We love tech and gadgets as much as you do, so at Techspin, we put our passion into research, testing and making guides and videos to inform and educate. All our reviews are shaped by your inspiration, requests, and comments, so with your input we keep evolving to deliver the best, even including our mistakes, so you don't make the same. Come check out tech with us, and help shape our channel. Because we couldn't be doing any of this without you guys. Thanks for watching!
Пікірлер
good info thank you
Does it work with the ps5 120 hz 2k?
Did you watch the video? We mention in the TLDR that it doesn't work with PS4 /PS5. 😉
@@Techspin I am sorry (can you give me a good monitor for ps5 120hz ) and 2k
Just picked up a set at goodwill for $5 , sounds amazing
Yeah they're not bad for what they are 😊
Is there inbuilt speakers?
Watch the TLDR near the start, it tells you 😉
Hey, i am gonna buy the 1000VA one but not of cyberpower. I will buy the apc one. Is that okay since cyber power is not available in my country. I just wanna know if 660w/1000VA will run my pc of rtx 3060, 5600x, 650 watt psu etc for atleast 15 minutes.
Haven't tested APC but with what info I could find online, I think they're in the same ballpark. I think it might be able, but with use and age the run time gets shorter and shorter. Hope it works out for you. Please subscribe, thanks for your support!
@@Techspin okay i will subscribe, i have many questions so i am asking, hope you dont mind 1. what do you mean by shorter and shorter? like i will have to replace battery every 1 or 2 year? 2. my pc has already turned off itself without shutting down 5-6 times because i didnt have a ups, so does that create any issue to my hardware? if it does is there a way of fix it or check? 3. do the psu cable that is attached to the bottom of the cabinet also connect to the ups? and the monitor one goes there too right, just checking if i am right. 4. did you have any issue related to your pc after the power outage without ups?
@@Techspin btw previously i had an intext protector 725, and it worked but it stopped working after a while maybe because of overheating, because when i checked the psu cable that was connected to cabinet and to the ups aswell, it was very very hot.
Last reply for now. You need to think about a UPS as a device that allows you to shut down your PC properly in the case of power failure. If there's longer runtime that's great, but it's not the primary function- for that, you need a generator. 1) just like using a car battery to start your car, the ability to do so is affected by how many starts it's done, the age, and cold weather. YMMV. 2) Brownouts or spikes can damage your PC's power supply or anything connected to it. However, in 15 years and maybe 10 times of power loss, i did lose a network card twice, but everything else is fine. If it still works, should be okay. If there's a weird electronics burning smell, you'll know you need a tech friend. 3) Plug UPS into wall. Plug PC and monitor into UPS. 4) Just network cards so far. However i remove the UPS from the wall in case of heavy lightning, no protection over a close lightning strike. 5) If the PSU cable is getting hot, you either have a too small power wire (bigger=lower AWG) or something else is going on. Grab a thick power wire and test after gaming.
@@Techspin thank you very much for your reply and yes i do smell a burning smell when the pc turns on, why? is it because i am using a smaller cable as you mentioned in step 5, take ur time
Supports 360mm Arctic Freezer Iii in top?
Im not impressed with the run times.
And this is best case scenario, brand new! Think of a UPS as a box that allows you to shut down properly in case of a power outage. For anything longer, you'll need a generator. 😉 Please subscribe, thanks for your support!
I just got one and only couple days in there's black faded lines on the top of the screen like picture fading I really don't get it. I just bought it
Sounds defective
Does this monitor support Display port 2.1? Or only 1.4 because I currently have a hdmi but it locks at 144hz and I need a Display port to get 165 hz and my Gpu only supports 2.1 sockets
DP 1.4 only
hey, since you answer every comment, I'll give a try, any chance you got some good settings for the 1st G32QC??
Just better to search results online bud, I generally just use presets with a small warm/cool adjust and brightness as I need.
I have Apex 3 TKL i no pooling rate settings
Which one is better This one or Logitech wave keyboard!?
A new home for my 6700xt
Va Panel ain't good for editing and graphic design right , colour isn't accurate?
