Пікірлер

• 
  @Marie-yx5ie3 күн бұрын

  Thank you 👍😉🇨🇮☘️Eire

• 
  @daverule82674 күн бұрын

  I just come across your video,thanks alot,,,ive got exactly the same problem wirh our 2017elddis with the same rooflight,such a poor design,i took the rooflight out an resealed it as i thought it was that but then i realised the roof was sagging so much,i think im gonna try an tackle the job the same as you done Thanks again for the video Cheers Dave

• 
  @PJANGELES305 күн бұрын

  good job

• 
  @tarasostapenko979712 күн бұрын

  Hello Sir. How many km/miles war with this engine?

• 
  @NaZReD18 күн бұрын

  same type of issue but mine is coming in from under the floor😅

• 
  @mihaigirghescu36125 күн бұрын

  THANK YOU! I HAVE THE SAME PROBLEM AND I HOPE TO SOLVED IT .🙂

• 
  @almirsuljic110829 күн бұрын

  A buy this and i agree with you 100% I im on way to change shit 😢

• 
  @adamshepherd5171Ай бұрын

  Decent information, just did the same thing on a 100 series LandCruiser diesel. Had to align the tab the opposite direction to the motor though

• 
  @lukabilic6081Ай бұрын

  Are there any aftermarket parts for more durable timing chains or kits which do not use plastic?

• 
  @Sup3rBald73Ай бұрын

  Solved the problem on mine taking out the filter and cleaning it, only problem is the white plastic connector is split and screen wash leaks when using rear wiper, I have managed to order a right angled oem connector to replace it, fingers crossed it fits ok.

• 
  @mazdaman1286Ай бұрын

  in the 90's I had serveral PSA 1.9 td PSA engines that ran reliably into the 100's of thousands of miles . The same can be said for the 2.0 HDi. A competitor had VW 1.9 Tdi's which likewise just ran. Another company I knew of had Toyota HiAce vans with the D4D engine in them . These vans racked up stella mileages , they never stopped!! fueling and servicing only . The owner would only have these vans.... What has gone wrong ??? JLR engines are just crap. BMW snapping and jumping chains. Vauxhall the same . Guides made out of cheese.. Chains in a place where it is a complete strip down...AND they have become a service part ! What happened to Duplex chains and tensioners with a toothed sprocket bathed in oil that lasted the life of the vehicle ? The caliber of the engineers must be called into question because failures of this kind can no longer be tollerated on a " prestige vehicle "...Their trade in value is almost nothing. would these companies be happy if they were making aircraft components and flying over the Atlantic.? Next they will be fitting wet belts to them. ...and none of this came to light in extensive testing ? Oh yes but by then the warranty would have expired......

• 
  @alexescobar6131Ай бұрын

  Hello good video. My roof works to open but when i close it wont. It closes front and back wont go up to let the liftgate go down. Any idea? I fixed a broken wire on the pass side arm but nothing changed

• 
  @raylivaldez5564Ай бұрын

  where did u buy the kit, i want one but i cant find any

• 
  @user-dj8mh7wy2gАй бұрын

  اميرا Central locking, rear wipers and fuel pump are connected to each other Peugeot

• 
  @reinhardtgroenewald6791Ай бұрын

  Can anyone give the torque values for the tightening of the cam caps

• 
  @davidcarruthers90042 ай бұрын

  Thank you for this as I’ve just did mine the rubber filter was blocked and sludge in bottom of bottle also I fixed the back one as it had popped a connector just behind back tail light …happy days 👍

• 
  @markhiggins30542 ай бұрын

  Thanks heaps - so if you wanted a higher vehicle - you would simply wind those two bolts more than the 60mm you had? Many thanks in advance.

• 
  @philsimpson35562 ай бұрын

  Good video, and of partial help to me. I've been searching for information on changeing/checking CVT fluid on a Micra K14 2020. Can't find much info anywhere. The fill plug is in a ridiculous position and not a dipstick. They have made it so difficult for an owner to do this work probably so you have to go to a dealer. I had some damage to my hoses (not corrosion, probably a large stone) and they were changed by the dealer but I can't tell whether the fluid is at the correct level. I have since fitted a grill at the front to stop this happening again.

• 
  @jamiesweets13812 ай бұрын

  Thanks for such a detailed informative video!

• 
  @SKILLSHOOTER212 ай бұрын

  great video and knowledge thanks for the help

• 
  @kiefercopp2 ай бұрын

  amazing video, thanks a lot! Quick question, do you know what these sensors are called please, specifically the one you have shown in your video that detects when the storage box has been lowered. I'm getting a "soft top storage box not lowered, remove obstacles" error, even though the storage box is/has lowered

• 
  @TheUltimate652 ай бұрын

  Its not all time this go easy, somtimes the axle rusted in the spline into the bearing , But you was lykey then...👍👍👍

• 
  @smurfiennes2 ай бұрын

  My front windscreen washer don’t work, but the back does. So the pump isn’t the problem then. They were working then, and then they stopped. They must be blocked somewhere.. Do you have any idea where?

