Awesome upgrade! Will this fit a 2008 yamaha zuma yw50?
@dustinburgos9967Күн бұрын
You've got to change the rollers now and make them lighter I believe
@user-fr2qm7yy2d3 күн бұрын
Cool guy appreciate your videos
@user-li3mk6wu9f3 күн бұрын
What means gy6?
@iman-kr3dible8423 күн бұрын
Hey man been watching throttle therapy. And decided “well hell” now I bought a dongfang super 200
@danjim70563 күн бұрын
Got a xpro 50 with 12" wheels and it does 40mph out of box sitting straight (accordikg to gps) im 175lbs. I'm not sure if it's just because of the bigger wheels or what. Seems most of these china scooters dont hit 40mph without some bassic mofs.
@khristopherobyn4 күн бұрын
Is there any way I can send you a model number and serial number to tell me what type of carburetor kid that I can get like.The one in the video for my scooter
@gingerlaughs7226 күн бұрын
How did you mount the steering?
@evildeed90s9 күн бұрын
no protective gear or no helmet these things aint toys your going to do your selves some serious damage. heres a bit of an example ive come off my bike only doing 30mph before dont seem that fast but the road still ate through my jacket like a hot knife through butter now imagine the damage i would have had if i just had a tshirt and shorts on it would of been no skin left.
@jamesmac43359 күн бұрын
Terrible video!!
@smajhound404811 күн бұрын
Where does this take place I’m intrigued. What’s the newest vintage you can ride?
@Mcguyver12 күн бұрын
This is a scam. The carb u said you put in isn't even in the the scooter
@majjegaming592712 күн бұрын
My dad has a lance pch50 that I started tearing into sat for 2 years was filled w. Water
@DaveEisler-t1u13 күн бұрын
I’m confused, which carb is the one that made it faster and without needing anything else, thx.
@isneak66110 күн бұрын
One with bigger Jets I assume letting more fuel in
@KingCal13 күн бұрын
if your not hearing your tappets reaching their top speed then you dont need the gear up kit its made for those that reach the highest rpms cause it lowers the final drives rpm so say if im doing 40 at 10k it would be 8k at 55 with the highest gear up but if you add upgrades that help it reach its top rpms constantly real snappy it will work great i tune for perfection
@thebluesrockers15 күн бұрын
Someone worked on my brother's Yamaha Razz a few years ago. It took forever to get that thing up to 30 mph. but it topped out at 50 mph. That Razz felt like a death trap. I think you could probably change the gear ratio with some new sprockets. But then you'll either be slow getting up to speed, or fast getting up to speed with no top end to speak of. Not sure what the best gear ratio would be, but that carb. really boosted the one in this video.
@Lilogmffamily18715 күн бұрын
Now I have a venom 18x trying to get it going fast
@surajdatta408716 күн бұрын
Does this make the scooter unreliable?
@morgandraegar730116 күн бұрын
Any recommendations for a Vitacci Clash 200 EFI? Hoping for the best, have heard some recommended modifications and found one in decent condition. Thank you guys for the vids!
@user-jo6nt7jz5e16 күн бұрын
That one sled on the ditch banger track needs headlight fixed.
@BethShearer-wx1oc17 күн бұрын
You guys need to start showing people how to put this stuff on
@rubenhoekstra463717 күн бұрын
I also have a 50cc gy6 and i had 7 gram rollers in it and deleted the vario ring. Stock cdi only cvt Mods. It ran around 70kmh which i think is around 40-50 mph. 4 gram rollers are way to light so try using 6.5-7 gram
@Lilogmffamily18717 күн бұрын
Win I was 230pond my tao tao 50 wood do 50mpr shuffle my beat Zuma's 50cc all day it was fast even broke speedometer it was stock brand new butt now i got a venom 18x my favorite looks good and i goingto make it fast
@jarin12ga18 күн бұрын
The classic sleeper!!
@jimtibbitts910319 күн бұрын
I bought a carburetor for my TaoTao from Amazon and mine is now almost 5 mph faster.
@murrymorrow8220 күн бұрын
Could you show to t in the brake line with only 1 caliper? I am guessing 1 is a return? Help me understand the setup.
@87mustang8720 күн бұрын
My 50 cc with full exhaust and carb does 40 lol😂
@BillEddie20 күн бұрын
Can you do a valve timing video please?
