I use peatys degreaser for my mech because it doesnt contaminate my breaks if you need a recommendation. They also do great cleaning products and lubes for chain
@spicymountainbike2 күн бұрын
Never heard of it but I’ll check it out. Thanks man!
@iskiiwizz5364 күн бұрын
bro I was always covering my disk brakes with a towel. It would get wet and eveyrthing. I never thought about a plastic bag. U just changed the way I will clean my bike thanks man
@spicymountainbike4 күн бұрын
Glad the video helped you out! I wrapped 3 bags on there because sometimes those Walmart bags have holes in them. It works a lot better than the old towel! ✌️
@hammertime77407 күн бұрын
Looks like some cool trails, you still rockn the 5010.
@spicymountainbike7 күн бұрын
It’s a fun spot to ride. Still got the 5010. It’s still my favorite bike. Next video will be with the 5010 for sure.
@Abdiel_067 күн бұрын
Q productos usaste para limpiarla ?
@spicymountainbike7 күн бұрын
Utilicé un cepillo de dientes, una toalla de microfibra y un spray desengrasante simplegreen.
@resynthesizer45659 күн бұрын
First time I rode one, I thought it cornered weird. Then I realized, I was coming into corners MUCH faster. Their ability to roll obstacles is incredible.
@spicymountainbike9 күн бұрын
You know I thought the same thing at first but yeah the corner speed is insane and the traction in turns is substantially better than my 27.5. Actually the entire ride has become incredibly better. Climbing is slower than 27.5 but a lot smoother with better traction. I’ve only ridden that bike one time so far and it’s still the best ride I’ve ever had since I started mountain biking in 2015.
@spicymountainbike9 күн бұрын
Hey guys I hope you enjoy this video as much as i enjoyed the ride
@foryatroubles_official9 күн бұрын
where was this?
@spicymountainbike9 күн бұрын
@DestinationDiariesAI-s3c El Paso Texas. You can find the trails by searching the trail names in the video.
@foryatroubles_official7 күн бұрын
@@spicymountainbike Aight thx
@spicymountainbike7 күн бұрын
🤙
@mikeep428310 күн бұрын
What’s it called mate? Where’s it from? That’s smart as!
@spicymountainbike9 күн бұрын
www.amazon.com/stores/Granite/page/805E2253-EAEA-43C0-AB2B-26C7E5EA5500?ref_=ast_bln&store_ref=bl_ast_dp_brandLogo_sto It is smart man. I’m really impressed with the design.
@flxtz30615 күн бұрын
Hey can u help me with my maguras they just don’t work I tried bleeding I don’t know what to do anymore I’m not a brake expert I’m new to this I have no idea what to do
@spicymountainbike14 күн бұрын
I have some other videos on bleeding the maguras. If you got oil on your pads you will have to replace them first before you can bleed the brakes. All you need to do is put the funnel in the bleed port on the top of the brake lever and put oil into it and squeeze the lever repeatedly until all the air comes out. Go ride and then repeat the process. Eventually all the air comes out. Watch some of my other bleed videos g.
20 күн бұрын
manual from mt5e-stop says, Max 1.8 mm thickness rotor, all magura rotors are 2 mm, now my brake is touching the pads. how can i fix that ? it's braking already if i not brake. can somebody help me ?
@spicymountainbike20 күн бұрын
You have to have it exact. Theres not much room.
@andrejpejovic324523 күн бұрын
Are there flip chips on both sides like left and right, because my flip chip feels loose. When i pick up my bike i feel it and when i put my finger on the flip chip i can feel it moving
@spicymountainbike23 күн бұрын
Yes you have to flip both sides at the same time. If it feels loose check your bolt and make sure it’s tight and that you didn’t lose the washes that are on the side of the shock body.
@brandonmolina363728 күн бұрын
Be careful reducing pressure past 30% sag, past that point and you are just reducing your travel and making your fork feel stiffer even though the air pressure is lower. Also the pike can take up to 6 tokens
@spicymountainbike28 күн бұрын
I had 2 tokens but then removed 1. It’s been pretty good with 1 token but I’m not too impressed with the new pike. It’s too flexy and I can hear some kind of metallic cha Ching sound when I jump at certain angles. I should’ve gotten the lyrik 140mm fork.
