Пікірлер

• 
  @CharliePisani9 күн бұрын

  Can anyone help with the problem of the tent won't lock in straight to keep it level.

• 
  @JC_explores_17 күн бұрын

  How is it going over time

• 
  @DubstepMonkey4223 күн бұрын

  Personally not a fan of the brand truck but have to admit it looks and acts like a beast! Epic work mate. Looking forward to seeing any new updates

• 
  @AdiAsafАй бұрын

  Hey great channel ! Dumb question here..much like you I dont want to have any 'perm fixtures' in my XLT tub and need to use a tub rack to place an rtt. The thing is, given the space required for a fridge and sliding drawer it does not leave much space especially the way the shutter roller is installed. Would you remove the shutter roller and store more stuff in the space between the fridge top, the drawer and the tub rack top? Just wondering how to secure equipment stored there

• 
  @BrandonFisher-vr2xxАй бұрын

  Did the rear lights work with upgraded taillights?

• 
  @alexanderr.7910Ай бұрын

  The brackets in the front are for the lightbar installation.

• 
  @markanthonyy292 ай бұрын

  Hi mate great video, you helped me get my own tub rack and rtt set up today. Where did you get that maxtrax holder on the side of your tub rack from? Looks really handy. Cheers!

• 
  @mikeperth80272 ай бұрын

  Why did you buy a four door instead of a ute?

• 
  @tbone_2k2173 ай бұрын

  What’s is everyone doing for the exposed tub? Do u need install a roller shutter ?

• 
  @lord7th2072 ай бұрын

  I’m planning on leaving mine exposed or cutting my cover to fit the rack

• 
  @piercekingi63203 ай бұрын

  10:21 sounded like you jizzed in your pants😂 just bought me one for my everest and hope I have the same expression on P3.1 😂

• 
  @timdissanayake15024 ай бұрын

  Awesome stuff

• 
  @btfofffice5 ай бұрын

  I am looking at options for a trailer and looking at installing adjustable height legs or a design that can allow the tent to free-stand. thought of getting some modular storage racks that can act as stands when required, thus giving me more layout options and freeing up the car.

• 
  @jpatane175 ай бұрын

  Do you have a video fir install of bespoke supports?

• 
  @stuartlock22555 ай бұрын

  What is its weight capacity?

• 
  @btfofffice5 ай бұрын

  Missing are the options to bolt the tent to the roof rack? Could you design it so that you could set up the tent as a stand-alone if you wanted to leave the tent standing when you want to use the car and retain your camping spot? I am thinking of using it with a trailer but in the meantime use the roof rack

• 
  @1WinchesterSt5 ай бұрын

  Great video mate just what I was looking for! Cheers.

• 
  @baywarra6 ай бұрын

  Awesome 🍺

• 
  @Huda887546 ай бұрын

  Hey mate how tall are the silver mounting brackets under the tent?

• 
  @Tristanthechich6 ай бұрын

  Hey mate, quick question, did you have to make your own hole or did you use an existing hole feeding the wire from the tub to under the chassis? Could you give more detail and a run down of how you got it through the tub liner/tub itself?

• 
  @Shenanigans4x46 ай бұрын

  Hey mate, there are existing holes at the top of the inner tub skin I tried to show as best as I could in the vid, but if you remove the splash guard and stick you hand right up there you should be able to find them Once the wiring is through, I was able to pull back the tub liner slightly and pull it over the top Cheers for watching 👍

• 
  @desertadventures42216 ай бұрын

  Thank you for shared

• 
  @Shenanigans4x46 ай бұрын

  Cheers for watching mate 👍

• 
  @johnnybeacon44037 ай бұрын

  Good work bud.

• 
  @Shenanigans4x47 ай бұрын

  Cheers mate 👍

• 
  @user-sp4gy7ko5l7 ай бұрын

  Spare tyres should be in the tub if possible. Keep that weight down low brother.

• 
  @Shenanigans4x47 ай бұрын

  I agree mate, unfortunately my towbar doesn't allow the 33" tyre to fit under the tub and I need all the room I can get inside the tub Cheers for watching 👍

• 
  @BTaai8 ай бұрын

  Thanks mate this is exactly what i was looking for.. Perfect 👌

• 
  @Shenanigans4x47 ай бұрын

  Glad I could help mate 👍

• 
  @gabrielfranco61128 ай бұрын

  Nice job ,thanks for the tutorial,I got some great ideas from ya.😊 Cheers

• 
  @Shenanigans4x47 ай бұрын

  No worries mate 👍 Cheers for watching

• 
  @annetteruzicka15078 ай бұрын

  G'day, we have the same tub rack & tent, but the the rack cross bars can't seem to line up for the width of the tent's bars. They are adjustable but we can't seem to get the 800mm width without it being way off centre. Any advice?

