Пікірлер

• 
  @tmaxson650526 күн бұрын

  Great idea.

• 
  @tracybullock176226 күн бұрын

  @@tmaxson6505 Thanks

• 
  @MrItalianfighter1Ай бұрын

  I've had this problem for a yr now. I would bring it in the house and set it next to the air conditioning vent in order for it to cool down and get it running. It would drive my wife nuts having a compressor running in the dining room.😂😂😂😂😂😂

• 
  @tracybullock1762Ай бұрын

  Lmao. Do this and you will be happy and so will your wife. Mine still runs perfect today.

• 
  @christianblack7320Ай бұрын

  Haha damnit I replaced the switch and sensor on mine and finally found this video, hopefully this solves it. I was getting ready to roll mine off a cliff and shoot at it haha

• 
  @ATinyPlace2 ай бұрын

  Would the rear QD mount be better on the opposite side of the stock while keeping the front one in the same place for right handed shooters?

• 
  @andreevans77207 ай бұрын

  I have the same compressor, my issue is, it's not cutting out when it reaches 150psi, I've replaced the pressure switch and I'm still having the same issue - can anyone help?

• 
  @MrRruiz207 ай бұрын

  Exactly my problem and you just validated my thought process going into fixing it. Thank you for posting!

• 
  @JeremiahL161611 ай бұрын

  I have a similar unit and the motor will run but seems to stop when full and pop. Nothing after that unless unplugged and wait. Do you have any ideas. Seems to be a static motor. I can see the electric sparking as motor turns and then it pops and motor stops. Seems like a electric brake or something similar

• 
  @tracybullock176211 ай бұрын

  Does it kick back on if release the pressure?

• 
  @JeremiahL161611 ай бұрын

  @@tracybullock1762 nope

• 
  @tracybullock176211 ай бұрын

  It is definitely a thermal heat sensor switch or electric reset.I don't get the pop.So I assume it doesn't have a reset button either?

• 
  @JeremiahL161611 ай бұрын

  @@tracybullock1762 no reset. Its almost like you here a pop pop pop and thr motor stops. The fan has a cylinder on it that spins and every pop u can see a spark and the 3rd pop it shuts the motor off and wont do anything until unplugged. Plug back in and runs upto air fine. Once shuts off ehen reaches air setting it wont recycle itself at all

• 
  @tracybullock176211 ай бұрын

  Wish I could tell you what it is.But without me being there to take it apart I have no answers. Best of luck to you.

• 
  @alanramirez123able Жыл бұрын

  Did a full tune up on my 2003 4.3 did nothing was running worse Changed all injectors “spider” running like fresh of the lot now

• 
  @gerardlawrence3626 Жыл бұрын

  FAN FREAKING TASTIC!!!!!! THANK YOU

• 
  @koedypaslay4733 Жыл бұрын

  Thank you sir for sharing your knowledge, you are a good man.

• 
  @tracybullock1762 Жыл бұрын

  My pleasure

• 
  @rudygonzales8859 Жыл бұрын

  I have the same model. The unit will not shut down when it reaches 150 psi and the safety valve then blows. I have replaced the power switch and the pressure switch, three different ones all 150 psi shut off and replaced the safety valve 150 psi. Not sure why it won't shut off.

• 
  @tracybullock1762 Жыл бұрын

  The contacts on the cutoff side are functioning right.They are adjustable, has a screw with a spring around it.Try adjusting it.

• 
  @rudygonzales8859 Жыл бұрын

  @@tracybullock1762 no adjustment screw. Like yours on the right side of the manifold is the pressure switch threaded in to the manifold with two wire connections one from the power switch and the other to the wire harness

• 
  @pbyrd99 Жыл бұрын

  just installed it the same way on my gamo mach 1. works perfectly. thanks for sharing. 👍🏽

• 
  @tracybullock1762 Жыл бұрын

  Good deal.I love mine

• 
  @santanafamily4782 Жыл бұрын

  Thank you sir. Mine wasn't the fuse but it was my switched that burned out. Back up and running!

• 
  @stevelee4653 Жыл бұрын

  my truck is a s10 98 model. I have 330,000 miles on it.. and it has a mis fire about 3 months off and on.. its been a awesome little motor.. some tell me being that many miles.. it could be internal. but their is not loss of oil pressure and not smoke or knock on the engine.. I bought the truck in 98 brand new.. with only 6 miles on it. I wish I could see what is causing the misfire p0300 and p0303 codes.. had it tuned new wires and ac iridium plugs.. and new distributor cap and rotor button.. did fine and 5 months later the codes are flashing. which is p0300 and p0303 hope I can get 400,000 plus out of it.. any idea's ?? on what to look for? a distributor relearn? or throttle position sensor. or crank sensor. just curious.. if you could let me know thank you. Steve

• 
  @tracybullock1762 Жыл бұрын

  Could be the pickup coil or possibly the ignition module.

