Пікірлер

• 
  @BanthaPooDoo645 күн бұрын

  I put on haunted house shows from 94 to 2017 free for trick r treaters to enjoy in my better yrs and this is so awesome great share thanks.

• 
  @bluedakota805 күн бұрын

  @BanthaPooDoo64 thank you. We have been doing it off and on since 1984. My mom started it. It's been a family thing all these years. And the same thing we do it free for the kids and families.

• 
  @testos27017 күн бұрын

  Great video thanks for sharing!

• 
  @bluedakota807 күн бұрын

  You're welcome

• 
  @eball2129 күн бұрын

  I’ve been trying to find the model of the blue, red and yellow light bar you have. It’s in the middle row, 4th one down.

• 
  @bluedakota809 күн бұрын

  That is a Whelen library led. This one is the first generation with the colored lenes with the red, blue, or amber leds. Most you will find of this model will be all clear lenes with the red, blue, or amber leds. After i get home i can send you the model number if you would like

• 
  @eball2128 күн бұрын

  @@bluedakota80 that would be great, thank you!

• 
  @bluedakota808 күн бұрын

  @@eball212 its a LFL Liberty series Model # SX8BBRR Made 04/07

• 
  @eball2128 күн бұрын

  @@bluedakota80 you’re awesome, thank you!

• 
  @bluedakota808 күн бұрын

  @@eball212 you're welcome

• 
  @Stacknasty6921 күн бұрын

  they are all so gorgeous! nice collection!

• 
  @manzanitamurderhouse27 күн бұрын

  I can appreciate those little details, people may not notice them but its the details that sell the illusion.

• 
  @bluedakota805 күн бұрын

  @@manzanitamurderhouse thank you

• 
  @DrvibesemoАй бұрын

  Where did you get the house wrap?

• 
  @bluedakota80Ай бұрын

  Lowes. In the video, i did say house wrap. It is actually for roofs. That why it has that almost brick like print on it. You might have to ask. At my Lowes, it's on a shelf since it's only four feet.

• 
  @daved1639Ай бұрын

  Trying to restore a Public Safety Equipment Inc Model K36868 for a retiring buddy ... I'm hoping to figure out the wiring, but wondering if you happen, by luck, to have a wiring diagram for that model. I would love to get this thing working for his upcoming retirement party.

• 
  @bluedakota80Ай бұрын

  Im not sure which lightbar that is. Do you have a link so i can see what you have. Some lights, depending on the type, might need to control the box that mounts in the can to make work. Where others can work without it.

• 
  @daved1639Ай бұрын

  @@bluedakota80 Guess that may have been the serial number. It's a Code 3 MX-7000. Sorry about that ... I'll do some searches with that model number and see what I find. Anything you may be able to point me to would be appreciated! THANKS!

• 
  @bluedakota80Ай бұрын

  I have two of those bars. I can open it up and get the color codes of the wire that are in mine.

• 
  @daved1639Ай бұрын

  Appreciate the thought, but I just started testing each circuit and am figuring it out. I think I’m going to just light up the whole thing rather than make each element switchable. Thanks!!

• 
  @clarke7703Ай бұрын

  Thank you very much for the thorough breakdown. This was a very informative video my man. Saved me a lot of time. 🥰

• 
  @lablaine1981Ай бұрын

  Warning lite freak since 1949, bury me in your wall/ basement 🗣️

• 
  @justinepaula-robilliard2 ай бұрын

  The other option is the heat and beat method, heat the screws with a soldering iron, heat up the screw, let it cool, then again, a couple times, to sort of "burn" off the adhesion, the expansion should break any adhesion..

• 
  @OverKillPlusOne2 ай бұрын

  Get yourself a hand impact driver, the type you whack with a hammer. Better chance of getting those stubborn screws that are stuck due to galvanic corrosion. You can also try (counterintuitively) with the impact driving them tighter for a couple whacks just to break them loose.

• 
  @bluedakota802 ай бұрын

  Funny, i have one. Didn't think to use it. I've always had success using the clutch on the drill.

• 
  @tommytomtomt2 ай бұрын

  Amazing

• 
  @tommytomtomt2 ай бұрын

  Wow nice .btw How do you get paint off The plastic domes.. I can't seem to get mine off. There was some overspreay on and I don't wanna Ruin it by using chemicals.

