so, how?
Thank you. I am definitely enjoying its mobility and function. The floor drain is located close the the stove’s door and also acts as fresh air intake for combustion. The floor is sloped into it from approximately 3’ in all directions mainly to drain any spillage when pouring water on the stove. You can see it’s location in the floor frame and slope at 2:08 and again at 14:05 in the video. Water drains onto the deck of the trailer. Thanks for you response. Cheers
Absolutely beautiful work!
Thank you very much!
!!! is that epoxy or poyester resin?
It is epoxy resin.
How much in total did this build cost? Looks amazing
Thank you. The total (excluding the trailer) was $8k Ca. I already had the cedar for the exterior so that is not included.
Потрясающий мастер!!!
I just suscribed. If more people did work like this, the world would not be such an aggressive place.
Thank you very much and I totally agree.
Extraordinario trabajo!