@EMTBAFVАй бұрын
Thats one small ass head 55cm lol
@Tilman_MTBАй бұрын
WTF
@spicymountainbikeАй бұрын
🌶️
@sashkawest1328Ай бұрын
👍👍👍👍👍
@spicymountainbikeАй бұрын
🙌
@MamboBАй бұрын
Just quick bleed to vacuum the air out, it works within 3-4 times doing it. My first time owning magura MT5’s and i was able to do it fine, no need to wait and ride around first, just fill 15ml of royal blood and syringe with hole at 30mil, pull up on lever bleed port to vacuum out air, much easier.
@gur262Ай бұрын
How did you know i literally have a big ass head?(60+)
@spicymountainbikeАй бұрын
🤯
@jonathanhowson6420Ай бұрын
Just bought the mt7 with HS3 leavers and 200mm rotors for £300, but then seen a friend of a friend riding the Lewis brakes and they are absolutely gorgeous!
@spicymountainbikeАй бұрын
Yeah the Lewis are ok but you’re better off with the Magura hc3. He’ll probably end up getting maguras too eventually.
@mikecisneros9751Ай бұрын
Nice video. The 1/1 sounds pissed off, I like it 👍🏼
@spicymountainbikeАй бұрын
Thanks man. The 1/1 is definitely my favorite hub
@user-hu5eu4gj2p2 ай бұрын
Mt7 pro and mt7 raceline, both with hc-w lever..
@spicymountainbike2 ай бұрын
Mt7 with hc3 and mt race line with HC lever.
@user-ot2qg8np8y2 ай бұрын
Never ride an alloy rim without a Tannus Armour insert.
@spicymountainbike2 ай бұрын
For sure man tannus is great. The only reason I use cushcore over tannus is that you can ride with a flat with the cushcore. I do prefer tannus otherwise
@user-ot2qg8np8y2 ай бұрын
@@spicymountainbike I’m 60, so ole Skool. Always ridden with inner tubes. Never will trust a tubeless setup, so now I ride with self healing inner tubes and a Tannus Armour insert. I’ve only ridden it with a flat ONCE and it got me home, no problem but I wouldn’t do it again.
@spicymountainbike2 ай бұрын
@user-ot2qg8np8y 60 is not too old for tubeless. You’ll enjoy riding a lot more with tubeless installed. I still use tubes in my dirtbike though.
@themekanic0692 ай бұрын
Not recommended. Bleed properly to get tge best braking possible.
@durianriders2 ай бұрын
great color
@joegonz19832 ай бұрын
lol thx. So yes both sounds are great. But talking about pedal efficiency, who’s the winner?
@spicymountainbike2 ай бұрын
1/1 feels lighter and more efficient even though it has Abec 3 bearings and the hydra have abec 5.
@joegonz19832 ай бұрын
@@spicymountainbike interesting. Thx!
@spicymountainbike2 ай бұрын
🙌
@techdeezout92013 ай бұрын
Santa Cruz is kind by a holdings group. I think it’s Pon holdings. They own several bike brands.
@spicymountainbike2 ай бұрын
Can’t blame them.
@techdeezout92013 ай бұрын
I’d stick to 27.5 for the 5010. I have the 5010 v4 and I converted the 140mm fork to a 150mm travel fork and it just rides really good.
@spicymountainbike3 ай бұрын
If I hit 1000 subscribers I’ll change mine to 27.5 with a 160mm fork.
@Danny-nt6im3 ай бұрын
thanks for the video mate i should have watched this first i just did this on my 5010 and it was a nightmare 45min muck around
@spicymountainbike3 ай бұрын
I think it took me an hour the first time I tried it. It’s hard not to let the pieces fall down inside the linkage. Thanks for the comment! Glad you found this video!
@allanleal3 ай бұрын
Hello! What is the size of your helmet? small or medium?
@spicymountainbike3 ай бұрын
SMALL
@allanleal3 ай бұрын
@@spicymountainbike What is your circumference? (Sorry, I want to base it on my size)
@allanleal3 ай бұрын
@@spicymountainbike My circumference is 55.5, but I'm afraid the helmet is too shallow (it won't sink inside the head)
@spicymountainbike3 ай бұрын
@allanleal I’m at about 21.7”. I’m in between medium and small but the small fits very good. The speedrame pro fits a little big I think.
@spicymountainbike3 ай бұрын
Try the medium. It will sink onto your head more.
@jeremyjackson86433 ай бұрын
Nice review. Do all versions come with that magnet strap?
