Пікірлер

• 
  @shahthanvi-ne4ve5 күн бұрын

  How about wall loading on beams??

• 
  @shahthanvi-ne4ve5 күн бұрын

  Great. How to automate footing sizes based on bearing capacity of soil etc for hundreds of footings in CSI ETABS and SAFE? Its too tedious there

• 
  @ar.abhishek_shinde32709 күн бұрын

  Where can I be able to download the Rhino file and Grasshopper Scripts for the same?

• 
  @amirmohammaddaareyni366712 күн бұрын

  Hey, nice video. When I try this problem I get this error from AnalysisModel. 1. Solution exception:Method not found: 'Void TeDaSharp.Elements.ElementCurveBeam..ctor(Int32, Int32, Double, Double, Double, Double, Double, Double, Double, System.Collections.Generic.List`1<Double[]>, Double, Double, Boolean, Boolean, Boolean, Boolean, Double, Double, Double, Double)'. do you know what is the problem?

• 
  @dimvoly21 күн бұрын

  At 6:32 do you get some funky bending on the top chord because the last "triangle" isn't a triangle? I'm guessing that's just like the because you were showing an example only.

• 
  @StructuredParametrics20 күн бұрын

  You are correct that the non-perfect triangle at the ends can cause large bending moments. They do that shape with an offset to make it possible to manufacturer as it gets tight at the junctions. The rest of the truss shape determines how bad the effect is.

• 
  @dimvoly21 күн бұрын

  Very fancy stuff, cool that it works on the web

• 
  @AlexLopez-ww2odАй бұрын

  You need to have these script on your website or a full tutorial

• 
  @StructuredParametrics26 күн бұрын

  Good feedback, thanks. We have added quite a few scripts now and will continue with the remainder.

• 
  @AlexLopez-ww2odАй бұрын

  Where is the script for auto design demo on the website?

• 
  @kalpit3d934Ай бұрын

  Your videos are very good. Nice to hear you after long time.

• 
  @StructuredParametricsАй бұрын

  Thanks. Yes we have been busy with some projects for a while and have not had much time for more videos...

• 
  @dimvolyАй бұрын

  Looking good, nice to have rebars auto-generated. May want to crank up the volume on the voice.

• 
  @2010sowmyaАй бұрын

  what is the use when this is not free for use

• 
  @Aygn-bt6orАй бұрын

  Hey, thanks for sharing the script so far. May i can ask you how you got the rendered frame into a sheetview with a titleblock? thx

• 
  @StructuredParametricsАй бұрын

  You can make a titleblock from simple lines and text. We made one with titles, dates etc as inputs and made it into a cluster which can be placed anywhere.

• 
  @mustafaabdo67182 ай бұрын

  I can't thank you enough, keep it up

• 
  @alparslanm.7290Күн бұрын

  böyle bi arch bridge tasarladigsan banada yollama imkanin var mi?

• 
  @tinkatul2 ай бұрын

  Muy buena.

• 
  @tinkatul2 ай бұрын

  Gracias. Saludos.

• 
  @thashriftippu2 ай бұрын

  can i get the file

• 
  @WALID03063 ай бұрын

  thanks ! great idea !

• 
  @lakshaygupta39444 ай бұрын

  What is the name of the plugin under which toolbar "truss analysis" is available?

• 
  @StructuredParametricsАй бұрын

  It is part of the 'struc-scripts' plugin. The component is called 'truss analysis' and the icon is a small truss.

• 
  @toti52125 ай бұрын

  Hello, I was wondering how to do this type of calculations in an existing building. I have imported my building from Revit.

• 
  @jaydipvasani7 ай бұрын

  can u make video how do u apply surface mesh load using karamba 3d

• 
  @AliAhmed-ro7si7 ай бұрын

  Hi I am new at grasshopper I want to do the analysis of the cable and strut structure and don't know where to start if anybody can help me

• 
  @AliAhmed-ro7si7 ай бұрын

  Hi I am new at grasshopper I want to do the analysis of the cable and strut structure and don't know where to start if anybody can help me

• 
  @user-nb2qx3xc2i7 ай бұрын

  Thanks for the video, it's very instructive for beginners like me. Please share more Alpaca 4d tutorials with us :)

• 
  @miguelayora86278 ай бұрын

  Congratulations for this very interesting, how you could get the script and some tutorial to adapt this script to other cases.

• 
  @WALID03069 ай бұрын

  thanks !

• 
  @3dMistri9 ай бұрын

  is this workflow capable of doing detailed modelling to the level of tekla.

• 
  @Osama-Anwar9 ай бұрын

  Is the layout produced is the most optimal layout or is it just according to given c/c distance between beams?