We tell you in the review. For design work you'd actually be looking in the $800-1000 USD range, and those panels currently aren't high refresh rate. I'd suggest trying out both VA and IPS to see which suits your needs better. Please subscribe, thanks for your support!
Worried about ghosting and black smearing, could you clarify how bad it is?
I came from an TN Panel and i think it is really bad. Im sending mine back tomorrow
@@dnafon5762 thanks for the feedback, I'm not considering any VA panel monitor from now on
Depends on how sensitive you are to it, it's just fine for me and I don't have to worry about gradual burn-in like you do with IPS. Haven't seen curved IPS though.
@@Techspin I do know curved IPS exists, but I think it's just rare, also, tested with my brother's monitor a while back and it looked terrible, all the colors lagging behind even with the high refresh rate of 165hz. Also not sure what you mean with burn-in, dont know much about it yet.
I only asked for a comment about it because I thought it would make a big difference from my brother's, but seemingly all VA's are fairly close
Any text pixalation issue?, like blur in text?
Where do I plug my pc and monitors again? Surge + battery or just surge?
We tell you in the video 😉
W H E R E U F O T E S T ? ? ?
Guess what?
I don’t have hook up to a tower.i just bought to hook up to my Xbox series x I work out of town a lot.but what specs do I need to put it on to have the best picture???
Google is your friend, we also tell you the setting in the TLDR near the start 😊
bought new fans for this case. i chose the thermaltake c12c (3 120 front, 2 120 side, and 1 120 exhaust). i wont be using the molex fans anymore because they can raise gpu temps slightly if placed over psu shroud and raise cpu temps if placed on the top vents
I've had this keyboard for 3 years and it works flawlessly. Sure the keycaps have a shine now, but there's nothing else I can complain about. I've tried other mecha-membrane keyboards (Corsair K55, Logitech G213 and Steelseries Apex 3) and the HyperX is the best when it comes to quality and feel.
I got the non b freesync version it would have been great for pc but it’s pretty basic for ps5 except I can’t get 1440p 120hz to work 😢
That's because it's a computer monitor and not a TV. Game consoles use TV HDMI timings which are very slightly different than PC HDMI timings. You'd think a PS5 should be able to hit different resolutions but let's not forget when PS4 allowed switching from 1080p to 4K that was a big deal. 😅
@@Techspin I finally got it working lol games look sharper at native 1440p 1080p and 4k upscaled looked blurry
@brianbanks5679 There ya go
Seems like they got rid of the video playlist.. unfortunately..
Seems that KZread no longer pops it up in frame when you click top right, on desktop it scrolls down and the playlist is actually bottom left. So strange. Thanks for calling this to my attention! 🦸
the front panel is hard to remove lol any tips
When we get/buy cases for review, we always triple check how the front is attached, standard way is with 4-6 grippy pegs, but some have had clips or screws, and in the early years I've broken a few! I think I covered removal in the video. Generally, some to quite a bit of ummph is required pulling outwards at the front panel's bottom. Good luck! 🤞🍀 Please subscribe, thanks for your support!
I bought the white version and built it with the rear io pointing up, so the gpu stays vertical and i love how it looks! In this configuration the psu lays in the bottom but since i have a 2 fan gpu cables weren't a problem, and i mounted 4 case fans, 2 on each side of the case blowing fresh air directly on the gpu and the cpu cooler. I think that this case shouldn't be for a classic build, it allows you to free your creativity and do things other case can't
The only downside is the i/o panel is almost unusable in this configuration. If only it could be moved around like the old design.
@@dazed_confused yeah but having better acces to the rear panel i don't actually need it
I noticed you mentioned it won't work for PS4... it will work, but resolution drops off from the 3440x1440. I'm running two of these on my home office setup and run my PS4 to one until I upgrade (just a casual gamer).
