Going to check with my neighbor, who just installed them with many Large oak trees in his backyard, but some reviews show with this type of guard they May tend to build up leaves on top of them, I have a high pitched roof , but wondering when you bend them down if they will collect more debris on top of them
@joehighsmith295116 күн бұрын
Thanks for responding. We bought my parents vacation home which come with this similar spa. We can't find the manuals in the house or much information online pertaining to the key pad and operation of it. Looks like leisure bay went out of buisness. We can get parts, there's a sequence to entering the temperature is what we've found so far. Thanks and be good.
@joehighsmith295116 күн бұрын
What model is this?
@lawrencegraham016 күн бұрын
@@joehighsmith2951 it’s been so long since I owned this tub. I’ll be honest I can’t remember!
@lawrencegraham016 күн бұрын
@@joehighsmith2951 it’s been so long since I’ve of the time, I’ll be honest I can’t remember!
@scarlett493321 күн бұрын
So what was disconnected? It would of been nice to see that because i have no idea what to disconnect
@lawrencegraham020 күн бұрын
@@scarlett4933 if you watch the video from the end back to the beginning, it’s should be easy to follow I believe. Just didn’t think to film it until afterwards.
@scarlett493320 күн бұрын
@@lawrencegraham0 I did watch it. Thank you. Not saying it isn’t a good video. I in fact did change out the idler pulley, cleaned it all out and I am still getting a rumbling going on. Any thoughts would be greatly appreciated. The belt looks good and I didn’t find any bad spots on it. When it spins there is like a boom, boom, boom sound going on. lol ugh! Thank you for the video. I appreciate your help.
@bberanek22Ай бұрын
Thank you for this super helpful video. I could never have imagined that lint buildup could cause such a crazy amount of noise!
@lawrencegraham028 күн бұрын
You’re very welcome! It’s pretty wild
@doncarlos28202Ай бұрын
Thanks for the video! Great tips... while I don't have the mesh, I bought Atlas and it's a good guide.
@lawrencegraham0Ай бұрын
Not a problem! I’m really glad it was a good guide!
@johnshoemaker7548Ай бұрын
I appreciate the video, I realize I will just reverse the steps but I would like to see a video of the actual disassembly as well, do you have that video or know of one for this model? Haven’t been able to find one
@lawrencegraham0Ай бұрын
You’re very welcome! Unfortunately, I do not have that video. I got all the way to the end and realized I probably should have been filming haha. You are correct if you go from the end of the video, it will walk you through disassembly.
@bishophampton16173 ай бұрын
Shouldn't the valve be facing the top of the spring?
@lawrencegraham03 ай бұрын
There probably is a way to do that. It’s been a while since I did it and I no longer have the vehicle. But I imagine I had my reasons. Configuration, I set it up, it worked well.
@jackrivera81195 ай бұрын
Perfect instructions, My dryer was vibrating and sounded like a plane taking off, it sounded like it was coming from the front where the exhaust fan is, and when I applied pressure to the door and front of the machine it would quiet down a bit. Seemed like it was the fan. I followed the disassembly instructions, removed about 3 cups of built up lint from the fan blades, cleaned the housing, reassembled everything........Like new, Thanks
@lawrencegraham05 ай бұрын
Really glad this helped! Thanks for watching.
@classicxl6 ай бұрын
Hey My 11 rzr800s grinds while trying to shift between gears at idle . Do you think it could be my primary clutch
@lawrencegraham06 ай бұрын
Yes that's what it sounds like! But if I were you I would check all that stuff through there well. Make sure nothing is binding up or catching.
@JoseNunez-um7ew6 ай бұрын
Did it work
@lawrencegraham06 ай бұрын
Yes it did work
@salscavo31106 ай бұрын
Do you have a link for the light bar?
@lawrencegraham06 ай бұрын
No unfortunately I don't. I did get it on Amazon though.
@kevinhillard41757 ай бұрын
Wheredidyougetrearrackextender
@user-rx4gv6jj7h7 ай бұрын
What’s the coast?
