life is about Trial and Error!!!! ive done Engines my next goal is to Rebuild my 1997 astro van 4l60E!! thanks for Sharing!!!
@RegenAutomotive3 күн бұрын
@Dario-h8g @Dario-h8g If I can do it, you can do it!. This guy's video helped me quite a bit: kzread.info/dash/bejne/ZYNk2KmfmbSddaw.htmlsi=gSkDaib9K5h72uYA Keep wrenchin, brotha 💪
@Dario-h8g2 күн бұрын
thanks for Sharing
@terrencemorris39834 күн бұрын
My son got that acadia them trucks is a p o s .got another a csr instead
@RegenAutomotive4 күн бұрын
@terrencemorris3983 Good call. I agree. I'm not a huge fan of these cars. I just happened to get a good deal on this one. It was also a PITA to work on!
@Allinfun67896 күн бұрын
It's the head gaskets that always worry me, but cleaning it up, making it roadworthy, and selling it you did a great job.
@RegenAutomotive6 күн бұрын
@Allinfun6789 Thank you very much. I'm currently doing the same thing on a Kia Rio. So, stay tuned!
@JPBinTN6 күн бұрын
Ryobi for the win!
@RegenAutomotive6 күн бұрын
@JPBinTN Yes, sir! I have no complaints with them so far.
@mikebrock19657 күн бұрын
I'm surprised the timing chain didn't need to be replaced.
@RegenAutomotive6 күн бұрын
@@mikebrock1965 It did! The previous owner did them a while back.
@jramielle9 күн бұрын
What do you have against mice? 🐭
@RegenAutomotive9 күн бұрын
@@jramielle LOL. They startle me!
@JackieElder-v7f13 күн бұрын
It is Very Interesting to watch and learn.
@RegenAutomotive13 күн бұрын
@@JackieElder-v7f Thanks! I thoroughly enjoy doing this stuff.
@erictownsend871118 күн бұрын
Please write the URL for that website so it can be copied and pasted. As it is, i'm getting errors when trying to read it. Nice Video. Thanks.
@RegenAutomotive18 күн бұрын
@@erictownsend8711 Thanks for watching! Here is the link: portal-diagnostov.com/en/
@erictownsend871112 күн бұрын
@@RegenAutomotive Thanks Very much, i'm in.
@RegenAutomotive12 күн бұрын
@@erictownsend8711 Perfect. You're welcome!
@jramielle23 күн бұрын
Wish I had an Autel...
@RegenAutomotive22 күн бұрын
They're pretty handy. Would definitely recommend!
@Manimal527926 күн бұрын
Nice video man
@RegenAutomotive26 күн бұрын
@Manimal5279 Thanks! I am currently working on a video of me flipping a GMC Acadia. On this one, I'm more detailed on the numbers and conditioning of the vehicle. So, stay tuned!
@RegenAutomotive9 күн бұрын
As promised, here is the video of me flipping the Acadia! kzread.info/dash/bejne/gZeomK1mhrHOldY.html
@gearshifterg975628 күн бұрын
While it is obvious there was minimal transmission experience, it is a wonder this transmission actually worked.
@RegenAutomotive28 күн бұрын
@@gearshifterg9756 Thank you, sir. I will take that as a compliment!
@gearshifterg975626 күн бұрын
@@RegenAutomotive There is a need for transmission builders. Just from what you have shown, a transmission shop would hire and train you. By the way, trying to reuse that original forward sprag would have been a mistake. Going with the hardened Borg Warner sprag was best.
@RegenAutomotive26 күн бұрын
@gearshifterg9756 Thanks again. I appreciate the kind words! Rebuilding a transmission has always been a bucket list DIY of mine. Next, I am going to rebuild an LS engine and play around with a custom engine stand and tuning. So, stay tuned!