• 
  @bluedakota802 ай бұрын

  A while back, i found a graffiti remover paint at Home Depot or lowes that was safe for plastics. But that was a while ago. I'm not sure if they still have it. But im sure you could find it on ebay or Amazon. The one all blue 9000 edge strobe. The guy painted the whole thing white. That's what i used to clean that whole light.

• 
  @tommytomtomt2 ай бұрын

  I use the red spray that they sell at the hobby store for model cars which is translucent and you can paint the bulbls of that. It looks perfectly like red glass.

• 
  @bluedakota802 ай бұрын

  I thought about that. Didn't think about checking a hobby store for the paint. But i found the red ones, so i just got those.

• 
  @tommytomtomt2 ай бұрын

  Epic job again

• 
  @bluedakota802 ай бұрын

  Thank you

• 
  @RexFafu2 ай бұрын

  Do you know how we can turn on the oil pressure gauge from the sctx4 tune?

• 
  @bluedakota802 ай бұрын

  Sorry, I don't know. I haven't been able to get mine to work.

• 
  @robertcornelius35142 ай бұрын

  They had several of these running during WestleMania 40. Check it out.

• 
  @ronweaver92962 ай бұрын

  Nice job

• 
  @bluedakota802 ай бұрын

  Thank you

• 
  @fullyjr52183 ай бұрын

  I've got a 15 GT premium how would I know if I have that pigtail without taking it all apart?

• 
  @bluedakota803 ай бұрын

  Unfortunately, there's no way to know that I'm aware of. I didn't know mine had it until I got to that point. Sorry, i can't be more help with your question.

• 
  @fullyjr52182 ай бұрын

  @@bluedakota80 no worries man thanks for the reply

• 
  @meyvonneg95243 ай бұрын

  Wow,its the real ghostbusters car?

• 
  @brendakempa79733 ай бұрын

  I saw your previous video where it Was stripped out

• 
  @bluedakota803 ай бұрын

  It just had so much play in the plastic gears. I know the way i did it isn't the right way. But if its just a display piece and you want to save money and time trying to find new pieces. This is an alternative way.

• 
  @les84long13 ай бұрын

  The epoxy you used. Will it get too hot and melt/liquify and then gum up the gears?

• 
  @bluedakota803 ай бұрын

  That's a good question. I used the Gorilla Glue epoxy. And it seems to be good. I haven't had any issues with it. There is also a small heat shield where it bolts in the place, which helps with the heat.

• 
  @collingray15174 ай бұрын

  That's cool

• 
  @user-wb8rq9ug1w4 ай бұрын

  Man you like the red, blue lights

• 
  @natalieanon74784 ай бұрын

  AWESOME!

• 
  @tanker74014 ай бұрын

  Do you have any recommendations for a lightbar to hang in my room I need one preferably quiet and low energy consumption

• 
  @bluedakota804 ай бұрын

  Areodynic with the sealed beam bulbs would be good. They aren't super noisy and not terrible on power usage. Or anything with LEDs. There is no sound and very low power use. Anything with rotators and halogen bulbs are going to be noisy and take lots of power. In the video the fourth row. The top and second one down. The all amber and red/blue are the sealed bean bulb style. Those would be my recommendation for what you are looking for.

• 
  @davidgriffin144 ай бұрын

  Nice job.

• 
  @jchoffman25014 ай бұрын

  Cool collection! I've always been interested in light bars since young age. 3rd one down on left is my favorite! Roscoe P. Coletrain version... YeeHaw!

• 
  @bluedakota804 ай бұрын

  Thank you, Same here. I have had an interest in them since i was young also. My most favorite is the aerodynic (roscoes light), and the all blue smith and wesson. Become grown up that's what was on the cars at that time.

• 
  @jchoffman25013 ай бұрын

  @@bluedakota80 If you ever come across an aerodynic for sale I'd love to have one of this model. Thanks JC

• 
  @bluedakota803 ай бұрын

  If i see one. The red/blues dont show up often. A lot of ambers and red/white seem to show up the most when i see them.

• 
  @guilhermedeoliveira95094 ай бұрын

  Does the gauges have to come from a premium package car for them to work with the my color function, or as long as you have the premium package the my color will work even if the gauges are from a base model?

• 
  @bluedakota804 ай бұрын

  They should work either way. I'm not sure 100%. But I know the car i got the gauges out of wasn't a premium, and the my color works in my car. So unless they did something different for certain years, i would say they should work either way.

• 
  @SouthernFarmingTV4 ай бұрын

  You can get par36 led sealed beam led . Spot beam

• 
  @memati2164 ай бұрын

  Did you have a for sale website?