• 
  @Shenanigans4x48 ай бұрын

  G'day Annette, I had the same problem with mine but moved the top bars where they needed to be 800mm apart and drilled new holes. Apply some etch primer undercoat with a cotton bud to prevent rust and you're good to go 👍

• 
  @kevinwaters-marsh2178 ай бұрын

  Nicely done Champ. Very impressive. Great work, you should be proud of what you built. Just like you, need my ute tub for work but also needed for camping on weekends... Thank you for the inspiration. I've got the same XTM drawers and XTM slide out kitchen and need same solution. Subscribed.

• 
  @Shenanigans4x48 ай бұрын

  Cheers mate! It's all about what works for you Would love to see some pics when your done with yours 👍

• 
  @donnajohnson93248 ай бұрын

  Get day from Mildura just found your channel 😊 will keep going and see what you say about the kings roof top tent ⛺️

• 
  @Shenanigans4x48 ай бұрын

  Cheers for watching 👍

• 
  @QuiDocetDiscit8 ай бұрын

  Thanks for the vid...that's the exact setup I'm doing but on a trailer. Yours looks great! Hope it brings a lot of fun.🙂👍

• 
  @Shenanigans4x48 ай бұрын

  Cheers mate! Now just have to be a le to get away more often 👍

• 
  @goldyandrobbo65408 ай бұрын

  Mate you nailed that! Very neat good job. We have subscribed

• 
  @Shenanigans4x48 ай бұрын

  Cheers guys! Maybe I'll see you out on the tracks 👍

• 
  @bradleydeaves76429 ай бұрын

  Aye that’s my old Engine 😂

• 
  @Shenanigans4x49 ай бұрын

  Haha cheers mate 👍 She'll be built one day 🤣

• 
  @federicoontheroad9 ай бұрын

  Bravo! Well done! 😉

• 
  @Shenanigans4x49 ай бұрын

  Cheers mate 👍

• 
  @JamesJeanneret9 ай бұрын

  Good vid. Perhaps different music choices would appeal to a wider audience…I almost turned it off because of it and I wouldn’t watch more content if that’s what you got in all of them.

• 
  @Shenanigans4x49 ай бұрын

  Cheers mate, still very much experimenting with what works 👍

• 
  @IndieBoy22879 ай бұрын

  Hey mate have you run the cables for the reverse lights? Can’t seem to find a clean way to run them into the tub

• 
  @Shenanigans4x49 ай бұрын

  Hey mate, check out my DIY Control Box vid I ran between the tub and cab, then inside the tub skin above the wheel arch There's holes at the top, I think I tried to show them in my Kickass Powerstation vid Cheers for watching 👍

• 
  @geraldternola78339 ай бұрын

  Thanks for this guide. I’m waiting for my order to arrived and be installed.

• 
  @Shenanigans4x49 ай бұрын

  No worries mate! Cheers for watching 👍

• 
  @adamannear9 ай бұрын

  Dude! Killed it.. very well done!

• 
  @adamannear9 ай бұрын

  and subscribed mate. Thinking of doing something similar but wasn't sure how to attach it the tub. Legend!

• 
  @Shenanigans4x49 ай бұрын

  Cheers mate! Glad you enjoyed it 😊

• 
  @lynx52139 ай бұрын

  What tub rack do you have? Whats the dimensions? I dont want to take my sports bar off so looking for a shorter rack

• 
  @Shenanigans4x49 ай бұрын

  Hey mate, I've got the OzRoo full height 3/4 length ra k to suit Ranger Wildtrak Check out the vid on my channel 👍

• 
  @andrey89739 ай бұрын

  Did you have to drill the bed in order to install the rack?

• 
  @Shenanigans4x49 ай бұрын

  Hey mate,not with the roller cover There's a rail system that you can bolt the rack to Check out the video on my channel 👍

• 
  @AronJDuran10 ай бұрын

  how is the wind noise mate?

• 
  @Shenanigans4x410 ай бұрын

  I haven't noticed any wind noise at all from the rack mate, the wind fairing must be doing its job 👍

• 
  @brucephilipson10 ай бұрын

  No corrugated tubing to protect the wiring harness, no heat shrink on connections and running the compressor straight from the AGM battery. Not to mention that the battery box is the wrong way around. There are anderson plugs on the end as well as the back. All in all a pretty average attempt at a very simple install.

• 
  @Shenanigans4x410 ай бұрын

  Not pretending to be a professional mate, used everything that came with the battery box I haven't measured amperage the compressor draws but haven't had any issues running it from the AGM

• 
  @brucephilipson10 ай бұрын

  @@Shenanigans4x4 until it drops a cell. 😂😂

• 
  @Anglesandacid10 ай бұрын

  What was the wind noise like (bare rack) before the tyre was put on top?

• 
  @Shenanigans4x410 ай бұрын

  I didn't notice any noise prior to and after putting the tyre up there, the wind fairing must be doing its job 👍

• 
  @DubstepMonkey4210 ай бұрын

  Seriously dig this control box. The link has expired unfortunately what's the diameters of the box if you don't mind?