• 
  @emilydowns21832 жыл бұрын

  *Construction seemed sturdier than other units I considered **MyBest.Tools** Noise level was reasonable. Good pressure and cfm capacity for a small reasonably light compressor.*

• 
  @tracybullock17622 жыл бұрын

  3 feet

• 
  @tracybullock17622 жыл бұрын

  3 feet

• 
  @michael_mouse2 жыл бұрын

  Great sling idea Tracy, going to do the same... you did that cammo job yourself??.. excellent job dude 👍👍

• 
  @tracybullock17622 жыл бұрын

  Yes camo myself.thank you

• 
  @emmaleehartle19682 жыл бұрын

  *This does exactly what I was wanting **MyBest.Tools** Price was fantastic, lower than Harbor Freight-and it included hose and attachments, and IT IS MADE IN AMERICA, unlike Harbor Freight*

• 
  @shonuff601dj2 жыл бұрын

  Awesome video!! I’m definitely doing the same on my gamo swarm! Excellent idea bro

• 
  @paulisemonger2802 жыл бұрын

  Thank you. Great idea. I will use on my new Gamo.

• 
  @Darem_Montenegro2 жыл бұрын

  I have an exact same one like that one ..it has two issues.. I hope you can help me out…first issue it has it’s the pressure relief valve goes off when the automatic stop wouldn’t stot at its Max ..now the last time I used it it would charge air but not recharge when it would hit low ..I have to unplug and wait for it to cool down to star back on again please give me some tips

• 
  @tylerfmcclure2 жыл бұрын

  You are a genius! I recently bought a used 20 gal. Husky compressor on Craigslist for $50 that started having this problem. I was about to scrap it, but this gave it new life! Thanks for sharing!

• 
  @sst93642 жыл бұрын

  I had same issue, worked for a bit now acting up again. Thanks for explanation. Not sure if you can buy another one

• 
  @crazyDIYguy2 жыл бұрын

  Sure enough my zip tie is burnt in half I suspected that thermal disconnect you just confirmed it👍👍🥳💯

• 
  @chuckdiamond49052 жыл бұрын

  What a good idea. I tried your setup and it works great. I found the best price on Amazon if that helps. Thanks for the info.

• 
  @ryanmccormick99052 жыл бұрын

  Thanks for the post. Help me find issue with my compressor.

• 
  @jeffmontgomery19052 жыл бұрын

  Great was wondering about this. Another question what you think about these guns for squirrel hunting?

• 
  @josephstarling21192 жыл бұрын

  I soooo wish I would have seen this video before all the “extra” replacement parts I have ordered lol The only difference is I had to delete the circuit breaker altogether. I suppose it got too hot, too many times! Thanks for this video! (Even though it was years ago lol)

• 
  @dougs31843 жыл бұрын

  Thank you! Thank you! Thank you! After having this same issue over the last 6 months and replacing the pressure switch and capacitors, I came across your video. I immediately went to the compressor, cut the zip tie and moved the breaker in to the open. The compressor now works as it should! I am thankful for people like you Tracy who take the time to make videos to help others!

• 
  @andrewvu17523 жыл бұрын

  Is that a camo wrap or spray paint camo

• 
  @MagaRickn3 жыл бұрын

  Good to know. I will look at mine. Got a 20 gallon Husky that trips my shop breaker every time I turn it on. Just started doing that. Anyway, if I reset the breaker a bunch of times, the compressor will finally keep running. I was leaning towards a start capacitor or maybe a run capacitor. Thanks.

• 
  @randomconsumer44943 жыл бұрын

  Nice. I was thinking I was gonna have to screw into the plastic... That's perfect, now I am goonna go check out the paint job.

• 
  @jedimast53 жыл бұрын

  I have the same compressor as you. Wi the the same issue. I removed that circuit breaker and replace with a reset push button type. Been working great for over a year. But now my issue is when I m using it after 1 or 2 restart to refill it will just buzz like it can’t turn a pop the circuit. The motor and pump turns free by hand. Any ideas.

• 
  @tracybullock17623 жыл бұрын

  Motor

• 
  @jedimast53 жыл бұрын

  @@tracybullock1762 I checked my start capacitor today. It is a 400 uf. It test at 530. So i will replace. And let you know

• 
  @jedimast53 жыл бұрын

  By the way what was the value of your starting capacitor. Mine is 400. But the parts manual calls for 165

• 
  @RamonMartinez-uk1nt3 жыл бұрын

  is it stll holding good till this day this is the best way i found so far just wandering how its hold up as in 2020

• 
  @Rcarlosrobles13 жыл бұрын

  Omg thank you so much! I've been fighting my compressor for weeks. I replaced pressure switch and switch thinking that was problem. It wasn't, compressor would come on but only build 40 psi then just off over and over, until I found this video

• 
  @irvinhernandez57133 жыл бұрын

  You have the link to where sling and mounts were purchased?

• 
  @tracybullock17623 жыл бұрын

  EBay

• 
  @EVForge3 жыл бұрын

  Thank you for posting!! Fixed the problem. A+++

• 
  @greg61623 жыл бұрын

  They’re nice mice Sig ASP20 Synthetic comes with the QD mounts installed in the stock 👍

• 
  @oscarovalle22894 жыл бұрын

  My exact model dont shut off at 150psi and then the safety valve pops out. So what can it be

• 
  @waynejohnson33884 жыл бұрын

  I’m looking for this on eBay. I’m having no luck finding it. Can you give more information on where to find this sling system? I want to also pit a sling on my air rifle. Thanks eh.

