This is my bench run setup of my JetCat P120. As a newbie to turbines, I ran into a couple of issues along the way. Hopefully someone finds this useful.
Жүктеу.....
Пікірлер: 19
@ZeL-iq5sf9 ай бұрын
this id definitely one of the most detailed videos on starting up a jetcat turbine
@jkepps
9 ай бұрын
Thank You!
@johnphillipmiska6343 Жыл бұрын
Thank you for the simple, yet in-depth description! So much easier to follow than the user manual.
@jkepps
9 ай бұрын
Thank You!!
@randymarsh100 Жыл бұрын
Such a valuable guide for someone new to this. Really helping put this together. Thanks for taking the time!
@jkepps
9 ай бұрын
Thank You! My pleasure
@junoypiСағат бұрын
Thanks Jorden. I installed my jet cat on a model boat and I was getting air bubbles. I learned to use the control to purge the fuel line too. Thank you. Last question….i haven’t run my model in a while, do I need to update the ecu ?
@helifun5058 Жыл бұрын
Thanks Jorden, you saved my day. Grate instruction video👍👍👍
@jkepps
9 ай бұрын
Thank You!!! Glad it helped!
@christophersmythe109310 ай бұрын
Great Tutorial. Thanks l,m like a mushroom that has come out of the dark to the light chris smythe manchester England UK
@jkepps
9 ай бұрын
LOL! Thank You! Glad I could help.
@tracythomasvision Жыл бұрын
Thanks!
@jkepps
9 ай бұрын
Most welcome!
@irwinwka6 ай бұрын
Great video. You clarified a few of the set up issues for me. I noticed your kero start was smoking near the turbine case. Is that normal or does it need to be tightened up a bit? Thanks
@jkepps
5 ай бұрын
I'm glad it helped! This is a turbine I bought used, so I don't know its history or why the glow plug area is loose and smoking. It definitely is not normal as far as I know. I tried rotating it to see if it would tighten up, but that didn't seem to help.
@mr.maneuver28711 ай бұрын
An you help me find out how I can check my engine time I bought one second hand
Пікірлер: 19
this id definitely one of the most detailed videos on starting up a jetcat turbine
@jkepps
9 ай бұрын
Thank You!
Thank you for the simple, yet in-depth description! So much easier to follow than the user manual.
@jkepps
9 ай бұрын
Thank You!!
Such a valuable guide for someone new to this. Really helping put this together. Thanks for taking the time!
@jkepps
9 ай бұрын
Thank You! My pleasure
Thanks Jorden. I installed my jet cat on a model boat and I was getting air bubbles. I learned to use the control to purge the fuel line too. Thank you. Last question….i haven’t run my model in a while, do I need to update the ecu ?
Thanks Jorden, you saved my day. Grate instruction video👍👍👍
@jkepps
9 ай бұрын
Thank You!!! Glad it helped!
Great Tutorial. Thanks l,m like a mushroom that has come out of the dark to the light chris smythe manchester England UK
@jkepps
9 ай бұрын
LOL! Thank You! Glad I could help.
Thanks!
@jkepps
9 ай бұрын
Most welcome!
Great video. You clarified a few of the set up issues for me. I noticed your kero start was smoking near the turbine case. Is that normal or does it need to be tightened up a bit? Thanks
@jkepps
5 ай бұрын
I'm glad it helped! This is a turbine I bought used, so I don't know its history or why the glow plug area is loose and smoking. It definitely is not normal as far as I know. I tried rotating it to see if it would tighten up, but that didn't seem to help.
An you help me find out how I can check my engine time I bought one second hand
@jkepps
9 ай бұрын
Glad I could help.
Fill the thank maybe then it will run..
@jkepps
9 ай бұрын
RIGHT!!!