Hi, i had this problem when i first got mine. I didn’t try email them until now so they wont send me a replacement 😞
@Splat-pp1rk4 жыл бұрын
Not to be rude but is your 4 year old son running the camera?
@royalhoneyamerica4 жыл бұрын
Bro I bought one for my daughters and i wish i would have bought the regular one. DO NOT BUY THE 3DOODLER START! IT WILL JAM within 10 uses. I PROMISE YOU THAT. Then i had to return it and get a replacement which is not worth it. Just get the more expensive one that comes with a rod to clear a jam.
@vinayfloyd4 жыл бұрын
Hey Mike, what is the purpose of this video if the pen does not work and you are not able to make it work. Its 7 minutes of wasted time.
@qasimhashmi81484 жыл бұрын
How you did it ? That's awesome How to change Prius Plus Horn ? Because Factory Fitted Are Bunch of Shit. Could you make video to install VW or BMW Horn in Prius Plus Thanks
@necrokittie22914 жыл бұрын
i fixed it, mine was the same way. i got it from goodwill for 2 dollars. because of another comment i adjusted the heat all the way up. i just used the included screwdriver to stick into the tiny hole next to the hi lo off switch. i turned it clockwise until it was fully turned. i had to give it a small bit of encouragement by pushing on the filament because i figured if the motor has been going for awhile, it might of ground down the filament so it won't have the friction anymore to move the filament thru on just that small spot where the gears had been moving. once i did this. it just took over and started working correctly. =^-^=
@sjh00105 жыл бұрын
Mines doing this too. I think the hole in the tip needs to be slightly bigger so it's easier for the shit to come out. Frustrating
@royalhoneyamerica4 жыл бұрын
In 2019 and STILL THIS COMPNAY IS SCAMMING PPL
@nutmeg4185 жыл бұрын
Wow I only got to try my pen out one time and then I guess I was discouraged too long. Didn't pick it up again until today and now this... So disappointed 😔
@necrokittie22914 жыл бұрын
i fixed mine by turning the heat up with the small screw driver in the hole next to the hi lo off button, i turned it clockwise. it got hotter and the filament was more more liquidy so the motor was strong enough to push every thing thru once i gave it a bit of encouragement by pushing on the back of the filament.
@MarTube20055 жыл бұрын
I HAVE THE SAME PROBLEM AND HAVE TO BUY A NEW ONE, DAMN MONEY-SUCKING COMPANY.
@yanwang64555 жыл бұрын
I know how to solve this problem. Read the instructions and turn up the temperature with a small tool it comes with. We had the same problem but we fixed it by turning the heat up with the smallest tool. It is in the instruction manual.
@necrokittie22914 жыл бұрын
worked for me too
@zugzug20065 жыл бұрын
i also have the same problem with my pen.
@RandomStuff0095 жыл бұрын
using 3doodler create - same shit here, wasted 100 bucks
@douaaelrayes90435 жыл бұрын
It's been 2 years since I bought it and I realised this problem was present. I just saw this video and realised that this problem happens to many other people. Is it too late now to contact the sellers to ask for a replacement or is it still okay?
@betepbou97234 жыл бұрын
It's exactly the same story with me. Did you manage to get a replacement?
@bonnydmytriew75016 жыл бұрын
like Mike
@Jay-ml1yf6 жыл бұрын
The same thing happened to me, but I can't even pull my plastic out of the pen.
@The3doodler6 жыл бұрын
Hi there, We are sorry to hear about the issues you have had with your 3Doodler. We are also happy that you got an updated pen! If you ever experience any further issues, feel free to reach out to us at [email protected]. We have since updated the location which we ship pens out from, as well as the pen itself.
@necrokittie22914 жыл бұрын
why are you being dumb and not telling people to turn their heat up? it's obvious that too cold filament won't flow well. i had this problem and fixed it myself with the screwdriver.
@lukashruza85707 жыл бұрын
I have the same problem.
@AlexCio7 жыл бұрын
I have the same problem with my one! It looks like it doesn't grab the plastic correctly or it the plastic just clogs inside the pen.... But I had this problem from the beginning and I didn't knew it is a problem of the pen, just thought I use it the wrong way! Don't think they would give me a new pen....
@betepbou97234 жыл бұрын
It's exactly the same story with me. Did you manage to get a replacement?