@spicymountainbike3 ай бұрын
Thanks man. Yes all the versions of the PRO have the magnet. It’s really worth it.
@jeremyjackson86433 ай бұрын
@@spicymountainbike Thanks for the reply. And you 100% have the best colorway! I don't like the new one's on the site with the small fox logo. I measured my head yesterday and it came to 21.5 inches. The small size of the Fox Speedframe Pro helmet measures 20.1 - 21.7 inches and the Medium measures 21.7 - 23.2 inches. Should I opt for the Small or the Medium? I will be buying the same colorway you have but I will have to purchase via eBay since it's discontinued everywhere else. Only bad thing is the seller doesn't accept returns so I'm taking a risk. Thanks in advance if you can give advice. I'm new to this biking thing and haven't had a helmet since I was much younger.
@spicymountainbike3 ай бұрын
Yeah the other colors are ugly. That’s the only problem with the helmet. Go with the small size. Thanks dude!
@jeremyjackson86433 ай бұрын
@@spicymountainbike Thanks for the advice! Stay safe out there 👍🏾👍🏾👍🏾
@spicymountainbike3 ай бұрын
@jeremyjackson8643 thanks man you as well 🙌
@WilliamForrestBrownell3 ай бұрын
Nice, I’ll have to try the Velcro strap! I noticed it’s much easier to get the bolt out when I lift the rear tire and take the weight off that bolt too.
@spicymountainbike3 ай бұрын
Yeah you gotta wiggle it a little bit!
@gazzy555joker64 ай бұрын
The flex feels weird
@spicymountainbike4 ай бұрын
They don’t flex when the air is bled out. They’ll feel solid as a rock.
@gazzy555joker64 ай бұрын
I bought mt7 called ebc (easy bleed) they aren't easy to bleed and they're plastic and suck I regret it!
@spicymountainbike4 ай бұрын
Watch my videos and you won’t regret it anymore. Best brakes available. The levers are plastic so they’re light. It doesn’t mean they are cheap.
@gazzy555joker64 ай бұрын
@spicymountainbike they snap to easily though I got recommended these for my sur ron which is fast I don't know what will happen to them if I fall off something so heavy when they snap even on just a mountain bike think ill find some aluminium shimano levers maybe
@spicymountainbike4 ай бұрын
@gazzy555joker6 they do snap easy. Go with the HC3 levers. They will not snap.
@WilliamForrestBrownell4 ай бұрын
I’m having some trouble flipping the chip. How do you easily access both sides? I got one side out then couldn’t push out the bolt. Barely got the right side back in after.
@spicymountainbike4 ай бұрын
I’ll make a video for you. I actually figured it out after a lot of suffering. It can a nightmare but I’ve gotten to where I can change it in 1 minute flat. Stay tuned for a video.
@WilliamForrestBrownell4 ай бұрын
@@spicymountainbike thank you!
@kozel.j4 ай бұрын
I have magura mt 7 pro and its the best brake i have ever riden
@spicymountainbike4 ай бұрын
I agree!! Can’t beat MT7
@CheeseCream12054 ай бұрын
None, they all suck. I had my Madura brake for a day, and I already had a master cylinder leak. I was riding at the beach.
@s2k4425 ай бұрын
What oil to you use?
@spicymountainbike5 ай бұрын
Magura roil blood
@Christmylife785 ай бұрын
I have the Raceline MT7 with the HC3 levers. There is tons of adjustability! Been riding them for about a month and still dialing them. 30 years of MTB and these are probably going to be the best breaks I’ve ever owned. Still need a couple seasons on them.
@spicymountainbike5 ай бұрын
I also have the raceline mt7. Love the neon color. I just need another frame to put them on. Yeah man the hc3 are amazing levers and they’ll last you a lifetime. For some reason I just keep going back to the hc levers.
@cliffordrichardc6 ай бұрын
is that mullet set up not so good
@cliffordrichardc6 ай бұрын
new 5010v5 use 27.5 tire for front
@BikelifeBaltimore-yh1bw6 ай бұрын
this absolutely works!
@msjogren6 ай бұрын
Listen to the Spiceman, I rocked Shimano M485s since '08 and switched to Magura MT5 in 2022. I was worried that the MT5 was a tighter system but that is the way hydraulics started. You had a reservoir up top and you worked with getting out the air just like he does in this video. I serviced mine today and I didn't even use the funnel. I just stood over the hole and dripped in the mineral oil little by little while squeezing the brakes regularly. Worked like a charm.