• 
  @bluedakota804 ай бұрын

  No, this is my hobby and collection.

• 
  @memati2164 ай бұрын

  @@bluedakota80 oh, OK good luck brother

• 
  @Themeparknerd19934 ай бұрын

  Super cool video! Thanks for sharing.

• 
  @danbucceroni86074 ай бұрын

  I have a 2021 and just picked up a 2019 active exhaust. I was thinking of doing this. I guess 3 years ago you thought if it first lol. How is this holding up three years later ? ??

• 
  @bluedakota804 ай бұрын

  It's been work fine. I haven't had any problems with it.

• 
  @girc944 ай бұрын

  Can you do tutorial on how to wire like this. Trying to set one up in my bar

• 
  @bluedakota804 ай бұрын

  kzread.info/dash/bejne/fZqGsdGpdsvdXcY.htmlsi=zLX-65GJKUMZWPs3 This is a run-through on how i did the wiring for the lights. Let me know if you have any questions on any part, and I'll try to explain it.

• 
  @WANTEDANGELIC4 ай бұрын

  This is really cool

• 
  @joeloveland62835 ай бұрын

  I always thought it would be cool to light up a night club using lots of lightbars and beacons from old fire/PD units. It would be cool to see all this collection lit up at the same time.

• 
  @bluedakota805 ай бұрын

  If I had a large enough power supply that could do it, I would for sure. In the original Terminator, the nightclub in that movie used a bunch of beacons and aerodynic.

• 
  @damtheluck124 ай бұрын

  How did you wire these I have2

• 
  @bluedakota804 ай бұрын

  kzread.info/dash/bejne/fZqGsdGpdsvdXcY.htmlsi=5xxTEFWgUiwIPJMR @damtheluck12 check out my police lightbar power explained video. I show what i used and how i ran the power. Sorry in advance, it's a little long, but i tried to be very informative. Its a very simple setup

• 
  @grgjnsy70235 ай бұрын

  I missed the federal fb3 - amirite? killer collection.

• 
  @bluedakota805 ай бұрын

  Thank you

• 
  @shawnaburns51585 ай бұрын

  Love this❤ I'd love to get gauge clusters out of old police cars,,, especially the certified speedometer ❤

• 
  @collectgemsosrs62985 ай бұрын

  Very unique collection and i couldn't love it more!! I collect rare gemstones/minerls like tanzanite, morganites tourmalines etc

• 
  @bluedakota805 ай бұрын

  Thank you, Im sure you get asked the same questions about your collection like i do. People ask why you collect these. I say for the same reason others collect stuff like sea shells, shot glasses, spoons from other states. Everyone has a hobby that keeps them san. Sounds like a unique collection and hobby.

• 
  @Ackira5 ай бұрын

  I really would rather see those on a wall than on a car 💀

• 
  @realpiee5 ай бұрын

  you should 3D scan these and upload them! people who make the models for the multiplayer gta servers would go crazy for these kinds of things

• 
  @builtforspeed52745 ай бұрын

  Bad ass, I'm trying to do this on my 2014 good thing I checked first because I was thinking the same thing you were at first didn't knew there's a computer inside that

• 
  @bluedakota805 ай бұрын

  Stupid right. Can't just make it a simple design, can they. Hope this helps you along.

• 
  @FLBased5 ай бұрын

  My first patrol car had the Federal Signal (second from the top on the left). I hit an owl once, and it damaged the speaker grill in the middle. The mechanics zip tied it back together. Having the speaker right above your head sucked, and I remember the constant whirring of the motors vibrating through the roof, not to mention the battery drain. Fast forward, and LED's became the thing. So to be retro, I bought a blue "tear drop" light and put it on my dash. I got more than a few laughs from newer guys that had never seen them before. Good times.

• 
  @bluedakota805 ай бұрын

  They're noisy for sure. Im a volunteer fire and our grass truck or brush truck they are called both. It has an old code 3 on the roof, and that is all you can hear if the siren isn't going. The new leds are cool in their own way but will never have the same charm as an old rotator.

• 
  @Nervegas5 ай бұрын

  We had the Federal Deltas like the top left one and yea, the motor whir on those things was wild, radio could tell if you had your lights on or not whenever you went to talk lol. The strobes weren't much better with the electronic click/whine.

