Пікірлер

• 
  @MTFILMSOFICIAL2 ай бұрын

  I can now use my BMPCC with the stabilizer it was perfect 100% stabilized thanks for your video lead time I have a problem I cannot see the image of the transmission with all its cable connected I do not see anything on the mobile with the APK, but I can control everything From the phone

• 
  @MTFILMSOFICIAL2 ай бұрын

  muchas gracias

• 
  @BlakeCDMedia2 ай бұрын

  Great video. Just got a deal on this gimbal. It's Axes, pronounced Axe-ees. Or Axe-ease. 🍻

• 
  @marcmartinezfilms2 ай бұрын

  Cool, thanks

• 
  @araminge28602 жыл бұрын

  [̲̅p][̲̅r][̲̅o][̲̅m][̲̅o][̲̅s][̲̅m]

• 
  @naturegraphyfilms95632 жыл бұрын

  Hi, I have the 6K pro and it doesn’t fit with my small rig cage at all. Is there a way out pleaseeee

• 
  @marcmartinezfilms2 жыл бұрын

  Hi, I understand the Pro is larger than the regular 6K. The 6K was already big for the Crane 3. I would imagine its too wide especially with a cage. Try mounting with no cage. Other than that I dont own the Pro so I dont think I could be much help. Good luck.

• 
  @julioblanco33012 жыл бұрын

  Dope video Bro🤘🏼

• 
  @BlitzBruiser2 жыл бұрын

  Thank you Marc, very cool

• 
  @martinkris6893 жыл бұрын

  Thank you very much for this tutorial! I really appreciated both the content and your energy, and it helped me out a lot. Blessings, Martin

• 
  @marcmartinezfilms3 жыл бұрын

  Thank you Martin. I hope it helped.

• 
  @b.maconfilmz32703 жыл бұрын

  Make it look so easy ...I almost gave up on them lol

• 
  @jcinewilliams88193 жыл бұрын

  Finally!!!!!!! My crane is not vibrating no more! Now all I have to do is update my firmware and calibrate and then I can begin learning how to use this beast!

• 
  @magsmulvey94033 жыл бұрын

  Hey Marc... I tried watching a fair few before I found you, really good class, good teacher! Thanks Pal

• 
  @marcmartinezfilms3 жыл бұрын

  Thank you. Much appreciated. Im glad it was to help.

• 
  @jbmann.85883 жыл бұрын

  GREEEEEEEAT!!!

• 
  @LinusKnight3 жыл бұрын

  Is the mount on the bottom of the CAGE that your sliding onto the gimbal plate something that comes with the Crane 3 Lab standard kit? I wanna make sure i don't need an additional mounting plate for the bottom of the camera to get it to fit.. thanks!

• 
  @marcmartinezfilms3 жыл бұрын

  Yes it comes with its own mounting plate.

• 
  @DanRamoscomedy3 жыл бұрын

  YOu saved my butt. THANK YOU

• 
  @marcmartinezfilms3 жыл бұрын

  Awesome.

• 
  @glennparker82473 жыл бұрын

  your roll axis is supposed to stay put when you move it. yours keeps rolling back to the centre?

• 
  @marcmartinezfilms3 жыл бұрын

  Yup. Perfect balance.

• 
  @glennparker82473 жыл бұрын

  @@marcmartinezfilms is it though? All the instructions I've seen say that it should stay where it is when you let it go. On your roll axis one it keeps rolling back towards the centre? I'm struggling to balance mine there as well.

• 
  @georgecraft0073 жыл бұрын

  I typically use my Crane 3 LAB gimbal with the Zhiyun monopod by using one of two transmount quick connects. When I remove the folding tripod base, I attach it to the second transmount quick connect that I've placed on the left side of the rear handle of the gimbal. This gives me better rotational control of the gimbal when mounted on the monopod, (as the folding tripod now becomes a side mounted handle). I really like this setup. I've purchased a BMPCC4K app that I like very much. kzread.info/dash/bejne/enyXxMqhXdaen7w.html I'm building a DIY vest/arm setup as seen in the following video. kzread.info/dash/bejne/eoenxZWimNWWiqw.html

• 
  @andydporter51363 жыл бұрын

  The word rhymes with TREES and FLEAS and BEES, not the Access Hollywood bus.