• 
  @Shenanigans4x410 ай бұрын

  Hey mate, dimensions were 290 x 210 x 100mm Cheers for watching 👍

• 
  @DubstepMonkey4210 ай бұрын

  @Shenanigans4x4 thank you appreciate it ima try get the same and build along with you

• 
  @kman648210 ай бұрын

  Just fitted the tub rack and tent. Be the worst job I’ve ever had to do. Wasn’t happy with the 4 bolts that hold the rails on. Just not enough meat on them. Deleted the rails and used larger bolts direct through to the rack. Used 4 of the six tub rails on top so the whole tent sits flat on it. I also introduced some thin ply to the tent over hang to eliminate the crunch effect when entering it. Yet to try it all out.

• 
  @Shenanigans4x410 ай бұрын

  I know what you mean about the bolts mate, I modified the rack so the allen bolt heads lined up in the rails keeping it a bit more sturdy but haven't had any issues with the bolts into the floor of the tent

• 
  @rockbuffalo321410 ай бұрын

  Hey mate was just looking on ppd. Did you get the rack for wild trak 2015-2022. Also did you grab the full height (3/4 cab length) rack

• 
  @Shenanigans4x410 ай бұрын

  Yeah mate it's full height 3/4 length, I think when I got it the title was just with Wildtrak feet Pretty sure they're all the same though from PX1 to PX3

• 
  @rockbuffalo321410 ай бұрын

  @@Shenanigans4x4 wicked mate thanks heaps. Keep up the great work!

• 
  @ElfAzzid10 ай бұрын

  Had this for a few years. Pack up and set up required an extra ladder as I had it on top of a Delica. The tent was brilliant. Warm, waterproof, sturdy. Camped in heavy snow and it held up the weight. I packed it up wet a few times, and when set up again a few weeks later there was no mould or mildew and the water was still beading on the outside. Interior was always dry and never musty. I discovered the 6 man annex wasn't remotely water proof though. It was always an indoor swimming pool if it rained at all. I'd done a few road trips around NSW with the tent. Setting up and packing up every day got a little tiresome. Few years later it started developing a bit of wear and tear. Straps breaking, the floor began creaking and cracking, buckling. But for the cost of it, I got a lot of use out of it before it needed replacing. I upgraded to the Tourer X a few months ago. It doesnt feel as big on the inside as the original Tourer, but it's not a bad tent. Can't leave blankets and pillows inside like you can with the tourer though. Has to be emptied.

• 
  @Shenanigans4x410 ай бұрын

  Good to hear I'll get a bit of use out of the tent mate Note taken though, I'll try not to set up the annex in heavy weather 👍

• 
  @gillgitsham197611 ай бұрын

  Cheers mate good video..mine is the roos system special but identical to yours ...mine also came with drill shavings absolutely everywhere insids the tent and my ladder was the same but was supplied fat plastic washers to make up the gap but still didn't look good to begin with.. all ok now...but just seems put together but a 15 year old in a back shed ...

• 
  @Shenanigans4x410 ай бұрын

  Probably made in the same factory haha As long as it does the job at the end of the day 👍

• 
  @user-iu5ut7up9j11 ай бұрын

  Hi mate. Love your work! Thanks for the great videos. How's your roller shutter holding up since going off road with roof top tent and the tub rack? Also do you leave your tent on or take it off after every camping trip? Thanks man

• 
  @Shenanigans4x410 ай бұрын

  Cheers mate! Great to hear the vids are being enjoyed 👍 I leave the tent on all the time, too much hassle to remove The roller shutter is still working fine thanks to the supports from Bespoke Offroad Accessories

• 
  @user-iu5ut7up9j10 ай бұрын

  Awesome, thanks, man. You're a legend! Yeah, I went to see them. Such lovely owners. Slowly getting my set up done. Be good to see you out there one day. Thanks again for your videos

• 
  @DubstepMonkey4211 ай бұрын

  So tidy man great build. That control box turned out awesome!

• 
  @Shenanigans4x410 ай бұрын

  Cheers mate! Always willing to give things a crack 👍

• 
  @gonzotk42111 ай бұрын

  I can barely hear you mate

• 
  @Shenanigans4x410 ай бұрын

  Gotta work out how to do audio properly 🤣

• 
  @justinlane777311 ай бұрын

  Hey mate do you know if you can get those brackets by them self?

• 
  @Shenanigans4x410 ай бұрын

  Probably best to ask PPD Perfomance mate Or make your own, they're just some 50mm box tube with a bracing plated welded in the middle

• 
  @spiritualinsight11 ай бұрын

  What year is your ranger?

• 
  @Shenanigans4x411 ай бұрын

  Hey mate, mines a 2013 XL

• 
  @spiritualinsight11 ай бұрын

  ​@@Shenanigans4x4ok. Mines a 1998

• 
  @Shenanigans4x411 ай бұрын

  That will most likely use a throttle cable not electronic throttle

• 
  @spiritualinsight11 ай бұрын

  @@Shenanigans4x4 it does. Which is why I was asking what year yours was.