Пікірлер

• 
  @getmymail26762 күн бұрын

  Like everyone else: The video would have been more helpful if you had shown us how to install the new gearwheel and show us how the blender is now working after the wheel has been replaced

• 
  @Chileno1974 күн бұрын

  Thank you for posting. I had the same issue with the belt. Your video was very helpful.

• 
  @lorenavelazquez13394 күн бұрын

  How long it's a right time for a foot massage? And how often?

• 
  @matraz107 күн бұрын

  A new cavity?! What? I repaired my old microwave by taking out the cavity, filing out the rust hole and using multi folded aluminum foil molded into the sanded out smooth rust free hole and taped it into place from behind. Then I smoothed out the inside a little and repainted the cavity with microwave cavity paint. Had two holes in the circle I repaired three or four years ago. Still use the microwave in the garage for food when its late at night.

• 
  @cherylsherwood117712 күн бұрын

  I just want to say that was no help u didn't even show how to change it I didn't see one thing that helped

• 
  @chengone215 күн бұрын

  What is wrong with the capacitor that causing fuse to blow? Is the capacitor shorting out or some other issue?

• 
  @lunker100215 күн бұрын

  The first step is missing. What type of screwdriver is used to remove the base cover? Without access to the lines, descaling is not possible.

• 
  @gphilipc203117 күн бұрын

  Sounds like a good welding machine to me.

• 
  @ChrisKalil-id2ki20 күн бұрын

  could a magnetron be replaced with another one with higher output as long as the size fits

• 
  @erickobure474123 күн бұрын

  Thanks live long,,so helpful indeed!!!

• 
  @BrushBruh68429 күн бұрын

  i did exactly like u did but it won't start can u help me pls may be like if there's sum issue to repair more

• 
  @jesterrajАй бұрын

  where got that to buy?

• 
  @Supanova7GАй бұрын

  Thank you! Very easy once explained.

• 
  @Justice-101Ай бұрын

  How do you know it is discharged if no sparkle?

• 
  @Justice-101Ай бұрын

  What do you mean by disharge the capacitor? 😮

• 
  @jakemusmaximus7991Ай бұрын

  Shut that damn dog up!!!

• 
  @spanishDoll1Ай бұрын

  How to fix the plug

• 
  @javierq6268Ай бұрын

  How you know the capacitor was the problem? How you tested?

• 
  @JackHermit-rw2lvАй бұрын

  Thank you man.Its very straight forward, even dumb ass like me could do it

• 
  @wateringflowerАй бұрын

  I'm from Trinidad. Where do I get the capacitor to buy?

• 
  @tedg3721Ай бұрын

  VERY NICE!! THIS IS EXACTLY what's wrong with my model, Gourmia GAF826 Air Fryer that I picked up from costco.. There's a loose connection in mine, and it started by not turning off when I would pull the basket out. And then one day it just wont turn on at all. I knew it's a switch related issue and not the thermal fuse. It would click on for a half second if I slammed the basket in- telling me it;s a bad connection. My question is WHERE DO YOU GET THIS SWITCH??? Can please tell me where I would find this, or what this part number is?? Thanks for you help

• 
  @taberavАй бұрын

  How and Where did you find a replacement capacitor of the proper configuration?

• 
  @gunta19912 ай бұрын

  Where you get the capacitor to buy ?

• 
  @MixtPersonality2 ай бұрын

  If you’re from Trinidad can I get a contact number for your business?

• 
  2 ай бұрын

  how did u remove the armature?

• 
  @wadap02 ай бұрын

  Thanks so much for this. It was REALLY helpful.

• 
  @GR-ef1hx2 ай бұрын

  mine shows all the lights on at once.numbers and options all on whats the problem ?

• 
  @Tube0692 ай бұрын

  Too hard to understand because of the thick accent.

• 
  @user-yx8rq6vr8i2 ай бұрын

  need to learn how to speak English mate carnt understand wat u are saying

• 
  @rtrogers012 ай бұрын

  Please show us how to replace the new one?

• 
  @byl34082 ай бұрын

  thanks for sharing, however, you did not have to remove the fan blade, just use some gloves or a wash rag to hold the fan, while you use the plier to remove the drive stud. could have saved you a few minutes. Took me about 5 minutes to replace mine

• 
  @AirmanCS3 ай бұрын

  OMG I was looking for a video with an oscilloscope and recommendation for what RESISTOR to use... not some pliers and a darwin award candidate video D: thanks a lot to the ones upvoting the comments warning about this

• 
  @ii64193 ай бұрын

  Hi I have oster blander I tried to Fixed Oster Osterizer Blender Carbons

• 
  @kilermanjaro2003 ай бұрын

  What kind of oil is that and where can I get it please??

• 
  @kilermanjaro2003 ай бұрын

  What is the best lubricant to use for my lask fan??

• 
  @mr.fixit36043 ай бұрын

  Machine oil.

• 
  @user-us3dp7tb3m3 ай бұрын

  You are an AWESOME instructor...very informative, easy to understand, and downright interesting! :)

• 
  @PomPom2103 ай бұрын

  Thank you so much. I know the fuse blew in my 30 year old Sharp Carousel and was told it couldn´t be fixed so I bought a new small microwave and I do not like it. After seeing this video I will buy my own fuse (s) and see if that's all it needs, if it still doesn´t work I will buy a new capacitor and hope that will work. No other microwave can beat my Carousel 11.

• 
  @tombanes3 ай бұрын

  My sharp microwave works but is leaking dielectric oil from the capacitor. It is strange that No One mentions this as a problem or possible failure. Some people even swear up and down that there is no oil in these HV capacitors. They are all filled with oil. ( non hazardous but yes oil).

• 
  @education91353 ай бұрын

  Were does that cover go can u show us inside and did u buy thd new cover

• 
  @christinemusyimi16093 ай бұрын

  Hi,my blender is not spinning at all and when i remove the jug there is smoke under neath

• 
  @miamichelleevans3 ай бұрын

  Thank you!🙏🏽

• 
  @miamichelleevans3 ай бұрын

  Thank you!!🙏🏽

• 
  @jeanluccharles81923 ай бұрын

  Hello, regarding the same brand, how to replace the rings?

• 
  @sabahkhan28503 ай бұрын

  How to fix the activator buttons? Those black small round ones that get depressed to start the Nutribullet Rx. One of those activator buttons in my Nutribullet Rx is not springy anymore and as a result my Nutribullet doesn’t work. Please advise on how to fix it

• 
  @faulypi3 ай бұрын

  Are you trini? Where is the video showing how to disassemble this model?

• 
  @laurabarrerablas18313 ай бұрын

  Mi taladro no enciende!

• 
  @nnardo4 ай бұрын

  Where can I buy one of those capacitor and at what price I believe that's the problem with my carousel

• 
  @chellio64634 ай бұрын

  Are there any other fixes? I’m getting a reading on the multimeter for both sets of fuses. The air fryer won’t turn on so I’m not sure what to do

• 
  @gingermill69034 ай бұрын

  I just get one when I can have this switch 220V pls

• 
  @carycharles13984 ай бұрын

  Mr. Fix It, can a 1.00uf capacitor be used as a replacement for a 1.05uf capacitor? Thanks.