@patrickhess87887 жыл бұрын
low is for abs filament hi is for pca filament
@dasaiyan44797 жыл бұрын
mine has the same problems
@m.dsuperhexgaming47657 жыл бұрын
just take plastic and put it inside and force the plastic by pushing it and make sure its 100% fuly charge
@lecxychen19637 жыл бұрын
Did you even read the instructions?!?! You where supposed to turn the light on due to the type of plastic and keep on pushing the plastic in until you feel the gear inside be able to pull it in without any help.
@ukulinnap50767 жыл бұрын
Same problem
@necrokittie22914 жыл бұрын
i fixed mine by turning the heat up with the small screw driver in the hole next to the hi lo off button, i turned it clockwise. it got hotter and the filament was more more liquidy so the motor was strong enough to push every thing thru once i gave it a bit of encouragement by pushing on the back of the filament. 43333
@julenioreinoso76137 жыл бұрын
mabey if u read the instructions duhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
@julenioreinoso76137 жыл бұрын
u suck
@bub44427 жыл бұрын
cuz you were on abs and a pla strand don't telll me I'm stupid I'm smart
@gracesiguenza2247 жыл бұрын
The same thing is happening to me and I'm really disappointed because it was a lot of money
@fabulousfab70807 жыл бұрын
I have the same problem as you. do you know how to fix it
@jennifergor.74007 жыл бұрын
I have the same problem and I can't find any videos to help me, I once spent about an hour trying to figure out what's wrong. Worst part only got to use it for 5 minutes until it just stopped
@hannahpawsome83707 жыл бұрын
mines tip broke
@trexinvert7 жыл бұрын
Same happened to my kids. Problem is the device is not pure injection molding(screw/auger drive). It pushes rigid rod(when cold) into the heated nozzle, but when rod reaches the end there's no length for the pinch/roller drive to push. Thus, molten glob. Two possible solutions: 1.) Blow through the back(not recommended) to push the molten material. 2.) Find a steel rod that will fit and drive it thru the pen. Good luck. Keep on.
@andrewkerley66507 жыл бұрын
I got one for Christmas and it stopped working after a few days😢😭😪
@isthatevenpossible76458 жыл бұрын
The same thing is happening to mine how do you fix it
@mihaelahatch44908 жыл бұрын
that thing didn't do shit for me
@user-qf6er1fc7f8 жыл бұрын
Inbox the 3doodler create
@stinew3588 жыл бұрын
My take on these issues is that the product seems to be some kind of beta where they only added the bare minimum number of controls (maybe they wanted it to look sleek?) to address the very complex issue of melt temperature for plastics or resins. Every color is going to melt at a different temperature and the lack of custom temperature verification (your only control is a little screwdriver that has no feedback to tell if you are even moving the gauge or what it is set to) means that there is no way to test and make sure your extruder will melt at the perfect temperature for designing objects. This sets many users up to fail because too hot and it will extrude liquidy and fast and too slow/cool and it will clog perpetually. (I guess they wanted something to improve on? they didnt want the product to be too good or no one would buy the 3.0? or 2.0 DELUXE who knows)
@sonia58178 жыл бұрын
the motor wont pull it in cut the plasric at an angle. i had the same problem with the 3doodler 2.0 and it worked for me but if that dosent work for you in the box it should come with some fixing tools look at the instructions and youll be away in no time!!
@yvonneyy33138 жыл бұрын
Mine have the same problem as you . ! not sure if they will give me an replacement
@ayyitsjan83398 жыл бұрын
Your all doing all WRONG! To do it you need to 1.Plug in the 3doodler2.0 2.Instert strand. ABS High 3.Press The big or small button. PLA slow
@walterhynson28988 жыл бұрын
mine quit completly
@Janscreatons8 жыл бұрын
Just bought one from Michaels. It won't work either and is going back.
@lanageertse69298 жыл бұрын
hold fast for 30 seconds with a New strand the instructions say that
@drallesklar1208 жыл бұрын
hey guys, if you have the same problem how he has and me too, you can fix it. all you need to do is put your nozzle down ;) but! the 3doodler must be turned on when you put of the nozzle! i hope i can help a few people with this;) the problem at this , is the engine, the engine isnt strong enough for squezing this 3.0 mm plastic out of the little nozzle ;) i realy hope i helped you a lot with this ;8
@mauc97248 жыл бұрын
+Mike VanDam where that you buy?