@spicymountainbike6 ай бұрын
That works too!
@DenisZolotoy6 ай бұрын
привет что за фара-свет у тебя на вельчике ?
@spicymountainbike6 ай бұрын
Hi, it’s a magicshine monteer 8000v2. magicshine.com/collections/bike-light-with-remote/products/monteer-8000-mountain-bike-lights
@LVCMTB6 ай бұрын
I have magura mt7 pro ❤
@spicymountainbike6 ай бұрын
Great choice!
@karp33067 ай бұрын
I have the same fork, what is your weight? I’m thinking two vs three for Me 192 lbs. thx for sharing
@spicymountainbike7 ай бұрын
You won’t want more than 1 spacer in the 140mm fork. Anymore than 1 spacer you’ll feel it bottom out on the plastic spacers. I only have 1 spacer now and it feels almost bottomless and I’m about 170 with all my gear on right now. 55psi in the fork for me.
@user-jq8hv8io6c7 ай бұрын
Is it louder than the Rapid Drive Hub 108T?
@spicymountainbike7 ай бұрын
I think it’s a little louder
@crankerson7 ай бұрын
Thank you for this video. Finally a good comparison between the two
@spicymountainbike7 ай бұрын
Glad you enjoyed it!!
@estmike27957 ай бұрын
Why you prepared size Small? 51 55? Right? What is your height?
@spicymountainbike7 ай бұрын
5’11” yes small because I have a small brain
@kinbote7 ай бұрын
LOL, where are you riding? Is that your "trail"?
@spicymountainbike7 ай бұрын
Yeah built it all with my bare hands
@kinbote7 ай бұрын
? @spicymountainbike So it is straight down a small hill with full on brakes, onto the concrete, for another straight up small hill. The 12 seconds full brake downhill looked gnarly!
@spicymountainbike7 ай бұрын
@kinbote I probably don’t even need the brakes now that I’m used to the bike. I’ll try it again with no brakes and see if I can clear the other side easier. It’s steeper than the camera makes it look too
@erikalfan10278 ай бұрын
Thank you friends for sharing the derivative video which is very fun and extreme with good and beautiful nature
Пікірлер
Step 1: pour it in 🤦♂️
Nice!
Thanks!
I use peatys degreaser for my mech because it doesnt contaminate my breaks if you need a recommendation. They also do great cleaning products and lubes for chain
Never heard of it but I’ll check it out. Thanks man!
bro I was always covering my disk brakes with a towel. It would get wet and eveyrthing. I never thought about a plastic bag. U just changed the way I will clean my bike thanks man
Glad the video helped you out! I wrapped 3 bags on there because sometimes those Walmart bags have holes in them. It works a lot better than the old towel! ✌️
Looks like some cool trails, you still rockn the 5010.
It’s a fun spot to ride. Still got the 5010. It’s still my favorite bike. Next video will be with the 5010 for sure.
Q productos usaste para limpiarla ?
Utilicé un cepillo de dientes, una toalla de microfibra y un spray desengrasante simplegreen.
First time I rode one, I thought it cornered weird. Then I realized, I was coming into corners MUCH faster. Their ability to roll obstacles is incredible.
You know I thought the same thing at first but yeah the corner speed is insane and the traction in turns is substantially better than my 27.5. Actually the entire ride has become incredibly better. Climbing is slower than 27.5 but a lot smoother with better traction. I’ve only ridden that bike one time so far and it’s still the best ride I’ve ever had since I started mountain biking in 2015.
Hey guys I hope you enjoy this video as much as i enjoyed the ride
where was this?
@DestinationDiariesAI-s3c El Paso Texas. You can find the trails by searching the trail names in the video.
@@spicymountainbike Aight thx
🤙
What’s it called mate? Where’s it from? That’s smart as!
www.amazon.com/stores/Granite/page/805E2253-EAEA-43C0-AB2B-26C7E5EA5500?ref_=ast_bln&store_ref=bl_ast_dp_brandLogo_sto It is smart man. I’m really impressed with the design.