@tavoc4068 ай бұрын
I literally just fixed my squeaky noise. I took pictures but no video. The problem was the pulley/ pin that’s right next to the blower motor pulley. I had to file down a bit the pin and then greased up and lined up the pulley and I’m good to go.
@steveolson83858 ай бұрын
Really wish someone would record the noise so I can see if it’s what I’m experiencing. Hundreds of Maytag repair videos showing how to take it apart, but not the noise they are fixing!
@lawrencegraham08 ай бұрын
I'll see if I can find it and add it in.
@scarlett493320 күн бұрын
I got a boom, boom, boom noise going on. Now about 4 years ago it was a squealing sound which was the idler pulley. This noise is different that i have now. I have taken it all apart and cleaned it out. Still can’t figure it out.
@tieoneon16148 ай бұрын
Never seen a blue one. These are awesome atv's, surprising the amount of power they got. Im 6'1 215lbs and it fits great and hit the limit 51mph no problem with me on it. Light steering, great handling and suspension and well built. I put tech screws in the tread blocks and had a blast riding on the rivers and and trails during winter.
@OscarLopez-xn4kg8 ай бұрын
Surprised that ladder didn’t slide on you with that angle 😂
@lawrencegraham08 ай бұрын
Haha, nah mate, it was fine. Concrete would be a different story. But works fine in the grass.
@farrock028 ай бұрын
Be careful on that ladder. Your angle is way too shallow.
@lawrencegraham08 ай бұрын
Appreciate the concern!
@tavoc4068 ай бұрын
Mine just started squeaking. Any videos on how to fix that issue?
@lawrencegraham08 ай бұрын
No sir unfortunately not. This was just one occasion where I opened mine up and took a look. If it's squeaking though, just try to figure out if it's coming from the top or the bottom, and where exactly its happening. Then just go from there.
@tavoc4068 ай бұрын
Mine just started squeaking too it seems like it’s coming from the bottom. Rear left side of im facing the dryer. I’m going to try and add silicone lubricant. Let’s see if that works. Seems like it’s a pulley based on other videos that look similar.
@alvinhoneto65168 ай бұрын
Onde vc compra peca de mtor dele ?
@SurfingWithTheMartian9 ай бұрын
I hope those work out ok for you. I will say that between your steep roof pitch and how fine the micromesh is I think you’re at risk for the micromesh getting clogged and rainwater running over the edge of your gutters especially during hard downpours. I live in Michigan so I have snow and ice to worry about so i don’t think I could use that product because the small spacing between the micromesh will freeze up and clog it. I just used rolls of 1/4” galvanized hardware cloth from the hardware store (much cheaper than the Atlas product). I feel 1/4”spacing in the hardware cloth mesh is plenty small enough to keep debris out that might clog the gutter and is big enough to avoid clogs that would cause rainwater to run off the edge of the gutter.
@lawrencegraham09 ай бұрын
Hey there! I appreciate it. So thankfully they have been fantastic. I need to post my new video of them in a heavy downpour from a few weeks ago. They have done a fantastic job for me. They seem to keep the vast majority of rain operating through the gutter properly. Sounds like you have it figured out for yourself which is great. You just need something that works for you and the cheaper you can do it, the better 😂. We don't deal with too much ice down here in the south, just occasionally. So luckily not my major concern.
@ashleythome9 ай бұрын
Is there any way to remove the front panel without taking the dryer out? Doesn’t seem like it but ours is stacked and gas so I’d rather not take it out of its cabinet if I can help it.
@lawrencegraham09 ай бұрын
Unfortunately I don't think so. Probably going to have to pull it out so you can get to all the screws. That top has to come off to release those electrical connections. Everything is pretty fragile, so I would definitely follow the steps.
@brianbassett43799 ай бұрын
Mesh gutter covers *will* stop leaves and other large debris from getting into gutters but large amounts of pollen (a few pine or cedar trees close to the house) can and will plug the screens quickly. They can be cleaned easily with a brass brush, but don't expect them to be maintenance-free... they're not. You will still need a high-quality ladder. The problem is worse with low-end DIY products as the low-chromium stainless steel screens age and begin to rust, and they *will* rust. Stainless steel is not stain-free and as always you get what you pay for. Buyer beware.
