Dont put plastic on that board, it could start a fire and became worse near the battery
@danielnilsson42453 ай бұрын
Thanks for the video. My battery had one pad that had no contact, after soldering it, it was possible to charge again
@YANDEX30V8 ай бұрын
My issue is; i cannot start my engine to warm.oil.through!!
@danielcili96069 ай бұрын
my battery is blinking red not blue like you what does it means?
@CabrioDriving10 ай бұрын
With the foil ... what about the heat? I would not do it this way.
@piratepvp575811 ай бұрын
tnx alot :)
@asfcfrov7695 Жыл бұрын
THANK YOU GOD VORKİNGGG 3 DAYS PROBLEM AND YOU VİDEO
@valdasmarcinauskas7839 Жыл бұрын
Thank you! 👍
@ex0798 Жыл бұрын
*plays with ungrounded wires while running current through charger* 😂😂
@easeow Жыл бұрын
How do you test to see if the battery is dead? I followed what you did but it's still not charging.
@filipjakubik1767 Жыл бұрын
Helped, thanks Mi electric scooter Pro 2 version. You have my respect man!
@ledgic1317 Жыл бұрын
I picked one of these up 5 days ago. I'm only one of 2 people with one here in atlanta Georgia. Out the box it does 55mph. Gps verified. 60mile range.
@deedas Жыл бұрын
Bro, how did you get inside it? It's got some allen looking screws that won't let anything go in because it's got a nip of metal raised in the center of it.
@jlovee2211 Жыл бұрын
torq screw bro, theyre not hex
@jasewale Жыл бұрын
Superb video, would it be possible to do a long term update on the bike please?
@plinsavi Жыл бұрын
This video was very helpful. Thank you, mate!
@StreamerClips369 Жыл бұрын
Mine was already tight do u know whats the problem with mine? When i put it to charge its still green please help quick
@novasigma5964 Жыл бұрын
I'm going to use liquid silicone to keep it from jiggling about same as the motor area
@andw9348 Жыл бұрын
Thank you so much! All it took was a little wiggling of the connector and now the battery charges as before. It is also for videos like these that I love the KZread community
@timoflynn82242 жыл бұрын
Very good review - thank you. You're very brave to do the Snake Pass in winter!
@arslano45312 жыл бұрын
Just having this problem now, hope it will be the same as yours- will open it on weekend, thanks a lot though !
@wimtorfs2 жыл бұрын
Thanks a lot - fixed it for me!
@OKManNoOne2 жыл бұрын
Can you tell more about MOT or servicing? do you take it to NIU dealer or any mechanic can do this?
@jesusparedes28332 жыл бұрын
Found one on the curb/sidewalk, someone put it out, read E1 , I changed the front tire motor, you can purchase online around $50 and, it works fine ,👍😊
@Dunkelzeitgeist2 жыл бұрын
Nice video! How’s it going now? Do you still have it?
@malcb18642 жыл бұрын
Take it you can't really use it in wet or in the winter.
@thomasrimell80642 жыл бұрын
Yes you can use it in heavy rain, storms winter. No issues at all.
@LilViking2 жыл бұрын
I tried this, I saw no issues with a loose cable however, I notice in the video you have a blue light flashing, mine is flashing RED. Is this an indication as to what's wrong with my scooter?
@SteveW672 жыл бұрын
Excellent informative thanks. Ignore the rude comments, there’s always knockers who contribute nothing positive themselves.
@SteveW672 жыл бұрын
Excellent video, lots of info thanks. Ignore the rude detractors, sadly human nature standards are plummeting daily. 😎👍
@ClanGunnBushcraft2 жыл бұрын
Cheers brother, big help
@thomasrimell80642 жыл бұрын
:)
@440ccfreestyler2 жыл бұрын
Disnt even ride it
@malmoran86432 жыл бұрын
He's just waffling on and on and on .
@danielzhelyazkov48562 жыл бұрын
thank you for the video mate
@westmcgee93202 жыл бұрын
No concerns about heat dissipation when you’ve stuff plastic over those components?
@MortenHaulik2 жыл бұрын
I think I have exactly the same problem, but I can't see what you are doing with the pen or where it should be aligned.
@BUZZYBUZZIE2 жыл бұрын
Classic 👌
@frankstocker54752 жыл бұрын
Bubble wrap will cause the Mosfets to overheat, better to use some silicon.
@stevewood25722 жыл бұрын
I have looked at these on line. We have a van conversion motorhome and would consider a scooter on a rear carrier. Do you think its welght is prohibitive?
@CharlesLeGoff2 жыл бұрын
I just kicked a bit at the bottom where it is supposed to be disconnected... and it worked ! (I did not open it !)
@coolhand064052 жыл бұрын
Thanks very much for your very good video..I have one question I stay in a high rise building with lifts …how long is it ? and do u think I could get it in a lift as I don’t want it stolen ….thanks in advance and keep up the good work 👏🏻🏴🤘🏻
@n.u.k.21882 жыл бұрын
This kind of fixes my problem, but... As soon as I start screwing the screws back in it goes back to green. As soon as the "lid" starts to tighten it goes back to green.