I usually try to add the "at the time of video release" disclaimer, as I did bring this to Gigabyte's attention and they very well may have revised the firmware the monitor ships with. That or a slight difference in TV video (not PC video) timings between NA and Asia regions for either the console or monitor. The PS4 AFAIK can't do widescreen? So the resolution drop is normal, but at least it works for you! Please subscribe, thanks for your support!
can you change any modes without the software i really want that color you have
Need to have the software installed to set the colors like that. Hope this helps. Please subscribe, thanks for your support!
what fan you put in the front ?
MSI fans we swapped from a different Velox version I believe. I state the change in the video.
This board will run the top three M.2 slots at full PCIe gen 4x4 with the GPU slot reduced to PCIe gen 4x8 (32GBs bandwidth) using the dual mode PCIe switch in BIOS set to "CPU". Switching to "Chipset" mode provides PCIe gen 4X16 to the GPU (64GBs bandwidth) and gen 4X4 to the top NVMe. The 2nd and 3rd M.2 drop to PCIe gen 3x2. The 4th M.2 is always PCIe gen 3x4. The RTX4090 loses 2-3% on gen 4x8 at most. Lesser GPUs the difference is negligible.
Hardest part about this, even for tech enthusiasts like myself, is there's no clear indication of what configuration delivers what speeds unless the manufacturer spells it out in the manual (sometimes) or if you have a brand new M.2 and GPU to test speed/performance. Overclocking is still great on this board, as we produced a video for MSI demonstrating this, but we aren't able to buy/get sponsored boards for testing just yet. Nice discoveries and feedback here, cheers!
Should I buy gigabyte G32QC-A or LG 32GN650 ?? and why ??
Should I buy gigabyte G32QC-A or LG 32GN650 ?? and why ??
Gigabyte G32QC-A: Brightness and capabilities, hands down, no contest .
What is the difference with spectrum wave and aurora????
I got mine used for 40 bucks for my x box one s and I hope I didn’t waste my money
Hi there! I have this case almost three years. Perfect running case! Currently on AM4 about to get AM5, already ordered 7800x3d, i have factory setup, quick help, where to add additional fans, exhaust or intake,,,does have options for bottom fans? What would you change for better performance,,,only air cooling will do? Appreciate any feedback Very good review... subscribed
You may need to play with the front 200mm fan speed in BIOS for more aggressive airflow. Spots for fans up top, not sure how hot the 7800x3D gets under full load, watch HW Unboxed for a review showing temps, anything over 85*C full load I'd be looking at AIO but I like air cooling also.
@@Techspin Will do,,thanks for the reply!
im looking to get this one to shrink down my build!! Good video thanks
Mine came with no charger ,? And how to stop party overlay flashing for no reason with xbox game bar , some mic's seem to And some don't? So frustrating
Charging cable, didn't say and there isn't a supplied charger, as it's meant to be plugged into your PC to charge, mentioned in the video. Not sure about Xbox game bar, didn't experience that issue, weird. Thanks for the report.
Would you happen to know how I adjust the color vibrance if the settings isn’t showing it’s highlighted? I’m not able to access it or change the contrast either
Believe this is disabled because you turned on HDR. HDR will disable most of these functions on most monitors.
i have a question.. say my main power is modifed "sine" wave, will this convert it to pure sine?
This is a battery backup device, so most products in this category don't 'clean' the power for sensitive electronic components, that's a rectifier. Some high end UPSs can do this, but you'll need to have a fairly precise/custom component selection for your needs- do a lot of research!
I bought this case without knowing about rgb. now i'd like to control the rgb from my computer, to sync the case fan with other component. Is it possible? I know my MB do have rgb and ARGB connector I don't actually use.
Most controllers can attach to the motherboard, ask a tech friend to help test and rewire it. Usually takes anywhere from 30 mins - 1 hour depending on cable management, speed demons may be faster after removing both case sides and locating the right wires and motherboard headers. 😉
what's the difference between the G32QC and the G32QC-A?
