Пікірлер

• 
  @rahimsaafir9423Ай бұрын

  Great video

• 
  @HARSHMPATELАй бұрын

  All of my screws were t15 Instead of t20 . But my car is pre owned so someone may have work on it in past. But everything else was spot on . Thanks it saved me money on labor.

• 
  @mr.s96682 ай бұрын

  Thanks for the video! It really helped me out today.

• 
  @tury052 ай бұрын

  Que medida es el dado?

• 
  @forestrowleyjr81182 ай бұрын

  Thank you! Excellent instructions made the job so easy! Good job young man!

• 
  @johnbaxter853 ай бұрын

  Great video, thank you.

• 
  @mechmany2k3 ай бұрын

  Watching this video made the replacement of my 2010 fusion passenger side mirrior a snap... ex peexy. Thanks! 😀

• 
  @dday93714 ай бұрын

  Mine will start easy then run about 20 seconds and die

• 
  @martinrea85484 ай бұрын

  So how often should you change this piece? Every time you put new plugs in? Or is it a case of if it ain't broken don't fix it? I have a new one here but don't know should I put it on my little Honda 90. Would it improve performance if I put it on? Thanks 🏍👍

• 
  @potholetheband64756 ай бұрын

  Well, you showed every step of the process.... except how to put the cap on to the wire!

• 
  @melly81437 ай бұрын

  video was very user friendly. I was about to send it back, because I thought it was going to be difficult to apply. Thanks to you it was a breeze.👏

• 
  @ronbang7 ай бұрын

  Dont you have to tie the yellow and black wires together??? Pretty sure you do.

• 
  @bab2member8 ай бұрын

  Why do u have to take off the door?

• 
  @johnodonnell90558 ай бұрын

  Thank u ..very helpful

• 
  @gabrielasanchez91911 ай бұрын

  I got my shark grill installed on my 2017 jeep Wrangler unlimited but the clicks that are closed to the headlights don't want to stay click if click they unlock over and over

• 
  @macpac380311 ай бұрын

  Can you still adhust the idle after you do this method?

• 
  @courtneybrown93511 ай бұрын

  Thank you doing this tomorrow 🎉

• 
  @AlphonsusPonsioen-wl6fm Жыл бұрын

  Thanks

• 
  @alessandrodutra6164 Жыл бұрын

  👏🏻👏🏻👏🏻👏🏻

• 
  @deadbeast99k85 Жыл бұрын

  Looks like you've got a knockoff cap . I'm them guessing that the coil is too . Stay away from the orange .

• 
  @83mike860 Жыл бұрын

  How do I replace the bulb 💡

• 
  @jeffreyjhouser Жыл бұрын

  I have a 2011 Ford Fusion that is assembled slightly differently but this video was very helpful!

• 
  @stianjarnass Жыл бұрын

  Hi thanks for this really great tutorial 👏🙏. How do I know if the sparkplug is pre -gapped? I'm waiting for my Ngk plug 🤔😁

• 
  @sennehulsmans5631 Жыл бұрын

  I did all the steps, now it does not start..

• 
  @catherinebauroth48282 жыл бұрын

  Great video! Thanks! Replaced easily!

• 
  @doricdave2 жыл бұрын

  Gets to the main part and skips it! 🤷‍♂️

• 
  @D_Dowg62611 ай бұрын

  Exactly! 🤦🏽‍♂️

• 
  @DM-hh6un2 жыл бұрын

  I did it excatly and mine is real loose. U can literally turn it ? What did I do wrong

• 
  @jchlo47902 жыл бұрын

  Happen to know why I can't get my 01 blaster? Did this,got it running good for a couple days now it seems like the same thing happened again,no spark but I cut the wires to it.like I said I had to cut the toes a few days ago ,got it going, running good for a couple days and today it started sputtering and lost spark all of a sudden... Any help

• 
  @PipesByA_Rebel2 жыл бұрын

  Thank you!

• 
  @somekiwidude2 жыл бұрын

  as soon as you said raptor 660 i subed i have the exact same quads a blaster 200 and raptor 660

• 
  @GG-wm7mx2 жыл бұрын

  My blaster revs up high what can it be I have to turn it off quick don’t want it to blow up lol

• 
  @darioalcala6995Ай бұрын

  Check out ur throttle cable and ur idle screw

• 
  @feliciahill57882 жыл бұрын

  Thank for posting the video, like the other comments state, it was an easy fix that saved me money by doing it myself!

• 
  @jameslove26562 жыл бұрын

  Very helpful video, simple and clear instructions.

• 
  @jakemir2 жыл бұрын

  Where did you get the key switch dash kit? I cannot find one that will how’s the indicator lights on my raptor

• 
  @slick1kwx2 жыл бұрын

  My original is heated- I found a color match heated but it has a puddle light. Will it still connect?

• 
  @danidragonfly2 жыл бұрын

  Thank you! Your video is so much simpler than the others I watched.

• 
  @mattmaverick7032 жыл бұрын

  Will the 2011-2012 mirrors with the mini blind spot corner mirrors that are integrated work on the older 2006-2010 Fusions? (Basic power mirrors without heated features) just wondered!

• 
  @javiermartinez3362 жыл бұрын

  How did you know the stem was crooked? Was your alignment off or bars hit tank? I’m having issues aligning my front wheels, my pitman arm was bent pretty bad so I got a new one but now I cannot aligning it. Beginning to think the steering stem may be bent as well.

• 
  @rayperrenoud62102 жыл бұрын

  Got an 06 blaster and the previous owner had a wrist throttle which made it difficult to control unless you were drag racing. I ordered a used OEM thumb throttle off ebay which had a wire harness attached. Thanks for explaining what that connected to and what the TORS system is. I believe with the wrist throttle currently on the Blaster they already had to bypass the TORS system. I'll just remove the rubber grommet from the harness and silicone her closed!

• 
  @dianagutierrez77532 жыл бұрын

  I just did mine thanks to your video! You explained it perfectly! This is my first time adding accessories to my new Jeep. Again, thank you!

• 
  @RyanSmithRenoRyan2 жыл бұрын

  Thanks

• 
  @MixieStudios3 жыл бұрын

  They don’t come with torxs bolts lol

• 
  @charlesstone5463 жыл бұрын

  Should the seals be on the stem before you attach the bottom. Braket?

• 
  @danperea2463 жыл бұрын

  Dude wtf I did that and now my throttle is stuck wide the fuck open when I disconnect the box above the brain like u said. . u fucked me man not cool

• 
  @canelo48723 жыл бұрын

  Thanks man me and my uncle where struggling we cleaned the carb like 5 times 👍👍

• 
  @thereesebonneau3 жыл бұрын

  Thank you so much

• 
  @vuntrx22173 жыл бұрын

  Right place . Thanks for the help.

• 
  @connersnow2983 жыл бұрын

  Nice vid

• 
  @ricardodelriego40133 жыл бұрын

  Did you change the brake lever?

• 
  @thomashowe63743 жыл бұрын

  The mount thats holding your trail tech vapor on what is that called and where can I buy it?