• 
  @waynejohnson33883 жыл бұрын

  I went to Walmart and found a sling and mounts there. Got it set up on my air rifle and it’s mighty slick.

• 
  @Frank-uf2vn4 жыл бұрын

  Awesome camo job even on the scope, I have 3 air rifles, Crosman tr-77 blackout .177, Gamo Hornet Maxxim .22 and a Gamo Swarm fusion 10x and all have a Gamo gun Buddy sling www.amazon.com/Gamo-Buddy-Rifle-Sling-Rifles/dp/B00172KHAS/ref=sr_1_130?crid=1ILPGJLX6BFCG&dchild=1&keywords=177+pellets&qid=1593736719&refinements=p_85%3A2470955011&rnid=2470954011&rps=1&sprefix=.177%2Caps%2C176&sr=8-130

• 
  @tracybullock17624 жыл бұрын

  Thanks Brother

• 
  @tracybullock17624 жыл бұрын

  I am x Navy Scec. Opps.

• 
  @Frank-uf2vn4 жыл бұрын

  @@tracybullock1762 It shows, and thank you so much for your service, much appreciated.

• 
  @OnlyL3G3ND4 жыл бұрын

  Nice video

• 
  @tracybullock17624 жыл бұрын

  Thank you

• 
  @Cameron_J4 жыл бұрын

  I was too lazy to open the cover and wanted to know what was under that plastic shit. Thanks for a video that wasn't full of bullshit and was actually very informative. If something goes wrong with mine, that's the first thing I'll check. However I just want to quiet this God damn thing down before I loose my shit and throw it in the dumpster. I should have purchased an oiled 220v. Thanks for taking the time to make it. Edit: punctuation

• 
  @haircutboys4 жыл бұрын

  Probably the thermal switch is meant to be cable-tied in there so that it's in somewhat contact with what is getting hot. I agree that by letting it float in the air the sensor stays cooler and that "fixes" the symptom of cutting off the motor, but the motor is still getting warm. Whether or not the thermal switch is faulty or has a cutoff which is too low, is unknown. I removed my shroud and added an external fan to keep the motor cool, and that seems to have fixed the problem.

• 
  @martyolson94334 жыл бұрын

  Nice work man! Worked like a charm! I owe u a case of beer!

• 
  @tracybullock17624 жыл бұрын

  COORS LIGHT PLEASE 😁😎

• 
  @tracybullock17624 жыл бұрын

  COORS LIGHT PLEASE 😁😎

• 
  @mikewitte73794 жыл бұрын

  On my 2000 express 4.3 the distributor sensor was intermittent and replacing it fixed the problem. 35.00 after i replaced the EGR Plugs Wires Cap. Just saying its worth changing before the cost gets away from you.

• 
  @immbatman4 жыл бұрын

  Holy crapppppp!!!! Dude I will buy you dinner mannn!!!! It freaking fixed my compressor!!!!!!!! Haha man I was lost, till this video. Thank you so much man!!!! You are seriously a LIFE SAVER. My compressor FINALLY WORKS!!!!

• 
  @tracybullock17624 жыл бұрын

  My Pleasure

• 
  @ltmphotographydesigns5 жыл бұрын

  I have the same compressor. Mine is building up and cutting off but will not cut back on once the pressure in the tank drops. I have to wait like 30 minutes before I can turn the switch back on for it to kick back on. Is this what your was doing?

• 
  @ltmphotographydesigns5 жыл бұрын

  I did what you did and saw all the same signs as you did. Tank only charges to 90psi and that little breaker is hot as fire.

• 
  @tracybullock17625 жыл бұрын

  Yes exactly

• 
  @bilboman15 жыл бұрын

  Love what you did! Can't seem to find the right KeyMod mounts (one that's flat on the bottom) can you link them to me?

• 
  @tracybullock17625 жыл бұрын

  I will try got them and the sling off Ebay. Just had to cut off the one tit on the bottom of the mount.

• 
  @tracybullock17625 жыл бұрын

  Ebay seller is topscalesnmore Tactical quick detach sling.$14.50 for mounts and sling.All key mods have a flat base.all you have to do is cut the tit off the bottom like I said in my video

• 
  @516bass Жыл бұрын

  i dont beleive any of them are flat on the bottom. you will need to grind off the parts that stick up. not to difficult.

• 
  @abw1215 жыл бұрын

  I just found your video, Thank You. Did you cut out and bypass this heat switch or just pull it away from the motor windings? Just clean a ton of dust out of motor on my dads compressor. It would only get up to 50 psi and then shut down. After shutting switch off for about a minute we switch it on again and it runs for less time and shuts off. Again Thank you

• 
  @tracybullock17625 жыл бұрын

  I ended up just removing it.Still runs like new to this day.

• 
  @jeffguia73715 жыл бұрын

  I’m having same problem with my 20G I’ll check it out.