Пікірлер

• 
  @techtraveler44212 күн бұрын

  Safety gear and flip flops. You've got my vote! Great video and review, thanks. I think I'm decided on this model.

• 
  @Jim-fd3ri3 күн бұрын

  Easy to follow.. Learned that the entire sensor is done by feel. Took about an hour.. Mostly just trying to align the screw back up to the hole.

• 
  @dudleydorite76784 күн бұрын

  How has it held up

• 
  @bigdaddysshop81808 күн бұрын

  I couldn't hear my pump. I thought something was wrong.

• 
  @Tyrone-db8mo8 күн бұрын

  thanks for this. needed to see how raptor cut overgrown grass.

• 
  @luiso682711 күн бұрын

  Great video, clear voice, and great explanation. The idea of using a drawing board it genius I’ll definitely be using that. New subscriber here keep it up!

• 
  @michaelhembree416712 күн бұрын

  i perfer old school cant stand belt drive ..to much of a hastle

• 
  @oalmikee123412 күн бұрын

  Did a great job. Thanks again for all your help. 😊

• 
  @AuzzAustin13 күн бұрын

  Appreciate it a lot, sir mine was litterly cracking on its last hour and just in time i changed it

• 
  @Damien_Nicholas15 күн бұрын

  Im in the process of gutting the entire interior... Boxing on the inside of the exterior walls all have termite damage. Sill plates and rim joists are rotted. All windows and doors are shot. Limestone block foundation isn't terrible, but is being repointed. New everything, inside and out...

• 
  @thedwaynerailfans17 күн бұрын

  i have a ford f150 2020 with a 12v cig plug and a 110v ac 400w max outlet. im tryinf to figure out how to plug a 6gal air compressor thats 120v with 10amps for an air tank. would a 1500w inverter work in this case or would that burn a fuse or battery

• 
  @davidshale183619 күн бұрын

  cant get s used one with delete dafe

• 
  @PedroPlckle20 күн бұрын

  So just one question... did it work?! Did it stop drinking the black stuff?

• 
  @77karimk20 күн бұрын

  I have a 2011 Mercedes Gl350 likethe one you had andinstalled a catch can but that caused me to loose the engine : let me explain , live in Ottawa region and on a very cold day ( -40C ) an ice plug formed in the catch can piping and crank case pressure went to hell and the engine spilled all of it's oil after it busted the piping and engine locked up 7000Cad later replaced the engine and had to reconnect the dam PCV back , but what i'm doing is simply splitting the recommanded oil change intervals by half so changing oil every 7500Km instead of 15k

• 
  @Bubba-wx7lp20 күн бұрын

  You should have used a new O ring seal on cooler. Old one has swelled.Why put old junk back in??

• 
  @leavingasap84321 күн бұрын

  I Thought You had to spray clear while paint wasn’t fully dryed

• 
  @josuegutierrez330324 күн бұрын

  Y have a garden wich is mostly clay, have grown quite about anything in it and have gotten great results, mostly beans wich have grown very good!

• 
  @ClappOnUpp24 күн бұрын

  150a?? Dude yeah that's way too big for your circuit protection

• 
  @LynxStarAuto25 күн бұрын

  I would think you need at least a 5k watt inverter to run a microwave without issues. 1500 would go into protect mode which would be very annoying.

• 
  @TheBrabs00726 күн бұрын

  I bought the tools from eBay for £14.00

• 
  @AyobamiIlori-h6g26 күн бұрын

  How do i identify the tensioneer please?

• 
  @ryanfountain114126 күн бұрын

  Stopped watching 5 min in once I realized you guys are working in flip flops

• 
  @lennyray4227 күн бұрын

  I’ve never filled my filters up with oil either. Never had any problems with any of my vehicles n my 08 gmc durmax has over 200K miles…

• 
  @GilbertGardens27 күн бұрын

  i know eh. still doing mine like this

• 
  @truth774728 күн бұрын

  Thanks for video! Appreciate the information!

• 
  @TODDSIMON-xu6qfАй бұрын

  So Hustler has admitted they have an issue with the frame design. They sell (but should offer for free ) a beefed up bracket kit to keep the frame from flexing. That's why his mounting bracket is cracked. When that flexing occurs the drive belt fans hit the drive belt , which breaks or derails the belt .

• 
  @GilbertGardensАй бұрын

  @@TODDSIMON-xu6qf yes I've touched on that. Complete BS

• 
  @xudesign2430Ай бұрын

  Helpful content, thanks!

• 
  @RehdClouhdАй бұрын

  I appreciate your video! Thanks for posting! A tip: got a good jump scare at 11:05 I had the volume adjusted for your talking then BAM loud engine running.

• 
  @GilbertGardensАй бұрын

  @RehdClouhd my apologies next time I'll clip it better. Rip ears

• 
  @uglykillerАй бұрын

  Thank you for this video u da man. U still got the bike?

• 
  @JaskaranSingh-lr6ncАй бұрын

  Hey bro i bought 2015 Ecodiesel at 192000. Serviced it yesterday after 5K. Can u pls let me know the things to check on to run smoothly. I would really appreciate ur time.

