i use screwed together 4 and 6 10 inch pieces 2x8 lumber with a strap and just hang it across the foot of the splitter . but feel free to over engineer and ugly up your splitter ....
@DavidS-dj7sn5 ай бұрын
Great job
@jmreg73916 ай бұрын
Limiter looks great
@danthomas71806 ай бұрын
Till the seal goes bad n your sausage is ruined with the water. Build it the same way but use air.
@chuckvoss93447 ай бұрын
Very useful information. Tks.
@chuckvoss93447 ай бұрын
Very good stroke limiter idea. tks.
@4486xxdawson7 ай бұрын
Wow what amazing original condition , Talk about a diamond in the ruff wow ...id have a hard time painting it , id probably reseal the windows and seams and just clear coat it and refinish the inside , just to show its not been touched since new ....what ever you paid , it shur wasnt a waist of money ,,,,your wife is one lucky lady ....
@holecaver8 ай бұрын
Genius!
@joelfoster35768 ай бұрын
YES a vid on How you did the RACK would be fantastic . It looks to be VERY STURDY ..Thanks this is a very good video ..
@robertsimonofsky39597 ай бұрын
Please do a video on how to add a rack…..I have a champion 27 ton and not seen anything on market….
@danthedewman19 ай бұрын
ive protected my engine side but plan on protecting the hydraulic side too...already have a dentin the hyd filter........
@frankcoyle41359 ай бұрын
Nice mod on the stroke limiter
@jonuvark238511 ай бұрын
My Aunt had this red and white camper. So many great memories beach camping in this perfect trailer with my sisters, cousin, Aunt Rosie, and my Mother.❤
@vy10mac911 ай бұрын
I've split 5 cords through it so far. Does what I need it to. kzread.infoUgkxUyQswtttSffRMblGbrhCvZn7JkhtG1-7 I scrounge all my firewood and am not equipped to handle big wood, but for logs up to 24 inch diameter or so, it works great. I've been amazed by some of the gnarly bur oak and elm crotches it has split. For the tougher stuff within it's size range, you might have to study the piece a bit to decide the best attack, but if you split smart it's up to the job. It did arrive low on oil, and I was would have nicked it half a star for that, but it has regained my full confidence. UPDATE NOVEMBER 2021: Still going strong after all these years. I love the one-handed operation. Hope it's still in production if I ever need to replace it
@larryhullinger4141 Жыл бұрын
What you thought was a sink drain was city water supply You hook up a hose so you don't have to depend on your holding tank
@YahshuaLovesMe Жыл бұрын
the whole thing needs to be redone.
@YahshuaLovesMe Жыл бұрын
great score!
@delorisfrench Жыл бұрын
Happy wife,happy life!!
@kerrycollins6935 Жыл бұрын
We have that identical camper. Just finished restoring. I'm trying to find out what size the original tires were. Are they 14" or 15"?
@tpctrash Жыл бұрын
Did you ever make a video on the stroke limiter?
@championacres Жыл бұрын
kzread.info/dash/bejne/pWWX18Z6h9ytl9I.html
@johnarnold3696 Жыл бұрын
I bought a new bushhog and it had remivable stroke limiters on the chrome rod to limit the stroke. They were clamp on collars about 2" thick. Tractor supply sells them
@jeffreybeckley3962 Жыл бұрын
Hi! I don't suppose you are renting this out by any chance?
@patmcbride9853 Жыл бұрын
I really like the stroke limiter idea.
@teshuvahemmet3036 Жыл бұрын
Nice 👍
@JCTyler64 Жыл бұрын
Thanks Jonas, this is so helpful....I'm going to put one on my splitter.
@fultonfirewoodcompany Жыл бұрын
You need The Bolt-on Bundler! kzread.info/dash/bejne/kYlrm7OtctybeZs.html
@evansandler9590 Жыл бұрын
do you have pattern or print out available? I need to build these for my daughters dance studio that is doing lion king
@championacres Жыл бұрын
Sorry, no pattern. Just measure up your small person and figure out what would look good on them. You don't have to go very tall to create an impressive look.
@johnr5545 Жыл бұрын
Nice job god bless
@mikedebear Жыл бұрын
Slick design! Thank you for sharing your idea.
@eBikeDad Жыл бұрын
This is the simplest display of creating one of these I've seen. How's it working out?
