Thanks Jorden. I installed my jet cat on a model boat and I was getting air bubbles. I learned to use the control to purge the fuel line too. Thank you. Last question….i haven’t run my model in a while, do I need to update the ecu ?
@Rcaviator5413 күн бұрын
Have you flown the P-38?
@johnnyrizzo805718 күн бұрын
good video, just what I needed. question does your vaccum choke pull off seem to pull all the way in. I was watching mine and its always on preventing the secondary to open?
@3D-RCАй бұрын
Nice video! I have a question: I am interested in buying such an airplane and I am interested in putting in a 22 kg engine with a diameter of 116 mm and a length of 275 mm. My question is, can you check for me whether the dimensions of such an engine will fit into the fuselage without a problem?? Huge thanks in advance!
@jkepps29 күн бұрын
Here is a video that will hopefully help. kzread.info/dash/bejne/gY1ks81mhLawYaQ.html
@PYCbIK2 ай бұрын
Красота
@wayneschenk55122 ай бұрын
Nice.
@pickeringwoodworker3 ай бұрын
Dude, you have ice water in hour veins. lol. If I pulled my dipstick and saw that, I would need to be committed. lol.
@basimpsn3 ай бұрын
I'm jealous 😂
@srwilliams19633 ай бұрын
I'm a Savox, fan
@irwinwka6 ай бұрын
Great video. You clarified a few of the set up issues for me. I noticed your kero start was smoking near the turbine case. Is that normal or does it need to be tightened up a bit? Thanks
@jkepps6 ай бұрын
I'm glad it helped! This is a turbine I bought used, so I don't know its history or why the glow plug area is loose and smoking. It definitely is not normal as far as I know. I tried rotating it to see if it would tighten up, but that didn't seem to help.
@ZeL-iq5sf9 ай бұрын
this id definitely one of the most detailed videos on starting up a jetcat turbine
@jkepps9 ай бұрын
Thank You!
@christophersmythe109310 ай бұрын
Great Tutorial. Thanks l,m like a mushroom that has come out of the dark to the light chris smythe manchester England UK
@jkepps9 ай бұрын
LOL! Thank You! Glad I could help.
@TheJuli199510 ай бұрын
Fill the thank maybe then it will run..
@jkepps9 ай бұрын
RIGHT!!!
@theborg269x11 ай бұрын
I love your video hope to see it flying and a review on it!
@mr.maneuver28711 ай бұрын
An you help me find out how I can check my engine time I bought one second hand
@jkepps9 ай бұрын
Glad I could help.
@franciscotrujillo4961 Жыл бұрын
numero de carburador por favor? un saludo
@tracythomasvision Жыл бұрын
Thanks!
@jkepps9 ай бұрын
Most welcome!
@gutterclear1051 Жыл бұрын
8 yrs later this video is still helping people ...I have my fuel pump Clear hose on bottom of carb when it should be ontop ... she's running rich and yeah trying to get her going...
@helifun5058 Жыл бұрын
Thanks Jorden, you saved my day. Grate instruction video👍👍👍
@jkepps9 ай бұрын
Thank You!!! Glad it helped!
@jeffhuntsman5883 Жыл бұрын
Planted.😮
@williamrouse1705 Жыл бұрын
That's kinda cool. How high was this flight? I didn't expect it to go so fast either.
@johnphillipmiska6343 Жыл бұрын
Thank you for the simple, yet in-depth description! So much easier to follow than the user manual.
@jkepps9 ай бұрын
Thank You!!
@crookedboot2727 Жыл бұрын
Hi Jordon, what size are your jets and primary rods?
@butithapelo4331 Жыл бұрын
I can do that in 20min the guy is the 1st timer
@jkepps Жыл бұрын
Cool You're my hero! I know who to call next time!
@randymarsh100 Жыл бұрын
Such a valuable guide for someone new to this. Really helping put this together. Thanks for taking the time!
@jkepps9 ай бұрын
Thank You! My pleasure
@keithmarston98222 жыл бұрын
nice vidio jordon keep us in foamd bud
@josephkerkau25202 жыл бұрын
It is a very nice job from what I can see..
@josephkerkau25202 жыл бұрын
Did the wheels come with the kit? or did you have to order them as an accessory??