• 
  @user-te7dc8mi7hАй бұрын

  Hi i just found your video on the 2011 compass and i have a 2012. I have some other things that need to be worked on but nobody seems to know where to find this part. Since you could deal with a compass that is identical to mine, I was thinking you may know the answer or at least be able to lead me to your resource that would have the answer. I'm getting a bad read on a fan motor relay and everybody keeps pointing me to the fuse box, but it's an actual big giant chunky relay and nobody can seem to figure out where it is and so only one of my fans is working and the other one doesn't. My thought was that the relay is on the back of each fan that I cannot find a resource to give me the correct answer. And since you actually have a compass that you work on all the time, I felt you were a good source to ask and hoping that you have the time to answer or or send me a link to the video that you've made that covers the information.lol. I guess I want to know how do I find more of your Jeep compass repair videos not just this one. Or do you guys have a family email that I can email you More questions? Thank you in advance for your hopefully coming response😊

• 
  @waynesanders1406Ай бұрын

  You can get cable glands to put at the entry point through the body, that's what I did. It's a little plastic tunnel that inserts through a hole with threads, then you tighten down the nut on the opposing side to lock it to the metal wall. Then it has another larger nut on the exterior side that you tighten down after the cable is in place and it shortens/tightens down a rubber grommet to water seal the wiring through the wall. I highly recommend. They come in various sizes, I used a bunch of number 10 gauge wires from Lowes instead of a solid single cable, it was just easier to route and deal with with the way I ran it through the firewall in the kick panel area. WI think I used PG 19 or PG22 size. 4x 10 gauges on the positive and another set on the negative.

• 
  @daleolson3506Ай бұрын

  The music junked another video 👎👎👎💩💩💩😬unbelievable this crap over the tractor?

• 
  @tcmits3699Ай бұрын

  A piece of worn out T-shirt pressed between socket and nut or bolt head works great for retaining nuts or bolts so they don't fall out, especially SS non-magnetic fasteners. Thank for sharing, was going to come up from underneath 😊

• 
  @mattbrew11Ай бұрын

  My 3rd gen is performing flawlessly so far with a + 80hp tune, catch can, oil cooler and amsoil coolant/oils so far. I dont tow with it but it does push 42” tires around doing crazy offroading ~ 70% of its miles in my Gladiator. I’ve appreciated learning insights from you im sad to see it go

• 
  @neila.4289Ай бұрын

  Yes…The never ending “ maintenance “ is astounding with it. Sub par engineering.

• 
  @tschwenk0322Ай бұрын

  Great video thank you! Dealer wanted $175 🤯

• 
  @tinamagnuson2Ай бұрын

  My 104 year old CT beach cottage is balloon framed. I'd have never bought it had I know. The back wall where a back porch was turned into a two story addition back before no doubt permits were required is bowed outward and the roof dips towards the main roof and splays outward as well, due to lack of proper reinforcement. I doubt where the outside wall of the porch was removed to make it an inside part of the dining room is properly supported either as the bedroom above has a floor that dips badly. I had a turnbuckle installed in the attic to keep the roof from splaying any further. I wish you wanted a beach holiday and could come fix my house!

• 
  @GilbertGardensАй бұрын

  Maybe you can get underneath and get some footings in to help the structure. No doubt it's all sagged down. Best of luck keep us posted

• 
  @marcusguajrdo73Ай бұрын

  Great video !!!!!

• 
  @patrickwears229Ай бұрын

  Unsure why this video took 5 minutes

• 
  @GilbertGardensАй бұрын

  2 times speed helps

• 
  @holden8277Ай бұрын

  Spacers only removed if you have a trailer then the lock down tabs replace the spacers

• 
  @user-fp8xo4oo6fАй бұрын

  Is this with air conditioning?

• 
  @neonknight7673Ай бұрын

  Thanks for the video! It helped me replace the belt for my dad :D

• 
  @GilbertGardensАй бұрын

  Glad I could help. Loved that little mower.

• 
  @GENX80.Ай бұрын

  Tip if gonna bleed brakes anyway take calipers off completely easier to work on a table js

• 
  @GilbertGardensАй бұрын

  Yes makes total sense.

• 
  @kerensahaney5622Ай бұрын

  Thank you, I was able to change my own filter. Dealer was supposed to check it but did not.

• 
  @GilbertGardensАй бұрын

  Np glad it helped

• 
  @chrisspencer2428Ай бұрын

  also you look very familiar lol

• 
  @GilbertGardensАй бұрын

  Glad it helped. Oh yeah I have one of those faces hahaahah

• 
  @chrisspencer2428Ай бұрын

  your video helped me so much thank you so much from Hamilton Ontario

• 
  @dtaposse8858Ай бұрын

  Great video sir,are those safety shoes ur wearing

• 
  @GilbertGardensАй бұрын

  bhahahaha you betcha

• 
  @CORNPOP242 ай бұрын

  The tap should have been taken out first then the pan. What a horrible mess.

• 
  @Sncedayone2 ай бұрын

  Scratch the paint off on any ground to bare metal. Use sand paper or wire brush

• 
  @southbridgeforestHOA2 ай бұрын

  i had some problem,, weeds just kept on growing through them.

• 
  @GilbertGardens2 ай бұрын

  yep over time. ive had good success with fabric and asphalt millings now lol