@LawrencePina7 ай бұрын
It's not just large amounts of pollen that can block the mesh, a heavy drop of oak sap can as well. It's sticky, very difficult to remove from lawn furniture, and on top of micromesh gutter covers, it hardens like fiberglass resin.
@Armageddon-qo4wy11 ай бұрын
Do you have to hold your foot on the brake to put in to park?
@lawrencegraham011 ай бұрын
No sir, not that I remember
@alexhuevera93911 ай бұрын
Impact gun? NO you need a drill
@lawrencegraham011 ай бұрын
The screws that it comes with it are self-tappers. A self-tapper is a screw that drills its own hole when rotated by a drill or impact.
@fijaisonjd11 ай бұрын
do you need to screw it in? or using the sticker side would be sufficient
@lawrencegraham011 ай бұрын
Using the 3m stick side would be sufficient. I highly doubt they will come off if stuck on properly.
@THEL0G1CAL1 Жыл бұрын
I just ordered these. I am curious, have you done any follow up on these? My concern is winter. I live in the NE area (Massachusetts to be exact) and I was wondering how these perform with snow and possible ice damns.
@lawrencegraham0 Жыл бұрын
I have yet to do a follow-up. I need to though, because they do a fantastic job in the rain. As far as snow goes, I have yet to experience that. I'm in NC and we didn't get any this winter. I imagine that they would do just fine, but also up north might be a completely different animal.
@Mike-ms8uq Жыл бұрын
Do you live in Minnesota
@lawrencegraham0 Жыл бұрын
No sir NC
@chuck300mxc Жыл бұрын
If you shim the secondary clutch and get the belt in the center of the primary it may help. But if it’s still turning the belt and secondary at idle then you have to replace the one way bearing on the primary. Until then I recommend shutting the rzr off and shifting with the motor off the keep from damaging the transmission.
@raisedbywolves100 Жыл бұрын
Super helpful video!
@captcaveman926 Жыл бұрын
Did it fix the problem?
@lawrencegraham0 Жыл бұрын
Yes it did
@haroldyazzie3538 Жыл бұрын
It's your bearing. It's probably sticking. When u started it. The secondary should not spin.
@zap... Жыл бұрын
How do you like the T connection? Would you ever consider doing each side with separate air lines to pressurize individually? Any down sides to connecting them together like you did? Thanks!
@lawrencegraham0 Жыл бұрын
So I no longer have the truck. But for the time that I did have it after I installed the airbags I loved it. I think I would still do the t connection. It's just easier to get equal air pressure, only have to fill up once. Maybe the only downside would be more possibilities for leaks? But I never really had any issues. I was telling a tractor with a trailer, probably a little over 6,000 lbs, absolute night and day difference once I had those bags in there.
@zap... Жыл бұрын
@@lawrencegraham0 Thank you!
@NorthlanderMN Жыл бұрын
I see sun light on them and that’s a great thing for these so they dry up fast. Show us in 2-4-6 years if your able to.
@rocketowl1115 Жыл бұрын
I just bought this yesterday! Your video definitely helps me feel like I can do it!!!😊 thanks.
@lawrencegraham0 Жыл бұрын
I'm glad it was helpful 🙂. Good luck with your install!
@kdpitman40 Жыл бұрын
I had mine for about 1year 2 months and total night mare
@lawrencegraham0 Жыл бұрын
I'm sorry to hear that! What all has gone wrong with it?
@kdpitman40 Жыл бұрын
So you just received it... how is it your favorite
@lawrencegraham0 Жыл бұрын
No Ma'am, I have had it for several years. I also have worked on various hot tubs for folks. It's my favorite because of the design of the seats, but also the ease of working on them and getting to the components if they need replacement.