Hey can u help me with my maguras they just don’t work I tried bleeding I don’t know what to do anymore I’m not a brake expert I’m new to this I have no idea what to do
I have some other videos on bleeding the maguras. If you got oil on your pads you will have to replace them first before you can bleed the brakes. All you need to do is put the funnel in the bleed port on the top of the brake lever and put oil into it and squeeze the lever repeatedly until all the air comes out. Go ride and then repeat the process. Eventually all the air comes out. Watch some of my other bleed videos g.
manual from mt5e-stop says, Max 1.8 mm thickness rotor, all magura rotors are 2 mm, now my brake is touching the pads. how can i fix that ? it's braking already if i not brake. can somebody help me ?
You have to have it exact. Theres not much room.
Are there flip chips on both sides like left and right, because my flip chip feels loose. When i pick up my bike i feel it and when i put my finger on the flip chip i can feel it moving
Yes you have to flip both sides at the same time. If it feels loose check your bolt and make sure it’s tight and that you didn’t lose the washes that are on the side of the shock body.
Be careful reducing pressure past 30% sag, past that point and you are just reducing your travel and making your fork feel stiffer even though the air pressure is lower. Also the pike can take up to 6 tokens
I had 2 tokens but then removed 1. It’s been pretty good with 1 token but I’m not too impressed with the new pike. It’s too flexy and I can hear some kind of metallic cha Ching sound when I jump at certain angles. I should’ve gotten the lyrik 140mm fork.
Thats one small ass head 55cm lol
WTF
🌶️
👍👍👍👍👍
🙌
Just quick bleed to vacuum the air out, it works within 3-4 times doing it. My first time owning magura MT5’s and i was able to do it fine, no need to wait and ride around first, just fill 15ml of royal blood and syringe with hole at 30mil, pull up on lever bleed port to vacuum out air, much easier.
How did you know i literally have a big ass head?(60+)
🤯
Just bought the mt7 with HS3 leavers and 200mm rotors for £300, but then seen a friend of a friend riding the Lewis brakes and they are absolutely gorgeous!
Yeah the Lewis are ok but you’re better off with the Magura hc3. He’ll probably end up getting maguras too eventually.
Nice video. The 1/1 sounds pissed off, I like it 👍🏼
Thanks man. The 1/1 is definitely my favorite hub
Mt7 pro and mt7 raceline, both with hc-w lever..
Mt7 with hc3 and mt race line with HC lever.
Never ride an alloy rim without a Tannus Armour insert.
For sure man tannus is great. The only reason I use cushcore over tannus is that you can ride with a flat with the cushcore. I do prefer tannus otherwise
@@spicymountainbike I’m 60, so ole Skool. Always ridden with inner tubes. Never will trust a tubeless setup, so now I ride with self healing inner tubes and a Tannus Armour insert. I’ve only ridden it with a flat ONCE and it got me home, no problem but I wouldn’t do it again.
@user-ot2qg8np8y 60 is not too old for tubeless. You’ll enjoy riding a lot more with tubeless installed. I still use tubes in my dirtbike though.
Not recommended. Bleed properly to get tge best braking possible.
great color
lol thx. So yes both sounds are great. But talking about pedal efficiency, who’s the winner?
1/1 feels lighter and more efficient even though it has Abec 3 bearings and the hydra have abec 5.
@@spicymountainbike interesting. Thx!
🙌
Santa Cruz is kind by a holdings group. I think it’s Pon holdings. They own several bike brands.
Can’t blame them.
I’d stick to 27.5 for the 5010. I have the 5010 v4 and I converted the 140mm fork to a 150mm travel fork and it just rides really good.
If I hit 1000 subscribers I’ll change mine to 27.5 with a 160mm fork.
thanks for the video mate i should have watched this first i just did this on my 5010 and it was a nightmare 45min muck around
I think it took me an hour the first time I tried it. It’s hard not to let the pieces fall down inside the linkage. Thanks for the comment! Glad you found this video!
Hello! What is the size of your helmet? small or medium?
SMALL
@@spicymountainbike What is your circumference? (Sorry, I want to base it on my size)
@@spicymountainbike My circumference is 55.5, but I'm afraid the helmet is too shallow (it won't sink inside the head)
@allanleal I’m at about 21.7”. I’m in between medium and small but the small fits very good. The speedrame pro fits a little big I think.
Try the medium. It will sink onto your head more.
Nice review. Do all versions come with that magnet strap?
Thanks man. Yes all the versions of the PRO have the magnet. It’s really worth it.