Year update with slight panel change, different software presets like DisplayID that most won't see except if you're trying surround with three monitors
@@Techspin thanks
HDR does not work in this Monitor i have ps4 pro and the cable 2.0 but still 2160P-YUV420 is not supported
Apologies, this monitor supports HDR. This panel is a 1440p, not 4K, and while possibly it may accept a higher-than-spec (4K is 2x bandwidth over 1440p) signal normally, it can't take this higher-higher HDR signal spec. Nor should you expect it to, as it's a monitor and not a TV; they are not quite interchangeable. 😊
hello guys !! I order this monitor and its great but its just 30hz but the monitor capable of 60hz and I have hdmi cable that support 2k / 4k it means 4k but it is still 30hz!! can please tell me what hdmi should I use and I will be thankful
You had to hold fn key just to use normal F1-F12 keys? :(
Yeah the size is shrunk so you hafta hold the fn key 😂
even with the workaround, those psu cables pinned against the top panel do not look safe and id worry about my psu cables getting damaged over time or not sustaining a secure connection :( really thought the case was cute and loved that it was compact for an atx but looks like i gotta keep lookin for the right case for me
It's not a problem but you do you! I'm certainly feeling safer this way than having all the cables pushing down a hot GPU IMHO 😂
According to some "electricians" (I can't verify the claims) the cables used in most psus are a specific kind that are fine with tight bends as long as they're not being bent over and over again.
Yeah they're designed to be bent around corners, but the only caveat is if you're using a 4090 with 600W ATX 12VHPWR cable-that case and that case alone currently is where you have to be careful.
Got this case today because at Turkey , E-ATX cases are so expensive... Molex is a no problem for me because theese fans are silent at molex (%100 power). If you want you can get a Molex+ 3pin Case fan, connect it to the motherboard, and connect DK431's Molex to the new Case Fan's Molex extention... And only a solution that will cost a few bucks.
Update: The master fan on this case just died, causing the other 3 slave fans to stop spinning. So we have to replace the fans. The problem with this is that DC/PWM case fans have a range of around 650-2000rpm depending on type/brand. At max rpm, fans are loud but they move a LOT of air. These fans are not loud, spinning slowly, and not moving a lot of air. Since these are capped running slowly at max 12v, there's no way to get them to go faster. So no, there's not a workaround... Except getting actual good fans.
@@Techspin I researched this case, the fans are 1200rpm 34CFM fans. Yes thats bad airflow but its quiet tier fans. 30-40CFM 12cm fans are quiet tier. If a fan is 12cm , Id expect 60-80CFM for performance in cooling. I upgraded this case from old cooler master silencio. I have 7600x , AK400 and rtx 3060ti. Cpu temp downed to 65 from 75-78 during gaming. My airflow improved.Also chipset and vrm temps are improved due to better airflow. But I sometimes feel that case fans have low airflow. For now I supported my airflow with 2x 76cfm 1800 rpm 3pin fans from left side and bottom. Will replace the default fans when they wear off (My pc is on +12hours a day, dust will wear off them fast...)
Our master fan lasted 16 months before dying causing the other 3 linked fans to stop spinning. Warranty is 12 months 🚩 Hope your master lasts longer than ours did 😅
@@Techspin Yep , will get 4x deepcool argb or tuf gaming kit when it dies...
Does this monitor have speakers
Mentioned if it does or not in the review
can it function without the external power supply?
Only as a paperweight. Otherwise, it needs power. 😅
@@Techspin thank you
It’s 80 + tax the apex 3 is 60 + tax
Depends on where you live, and the current price, which is subject to change after review.
Wow, that was the best explanation for a UPS i ever saw. Thank you
Glad to be of service. 😊
The specs say 173mm of clearance of the psu from first gpu slot. I have an huge psu of 180mm and a long gpu in front of it. Do you think it will fit with the tip of rotating the psu upside down or not ? My psu has slaved cables, and they can be bended... thank you.
Nope, need a bigger case or plan to purchase a smaller PSU or GPU, sorry bud.
@@Techspin thanks a lot 😉😉
No prob, health issues, sorry for the delayed reply. This case is challenging to work in and even with a normal size 150mm ATX PSU you'll have trouble with a 30cm PSU as we noted. 😉