• 
  @davidboerst47894 жыл бұрын

  you forgot zoom/focus wheels. has anyone been able to control the bmpcc through the handle?

• 
  @marcmartinezfilms4 жыл бұрын

  David Boerst I cover the zoom/focus in a separate video.

• 
  @davidboerst47894 жыл бұрын

  @@marcmartinezfilms thanks. I am still unable to control the iso,f-stop and shutter thru the handle (the app can control it tho). Any thoughts?

• 
  @marcmartinezfilms4 жыл бұрын

  David Boerst as far as I know there is no camera control for the BMPC’s through a cable on this gimbal . Only Bluetooth.

• 
  @davidboerst47894 жыл бұрын

  @@marcmartinezfilms yeah I reached out to the company. They may do a firmware update for it in the future but as of right now there's nothing

• 
  @marcmartinezfilms4 жыл бұрын

  David Boerst good to know thanks

• 
  @dylangintherofficial4 жыл бұрын

  Thanks for actually explaining wht u have like the small rig cage most ppl forget to mention this

• 
  @VVIPWORLDUSA4 жыл бұрын

  Very thorough, thanks!!!

• 
  @juanpais10964 жыл бұрын

  good tutorial, very helpfull!

• 
  @halleberry20944 жыл бұрын

  beautiful footage of that dancer.

• 
  @marcmartinezfilms4 жыл бұрын

  Thank you!

• 
  @mc33productions554 жыл бұрын

  Mark! Just got the Crane 3 Lab. How the hell do you connect the BMPCC4K to the lab? Ive connected using the USBC to the camera control system and nothing happens. HELP! also if im using a SSD that already uses the USB C how do I connect that as well. Ive checked everyone online and can't find an answer. Thanks in advance and hope you can help!

• 
  @marcmartinezfilms4 жыл бұрын

  MC33 Productions the usb port is for storage media. There is no wired camera control. For camera control I use an app you can find info at 10:32 in the video. For image transmission use the HDMI port on the Pocket 4K to the HDMI port on the Lab 3. Then follow the instructions and connect using Bluetooth. Good luck!

• 
  @cinema-q4 жыл бұрын

  What was your experience actually using the follow focus while operating the gimbal? That was what I was most interested in since the Crane 3 doesn’t seem ergonomically set up to do that very well. Any insight would be appreciated!

• 
  @marcmartinezfilms4 жыл бұрын

  ShelbyWorks the follow focus should be named something else. You can NOT follow focus a subject. Theres is major latency so you tend to overshoot and then back up and overshoot again. I have my focus peaks turned all the way up and still cant land it. The focus wheel has no hard stops either it just goes on forever. I use for the iris wheel on prime lenses now. I just invested in the nucleus nano and a separate wireless video setup for follow focus completely defeating the purpose of the focus wheel. The zoom rocker comes is handy on zoom lenses. Hope that helps.

• 
  @cinema-q4 жыл бұрын

  Marc Martinez Marc Martinez wowww that’s really good to know. I dont see any videos mentioning this and I’m shocked that that is the case. Really appreciate it 🙏🏾

• 
  @kennethjames57894 жыл бұрын

  Thank you for the video.Good Job!

• 
  @marcmartinezfilms4 жыл бұрын

  Kenneth James thank you!

• 
  @skymagician81204 жыл бұрын

  Hi Marc Hope youre safe and well. Quick question: What’s the best gimble for BMPCC4K whilst the CORE SWX POWERBASE EDGE battery is stuck on? Thanks in advance Is the crane lab 3 a good gimble for the BMPCC4K and can it be attached whilst the core powerbase battery pack is attached underneath the camera?

• 
  @marcmartinezfilms4 жыл бұрын

  SKY MAGICIAN thats a good question. Unfortunately I have no experience using the powerbase. The problem with those bottom mounted power bases is that it raises the height of the cam and on a gimbal it could hit the rear motor when going into a low angle shot. Another con is the additional weight. It gets heavy after a while and any additional weight on the gimbal you will begin to feel and it gets exhausting. I switch out bats, I have 7 bats that last a day’s shoot. I dont mind switching them out. Id rather do that than deal with the headache of balancing, shot limits, and extra weight. Rule of thumb, keep your cam and gimbal as lightweight as possible. It makes it easier to handle as well as setup, especially on a gig. Im not saying it cant be done. I’m just saying for myself its not worth it on a gimbal setup. On a tripod for sure, all day.