• 
  @ericmgoddard2 ай бұрын

  I have a Sportbrake with exactly the same issue. Electrics doing all sorts of things. I could start the car from the lock button :(. Great help, and I will have the windscreen removed and replaced in the hope I have the same problem. Thanks again

• 
  @leonperry1232 ай бұрын

  thanks. this is a job i have to investigate. mine the same problem.

• 
  @kevinhaigh39622 ай бұрын

  Hi there, hope you can give me any advice please, I have changed my steering wheel over for a carbon fibre one, and it is basically a vauxhall insignia steering wheel refurbished, when I connect it all up the switches all working no problem because all original parts from my steering wheel but when I put the air bag back on the horn is on permanent I have had to take out the fuse, would you have any idea what is wrong please

• 
  @foadayoubian2 ай бұрын

  is this same tool with petrol?

• 
  @balsreview2 ай бұрын

  That hydraulic pump unit look exactly like the BMW Z4.

• 
  @Chubby7133 ай бұрын

  Thanks. Looks identical set up as 1998 Toyota Granvia. ( Japanese import )

• 
  @canuckfixit77223 ай бұрын

  With the "breakaway" force of just over 6T, this video clearly demonstrates that you need a 12T press for replacing bearings on front drive vehicles. Installing the bearings can be done with a 6T press since all the surfaces will be clean and lubricated.

• 
  @trusselldavis25463 ай бұрын

  I need your help

• 
  @howyjones67973 ай бұрын

  Does any one know colour wire for fog lights estate 2012

• 
  @Trevs-Shed3 ай бұрын

  Having watched both videos it seems you have the same layout as our Lunar lexon 640. You mention the build is from inside to outside so exactly how did you get all those screws out if they are inaccessible? Did the roof sheet and the trim strips just have to be broken out and then all replaced? Where did you get the replacement roof and wall sheets from? Any assistance you can offer will be very much appreciated. regards Trevor

• 
  @jasonwoodward-kc4cp4 ай бұрын

  How much does that cost.to fix been looking at buying and seems to have the same fault

• 
  @bartolo7154 ай бұрын

  Good video

• 
  @georgef11764 ай бұрын

  Apparently there is a way to bypass and be able to j2534 a bunch more vehicles. It’s only on the pad7 and I’m not sure outside of USA but launch (not launch USA)? Launch global can give IP information and you have too write the code into the system. This is what launch just told me on the phone. Now launch USA won’t give me the information only launch global. And they both tell me not to deal with the other!!! Wtf. I’m seriously pulling my hair out just to pick a unit. At this point I’m gonna buy the new launch pro3 ace and a used snap-on and then get separate j2534 boxes used as I need them, it’s crazy. There is not a real one and done scanner on the market.

• 
  @tonyday21474 ай бұрын

  Hi do you fancy doing again i have the same problem and identical caravan not sure i could take it on myself

• 
  @Trevs-Shed3 ай бұрын

  Is yours a Lunar 640 or similar, like the one I have this issue with? I am going to have to tackle it myself.

• 
  @user-vs8ld5di7j4 ай бұрын

  Keep the head up lad👍👍👍

• 
  @tunnel74 ай бұрын

  Good ole Land Rover disgraceful

• 
  @user-dr8rw1nz4h5 ай бұрын

  Don't understand why someone ho don't understand diagnostic toll actually doing reviews....don't know anything about that tool and what is the capability of it....that launch is one of the best scanner on the market

• 
  @naeemn455 ай бұрын

  Hi, Was the head removed without pulling engine out?

• 
  @flincher96335 ай бұрын

  Thanks for this video I have a 1999 hilux that I did the same thing took the linkage to the motor off but thanks to ur video it’s the same with hilux 😂

• 
  @stevenhensman25415 ай бұрын

  Hi my friend can go blokes glow plug snap easy

• 
  @benz-tek94165 ай бұрын

  Have your tried online SCN coding for Mercedes?

• 
  @darekz97775 ай бұрын

  Hi, do you still have your Launch Pad 7? How is it till now? In the video you've posted, you wasn't impressed with it. I'm just wonder if updates improved it? There is no proper video reviews about it, but there is good few positive feedback on internet about this tool, so I'm bit confused. The other people who bought it, say it's a great scanner for the money, with so many functions which all works perfect, incl. online coding and programing(BMW, Merc)??? Can you please replay.

• 
  @smithandjohns4 ай бұрын

  Hi, I would also like to know please?

• 
  @nsoper195 ай бұрын

  how tight do the bolts need to be on the feet bits at either end? It seems like it is just the torque of the bolts which holds it steady there?

• 
  @bogie1706 ай бұрын

  Why do they use plastic parts in an engine?????

• 
  @naeemn456 ай бұрын

  Hi, Did you have to pull the engine out to do the valve job? Got a qashqai 2015 model with 1.2 petrol turbo engine. Would you know if head removal can be doen without removing engine from car? Thanks

• 
  @andrewwright30306 ай бұрын

  This is a great video for what I'm doing. Same problem, same engine, same cylinder but it's in a Renault. At the end, what did you find after the timing chain diagnosis etc, was there bent valves or damage piston. Did you get the head overhauled ?, or just did the chain and all was good.

• 
  @wojtekkaminski85416 ай бұрын

  Avoid. ASIAN MARKET NOT SUPPORT EUROPEAN CARS