@siskiyouwoodsmann4279 Жыл бұрын
Really like all your mods, most of which I’ve already done to my splitter except for the stroke limiter….nice simple execution 👍
@peteantos-ketcham3493 Жыл бұрын
Which model splitter is this? 40 ton? Any issues or complaints with the County Line splitter?
@jordicampuzanocampos2757 Жыл бұрын
Wrjight, I do that !!!
@BangBang-hk4rg Жыл бұрын
Thanks so much for this info! Having one of these on my splitter will definitely save time (and gas) when I’ve got a big pile I’m working through
@BangBang-hk4rg Жыл бұрын
That stroke limiter is a stroke of genius! 🤣👍
@davidmaxwell7275 Жыл бұрын
Great idea Thanks for sharing, another job for the list
@PapaRug.582 жыл бұрын
Wise to cover engine with all the plastic parts now a days lol I made mine solid and hinges up to access fuel tank it keeps debris from smouldering on hot muffler
@lazarotrujillo12942 жыл бұрын
Quiro saver como ajustar la valvula para que travaje mas Rapido
@kenweis79132 жыл бұрын
Very few people know how to use a hydraulic on wedge splitter.... So many people carve a piece at a time when in actuality many shallow splits will tare the grain especially if there is a good center protrusion on the base
@arthurscott44672 жыл бұрын
I am glad you have plenty of money ,because that trailer is going to cost you a fortune to refurbish .you should also consider putting a portable toilet some where in it . I do not want to discouraged you but just by looking at your video you are probably going to have to gut the entire inside ,because water damage is quite visible. I wish you the very best ,stick with it and do not get discouraged because when you are done you will have a beautiful show piece.
@BounceBackWesterner11 ай бұрын
No, just because there is some water damage visible does not mean that you will automatically gut a trailer. This is a very bad idea in all cases. This should never ever be done. You pull the skins off first and then see where the damage is and how bad it is and replace pieces as needed. We see videos on youtube with people gutting their trailers. It's just plain wrong. Just because you see people doing it, doesn't make it a good idea.
@timwhite44322 жыл бұрын
A simpler limiter would be to drill a few holes in the bed and drop a bolt in behind the ram head. Easy adjustment by moving the bolt. Just had that idea, hope it helps.
@terrysmith87142 жыл бұрын
Jack pot trailor. Wish I had one in that condition. Chees to you Sir.
@stanleykeith69692 жыл бұрын
I would like to see how you made the log rack.
@forestnfren81462 жыл бұрын
dude. that limiter is 900 IQ. love it
@merrilljohn1619 Жыл бұрын
more like 1200 IQ !
@tonymunoz83682 жыл бұрын
Love to see a video on the log splitter rack with engine guard.
@tomn68632 жыл бұрын
Great mods!
@JCWren2 жыл бұрын
A chunk of Delrin would make nice brackets for the slide. If I don't have any around, I think I may try 3D printing them in PETG. I might include a slight indent across the top for the hose clamp to sit in. Not really necessary, but would reduce any potential for the band walking off.
@championacres2 жыл бұрын
3d printed guide blocks would work great. I've been working on a cnc plasma table build and I'm using a lot of 3d printed brackets. With the right design its plenty strong.
@Phand23592 жыл бұрын
Brilliant idea that I just copied , works perfect. Thanks Jonas
Пікірлер
Very cool! What an experience.
Awesome shots .... what a blast
Way too complicated.
i use screwed together 4 and 6 10 inch pieces 2x8 lumber with a strap and just hang it across the foot of the splitter . but feel free to over engineer and ugly up your splitter ....
Great job
Limiter looks great
Till the seal goes bad n your sausage is ruined with the water. Build it the same way but use air.
Very useful information. Tks.
Very good stroke limiter idea. tks.
Wow what amazing original condition , Talk about a diamond in the ruff wow ...id have a hard time painting it , id probably reseal the windows and seams and just clear coat it and refinish the inside , just to show its not been touched since new ....what ever you paid , it shur wasnt a waist of money ,,,,your wife is one lucky lady ....
Genius!
YES a vid on How you did the RACK would be fantastic . It looks to be VERY STURDY ..Thanks this is a very good video ..
Please do a video on how to add a rack…..I have a champion 27 ton and not seen anything on market….
ive protected my engine side but plan on protecting the hydraulic side too...already have a dentin the hyd filter........