@romeosmith76398 жыл бұрын
Before using it, you need to let it sit there for about 35 seconds for it to heat up. Make sure to be gentle with the pen. Remember, it's not made of the hardest solid in the world which is actually diamond. That's probably why you had problems. Also it was most likely a jam in the pen. Read the instructions which will tell you how to deal with jamming in the pen or just look it up on KZread or Google.
@Noevamber8 жыл бұрын
Me too
@crazystuffking35328 жыл бұрын
So my pen is the best because I had no
@crazystuffking35328 жыл бұрын
Problem
@toxicgun18208 жыл бұрын
Our 3Doodler is garbage, It clogs ALL the time, we can never seem to get it to work.
@tuffstuff14338 жыл бұрын
Me neither!! It sucks :(
@emme37348 жыл бұрын
I had the same problem with my pen. I do not want to pay another $100 for it so I tried many different strategies to get pla to work. WHAT I FOUND WAS PLA DOES WORK IF YOU PUT IT ON HIGH. SO I RECOMEND YOU NOT BUY A NEW PEN. IT WOULD BE A WASTE OF FNAF MONEY.
Пікірлер
Hi, i had this problem when i first got mine. I didn’t try email them until now so they wont send me a replacement 😞
Not to be rude but is your 4 year old son running the camera?
Bro I bought one for my daughters and i wish i would have bought the regular one. DO NOT BUY THE 3DOODLER START! IT WILL JAM within 10 uses. I PROMISE YOU THAT. Then i had to return it and get a replacement which is not worth it. Just get the more expensive one that comes with a rod to clear a jam.
Hey Mike, what is the purpose of this video if the pen does not work and you are not able to make it work. Its 7 minutes of wasted time.
How you did it ? That's awesome How to change Prius Plus Horn ? Because Factory Fitted Are Bunch of Shit. Could you make video to install VW or BMW Horn in Prius Plus Thanks
i fixed it, mine was the same way. i got it from goodwill for 2 dollars. because of another comment i adjusted the heat all the way up. i just used the included screwdriver to stick into the tiny hole next to the hi lo off switch. i turned it clockwise until it was fully turned. i had to give it a small bit of encouragement by pushing on the filament because i figured if the motor has been going for awhile, it might of ground down the filament so it won't have the friction anymore to move the filament thru on just that small spot where the gears had been moving. once i did this. it just took over and started working correctly. =^-^=
Mines doing this too. I think the hole in the tip needs to be slightly bigger so it's easier for the shit to come out. Frustrating
In 2019 and STILL THIS COMPNAY IS SCAMMING PPL
Wow I only got to try my pen out one time and then I guess I was discouraged too long. Didn't pick it up again until today and now this... So disappointed 😔
i fixed mine by turning the heat up with the small screw driver in the hole next to the hi lo off button, i turned it clockwise. it got hotter and the filament was more more liquidy so the motor was strong enough to push every thing thru once i gave it a bit of encouragement by pushing on the back of the filament.
I HAVE THE SAME PROBLEM AND HAVE TO BUY A NEW ONE, DAMN MONEY-SUCKING COMPANY.
I know how to solve this problem. Read the instructions and turn up the temperature with a small tool it comes with. We had the same problem but we fixed it by turning the heat up with the smallest tool. It is in the instruction manual.
worked for me too
i also have the same problem with my pen.
using 3doodler create - same shit here, wasted 100 bucks
It's been 2 years since I bought it and I realised this problem was present. I just saw this video and realised that this problem happens to many other people. Is it too late now to contact the sellers to ask for a replacement or is it still okay?
It's exactly the same story with me. Did you manage to get a replacement?
like Mike
The same thing happened to me, but I can't even pull my plastic out of the pen.
Hi there, We are sorry to hear about the issues you have had with your 3Doodler. We are also happy that you got an updated pen! If you ever experience any further issues, feel free to reach out to us at [email protected]. We have since updated the location which we ship pens out from, as well as the pen itself.
why are you being dumb and not telling people to turn their heat up? it's obvious that too cold filament won't flow well. i had this problem and fixed it myself with the screwdriver.
I have the same problem.