@A.Wild.Yamster29 күн бұрын
Fucking phenomenal dawg. I’m about to seat mine with you as my guide
@DuTangTheCryptoSurfrАй бұрын
⚡️⚡️⚡️⚡️⚡️🛹🏄🏾♂️🤙🏼🌊
@STEVEEDGАй бұрын
I couldn’t unbolt the 3 bolts on each of the catalytic converters ended up cutting the exhaust oh well its a good excuse to get long tube headers now.
@RegenAutomotiveАй бұрын
@@STEVEEDG Sounds legit to me!
@arsenbassenov1685Ай бұрын
man I wish I saw this video earlier. So much conflicting information online. Ended up installing the low reverse piston wrong and as a result couldn't get the parking brake lever in. Had to take it all apart again and reassemble lol. Almost done with the rebuild. will see if it works on the weekend.
@RegenAutomotiveАй бұрын
@@arsenbassenov1685 Thanks for commenting. Good luck this weekend!
@papergatorzfedducca7998Ай бұрын
New subscriber bro!!
@RegenAutomotiveАй бұрын
@papergatorzfedducca7998 Thanks, brotha. Stay tuned for more videos!
@user-uf8dn6ib6iАй бұрын
@@RegenAutomotiveyes sir 💪🏿💪🏿💪🏿
@thesetruths1404Ай бұрын
Nice. Thanks!
@RegenAutomotiveАй бұрын
@@thesetruths1404 No problem. Thanks for watching!
@thesetruths1404Ай бұрын
@RegenAutomotive I watched all 3 4L60e videos. Would you do anything differently if you did it again? I have a 05 4x4 Yukon 5.3L. 233,000 miles. Looking to get a used cheap broken 4L60/65/70 to rebuild with my teen as a DIY learning project. To have ready. I found a used one for $60, with nothing but Reverse working. Thanks!
@RegenAutomotiveАй бұрын
@thesetruths1404 It sounds like you are doing yours on a budget, which is also the route I took. So far, I wouldn't have done anything differently. It's been about 3k km, and it's still holding up well. I just did a weekend of camping/ off-roading, and it took the abuse well.
@davepetrakos1192Ай бұрын
It was a good video for watching after viewing more detailed ones. I'm about to rebuild mine with 225k on it. It works fine, but I want to know I can travel coast2coast. Upgrades for towing are on my list of parts. Fortunately, I bought my 07 TBlazer for less than 3k from original owner, that happenedto own the local Chevy dealership... so spending 5k to totally refresh all parts ignored is ok. I was surprised you did not use some type of band clamp to perfectly mate the pump halves. Now to search for your follow up vid
@RegenAutomotiveАй бұрын
@@davepetrakos1192 Thanks for watching.
@goingbАй бұрын
Haha the coffee comment got u a like and a subscribe
@RegenAutomotiveАй бұрын
@goingb Thanks, Brother. Stay tuned for some more DIY and flip videos!
@wyattvandal3572Ай бұрын
Great job on this one Jer !
@RegenAutomotiveАй бұрын
Thank you sir!
@SeanEpoc2 ай бұрын
thanks mate i'll be doing my 06 hummer transmission asap as well, cheers
@RegenAutomotive2 ай бұрын
No problem. Below is a link to a video that helped me do mine. Let me know if you have any questions. Good luck! kzread.info/dash/bejne/ZYNk2KmfmbSddaw.htmlsi=WhgiRSpHxSj7GQJN
@kipholder85772 ай бұрын
i want to see if it works
@RegenAutomotive2 ай бұрын
You bet! Here's my video of me installing and testing it: kzread.info/dash/bejne/lJ2GprOhd67eZqQ.htmlsi=0IKqBF36dhg2-eo-
@longlivechina75382 ай бұрын
Your my hero
@longshot1532 ай бұрын
Great video man, thanks for posting!
@RegenAutomotive2 ай бұрын
Of course! Let me know if you have any questions.