@YungBlaxTv21 күн бұрын
I’m definitely tuning my scooter and that’s what’s up he brought your filter back as well we both from the same place but im in Vegas now but keep up the videos I been watching a lot of em tonight
@pburgvenom22 күн бұрын
Having built a bunch of No-Peds back in the day, I have to say this brings up memories. MILL THE HEAD⭐️It you want “EASY HP” but will need to run premium or race gas (or octane booster). 180 psi can run most pump gas, but I built one with about 200psi and it was REALLY fast but requires race type octane numbers and a “colder sparkplug)CARB⭐️ FIND AN aftermarket race carb for an 80cc and always get your carb tuning correct and check often, learn how to read plugs and watch for high speed leanout. PIPE⭐️ when I look at that pipe it just seems wrong, I would probably get an RM/YZ/CR 80/65 race pipe and cut it up to build a custom pipe for your 70, (yeah it will be a bit flat out of the hole but once it gets on the pipe.. lookout!) PORTING⭐️ at the very least learn about porting and do a mild port/polish)🎉 ⭐️lighten up everything that spins, get a looser clutch, play with gear ratios if possible. But most important, HAVE FUN
@KingKyran55523 күн бұрын
Rev limiter
@garplin25 күн бұрын
shows nothing what you guys did!!
@bevis22625 күн бұрын
Put 1 size larger pilot jet in it or you'll blow the packing out of your muffler. It looks cool blowing big ole fireballs out of the muffler on deceleration but you'll quickly burn out the fiberglass packing. Fireball means it's running a bit lean.
@nazarus_sapigao26 күн бұрын
One handed at 80 was wild
@monkeman56726 күн бұрын
Im planning on doing a 80cc big Bore kit on My 50cc 4 stroke 139qmb scooter and i was wondering If you knew what size threads The Jets have?
@lasseanti608427 күн бұрын
That thing is overrevving like crazy. Maintain the clutch and calibrate it.
@allan2502Ай бұрын
What size tires did you put on?im.planning on doimg.this with mines.thank you
@sethaustin5086Ай бұрын
You skipped over the size of the nut that you stood on. All you said was an impact. It looks huge!
@sethaustin508626 күн бұрын
It’s a 38 or 39
@MuslimAreUs1Ай бұрын
How much km/h it goes after upgrading?
@pr0v3r1Ай бұрын
how are these Chinese scooters so trash in America my Chinese scooter goes 45+mph stock and it isn't even the most expensive Chinese scooter it was 1250$
@davidlongM54E46Ай бұрын
Bro!!!!!!!! Not the 50ccc 😢
@gray7080Ай бұрын
My stock 50 runs at 50mph so it seems mine should go pretty wuick
@motorizedbicyclenation53cu90Ай бұрын
Mikuni carb
@lennydetloff1031Ай бұрын
Does anyone know what weight rollers are in the stock 2022 tao tao pony 50 moped?
@lennydetloff1031Ай бұрын
Dang, I guess I should be happy going 40 - 45 on my stock tao tao pony 50 but I'm waiting for the new sliders to arrive!!
@freerunning9zАй бұрын
Why does my GY6 ruckus require so much throttle before it finally starts to move? What do I need to change to fix that?
@casiecombrinck2164Ай бұрын
and the rear brakes is weak
@casiecombrinck2164Ай бұрын
Hi my big Boy rivival scooter takes 10 seconds to pick up speed
@jonashhhhhhhh5352Ай бұрын
how big is your carburator?
@KikeMena-xj8vuАй бұрын
Can you help me? I have a 2021 Wolf Rugby model moped, 49cc motorcycle and it reaches a maximum of 30 miles per hour. Can you help me and tell me it would be ideal to buy it so that it has more speed?
Пікірлер
Awesome upgrade! Will this fit a 2008 yamaha zuma yw50?
You've got to change the rollers now and make them lighter I believe
Cool guy appreciate your videos
What means gy6?
Hey man been watching throttle therapy. And decided “well hell” now I bought a dongfang super 200
Got a xpro 50 with 12" wheels and it does 40mph out of box sitting straight (accordikg to gps) im 175lbs. I'm not sure if it's just because of the bigger wheels or what. Seems most of these china scooters dont hit 40mph without some bassic mofs.
Is there any way I can send you a model number and serial number to tell me what type of carburetor kid that I can get like.The one in the video for my scooter
How did you mount the steering?
no protective gear or no helmet these things aint toys your going to do your selves some serious damage. heres a bit of an example ive come off my bike only doing 30mph before dont seem that fast but the road still ate through my jacket like a hot knife through butter now imagine the damage i would have had if i just had a tshirt and shorts on it would of been no skin left.
Terrible video!!
Where does this take place I’m intrigued. What’s the newest vintage you can ride?
This is a scam. The carb u said you put in isn't even in the the scooter
My dad has a lance pch50 that I started tearing into sat for 2 years was filled w. Water
I’m confused, which carb is the one that made it faster and without needing anything else, thx.