• 
  @equakesim10 ай бұрын

  this is great, but is there any chance to get/buy the script to see how to do this with kangaroo? or some recommendation for some book, tutorial, help us out here. thanks in advance!

• 
  @manu330810 ай бұрын

  Brilliant explanation of the program, if I wanted to perform a modal analysis of the structure in your model and verify the buckling or critical load, how could I do it? Manuel

• 
  @mahamgul774510 ай бұрын

  how?

• 
  @er.chetanlaxmanpatilcreati392311 ай бұрын

  How do you make visualization structure

• 
  @wongminghao897011 ай бұрын

  Hi, can i have a sample of the e2k file that you are using? It seems that the script cannot read the text file and no curve parameters are extracted

• 
  @edstock168 Жыл бұрын

  Where can I get this script?

• 
  @3dMistri Жыл бұрын

  i have few questions: 1. whether to learn karamba3d or etabs for working on rcc structures. 2. can be import 3d model of exact steel bar bending from etabs.

• 
  @matteofacino381 Жыл бұрын

  Hi! I tried to run the structure analysis on the model that I constructed by following your previous video "Tutorial: Simple Truss Structural Analysis with Karamba in Grasshopper and Rhino". Unfortunately it wasn't possible for me to select the nodes. It seems that the model I made through Grasshopper isn't made by actual points (marked with an "O" in Rhino), but by coordinates (marked with an "X"). I noticed that the same thing happens in your model which I previously referred to. Therefore as I try to "set multiple Points" I'm not able to select them. I hope you can help me solve my problem. Thank you very much.

• 
  @sadiqsalehprottoy2906 Жыл бұрын

  5. Lunchbox 4. Kangaroo2 3. Karamba 2. Kiwi3D 1. Rhino inside Revit

• 
  @eqsenz Жыл бұрын

  What is the key you are entering? Thanks

• 
  @leonidasj2260 Жыл бұрын

  thanks for the video, very helpful! how can i add the loads of the columns and walls or joists?

• 
  @mainsawadidie6031 Жыл бұрын

  Please how can I Copy??

• 
  @LazurURH Жыл бұрын

  Thank you for the video! Using the current version and cannot plug multiple supports into AModel. Rest seems to work but getting no results from that issue (tried with support curve which is working, but would need 2 point supports instead).

• 
  @shahthanvi-ne4ve Жыл бұрын

  Nice presentation and explanation however the deck design itself from beam to beam is also need explanation,

• 
  @infernall_blessfree_waghun8377 Жыл бұрын

  does it also work for walls?

• 
  @toannghiale8064 Жыл бұрын

  interesting your work!! May i ask you if you can create a window or door with the Revit API via Python and Dynamo?

• 
  @careydillon8729 Жыл бұрын

  Do you have these videos showing the actual Grasshopper interface? I installed your scripts, bought a key, but have no idea how to utilize them

• 
  @StructuredParametrics Жыл бұрын

  We will send you some help

• 
  @shahthanvi-ne4ve Жыл бұрын

  Couldn't get a complete picture of gh usefulness?!

• 
  @StructuredParametrics Жыл бұрын

  We have requests for the ability to model structure in Rhino/grasshopper as many architects use Rhino. This helps engineers work with architectural models. You can also use grasshopper to manipulate modelled geometry in other ways.

• 
  @simbajagadeeshansimba Жыл бұрын

  is it possible to generate BBS for Rebar?

• 
  @StructuredParametrics Жыл бұрын

  Yes we have a script that does this. The BBS can be opened in Excel or similar.

• 
  @HM-eb9jt Жыл бұрын

  is there a way that enables to interface ram concept with grasshopper for parametric design and to get the tendons data?

• 
  @StructuredParametrics Жыл бұрын

  This could be developed but we are not aware of a solution at the moment

• 
  @nicolasramirez3944 Жыл бұрын

  BHoM I think works with RAM

• 
  @HM-eb9jt Жыл бұрын

  @@nicolasramirez3944 thank you

• 
  @32_srishtiwadhwa20 Жыл бұрын

  Any grasshopper plugin you know about to analyse accessibility in plans?

• 
  @AndreaBarbieri-rr2ew Жыл бұрын

  Hi there, when I drag the curves into the component nothing happens in Rhino, the curves are still curves without any geometry of the concrete beam and reinforcement showing up. If I query the component output with Panel I can see that concrete section and reinforcement exist but they are not visible in Rhino. Possible cause? How can I fix that?

• 
  @StructuredParametrics Жыл бұрын

  This is called 'Bake' in Grasshopper. Right click the component and select 'Bake...'

• 
  @AliMaher-qb4zq Жыл бұрын

  As usual great tutorials. I will start learning Grasshopper, which should I take and begin with books or online courses?