@cassie99422 ай бұрын
1 day solid off this video
@robertcherry1892 ай бұрын
I'm gearing up to do mine right now. Your video was pretty straight forward informative. I'm in Texas, but understand Canadian quite well , lol. Good content buddy.
@RegenAutomotive2 ай бұрын
Thank you very much! I've put around 1000 km (64 miles) on the truck, and it's still working! If you haven't found it already, here's a more detailed video I used for my job. kzread.info/dash/bejne/ZYNk2KmfmbSddaw.htmlsi=zjTHdG34SZRvy-cY
@jramielle2 ай бұрын
High Five!
@sovan7813 ай бұрын
i replace mine , i remove the dash at first but i found out if you cut off the aluminum hose 3 inch after the bend you can slide out the heater core and use rubber heater hose to attach when installing a new heater core since the motor side is metal hose . i also realized the fitting of the heater core is pinch pressed and get work out over time then leak
@theblueproject54733 ай бұрын
Cheap? Yes. Good? No.
@little_red_the_Rolla3 ай бұрын
Enjoy getting paint on your hands
@donalddillon92583 ай бұрын
Excellent video and keep up the great work..”💯✅👌
@RegenAutomotive3 ай бұрын
Thank you very much! I appreciate the comment 🤟
@donalddillon92583 ай бұрын
@@RegenAutomotive no worries because your video was right on point and after I saw your video I’m sure if I just take my time I could actually drop my 4L60E from my 1997 Chevy C1500 myself now and go ahead and replace it myself..” yes indeed!💯👌
@bernadetterose40544 ай бұрын
'promo sm' 😱
@odaigle7774 ай бұрын
April fouls
@RegenAutomotive4 ай бұрын
LOL. April fools, Armor All is actually good! 😅
@jeremyb4564 ай бұрын
Hi I also have a 2012 Kia Sedona minivan I got mine with 116,000km now it has 149,540km I am the second owner I keep my oil changed every 6000km or once a year. Are these rode bearings a common issue on these 3.5 V6 engines? My issues were door lock actuator motors are junk other then that I haven't had any issues
@RegenAutomotive4 ай бұрын
Unfortunately, most Kias/Hyundais have rod bearing issues. The best thing you can do is keep up on your oil changes and monitor for metal in the oil.
@jramielle5 ай бұрын
"Simple" he says.. You were such a sweet summer child in the beginning 😂
@TechTonic4205 ай бұрын
1.9 TDi swap
@juanreyes40515 ай бұрын
Might be valves you might have to re adjust your valves
@TheHartxxx5 ай бұрын
Is that a Blackstone hat?
@RegenAutomotive5 ай бұрын
Yes lol
@jramielle5 ай бұрын
Running a car without a battery?! 😱
@jramielle6 ай бұрын
Your first rebuild? Man that's impressive! Where will you take good old Yukie next?!
@jeramyvandal32456 ай бұрын
u suck :)
@jramielle6 ай бұрын
Super informational!
@jramielle6 ай бұрын
I don't believe you. That's obviously sped up and you did not rebuild it that fast.
@Trulitty6 ай бұрын
No that’s in real time I was there
@RegenAutomotive6 ай бұрын
Can confirm. @Trulitty was there.
@jramielle7 ай бұрын
Can't wait for it to be dropped in the Yukon!
@RegenAutomotive7 ай бұрын
LOL. Hopefully it works 🤞
@Colourful4747 ай бұрын
Nice work!
@RegenAutomotive7 ай бұрын
Thank you very much!
@jeramyvandal41667 ай бұрын
u suck :)
@chevybigblock33117 ай бұрын
I’ve learned over the years to start at trailer wiring. 9/10 times the plug has been damaged in one way or another.
Пікірлер
I love bubbles!
life is about Trial and Error!!!! ive done Engines my next goal is to Rebuild my 1997 astro van 4l60E!! thanks for Sharing!!!