• 
  @seanbarcoe97744 жыл бұрын

  Hi Marc, I have almost same setup except I am using smallrig cage. On your previous video I see that you offset the camera. Once I did the my Zoom on the Right side (as your shooting) will not reach the lens. Im using a Cannon EF16-35. What am I missing? Thanks

• 
  @marcmartinezfilms4 жыл бұрын

  I put both motors on one side. Also, if you use the Smallrig half cage you wont need to offset the mount.

• 
  @seanbarcoe97744 жыл бұрын

  @@marcmartinezfilms I am using full cage I will try to put both on same side. Thanks for reply!!

• 
  @joesheridan81354 жыл бұрын

  Do you use a different mounting plate than the one provided by the gimbal? Thanks

• 
  @marcmartinezfilms4 жыл бұрын

  I use the same hardware it comes with.

• 
  @very90004 жыл бұрын

  Hey. help me. when I rotate the zoom focus, I hear a sound in the form of a click and the zoom ring does not reach the end. what do you think is the problem? I can throw a video.

• 
  @marcmartinezfilms4 жыл бұрын

  Cергей Вернега double check the marking on your lens to make sure you aren’t reaching the end of the throw. If it still does it before reaching the end disengage the motor hear and see if still does it. If it still does it I would recalibrate the motors.

• 
  @very90004 жыл бұрын

  Marc Martinez can motors be calibrated? how to do it ? help 🙏🙏

• 
  @marcmartinezfilms4 жыл бұрын

  @@very9000 www.zhiyun-tech.com/download/en

• 
  @very90004 жыл бұрын

  Marc Martinez Hey. help me. when I rotate the zoom focus, I hear a sound in the form of a click and the zoom ring does not reach the end. what do you think is the problem? I can throw a video.

• 
  @very90004 жыл бұрын

  Marc Martinez SAY, CALIBRATING A FOCUS SERVO DRIVER CAN REMOVE CLICKING SOUNDS AND SCROLLING WHEN RINGING A RING? DO YOU HAVE A WhatsApp? my whatsap is attached to the number 89241818690.

• 
  @6634 жыл бұрын

  Thanks, but I can't get my head around how you managed to attach focus and zoom motors since the blackmagic is offset to the left so it would fit and not bump the motor! :(

• 
  @marcmartinezfilms4 жыл бұрын

  Misha Panov the motors sit far out in front on a zoom lens. A bit trickier on fixed lenses. Ive gotten around it by adjusting the plate that secures the the motors.

• 
  @6634 жыл бұрын

  @@marcmartinezfilms Thanks for the reply, Is it possible to use motors on prime lenses?

• 
  @marcmartinezfilms4 жыл бұрын

  Misha Panov yes absolutely.

• 
  @DJDennisLee4 жыл бұрын

  Hey guys, I stuck with the following problem: How to pair a Crane 3 Lab and record video to an SSD at the same time? Both run over the USB-C, but BMPCC4K has only 1 port. Is it possible to use a hub or a splitter? Any advises?

• 
  @marcmartinezfilms4 жыл бұрын

  For monitoring Use the hdmi port on the Pocket 4K to connect to Crane 3 then pair Crane 3 to your phone with Bluetooth.

• 
  @DJDennisLee4 жыл бұрын

  Unfortunately it will be not possible to control the settings like ISO, shutter as well as the Rec-Button which is very important.

• 
  @marcmartinezfilms4 жыл бұрын

  Dennis Lee it is very possible. I cover camera control in the gimbal here. kzread.info/dash/bejne/ZIKOzbiJj9PMlNI.html

• 
  @DJDennisLee4 жыл бұрын

  @@marcmartinezfilms You speak about the control of the camera over an iPhone app, bubt my question was about the gimbal. It can be connected to the camera over the USB-C and controlled via the Zhiyun Crane. But since the USB-C is already used by the SSD my question was if there is a possibility to use an USB-C hub? I summarize: how to use the REC-button on Crane while having a SSD plugged into the only USB-C port of BMPCC4K?