Nice mod on the stroke limiter
My Aunt had this red and white camper. So many great memories beach camping in this perfect trailer with my sisters, cousin, Aunt Rosie, and my Mother.❤
I've split 5 cords through it so far. Does what I need it to. kzread.infoUgkxUyQswtttSffRMblGbrhCvZn7JkhtG1-7 I scrounge all my firewood and am not equipped to handle big wood, but for logs up to 24 inch diameter or so, it works great. I've been amazed by some of the gnarly bur oak and elm crotches it has split. For the tougher stuff within it's size range, you might have to study the piece a bit to decide the best attack, but if you split smart it's up to the job. It did arrive low on oil, and I was would have nicked it half a star for that, but it has regained my full confidence. UPDATE NOVEMBER 2021: Still going strong after all these years. I love the one-handed operation. Hope it's still in production if I ever need to replace it
What you thought was a sink drain was city water supply You hook up a hose so you don't have to depend on your holding tank
the whole thing needs to be redone.
great score!
Happy wife,happy life!!
We have that identical camper. Just finished restoring. I'm trying to find out what size the original tires were. Are they 14" or 15"?
Did you ever make a video on the stroke limiter?
kzread.info/dash/bejne/pWWX18Z6h9ytl9I.html
I bought a new bushhog and it had remivable stroke limiters on the chrome rod to limit the stroke. They were clamp on collars about 2" thick. Tractor supply sells them
Hi! I don't suppose you are renting this out by any chance?
I really like the stroke limiter idea.
Nice 👍
Thanks Jonas, this is so helpful....I'm going to put one on my splitter.
You need The Bolt-on Bundler! kzread.info/dash/bejne/kYlrm7OtctybeZs.html
do you have pattern or print out available? I need to build these for my daughters dance studio that is doing lion king
Sorry, no pattern. Just measure up your small person and figure out what would look good on them. You don't have to go very tall to create an impressive look.
Nice job god bless
Slick design! Thank you for sharing your idea.
This is the simplest display of creating one of these I've seen. How's it working out?
Really like all your mods, most of which I’ve already done to my splitter except for the stroke limiter….nice simple execution 👍
Which model splitter is this? 40 ton? Any issues or complaints with the County Line splitter?
Wrjight, I do that !!!
Thanks so much for this info! Having one of these on my splitter will definitely save time (and gas) when I’ve got a big pile I’m working through
That stroke limiter is a stroke of genius! 🤣👍
Great idea Thanks for sharing, another job for the list
Wise to cover engine with all the plastic parts now a days lol I made mine solid and hinges up to access fuel tank it keeps debris from smouldering on hot muffler
Quiro saver como ajustar la valvula para que travaje mas Rapido
Very few people know how to use a hydraulic on wedge splitter.... So many people carve a piece at a time when in actuality many shallow splits will tare the grain especially if there is a good center protrusion on the base
I am glad you have plenty of money ,because that trailer is going to cost you a fortune to refurbish .you should also consider putting a portable toilet some where in it . I do not want to discouraged you but just by looking at your video you are probably going to have to gut the entire inside ,because water damage is quite visible. I wish you the very best ,stick with it and do not get discouraged because when you are done you will have a beautiful show piece.
No, just because there is some water damage visible does not mean that you will automatically gut a trailer. This is a very bad idea in all cases. This should never ever be done. You pull the skins off first and then see where the damage is and how bad it is and replace pieces as needed. We see videos on youtube with people gutting their trailers. It's just plain wrong. Just because you see people doing it, doesn't make it a good idea.
A simpler limiter would be to drill a few holes in the bed and drop a bolt in behind the ram head. Easy adjustment by moving the bolt. Just had that idea, hope it helps.
Jack pot trailor. Wish I had one in that condition. Chees to you Sir.
I would like to see how you made the log rack.
dude. that limiter is 900 IQ. love it
more like 1200 IQ !
Love to see a video on the log splitter rack with engine guard.
Great mods!
A chunk of Delrin would make nice brackets for the slide. If I don't have any around, I think I may try 3D printing them in PETG. I might include a slight indent across the top for the hose clamp to sit in. Not really necessary, but would reduce any potential for the band walking off.
3d printed guide blocks would work great. I've been working on a cnc plasma table build and I'm using a lot of 3d printed brackets. With the right design its plenty strong.
Brilliant idea that I just copied , works perfect. Thanks Jonas