@Dario-h8g @Dario-h8g If I can do it, you can do it!. This guy's video helped me quite a bit: kzread.info/dash/bejne/ZYNk2KmfmbSddaw.htmlsi=gSkDaib9K5h72uYA Keep wrenchin, brotha 💪
thanks for Sharing
My son got that acadia them trucks is a p o s .got another a csr instead
@terrencemorris3983 Good call. I agree. I'm not a huge fan of these cars. I just happened to get a good deal on this one. It was also a PITA to work on!
It's the head gaskets that always worry me, but cleaning it up, making it roadworthy, and selling it you did a great job.
@Allinfun6789 Thank you very much. I'm currently doing the same thing on a Kia Rio. So, stay tuned!
Ryobi for the win!
@JPBinTN Yes, sir! I have no complaints with them so far.
I'm surprised the timing chain didn't need to be replaced.
@@mikebrock1965 It did! The previous owner did them a while back.
What do you have against mice? 🐭
@@jramielle LOL. They startle me!
It is Very Interesting to watch and learn.
@@JackieElder-v7f Thanks! I thoroughly enjoy doing this stuff.
Please write the URL for that website so it can be copied and pasted. As it is, i'm getting errors when trying to read it. Nice Video. Thanks.
@@erictownsend8711 Thanks for watching! Here is the link: portal-diagnostov.com/en/
@@RegenAutomotive Thanks Very much, i'm in.
@@erictownsend8711 Perfect. You're welcome!
Wish I had an Autel...
They're pretty handy. Would definitely recommend!
Nice video man
@Manimal5279 Thanks! I am currently working on a video of me flipping a GMC Acadia. On this one, I'm more detailed on the numbers and conditioning of the vehicle. So, stay tuned!
As promised, here is the video of me flipping the Acadia! kzread.info/dash/bejne/gZeomK1mhrHOldY.html
While it is obvious there was minimal transmission experience, it is a wonder this transmission actually worked.
@@gearshifterg9756 Thank you, sir. I will take that as a compliment!
@@RegenAutomotive There is a need for transmission builders. Just from what you have shown, a transmission shop would hire and train you. By the way, trying to reuse that original forward sprag would have been a mistake. Going with the hardened Borg Warner sprag was best.
@gearshifterg9756 Thanks again. I appreciate the kind words! Rebuilding a transmission has always been a bucket list DIY of mine. Next, I am going to rebuild an LS engine and play around with a custom engine stand and tuning. So, stay tuned!
Fucking phenomenal dawg. I’m about to seat mine with you as my guide
⚡️⚡️⚡️⚡️⚡️🛹🏄🏾♂️🤙🏼🌊
I couldn’t unbolt the 3 bolts on each of the catalytic converters ended up cutting the exhaust oh well its a good excuse to get long tube headers now.
@@STEVEEDG Sounds legit to me!
man I wish I saw this video earlier. So much conflicting information online. Ended up installing the low reverse piston wrong and as a result couldn't get the parking brake lever in. Had to take it all apart again and reassemble lol. Almost done with the rebuild. will see if it works on the weekend.
@@arsenbassenov1685 Thanks for commenting. Good luck this weekend!
New subscriber bro!!
@papergatorzfedducca7998 Thanks, brotha. Stay tuned for more videos!
@@RegenAutomotiveyes sir 💪🏿💪🏿💪🏿
Nice. Thanks!
@@thesetruths1404 No problem. Thanks for watching!
@RegenAutomotive I watched all 3 4L60e videos. Would you do anything differently if you did it again? I have a 05 4x4 Yukon 5.3L. 233,000 miles. Looking to get a used cheap broken 4L60/65/70 to rebuild with my teen as a DIY learning project. To have ready. I found a used one for $60, with nothing but Reverse working. Thanks!