One with bigger Jets I assume letting more fuel in
if your not hearing your tappets reaching their top speed then you dont need the gear up kit its made for those that reach the highest rpms cause it lowers the final drives rpm so say if im doing 40 at 10k it would be 8k at 55 with the highest gear up but if you add upgrades that help it reach its top rpms constantly real snappy it will work great i tune for perfection
Someone worked on my brother's Yamaha Razz a few years ago. It took forever to get that thing up to 30 mph. but it topped out at 50 mph. That Razz felt like a death trap. I think you could probably change the gear ratio with some new sprockets. But then you'll either be slow getting up to speed, or fast getting up to speed with no top end to speak of. Not sure what the best gear ratio would be, but that carb. really boosted the one in this video.
Now I have a venom 18x trying to get it going fast
Does this make the scooter unreliable?
Any recommendations for a Vitacci Clash 200 EFI? Hoping for the best, have heard some recommended modifications and found one in decent condition. Thank you guys for the vids!
That one sled on the ditch banger track needs headlight fixed.
You guys need to start showing people how to put this stuff on
I also have a 50cc gy6 and i had 7 gram rollers in it and deleted the vario ring. Stock cdi only cvt Mods. It ran around 70kmh which i think is around 40-50 mph. 4 gram rollers are way to light so try using 6.5-7 gram
Win I was 230pond my tao tao 50 wood do 50mpr shuffle my beat Zuma's 50cc all day it was fast even broke speedometer it was stock brand new butt now i got a venom 18x my favorite looks good and i goingto make it fast
The classic sleeper!!
I bought a carburetor for my TaoTao from Amazon and mine is now almost 5 mph faster.
Could you show to t in the brake line with only 1 caliper? I am guessing 1 is a return? Help me understand the setup.
My 50 cc with full exhaust and carb does 40 lol😂
Can you do a valve timing video please?
I’m definitely tuning my scooter and that’s what’s up he brought your filter back as well we both from the same place but im in Vegas now but keep up the videos I been watching a lot of em tonight
Having built a bunch of No-Peds back in the day, I have to say this brings up memories. MILL THE HEAD⭐️It you want “EASY HP” but will need to run premium or race gas (or octane booster). 180 psi can run most pump gas, but I built one with about 200psi and it was REALLY fast but requires race type octane numbers and a “colder sparkplug)CARB⭐️ FIND AN aftermarket race carb for an 80cc and always get your carb tuning correct and check often, learn how to read plugs and watch for high speed leanout. PIPE⭐️ when I look at that pipe it just seems wrong, I would probably get an RM/YZ/CR 80/65 race pipe and cut it up to build a custom pipe for your 70, (yeah it will be a bit flat out of the hole but once it gets on the pipe.. lookout!) PORTING⭐️ at the very least learn about porting and do a mild port/polish)🎉 ⭐️lighten up everything that spins, get a looser clutch, play with gear ratios if possible. But most important, HAVE FUN
Rev limiter
shows nothing what you guys did!!
Put 1 size larger pilot jet in it or you'll blow the packing out of your muffler. It looks cool blowing big ole fireballs out of the muffler on deceleration but you'll quickly burn out the fiberglass packing. Fireball means it's running a bit lean.
One handed at 80 was wild
Im planning on doing a 80cc big Bore kit on My 50cc 4 stroke 139qmb scooter and i was wondering If you knew what size threads The Jets have?
That thing is overrevving like crazy. Maintain the clutch and calibrate it.
What size tires did you put on?im.planning on doimg.this with mines.thank you
You skipped over the size of the nut that you stood on. All you said was an impact. It looks huge!
It’s a 38 or 39
How much km/h it goes after upgrading?
how are these Chinese scooters so trash in America my Chinese scooter goes 45+mph stock and it isn't even the most expensive Chinese scooter it was 1250$
Bro!!!!!!!! Not the 50ccc 😢
My stock 50 runs at 50mph so it seems mine should go pretty wuick
Mikuni carb
Does anyone know what weight rollers are in the stock 2022 tao tao pony 50 moped?
Dang, I guess I should be happy going 40 - 45 on my stock tao tao pony 50 but I'm waiting for the new sliders to arrive!!
Why does my GY6 ruckus require so much throttle before it finally starts to move? What do I need to change to fix that?
and the rear brakes is weak
Hi my big Boy rivival scooter takes 10 seconds to pick up speed
how big is your carburator?
Can you help me? I have a 2021 Wolf Rugby model moped, 49cc motorcycle and it reaches a maximum of 30 miles per hour. Can you help me and tell me it would be ideal to buy it so that it has more speed?