@anthonytionloc6815 Жыл бұрын
any thoughts on not undoing the adhesive and leaving the tape side and just use the screws in case you need to unscrew them for any reason if you need to clear anything under the cover?
@lawrencegraham0 Жыл бұрын
Absolutely. The manufacturer says that's completely fine I believe. It's really your choice between screw or adhesive. I chose to do both just because I'm OCD. But to be honest, just using screws is probably the wiser choice. If I ever have to take one off or adjust something it will be a pain. That adhesive sticks very well.
@dangarretson8260 Жыл бұрын
Great job! Thanks for the time you took.
@vincev4191 Жыл бұрын
How fast did it go with the 115?
@lawrencegraham0 Жыл бұрын
Hey Vince, with me and my wife, we could do about 36 mph. Loaded down with gear and people, 30 mph.
@matthewwisenbaugh3883 Жыл бұрын
Just got one for my nephew he loves it.....
@filipinagarcia2076 Жыл бұрын
Commando, historia for pabor, asap
@bartbley1269 Жыл бұрын
You having the solid metal strip flat with the gutter will now collect debris where the screen and the solid metal strip meet . It seems all gutter guards keep the debris out of the rain gutter but the debris stays on top of the gutter guard
@lawrencegraham0 Жыл бұрын
In order to make a good seal with the gutter I prefer it flat. I will use a brush once a year and get up there to clean it. Very small issue in the bigger scheme of things.
@RobertSmith-ft9qz Жыл бұрын
I have had to remove some gutter guards from very steep roofs.
@aidenmurphy2997 Жыл бұрын
Does that truck have a sunroof? can you get that truck with one or are they only available on GMC?
@lawrencegraham0 Жыл бұрын
No it didn't have a sunroof unfortunately. You could get it in the Chevrolet, it was just pretty rare that people went for that option I suppose. I saw much more of the sunroofs on the crew cab version than the extended cab version
@aidenmurphy2997 Жыл бұрын
If you don’t mind, can you answer one more question for me? Could you get an 03 Silverado z71 in an LS trim(cause that’s the truck my cousin has)but my teacher in my school is tellling me that you could only get that configuration in the LT trucks, it doesn’t make any sense cause my cousin has an LS Z71 so it’s clearly not true
@lawrencegraham0 Жыл бұрын
@@aidenmurphy2997 Oh absolutely. You could get it in an LS. The Z71 is just the off-road package. You can go to look at values and see they offered it in combination.
@estebanvb4864 Жыл бұрын
He has low range? Manual
@lawrencegraham0 Жыл бұрын
It does have a low range and it is a semi auto clutch. It can crawl if you want it to.
@estebanvb4864 Жыл бұрын
@@lawrencegraham0 it has it on the gear stick? Thanks
@shatahsgsbssgay4480 Жыл бұрын
low and high range is located near the foot shifter, there is a lever that you pull up, then back and pash down for low gearing
@timbui5556 Жыл бұрын
Thank you for a great instruction. Very helpful
@symplemynd57 Жыл бұрын
I saw that your gutter is installed OVER your drip edge..... not good
@lawrencegraham0 Жыл бұрын
Are you talking about the actual gutters? Or the guards that go over the gutters?
@symplemynd57 Жыл бұрын
@@lawrencegraham0 The actual gutter looks like it's put over top of the drip-edge
@tyewilliamsi3674 Жыл бұрын
OCTOBER 28-22-FROM A X HONDA ACURA TECH AMERICAN HONDA S ARE JUNK WARNING BUYERS BEWARE SAVE YOUR MONEY BAD PAINT TRANSMISSION 7BWA AMERICAN HONDA KNEW ABOUT THIS BAD DESIGNS TRANSMISSION S AND NTSB DIDN'T DO NOTHING CONGRESS HONESTLY SCREWED US FWD CARS ARE NOT MADE FOR BAD US STREET S FWD CARS ARE JUNK WARNING BOYCOTT AMERICAN HONDA ⛽ ETHANOL GAS IS JUNK E10 NOVEMBER 8-22-VOTE THEM ALL OUT DC BALTIMORE PA CONGRESS LIES
Пікірлер
Going to check with my neighbor, who just installed them with many Large oak trees in his backyard, but some reviews show with this type of guard they May tend to build up leaves on top of them, I have a high pitched roof , but wondering when you bend them down if they will collect more debris on top of them
Thanks for responding. We bought my parents vacation home which come with this similar spa. We can't find the manuals in the house or much information online pertaining to the key pad and operation of it. Looks like leisure bay went out of buisness. We can get parts, there's a sequence to entering the temperature is what we've found so far. Thanks and be good.