@josephkerkau25202 жыл бұрын
You really need to stop every once in a while with your camera.. let us see what you've done, you're moving the camera around way too much!!
@yarpos2 жыл бұрын
I'm confused, the opening problem statement is the choke is not opening properly, do the adjustment and the test for success is the choke full closed?
@AtoJUMPandHARDSTYLE5 ай бұрын
it should be opening when the intake manifolds heats up. At default (and cold) position it should be in the closed position
@jkepps3 жыл бұрын
Thank you everyone for taking the time to watch my video. Note: Comments were disabled due to new KZread policies. They have now been enabled.
@boboscar993 жыл бұрын
if it smells gas like then you need to replace your intake gasket is my best guess
@serzykzykoff15342 жыл бұрын
Why intake gasket? could be head gasket as well, no?
@quintonmudd20723 жыл бұрын
Congratulations to the line who crossed as Omega Psi Phi at Tuskegee University in Spring 2007!
@abolatius3 жыл бұрын
Thank you!
@steveos51123 жыл бұрын
Informative , Thanks!
@DavidGarcia-qx6dd3 жыл бұрын
Hi I have a 88 5.7 cobra my was running for like 35 min and died by if self I try go re starter and no lock so what I need to do if some one can help me
@milkmandan81943 жыл бұрын
Looking good man. Congrats
@tommyy123tn3 жыл бұрын
Very nice. Although I don't believe that glass is rated for the floor
@jkepps3 жыл бұрын
Thanks! Yes, I have come to confirm you are correct about the glass tile.
@JM-ct7yz3 жыл бұрын
beautiful shower 👍🏽
@glenlyons93353 жыл бұрын
Very nice job cuzo.
@lennyadamowicz76423 жыл бұрын
You can do whatever you put your mind, body, & soul into! That tile job came out nice as hell! It’s great just like it is but if you would of continued that waterfall look as a border on the 2 side walls! Great job & coulda woulda should’ve! I’m sure you can show anyone in your area & you can make some great money! Love to see that on U-Tube! That’ll be great doing 1 at a time & recording it all! Great job my man!! 💪💪💯👌👌
@jkepps3 жыл бұрын
Thanks for the reply and feedback! It means a lot!
@speedracer96273 жыл бұрын
Great job on the bathroom! I’m in the same camp - couldn’t have done it without the amazing Sal D!!
@jkepps3 жыл бұрын
Sal Rocks!
@lucasjohnson58713 жыл бұрын
Interestingly enough, your bathroom appears to be the same dimensions as mine. :-) you just gave me some great ideas!
@jkepps3 жыл бұрын
Awesome sauce! Go for it!
@lucasjohnson58713 жыл бұрын
I love sals videos. When I have more cash saved for emergencies... i will do my own. :-)
@jkepps3 жыл бұрын
Sals videos gives you such confidence dont they!
@fencerider14923 жыл бұрын
Nice job sir 😎
@jkepps3 жыл бұрын
Thanks!
@barbkelly35243 жыл бұрын
Absolutely gorgeous
@jkepps3 жыл бұрын
Thank you very much!
@limestar97513 жыл бұрын
Amazing job.
@keithmarston98224 жыл бұрын
ok jordon have u done the vidio ove the fusi pls
@jkepps4 жыл бұрын
Keith, sorry, just now seeing your message. I will need to check my videos to see what I have. Give me a few days, as I'm in the middle of a home renovation at the moment.
@bd88394 жыл бұрын
sounds like a fuel pump problem / test ir fuel psi. if not go efi.
Пікірлер
Thanks Jorden. I installed my jet cat on a model boat and I was getting air bubbles. I learned to use the control to purge the fuel line too. Thank you. Last question….i haven’t run my model in a while, do I need to update the ecu ?
Have you flown the P-38?
good video, just what I needed. question does your vaccum choke pull off seem to pull all the way in. I was watching mine and its always on preventing the secondary to open?
Nice video! I have a question: I am interested in buying such an airplane and I am interested in putting in a 22 kg engine with a diameter of 116 mm and a length of 275 mm. My question is, can you check for me whether the dimensions of such an engine will fit into the fuselage without a problem?? Huge thanks in advance!