@thesetruths1404 It sounds like you are doing yours on a budget, which is also the route I took. So far, I wouldn't have done anything differently. It's been about 3k km, and it's still holding up well. I just did a weekend of camping/ off-roading, and it took the abuse well.
It was a good video for watching after viewing more detailed ones. I'm about to rebuild mine with 225k on it. It works fine, but I want to know I can travel coast2coast. Upgrades for towing are on my list of parts. Fortunately, I bought my 07 TBlazer for less than 3k from original owner, that happenedto own the local Chevy dealership... so spending 5k to totally refresh all parts ignored is ok. I was surprised you did not use some type of band clamp to perfectly mate the pump halves. Now to search for your follow up vid
@@davepetrakos1192 Thanks for watching.
Haha the coffee comment got u a like and a subscribe
@goingb Thanks, Brother. Stay tuned for some more DIY and flip videos!
Great job on this one Jer !
Thank you sir!
thanks mate i'll be doing my 06 hummer transmission asap as well, cheers
No problem. Below is a link to a video that helped me do mine. Let me know if you have any questions. Good luck! kzread.info/dash/bejne/ZYNk2KmfmbSddaw.htmlsi=WhgiRSpHxSj7GQJN
i want to see if it works
You bet! Here's my video of me installing and testing it: kzread.info/dash/bejne/lJ2GprOhd67eZqQ.htmlsi=0IKqBF36dhg2-eo-
Your my hero
Great video man, thanks for posting!
Of course! Let me know if you have any questions.
1 day solid off this video
I'm gearing up to do mine right now. Your video was pretty straight forward informative. I'm in Texas, but understand Canadian quite well , lol. Good content buddy.
Thank you very much! I've put around 1000 km (64 miles) on the truck, and it's still working! If you haven't found it already, here's a more detailed video I used for my job. kzread.info/dash/bejne/ZYNk2KmfmbSddaw.htmlsi=zjTHdG34SZRvy-cY
High Five!
i replace mine , i remove the dash at first but i found out if you cut off the aluminum hose 3 inch after the bend you can slide out the heater core and use rubber heater hose to attach when installing a new heater core since the motor side is metal hose . i also realized the fitting of the heater core is pinch pressed and get work out over time then leak
Cheap? Yes. Good? No.
Enjoy getting paint on your hands
Excellent video and keep up the great work..”💯✅👌
Thank you very much! I appreciate the comment 🤟
@@RegenAutomotive no worries because your video was right on point and after I saw your video I’m sure if I just take my time I could actually drop my 4L60E from my 1997 Chevy C1500 myself now and go ahead and replace it myself..” yes indeed!💯👌
'promo sm' 😱
April fouls
LOL. April fools, Armor All is actually good! 😅
Hi I also have a 2012 Kia Sedona minivan I got mine with 116,000km now it has 149,540km I am the second owner I keep my oil changed every 6000km or once a year. Are these rode bearings a common issue on these 3.5 V6 engines? My issues were door lock actuator motors are junk other then that I haven't had any issues
Unfortunately, most Kias/Hyundais have rod bearing issues. The best thing you can do is keep up on your oil changes and monitor for metal in the oil.
"Simple" he says.. You were such a sweet summer child in the beginning 😂
1.9 TDi swap
Might be valves you might have to re adjust your valves
Is that a Blackstone hat?
Yes lol
Running a car without a battery?! 😱
Your first rebuild? Man that's impressive! Where will you take good old Yukie next?!
u suck :)
Super informational!
I don't believe you. That's obviously sped up and you did not rebuild it that fast.
No that’s in real time I was there
Can confirm. @Trulitty was there.
Can't wait for it to be dropped in the Yukon!
LOL. Hopefully it works 🤞
Nice work!
Thank you very much!
u suck :)
I’ve learned over the years to start at trailer wiring. 9/10 times the plug has been damaged in one way or another.
Totally agree! Thanks for the comment 😊
Wow great video very informative
Can confirm. He was happier than a 🐷 in 💩