• 
  @marcmartinezfilms4 жыл бұрын

  Dennis Lee as far as I know the pocket 4k or 6k does not support camera control over wire. Its a pain every time I have to hit record and stop. I just recently had a second person (ac) control start stop on the app for a music video I just shot.

• 
  @marciorcostaoficial4 жыл бұрын

  Marc, thank you very much for your master class .... I am very excited about the results .... let's rock!

• 
  @lzafar4 жыл бұрын

  Are you able to control the fstop from inside the bmpcc?

• 
  @marcmartinezfilms4 жыл бұрын

  lzafar for the sigma 18-35 yes.

• 
  @lzafar4 жыл бұрын

  Marc Martinez thank you!

• 
  @lzafar4 жыл бұрын

  This was the most helpful information on KZread for the Zhiyun/bmpcc combo!! Thank you

• 
  @marcmartinezfilms4 жыл бұрын

  lzafar im glad it helped.

• 
  @festivaldayfilms4 жыл бұрын

  Thanks for making this video. Do you think this setup could work with the new Blackmagic battery grip underneath the camera?

• 
  @marcmartinezfilms4 жыл бұрын

  Ric Rawlins I would imagine the extra height would bump the camera into the rear motor for the tilt axis. As it is you have to set it far back on the plate to balance a zoom lens. It will also offset the center of gravity and make it harder to balance. Not to mention the added weight that starts getting heavy on long takes. Too many cons imo. I would recommend against it. I switch out batts. Its easy access and takes ten seconds. It allows the pocket 4K to work with the Crane 3 freely and lightweight.

• 
  @festivaldayfilms4 жыл бұрын

  @@marcmartinezfilms Thanks for the advice Marc, much appreciated.

• 
  @zudhanproductions78874 жыл бұрын

  I’ve just bought and installed both the follow focus servo and the zoom servo. When I connect either one of the two, it works fine, but when I connect both at the same time, only the zoom servo works through the handle rocker. The follow focus doesn’t work. The wheel doesn't do anything. I’ve tried in both movie mode and manual mode and I still have the same issue. I have also set the lens to both AF and MF and I still have the same issue. My gimbal is attached to the Sony a7iii with a Sony 24-105 lens. Any advice on what could be wrong here?

• 
  @marcmartinezfilms4 жыл бұрын

  ZuDhan Productions check out the tips at 2:58 in the video. This covers that exact problem. There’s a link in the description to Zhiyun’s setup for the motors as well. Good luck.

• 
  @zudhanproductions78874 жыл бұрын

  Marc Martinez thanks, I’ll watch it.

• 
  @zudhanproductions78874 жыл бұрын

  @@marcmartinezfilms I watched both videos and followed the instructions. I started with the follow focus upgrade, which worked just fine. BUT there is no option to upgrade the zoom servo. The menu only offers motor (low, medium, high), wheel (sensi, AB point, priority), joystick (reverse), rocker (sensi, AB point, reverse), calibrat (yes, no), angle (pitch, roll), focus (lite, max), and about. There is no dedicated option for zoom as there is for the focus. So I still have the same problem. When the follow focus servo is the only one connected, it works fine. But when I connect the zoom servo, the follow focus servo doesn't work, only the zoom.

• 
  @marcmartinezfilms4 жыл бұрын

  @@zudhanproductions7887 Disconnect the zoom motor completely (important). Make sure under 'Focus' it's set to 'Lite'. Click the menu wheel to the right to enter 'Upgrade' and update it again even if you already did. Disconnect it then connect the zoom motor. Go to 'Focus' again and do the same only make sure you set it to 'Max'. Update it. Test it out it should work.

• 
  @marcmartinezfilms4 жыл бұрын

  Very important you disconnect the cables and update one at a time. Hope that helps.

• 
  @antoniom.95204 жыл бұрын

  Thanks so much for walking us thru the balancing setup!

• 
  @marcmartinezfilms4 жыл бұрын

  I'm glad it helped. I posting a new tut and footage for the Pocket 6K and Crane 3 soon if you're interested in that.