• 
  @FLBased5 ай бұрын

  I forgot about the popping, whine sound of the strobes. We bought the strobe bars, but only fitted a handful of our cars with them. They discontinued them pretty quick because they were expensive, and just didn't last. I didn't see it on this guy's wall, but we had a weird, oval shaped one that had the bobbling "intersection clearing" light in the middle. So, when it worked, you could hear the bobbly, rotating sound and the clicks and whirs 😂. That thing always broke and was more like a lazy eye, and the strobes always burnt out so half the bar didn't work. I only drove one car with those because it was on one of the spares when my cruiser was being worked on. I think the only good side was it had a traffic, merge- direction bar under it. ​@@Nervegas

• 
  @bluedakota805 ай бұрын

  The ovel shaped one you are talking about is probably the federal signal vista lightbar. I have one but dont have room on thatvwall for it. It's on another shelf

• 
  @FLBased5 ай бұрын

  @@bluedakota80 Ha! That's the one! I hated that thing. Great collection man...brought back some memories that's for sure.

• 
  @ESPLTD3225 ай бұрын

  If anyone wants my boring lighting information lol Fluorescents are closely related to these. These Xenon bulbs are also a form of HID, still in use on many cell phone and TV/radio towers. They instantly turn off and on and in this case strobe. They’re closely related to metal halides, which are basically mostly used for stadium lighting. Mercury Vapor, also a form of HID, are the bluer, sometimes blue/green/grayish versions of metal halide. Their advantage is they last longer than metal halide, I believe. High pressure sodium is also HID. Those are the notorious orange street lights. They made the most lumens per watt, but their color temperature could make it difficult to see a whole lot, and especially make it hard to see color, as they’re borderline mono-chromatic.

• 
  @user-cz1np6ml5z5 ай бұрын

  How many can you turn on at one time with that power supply?

• 
  @bluedakota805 ай бұрын

  With the one in the video. It all depends on what style bar. The older rotators one mybe two depending on the number of rotators in each one. The led strobes stlye five of them. It's only 10 amp, so it's not super strong.

• 
  @robertjustason71025 ай бұрын

  I have a low profile 36 inch edge I think I want to sell It’s fully loaded clear lens but leds are red when activated I was a n h fireman

• 
  @bluedakota805 ай бұрын

  Thanks for the offer. Im not really looking for any more strobe style lightbars. Im more into the old rotating lightbars

• 
  @robertjustason71025 ай бұрын

  @@bluedakota80 Ok if you hear of Someone let me know

• 
  @BoostedFL5 ай бұрын

  You are the man cool deal

• 
  @michaeljavert46355 ай бұрын

  Doesn't look bad. I just hate LED. Would be better with sealed beam rotators.

• 
  @bluedakota805 ай бұрын

  Thanks, I did the leds because, at the time, i wasn't able to find a green sealed beam bulb. These were easy to find.

• 
  @michaeljavert46355 ай бұрын

  @@bluedakota80 I understand. Those horrible LEDS are everywhere. I have to special order light bulbs because I can't get what I need at the hardware store. It's ridiculous.

• 
  @bluedakota805 ай бұрын

  I recently ordered a red one for a NY aero. One of these days, I'll see if they have greens, blues, and ambers.

• 
  @meryoun405 ай бұрын

  very, very cool video! if you'd want your flash to look a little more authentic you could try making the "off" time on the flasher about 1-2 seconds long. also curious about what product you used to clean the glass? thanks

• 
  @bluedakota805 ай бұрын

  Thank you, All i used is a glass cleaner, but the style that is a spray can. And used a toothbrush to get into all the groove. Nothing special, but it did take a couple of times to get it all.

• 
  @germarzijlstra37855 ай бұрын

  Hi.....i'm from Aruba🇦🇼....very nice collection...i have 2 Federal Signal dual rotors but amber lens so looking for red lenses...they are old school so think would be dfficult to find...i'm a medical volunteer, ex-firefighter & 911 dispatcher, & now working as a police dispatcher.....

• 
  @bluedakota805 ай бұрын

  Thank you, That's cool. I've been a volunteer FF for 11 years. Hope you can come across what you are looking for. I would suggest joining a Facebook group that is geared for that. You'll find all kinds of people that have that kind of stuff.

• 
  @germarzijlstra37855 ай бұрын

  @@bluedakota80 what is the page's name???

• 
  @bluedakota805 ай бұрын

  Federal signal aerodyic, aero twin sonic, and aerohawk collector. Thats one of them im on. And another called emergency lightbar collectors buy sell and trade