What model is this?
@@joehighsmith2951 it’s been so long since I owned this tub. I’ll be honest I can’t remember!
@@joehighsmith2951 it’s been so long since I’ve of the time, I’ll be honest I can’t remember!
So what was disconnected? It would of been nice to see that because i have no idea what to disconnect
@@scarlett4933 if you watch the video from the end back to the beginning, it’s should be easy to follow I believe. Just didn’t think to film it until afterwards.
@@lawrencegraham0 I did watch it. Thank you. Not saying it isn’t a good video. I in fact did change out the idler pulley, cleaned it all out and I am still getting a rumbling going on. Any thoughts would be greatly appreciated. The belt looks good and I didn’t find any bad spots on it. When it spins there is like a boom, boom, boom sound going on. lol ugh! Thank you for the video. I appreciate your help.
Thank you for this super helpful video. I could never have imagined that lint buildup could cause such a crazy amount of noise!
You’re very welcome! It’s pretty wild
Thanks for the video! Great tips... while I don't have the mesh, I bought Atlas and it's a good guide.
Not a problem! I’m really glad it was a good guide!
I appreciate the video, I realize I will just reverse the steps but I would like to see a video of the actual disassembly as well, do you have that video or know of one for this model? Haven’t been able to find one
You’re very welcome! Unfortunately, I do not have that video. I got all the way to the end and realized I probably should have been filming haha. You are correct if you go from the end of the video, it will walk you through disassembly.
Shouldn't the valve be facing the top of the spring?
There probably is a way to do that. It’s been a while since I did it and I no longer have the vehicle. But I imagine I had my reasons. Configuration, I set it up, it worked well.
Perfect instructions, My dryer was vibrating and sounded like a plane taking off, it sounded like it was coming from the front where the exhaust fan is, and when I applied pressure to the door and front of the machine it would quiet down a bit. Seemed like it was the fan. I followed the disassembly instructions, removed about 3 cups of built up lint from the fan blades, cleaned the housing, reassembled everything........Like new, Thanks
Really glad this helped! Thanks for watching.
Hey My 11 rzr800s grinds while trying to shift between gears at idle . Do you think it could be my primary clutch
Yes that's what it sounds like! But if I were you I would check all that stuff through there well. Make sure nothing is binding up or catching.
Did it work
Yes it did work
Do you have a link for the light bar?
No unfortunately I don't. I did get it on Amazon though.
Wheredidyougetrearrackextender
What’s the coast?
I literally just fixed my squeaky noise. I took pictures but no video. The problem was the pulley/ pin that’s right next to the blower motor pulley. I had to file down a bit the pin and then greased up and lined up the pulley and I’m good to go.
Really wish someone would record the noise so I can see if it’s what I’m experiencing. Hundreds of Maytag repair videos showing how to take it apart, but not the noise they are fixing!
I'll see if I can find it and add it in.
I got a boom, boom, boom noise going on. Now about 4 years ago it was a squealing sound which was the idler pulley. This noise is different that i have now. I have taken it all apart and cleaned it out. Still can’t figure it out.
Never seen a blue one. These are awesome atv's, surprising the amount of power they got. Im 6'1 215lbs and it fits great and hit the limit 51mph no problem with me on it. Light steering, great handling and suspension and well built. I put tech screws in the tread blocks and had a blast riding on the rivers and and trails during winter.
Surprised that ladder didn’t slide on you with that angle 😂
Haha, nah mate, it was fine. Concrete would be a different story. But works fine in the grass.
