Пікірлер

• 
  @grodd20407 сағат бұрын

  Hell yeah bro

• 
  @theJonnymac15 сағат бұрын

  maybe need to have some torque feedback where if one reel has a problem the other won't pull. so you can fix a jamb on the fly before it falls apart.

• 
  @theAmazing15 сағат бұрын

  That would be ideal, unfortunately it’s likely the most expensive solution, time/money wise

• 
  @jaybirdflyin17 сағат бұрын

  What is it for?

• 
  @theAmazing16 сағат бұрын

  My other videos are free!

• 
  @Fitz0fury22 сағат бұрын

  Hey man, cool contraption, but you need to find a solution that helps distribute your weight better. Lots of risk of shoulder or bicep damage.

• 
  @Kaleki93522 сағат бұрын

  Routing the most tension into a full-body harness seems to solve all the issues! Then make the rope higher strength and the motor a little beefier, and you're on your way to becoming a real-world superhero

• 
  @theAmazing21 сағат бұрын

  Thanks for the concern! If you watch any of my videos showing the actual rappelling process, you’ll see the device works just fine. What you see here has nothing to do with weight distribution. My weight is distributed through a friction module on my wrist. This is not uncommon for gymnasts like me. It is actually mounted on a high bar grip which is already built expressly for this purpose. There is no need for a full-body harness for this

• 
  @Fitz0fury20 сағат бұрын

  @theAmazing oh ok ur a gymnast. That changes it a bit. I was sort of imagining a semi fit engineer who might not realize what could happen to the shoulder especially when turning. I was in the army for years and the number of people with shoulder damage and bicep tears from airborne jumps is truely astounding. I've seen guys with full tears and their bicep in full retraction. Granted that's the additional weight of a combat load, but still I wouldn't wish it on my worst enemy.

• 
  @weeejuКүн бұрын

  I wonder if the spool is getting stretched out as the rope is wedged in between the previous windings

• 
  @theAmazing21 сағат бұрын

  Yes! I do think this is the case, today we will see

• 
  @TONOCLAYКүн бұрын

  Maybe a more dense rope? Looks like its just compressing into itself.

• 
  @theAmazing21 сағат бұрын

  Yeah I originally had a more dense rope, needed more and ordered the same, and they sent me this :/ that’s the trouble with eBay I guess

• 
  @verytoe5371Күн бұрын

  You should try a sprocket ⚙️ and chain

• 
  @theAmazingКүн бұрын

  Not a bad idea actually

• 
  @Dylan_-_18 сағат бұрын

  Right next to his arm and face tho? With not a lot of protection? Yeahhhh no

• 
  @waitwhat720Күн бұрын

  Tf did I just watch

• 
  @Are_U_MaddКүн бұрын

  I do not know bruh

• 
  @rajveer-bv7ypКүн бұрын

  He's working on a Spider-Man graphing project. I've been watching him for a long time Pretty good guy

• 
  @papaspooks853123 сағат бұрын

  a real inventor doing his thing

• 
  @MahdiMessiah3 күн бұрын

  PLEASE TALK ABOUT WALL CRAWLING??? is it possible to climb or to cling to walls like spider man? Using the gecko nanotube stuff or electrostatic adhesion or with microspine gloves/shoes..? Some type of suction device or gadget? What is the superior type of technology for wall crawling like spider-man? What would your approach or solution to this be??

• 
  @theAmazing21 сағат бұрын

  My approach varies from surface to surface. Watch this video to see the dry adhesive I developed: kzread.info/dash/bejne/hGt3ktODkdfRo84.html . It's likely that this type will only really work on glass or polished/reflective surfaces. Brick will probably require several small yet macroscopic hooks (this was built in the wall climbing episode of Prototype This) that share tension. Suction is obviously already done but it requires electrical power and also only works on non porous surfaces.

• 
  @MahdiMessiah19 сағат бұрын

  Awesome thank you sir , you earned a sub🙏🏻

• 
  @eqzqeqzq96805 күн бұрын

  Sick

• 
  @kaladin41225 күн бұрын

  Question, why the painters tape over the print bed? Doesn’t that just ruin adhesion?