Here is a video that will hopefully help. kzread.info/dash/bejne/gY1ks81mhLawYaQ.html
Красота
Nice.
Dude, you have ice water in hour veins. lol. If I pulled my dipstick and saw that, I would need to be committed. lol.
I'm jealous 😂
I'm a Savox, fan
Great video. You clarified a few of the set up issues for me. I noticed your kero start was smoking near the turbine case. Is that normal or does it need to be tightened up a bit? Thanks
I'm glad it helped! This is a turbine I bought used, so I don't know its history or why the glow plug area is loose and smoking. It definitely is not normal as far as I know. I tried rotating it to see if it would tighten up, but that didn't seem to help.
this id definitely one of the most detailed videos on starting up a jetcat turbine
Thank You!
Great Tutorial. Thanks l,m like a mushroom that has come out of the dark to the light chris smythe manchester England UK
LOL! Thank You! Glad I could help.
Fill the thank maybe then it will run..
RIGHT!!!
I love your video hope to see it flying and a review on it!
An you help me find out how I can check my engine time I bought one second hand
Glad I could help.
numero de carburador por favor? un saludo
Thanks!
Most welcome!
8 yrs later this video is still helping people ...I have my fuel pump Clear hose on bottom of carb when it should be ontop ... she's running rich and yeah trying to get her going...
Thanks Jorden, you saved my day. Grate instruction video👍👍👍
Thank You!!! Glad it helped!
Planted.😮
That's kinda cool. How high was this flight? I didn't expect it to go so fast either.
Thank you for the simple, yet in-depth description! So much easier to follow than the user manual.
Thank You!!
Hi Jordon, what size are your jets and primary rods?
I can do that in 20min the guy is the 1st timer
Cool You're my hero! I know who to call next time!
Such a valuable guide for someone new to this. Really helping put this together. Thanks for taking the time!
Thank You! My pleasure
nice vidio jordon keep us in foamd bud
It is a very nice job from what I can see..
Did the wheels come with the kit? or did you have to order them as an accessory??
You really need to stop every once in a while with your camera.. let us see what you've done, you're moving the camera around way too much!!
I'm confused, the opening problem statement is the choke is not opening properly, do the adjustment and the test for success is the choke full closed?
it should be opening when the intake manifolds heats up. At default (and cold) position it should be in the closed position
Thank you everyone for taking the time to watch my video. Note: Comments were disabled due to new KZread policies. They have now been enabled.
if it smells gas like then you need to replace your intake gasket is my best guess
Why intake gasket? could be head gasket as well, no?
Congratulations to the line who crossed as Omega Psi Phi at Tuskegee University in Spring 2007!
Thank you!
Informative , Thanks!
Hi I have a 88 5.7 cobra my was running for like 35 min and died by if self I try go re starter and no lock so what I need to do if some one can help me
Looking good man. Congrats
Very nice. Although I don't believe that glass is rated for the floor
Thanks! Yes, I have come to confirm you are correct about the glass tile.
beautiful shower 👍🏽
Very nice job cuzo.
You can do whatever you put your mind, body, & soul into! That tile job came out nice as hell! It’s great just like it is but if you would of continued that waterfall look as a border on the 2 side walls! Great job & coulda woulda should’ve! I’m sure you can show anyone in your area & you can make some great money! Love to see that on U-Tube! That’ll be great doing 1 at a time & recording it all! Great job my man!! 💪💪💯👌👌
Thanks for the reply and feedback! It means a lot!
Great job on the bathroom! I’m in the same camp - couldn’t have done it without the amazing Sal D!!
Sal Rocks!
Interestingly enough, your bathroom appears to be the same dimensions as mine. :-) you just gave me some great ideas!
Awesome sauce! Go for it!
I love sals videos. When I have more cash saved for emergencies... i will do my own. :-)
Sals videos gives you such confidence dont they!
Nice job sir 😎
Thanks!
Absolutely gorgeous
Thank you very much!
Amazing job.
ok jordon have u done the vidio ove the fusi pls
Keith, sorry, just now seeing your message. I will need to check my videos to see what I have. Give me a few days, as I'm in the middle of a home renovation at the moment.
sounds like a fuel pump problem / test ir fuel psi. if not go efi.