Be careful on that ladder. Your angle is way too shallow.
Appreciate the concern!
Mine just started squeaking. Any videos on how to fix that issue?
No sir unfortunately not. This was just one occasion where I opened mine up and took a look. If it's squeaking though, just try to figure out if it's coming from the top or the bottom, and where exactly its happening. Then just go from there.
Mine just started squeaking too it seems like it’s coming from the bottom. Rear left side of im facing the dryer. I’m going to try and add silicone lubricant. Let’s see if that works. Seems like it’s a pulley based on other videos that look similar.
Onde vc compra peca de mtor dele ?
I hope those work out ok for you. I will say that between your steep roof pitch and how fine the micromesh is I think you’re at risk for the micromesh getting clogged and rainwater running over the edge of your gutters especially during hard downpours. I live in Michigan so I have snow and ice to worry about so i don’t think I could use that product because the small spacing between the micromesh will freeze up and clog it. I just used rolls of 1/4” galvanized hardware cloth from the hardware store (much cheaper than the Atlas product). I feel 1/4”spacing in the hardware cloth mesh is plenty small enough to keep debris out that might clog the gutter and is big enough to avoid clogs that would cause rainwater to run off the edge of the gutter.
Hey there! I appreciate it. So thankfully they have been fantastic. I need to post my new video of them in a heavy downpour from a few weeks ago. They have done a fantastic job for me. They seem to keep the vast majority of rain operating through the gutter properly. Sounds like you have it figured out for yourself which is great. You just need something that works for you and the cheaper you can do it, the better 😂. We don't deal with too much ice down here in the south, just occasionally. So luckily not my major concern.
Is there any way to remove the front panel without taking the dryer out? Doesn’t seem like it but ours is stacked and gas so I’d rather not take it out of its cabinet if I can help it.
Unfortunately I don't think so. Probably going to have to pull it out so you can get to all the screws. That top has to come off to release those electrical connections. Everything is pretty fragile, so I would definitely follow the steps.
Mesh gutter covers *will* stop leaves and other large debris from getting into gutters but large amounts of pollen (a few pine or cedar trees close to the house) can and will plug the screens quickly. They can be cleaned easily with a brass brush, but don't expect them to be maintenance-free... they're not. You will still need a high-quality ladder. The problem is worse with low-end DIY products as the low-chromium stainless steel screens age and begin to rust, and they *will* rust. Stainless steel is not stain-free and as always you get what you pay for. Buyer beware.
It's not just large amounts of pollen that can block the mesh, a heavy drop of oak sap can as well. It's sticky, very difficult to remove from lawn furniture, and on top of micromesh gutter covers, it hardens like fiberglass resin.
Do you have to hold your foot on the brake to put in to park?
No sir, not that I remember
Impact gun? NO you need a drill
The screws that it comes with it are self-tappers. A self-tapper is a screw that drills its own hole when rotated by a drill or impact.
do you need to screw it in? or using the sticker side would be sufficient
Using the 3m stick side would be sufficient. I highly doubt they will come off if stuck on properly.
I just ordered these. I am curious, have you done any follow up on these? My concern is winter. I live in the NE area (Massachusetts to be exact) and I was wondering how these perform with snow and possible ice damns.
I have yet to do a follow-up. I need to though, because they do a fantastic job in the rain. As far as snow goes, I have yet to experience that. I'm in NC and we didn't get any this winter. I imagine that they would do just fine, but also up north might be a completely different animal.
Do you live in Minnesota
No sir NC
If you shim the secondary clutch and get the belt in the center of the primary it may help. But if it’s still turning the belt and secondary at idle then you have to replace the one way bearing on the primary. Until then I recommend shutting the rzr off and shifting with the motor off the keep from damaging the transmission.
Super helpful video!
Did it fix the problem?
Yes it did
It's your bearing. It's probably sticking. When u started it. The secondary should not spin.
How do you like the T connection? Would you ever consider doing each side with separate air lines to pressurize individually? Any down sides to connecting them together like you did? Thanks!