@BookwormSkates2 жыл бұрын
Please post an update about reliability and durability!
@saifullahimran41002 жыл бұрын
Good video nice and clear
@andreimindru9302 жыл бұрын
First let the scooter cool off a little before trying this. It won't charge if it detects high temperature.
@wioleta35682 жыл бұрын
Thank you, problem is sloved🤟🏻
@whatonearth86032 жыл бұрын
A year on how are you getting on with this? I’m wondering how it has done over another peaks winter
@StefTechSurfer2 жыл бұрын
Worth a return imo if you can. (E.g. Amazon or anywhere). Had the same issue with our S1 scooter. I remember I jumped a bit with my scooter and then it doesn't charge. This could explain it.
@ianofliverpool77012 жыл бұрын
I`m sorry son I don`t wish to offend but your review is way to long, a 5 minute detailed review of the NIU NGT is all that's require.
@4f3ll6r3 жыл бұрын
My scooter pro is it same way to fix it ? Thank you
Пікірлер
Thanks, saved my day
stupid,bubles will cause batery overtemperature
Dont put plastic on that board, it could start a fire and became worse near the battery
Thanks for the video. My battery had one pad that had no contact, after soldering it, it was possible to charge again
My issue is; i cannot start my engine to warm.oil.through!!
my battery is blinking red not blue like you what does it means?
With the foil ... what about the heat? I would not do it this way.
tnx alot :)
THANK YOU GOD VORKİNGGG 3 DAYS PROBLEM AND YOU VİDEO
Thank you! 👍
*plays with ungrounded wires while running current through charger* 😂😂
How do you test to see if the battery is dead? I followed what you did but it's still not charging.
Helped, thanks Mi electric scooter Pro 2 version. You have my respect man!
I picked one of these up 5 days ago. I'm only one of 2 people with one here in atlanta Georgia. Out the box it does 55mph. Gps verified. 60mile range.
Bro, how did you get inside it? It's got some allen looking screws that won't let anything go in because it's got a nip of metal raised in the center of it.
torq screw bro, theyre not hex
Superb video, would it be possible to do a long term update on the bike please?
This video was very helpful. Thank you, mate!
Mine was already tight do u know whats the problem with mine? When i put it to charge its still green please help quick
I'm going to use liquid silicone to keep it from jiggling about same as the motor area
Thank you so much! All it took was a little wiggling of the connector and now the battery charges as before. It is also for videos like these that I love the KZread community
Very good review - thank you. You're very brave to do the Snake Pass in winter!
Just having this problem now, hope it will be the same as yours- will open it on weekend, thanks a lot though !
Thanks a lot - fixed it for me!
Can you tell more about MOT or servicing? do you take it to NIU dealer or any mechanic can do this?
Found one on the curb/sidewalk, someone put it out, read E1 , I changed the front tire motor, you can purchase online around $50 and, it works fine ,👍😊
Nice video! How’s it going now? Do you still have it?
Take it you can't really use it in wet or in the winter.
Yes you can use it in heavy rain, storms winter. No issues at all.
I tried this, I saw no issues with a loose cable however, I notice in the video you have a blue light flashing, mine is flashing RED. Is this an indication as to what's wrong with my scooter?
Excellent informative thanks. Ignore the rude comments, there’s always knockers who contribute nothing positive themselves.
Excellent video, lots of info thanks. Ignore the rude detractors, sadly human nature standards are plummeting daily. 😎👍
Cheers brother, big help
:)
Disnt even ride it
He's just waffling on and on and on .
thank you for the video mate
No concerns about heat dissipation when you’ve stuff plastic over those components?
I think I have exactly the same problem, but I can't see what you are doing with the pen or where it should be aligned.
Classic 👌
Bubble wrap will cause the Mosfets to overheat, better to use some silicon.
I have looked at these on line. We have a van conversion motorhome and would consider a scooter on a rear carrier. Do you think its welght is prohibitive?
I just kicked a bit at the bottom where it is supposed to be disconnected... and it worked ! (I did not open it !)
Thanks very much for your very good video..I have one question I stay in a high rise building with lifts …how long is it ? and do u think I could get it in a lift as I don’t want it stolen ….thanks in advance and keep up the good work 👏🏻🏴🤘🏻
This kind of fixes my problem, but... As soon as I start screwing the screws back in it goes back to green. As soon as the "lid" starts to tighten it goes back to green.
Please post an update about reliability and durability!
Good video nice and clear
First let the scooter cool off a little before trying this. It won't charge if it detects high temperature.
Thank you, problem is sloved🤟🏻
A year on how are you getting on with this? I’m wondering how it has done over another peaks winter
Worth a return imo if you can. (E.g. Amazon or anywhere). Had the same issue with our S1 scooter. I remember I jumped a bit with my scooter and then it doesn't charge. This could explain it.
I`m sorry son I don`t wish to offend but your review is way to long, a 5 minute detailed review of the NIU NGT is all that's require.
My scooter pro is it same way to fix it ? Thank you
You're a life saver