@@spicymountainbike Thanks for the reply. And you 100% have the best colorway! I don't like the new one's on the site with the small fox logo. I measured my head yesterday and it came to 21.5 inches. The small size of the Fox Speedframe Pro helmet measures 20.1 - 21.7 inches and the Medium measures 21.7 - 23.2 inches. Should I opt for the Small or the Medium? I will be buying the same colorway you have but I will have to purchase via eBay since it's discontinued everywhere else. Only bad thing is the seller doesn't accept returns so I'm taking a risk. Thanks in advance if you can give advice. I'm new to this biking thing and haven't had a helmet since I was much younger.
Yeah the other colors are ugly. That’s the only problem with the helmet. Go with the small size. Thanks dude!
@@spicymountainbike Thanks for the advice! Stay safe out there 👍🏾👍🏾👍🏾
@jeremyjackson8643 thanks man you as well 🙌
Nice, I’ll have to try the Velcro strap! I noticed it’s much easier to get the bolt out when I lift the rear tire and take the weight off that bolt too.
Yeah you gotta wiggle it a little bit!
The flex feels weird
They don’t flex when the air is bled out. They’ll feel solid as a rock.
I bought mt7 called ebc (easy bleed) they aren't easy to bleed and they're plastic and suck I regret it!
Watch my videos and you won’t regret it anymore. Best brakes available. The levers are plastic so they’re light. It doesn’t mean they are cheap.
@spicymountainbike they snap to easily though I got recommended these for my sur ron which is fast I don't know what will happen to them if I fall off something so heavy when they snap even on just a mountain bike think ill find some aluminium shimano levers maybe
@gazzy555joker6 they do snap easy. Go with the HC3 levers. They will not snap.
I’m having some trouble flipping the chip. How do you easily access both sides? I got one side out then couldn’t push out the bolt. Barely got the right side back in after.
I’ll make a video for you. I actually figured it out after a lot of suffering. It can a nightmare but I’ve gotten to where I can change it in 1 minute flat. Stay tuned for a video.
@@spicymountainbike thank you!
I have magura mt 7 pro and its the best brake i have ever riden
I agree!! Can’t beat MT7
None, they all suck. I had my Madura brake for a day, and I already had a master cylinder leak. I was riding at the beach.
What oil to you use?
Magura roil blood
I have the Raceline MT7 with the HC3 levers. There is tons of adjustability! Been riding them for about a month and still dialing them. 30 years of MTB and these are probably going to be the best breaks I’ve ever owned. Still need a couple seasons on them.
I also have the raceline mt7. Love the neon color. I just need another frame to put them on. Yeah man the hc3 are amazing levers and they’ll last you a lifetime. For some reason I just keep going back to the hc levers.
is that mullet set up not so good
new 5010v5 use 27.5 tire for front
this absolutely works!
Listen to the Spiceman, I rocked Shimano M485s since '08 and switched to Magura MT5 in 2022. I was worried that the MT5 was a tighter system but that is the way hydraulics started. You had a reservoir up top and you worked with getting out the air just like he does in this video. I serviced mine today and I didn't even use the funnel. I just stood over the hole and dripped in the mineral oil little by little while squeezing the brakes regularly. Worked like a charm.
That works too!
привет что за фара-свет у тебя на вельчике ?
Hi, it’s a magicshine monteer 8000v2. magicshine.com/collections/bike-light-with-remote/products/monteer-8000-mountain-bike-lights
I have magura mt7 pro ❤
Great choice!
I have the same fork, what is your weight? I’m thinking two vs three for Me 192 lbs. thx for sharing
You won’t want more than 1 spacer in the 140mm fork. Anymore than 1 spacer you’ll feel it bottom out on the plastic spacers. I only have 1 spacer now and it feels almost bottomless and I’m about 170 with all my gear on right now. 55psi in the fork for me.
Is it louder than the Rapid Drive Hub 108T?
I think it’s a little louder
Thank you for this video. Finally a good comparison between the two
Glad you enjoyed it!!
Why you prepared size Small? 51 55? Right? What is your height?
5’11” yes small because I have a small brain
LOL, where are you riding? Is that your "trail"?
Yeah built it all with my bare hands
? @spicymountainbike So it is straight down a small hill with full on brakes, onto the concrete, for another straight up small hill. The 12 seconds full brake downhill looked gnarly!
@kinbote I probably don’t even need the brakes now that I’m used to the bike. I’ll try it again with no brakes and see if I can clear the other side easier. It’s steeper than the camera makes it look too
Thank you friends for sharing the derivative video which is very fun and extreme with good and beautiful nature
Thank you friend!!