So I no longer have the truck. But for the time that I did have it after I installed the airbags I loved it. I think I would still do the t connection. It's just easier to get equal air pressure, only have to fill up once. Maybe the only downside would be more possibilities for leaks? But I never really had any issues. I was telling a tractor with a trailer, probably a little over 6,000 lbs, absolute night and day difference once I had those bags in there.
@@lawrencegraham0 Thank you!
I see sun light on them and that’s a great thing for these so they dry up fast. Show us in 2-4-6 years if your able to.
I just bought this yesterday! Your video definitely helps me feel like I can do it!!!😊 thanks.
I'm glad it was helpful 🙂. Good luck with your install!
I had mine for about 1year 2 months and total night mare
I'm sorry to hear that! What all has gone wrong with it?
So you just received it... how is it your favorite
No Ma'am, I have had it for several years. I also have worked on various hot tubs for folks. It's my favorite because of the design of the seats, but also the ease of working on them and getting to the components if they need replacement.
any thoughts on not undoing the adhesive and leaving the tape side and just use the screws in case you need to unscrew them for any reason if you need to clear anything under the cover?
Absolutely. The manufacturer says that's completely fine I believe. It's really your choice between screw or adhesive. I chose to do both just because I'm OCD. But to be honest, just using screws is probably the wiser choice. If I ever have to take one off or adjust something it will be a pain. That adhesive sticks very well.
Great job! Thanks for the time you took.
How fast did it go with the 115?
Hey Vince, with me and my wife, we could do about 36 mph. Loaded down with gear and people, 30 mph.
Just got one for my nephew he loves it.....
Commando, historia for pabor, asap
You having the solid metal strip flat with the gutter will now collect debris where the screen and the solid metal strip meet . It seems all gutter guards keep the debris out of the rain gutter but the debris stays on top of the gutter guard
In order to make a good seal with the gutter I prefer it flat. I will use a brush once a year and get up there to clean it. Very small issue in the bigger scheme of things.
I have had to remove some gutter guards from very steep roofs.
Does that truck have a sunroof? can you get that truck with one or are they only available on GMC?
No it didn't have a sunroof unfortunately. You could get it in the Chevrolet, it was just pretty rare that people went for that option I suppose. I saw much more of the sunroofs on the crew cab version than the extended cab version
If you don’t mind, can you answer one more question for me? Could you get an 03 Silverado z71 in an LS trim(cause that’s the truck my cousin has)but my teacher in my school is tellling me that you could only get that configuration in the LT trucks, it doesn’t make any sense cause my cousin has an LS Z71 so it’s clearly not true
@@aidenmurphy2997 Oh absolutely. You could get it in an LS. The Z71 is just the off-road package. You can go to look at values and see they offered it in combination.
He has low range? Manual
It does have a low range and it is a semi auto clutch. It can crawl if you want it to.
@@lawrencegraham0 it has it on the gear stick? Thanks
low and high range is located near the foot shifter, there is a lever that you pull up, then back and pash down for low gearing
Thank you for a great instruction. Very helpful
I saw that your gutter is installed OVER your drip edge..... not good
Are you talking about the actual gutters? Or the guards that go over the gutters?
@@lawrencegraham0 The actual gutter looks like it's put over top of the drip-edge
OCTOBER 28-22-FROM A X HONDA ACURA TECH AMERICAN HONDA S ARE JUNK WARNING BUYERS BEWARE SAVE YOUR MONEY BAD PAINT TRANSMISSION 7BWA AMERICAN HONDA KNEW ABOUT THIS BAD DESIGNS TRANSMISSION S AND NTSB DIDN'T DO NOTHING CONGRESS HONESTLY SCREWED US FWD CARS ARE NOT MADE FOR BAD US STREET S FWD CARS ARE JUNK WARNING BOYCOTT AMERICAN HONDA ⛽ ETHANOL GAS IS JUNK E10 NOVEMBER 8-22-VOTE THEM ALL OUT DC BALTIMORE PA CONGRESS LIES