I have the same problem with my one! It looks like it doesn't grab the plastic correctly or it the plastic just clogs inside the pen.... But I had this problem from the beginning and I didn't knew it is a problem of the pen, just thought I use it the wrong way! Don't think they would give me a new pen....
It's exactly the same story with me. Did you manage to get a replacement?
low is for abs filament hi is for pca filament
mine has the same problems
just take plastic and put it inside and force the plastic by pushing it and make sure its 100% fuly charge
Did you even read the instructions?!?! You where supposed to turn the light on due to the type of plastic and keep on pushing the plastic in until you feel the gear inside be able to pull it in without any help.
Same problem
i fixed mine by turning the heat up with the small screw driver in the hole next to the hi lo off button, i turned it clockwise. it got hotter and the filament was more more liquidy so the motor was strong enough to push every thing thru once i gave it a bit of encouragement by pushing on the back of the filament. 43333
mabey if u read the instructions duhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
u suck
cuz you were on abs and a pla strand don't telll me I'm stupid I'm smart
The same thing is happening to me and I'm really disappointed because it was a lot of money
I have the same problem as you. do you know how to fix it
I have the same problem and I can't find any videos to help me, I once spent about an hour trying to figure out what's wrong. Worst part only got to use it for 5 minutes until it just stopped
mines tip broke
Same happened to my kids. Problem is the device is not pure injection molding(screw/auger drive). It pushes rigid rod(when cold) into the heated nozzle, but when rod reaches the end there's no length for the pinch/roller drive to push. Thus, molten glob. Two possible solutions: 1.) Blow through the back(not recommended) to push the molten material. 2.) Find a steel rod that will fit and drive it thru the pen. Good luck. Keep on.
I got one for Christmas and it stopped working after a few days😢😭😪
The same thing is happening to mine how do you fix it
that thing didn't do shit for me
Inbox the 3doodler create
My take on these issues is that the product seems to be some kind of beta where they only added the bare minimum number of controls (maybe they wanted it to look sleek?) to address the very complex issue of melt temperature for plastics or resins. Every color is going to melt at a different temperature and the lack of custom temperature verification (your only control is a little screwdriver that has no feedback to tell if you are even moving the gauge or what it is set to) means that there is no way to test and make sure your extruder will melt at the perfect temperature for designing objects. This sets many users up to fail because too hot and it will extrude liquidy and fast and too slow/cool and it will clog perpetually. (I guess they wanted something to improve on? they didnt want the product to be too good or no one would buy the 3.0? or 2.0 DELUXE who knows)
the motor wont pull it in cut the plasric at an angle. i had the same problem with the 3doodler 2.0 and it worked for me but if that dosent work for you in the box it should come with some fixing tools look at the instructions and youll be away in no time!!
Mine have the same problem as you . ! not sure if they will give me an replacement
Your all doing all WRONG! To do it you need to 1.Plug in the 3doodler2.0 2.Instert strand. ABS High 3.Press The big or small button. PLA slow
mine quit completly
Just bought one from Michaels. It won't work either and is going back.
hold fast for 30 seconds with a New strand the instructions say that
hey guys, if you have the same problem how he has and me too, you can fix it. all you need to do is put your nozzle down ;) but! the 3doodler must be turned on when you put of the nozzle! i hope i can help a few people with this;) the problem at this , is the engine, the engine isnt strong enough for squezing this 3.0 mm plastic out of the little nozzle ;) i realy hope i helped you a lot with this ;8
+Mike VanDam where that you buy?
Before using it, you need to let it sit there for about 35 seconds for it to heat up. Make sure to be gentle with the pen. Remember, it's not made of the hardest solid in the world which is actually diamond. That's probably why you had problems. Also it was most likely a jam in the pen. Read the instructions which will tell you how to deal with jamming in the pen or just look it up on KZread or Google.
Me too
So my pen is the best because I had no
Problem
Our 3Doodler is garbage, It clogs ALL the time, we can never seem to get it to work.
Me neither!! It sucks :(
I had the same problem with my pen. I do not want to pay another $100 for it so I tried many different strategies to get pla to work. WHAT I FOUND WAS PLA DOES WORK IF YOU PUT IT ON HIGH. SO I RECOMEND YOU NOT BUY A NEW PEN. IT WOULD BE A WASTE OF FNAF MONEY.
I Think You cut the tip off the plastic