• 
  @antoniom.95204 жыл бұрын

  Great tutorial bro thanks so much! Please continue to post video footage with your setup great stuff!

• 
  @jamilwtw78004 жыл бұрын

  what’s the diff between the lanparte cage and like the smallrig cage on amazon? there’s a huge price difference i’m just wondering how much of a difference in quality there is for using it with a gimbal like this

• 
  @marcmartinezfilms4 жыл бұрын

  JamilWTW the differences are small and not worth the price difference. I have a Smallrig half cage that makes the setup way easier. Live and learn. I’m posting a vid for that with the P6K soon.

• 
  @Techaton4 жыл бұрын

  @mark martinez how did you have the focus the whole time while moving? were you using the focus wheel or did you focus on the target before hand and just kept the same distance?

• 
  @marcmartinezfilms4 жыл бұрын

  TechFive good question. If I know the subject will be moving to and away from the lens I will decrease my depth of field buy stopping down the iris and increasing the iso and/or shutter angle to compensate for more light.

• 
  @lionceau218004 жыл бұрын

  hi i bought a counterweight like yours by your link but which one is under the big counterweight? i don't know where to find one...because i can't use my counterweight without it...thank you for an answer

• 
  @marcmartinezfilms4 жыл бұрын

  Hey Bryan, things have changed since I posted that video. I'll be uploading an updated one. For now all you need can be found here. Good luck! www.smallrig.com/stabilizers/zhiyun.html

• 
  @angelgcastro14 жыл бұрын

  Since the camera is now offset is really hard when adding the follow focus and zoom kit though!

• 
  @thepicturesphactory94334 жыл бұрын

  Can we use panasonic gh5s with sigma 18-35 in crane 3 LAB with zoom and focus wheel motor sir

• 
  @omobolajiopakunbi57074 жыл бұрын

  Beautiful content. Thank you for doing this.

• 
  @williamsnyder43614 жыл бұрын

  I was wondering if you had any tips on balancing the roll axis? I found that the roll axis would balance horizontally but anytime I lifted it up it would tip back down to horizontal rather than staying in one place. The only way I got the roll axis to balance properly is to change the tilt axis but then it would ruin the tilt. Would love to know what you did! I've also been having issues where the BMPCC4K is seemingly too top heavy and I don't have enough slack to even balance it!

• 
  @marcmartinezfilms4 жыл бұрын

  William Snyder the best tips I have are in this vid bud. I cover the roll axis and the slack for mounting the Pocket 4K.

• 
  @bogman1924 жыл бұрын

  im using the bmpcc 4k camera as well with the crane 3 but with the panny 12-35 - with yer lens did you feel you had to mess with motor strengths and axis settings for each motor? Or they were all fine out of the box?

• 
  @marcmartinezfilms4 жыл бұрын

  Kevin Baggott they have 3 default settings, low, medium and high. I tested them all. The high setting works fast but depending on usage the motors will overheat and turn off. Best setting for me has been on medium. Works great for hours.

• 
  @bogman1924 жыл бұрын

  @@marcmartinezfilms I appreciate that. Thanks.

• 
  @lionceau218005 жыл бұрын

  My smallrig full cage don't feet...why ? i can't put the plate !

• 
  @bogman1925 жыл бұрын

  awesome video - thanks for taking the time to do this!

• 
  @marcmartinezfilms5 жыл бұрын

  Thank you Kevin.

• 
  @bogman1925 жыл бұрын

  New to your channel - awesome video. Thanks so much.

• 
  @raymarphotography6675 жыл бұрын

  I have the Rode Film Maker Kit as well but couldn't hook it up to my BMPCC 4K. Any help?

• 
  @marcmartinezfilms5 жыл бұрын

  You will need to go out of the Rode receiver into a mini jack to XLR converter www.amazon.com/dp/B000Y021NA?tag=amz-mkt-saf-us-20&ascsubtag=1ba00-01000-a0069-mac00-other-nomod-us000-pcomp-feature-pcomp-wm-3-wm-8-wm-1-wm-4&ref=aa_pcomp_prc1 then to an XLR to mini-XLR converter www.amazon.com/gp/product/B01JTVM5JY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 to go into the BMPCC4K.