• 
  @theAmazing5 күн бұрын

  The adhesion between the TPU filament and the bed is TOO strong :)

• 
  @e-manyvelez74304 күн бұрын

  ​@@theAmazing Have you considered using garolite as your print bed? Makers muse has a great video about it, I use it for all of my prints and it self releases the prints after they cool down

• 
  @peterking63346 күн бұрын

  Cool

• 
  @h7opolo8 күн бұрын

  good video, my dude

• 
  @puppiesgacha294811 күн бұрын

  So i know this probably wont be answered and this video came out 2 years ago but i want to make web fluid for my webshooters and dont know much about chemistry. I know you use r134a but i dont feel ok using that because of how dangerous it is. Is it just something thatd be used to propel the fluid or is there a chemical reaction involved there that I cant recreate with anything else? And if theres alternatives what are some good ones to consider? My dad said I should try C02 but idk if thatd actually work or if itd cause problems or be dangerous

• 
  @Extreme256612 күн бұрын

  11:28 that's clever

• 
  @Vez3D20 күн бұрын

  Holy cow!!! Awesome

• 
  @MNasreen21 күн бұрын

  ❤❤❤❤share

• 
  @joannemarieespera554727 күн бұрын

  Is there any tutorial??

• 
  @Topp200727 күн бұрын

  the best!!!

• 
  @jaydenandfriends8824Ай бұрын

  Can you make a video of you mixing the chemicals to make the web fluid cuz this looks sick

• 
  @AMa-ym6pyАй бұрын

  Ya that would be tuff plz make it

• 
  @ivoryas1696Ай бұрын

  Heh. Neat.

• 
  @bruhjitsu7273Ай бұрын

  Actually sick asl 🔥

• 
  @GrimTech-bk1pxАй бұрын

  If you wish to make things more interesting go to bionic concept they have good gears and gadget you can have. The palm LEDs with high beams, A multifunction bo-staff, etc. 😉👍

• 
  @thecrafter456Ай бұрын

  Crazy breakthrough keep it up😮🎉

• 
  @DevDogEditsАй бұрын

  This is amazing. I’m a big fan.

• 
  @filigenzilab9613Ай бұрын

  Amazing work! I can see this device going places! Keep up the good work

• 
  @brunoelidasilvasouza6412Ай бұрын

  5:11 bro how you make this thing bro

• 
  @DevDogEditsАй бұрын

  Yoo he’s back I’ve been waiting!!

• 
  @JustinYaleАй бұрын

  This is pretty awesome! Would love to see it in daylight and also see how high/low it can go.

• 
  @michaeljordan5630Ай бұрын

  Seem you have been working a lot at it. So the wrinch can support your weight for a safe descent right?

• 
  @theAmazingАй бұрын

  Yessir, the friction is enough to mechanically suspend me in midair without descending. I can control the descent with a mechanical lever I can operate with my other hand!

• 
  @MomonomoreАй бұрын

  It’s not really visible but it’s still sick. Been following you for years. Keep up the good work ❤

• 
  @theAmazingАй бұрын

  Haha hopefully I’ll get well-lit test soon

• 
  @DefinitivespideyАй бұрын

  This is “amazing”! (Get it?) I’ve been a fan since as long as I could remember and you shaped me into the man I am today,if it wasn’t for u I’d never be in honors, never make web shooters/fluid of my own and would have never been interested in this kinda stuff, i love you bromatically

• 
  @DefinitivespideyАй бұрын

  Smash

• 
  @mae-the-art-boiАй бұрын

  I hate to suggest it however, Ai could help, at least in theory

• 
  @radifuddinahmed66502 ай бұрын

  Extraordinary! Thank you for sharing your work. It has helped immensely for my research in additive manufacturing. I am working with the python interpretation and please let me know if we can collaborate.

• 
  @brunoelidasilvasouza64122 ай бұрын

  How you make the orange cartridge

• 
  @theterong832 ай бұрын

  BORAX AND PVA GLUE SLIME HUH

• 
  @MasterOf-Puppets2 ай бұрын

  We’re gonna have to team up on some projects. I’ll inbox you

• 
  @wendyxwigs2 ай бұрын

  bro is starting his hero arc

• 
  @wendyxwigs2 ай бұрын

  red colour

• 
  @wendyxwigs2 ай бұрын

  good work

• 
  @wendyxwigs2 ай бұрын

  nice

• 
  @wendyxwigs2 ай бұрын

  good work

• 
  @wendyxwigs2 ай бұрын

  nice work

• 
  @wendyxwigs2 ай бұрын

  awesome

• 
  @wendyxwigs2 ай бұрын

  nice

• 
  @wendyxwigs2 ай бұрын

  i love your web shooters

• 
  @madebygelilashorts2 ай бұрын

  Spider man Lotus😂

• 
  @itta_poopuu80622 ай бұрын

  Hell yeah

• 
  @nothardic2 ай бұрын

  Finally, THE Spider-Man