I keep locking myself out of my room and definitely domt have the right tools but ill keep yall updated on if i can get into my room
@donasinviengxay78038 күн бұрын
Wats the kit called on amazon
@SummerForler11 күн бұрын
How do you pick the deadbolt if you don't have a tension wrench or a rake?
@juanmapagan394729 күн бұрын
Thanks!!
@krzysztofjezyna2215Ай бұрын
You are my King!!! Thanks!
@MadeForStructureАй бұрын
All the people trying to rob loved this
@earlewadlington7746Ай бұрын
Good Hack bro! Saved me a lot of work👍🏿
@beardhard6500Ай бұрын
Dude this video just saved my day, and saved me so much frustration. Sometimes it's the simple solutions, great vid,helpful tip
@gwenturo95502 ай бұрын
Was watching this trying to help my gf get back into her house, you were right, I was being too forceful with my tension... Then again maybe I just got lucky
@locknut53822 ай бұрын
That's a lovely, easy lock, with a sloppy core. Not bad for practicing with.mThen you can progress to more paracentric locks with narrower keyways, much better manufacturing tolerances, security pins and so on. (Sparrows sell some really useful practice tools and high quality picks and levers, if you're interested.) One secret is to have a selection of really good levers in different sizes and thicknesses, for different lock types. You can make your own very easily. I use discarded windscreen wiper blades for some of them. The rake which you put aside in the video will open a good many different locks very quickly, sometimes more quickly than using a key. And many locks need picks with different tips and thicknesses. Those things come later, if you're practicing. Another secret is to practice daily. There is no substitute for regular effort. You can become 'rusty' very quickly; within a few days.
@kristovatlas2 ай бұрын
I like the 2x4.
@user-mn5rn9sv5p2 ай бұрын
good video! = aspiring burglar
@Pulsefiremynuts3 ай бұрын
This is my exact deadbolt ig its time to upgrade lol
@blueseakiller3 ай бұрын
I hope your wearing a mask. Plus please put gloves on that fiberglass is a pain jn the ass to get out of your skin
@Lynn-er9yx3 ай бұрын
How many pins are there in that lock?
@hi8tus7073 ай бұрын
Great video man, subbed 🤙🏼
@johnfilardi3 ай бұрын
So for every cut you make you have to add an extra 5/8 of an inch and how much should I leave for the overlap of foil paper 4 inches is enough
@richardbenson67454 ай бұрын
At a point where the lenses of my glasses are locked behind a deadbolt and my keys are a few states away. I have a book about lock picking (also behind same deadbolt 😅) honestly this has been the most helpful anything for my learning ability & now confident i can now get past this issue without my drill thank you so, soo much. P.s. love the intro XD flawless
@Faith_First0014 ай бұрын
Worst 30 seconds of my life. No point. Thanks
@Faith_First0014 ай бұрын
I’m told NOT to use WD40 on your shifter like that. Eats away at it eventually
@howtodothings84154 ай бұрын
The wd40 removes all the old grease. I rinse the wd40 out with liquid wrench.
@warrenpinkett78754 ай бұрын
I literally picked my first lock while being locked out just by watching this. Thank you!
@blueeyesbeckah14285 ай бұрын
What is the name of this kit ?
@farhanwaheed4175 ай бұрын
hi how can I order from which website
@Jonacarpenter5 ай бұрын
I have a question…. This video is quite old …. Are you still monitoring your channel? Great video by the way. Good timing, right to the points, and. Not filled with not needed information. 👍👍 If you’re still taking questions let me know and I’ll ask. Take care.
@keriwhisenand39575 ай бұрын
Where can i buy this at
@tattoolimbo5 ай бұрын
The amazon link for the pick set is no longer viable
@webtraveler48135 ай бұрын
Ha. Mine is doing the exact same thing. Thanks for the video.
@yahmimoore55146 ай бұрын
I needed this because my mom took my phone away and locked it in her room currently using a laptop
@sleepyjoe5636 ай бұрын
amazing!
@deantaylor38986 ай бұрын
Buy the machine......
@onlyulee8667 ай бұрын
How do you do outside dimension?
@howtodothings84157 ай бұрын
The total width of the duct will be 3 inches larger than the inside dimensions. So if the duct is supposed to be 16”x12” the outside will be 19”x15”. This is because the duct board in this video is 1 1/2” thick. Add the two sides or the two top and bottom together and you get 3 inches. If you need the outside of the duct to be 20”x10” then you will need to find the inside dimensions to make the cuts. In this example you would subtract 3 inches from both the 20” and the 10” and your inside dimensions would be 17”x7”. Then follow the directions in the video to cut the duct board. Hope this helps!
@howtodothings84157 ай бұрын
Remember, everyone cuts with a little different pressures on their cutting tools. It may end up being a little off. Adjust accordingly.
@onlyulee8667 ай бұрын
Do you still use the right side as your mark
@vespertinist7 ай бұрын
Ha! That’s the exact same credit card I have 😊 perfect! 🍸
@aitobaebaruku33177 ай бұрын
Thanks man, really helpful.
@juneporter29438 ай бұрын
I'd break a window anyday this world is bad enogh
@juneporter29438 ай бұрын
For all you new theives this is NOT right WTF?
@chrismarston33239 ай бұрын
I’m praying I can get this to work, my roommate left for the weekend and his alarm has been going off for over an hour. If not I’m busting in his door
@hidayahghani37259 ай бұрын
If there’s a delay in my tools arriving can you pls make a video with the same lock but picking into it with anything else in the house for example Bobby pins??
Hey got a doubt mate, will I be able to separate the brake lever from the shifter cause I want to upgrade my brakes to hydraulics and want to same some money on those shifters.
@randomaussie19899 ай бұрын
Wow thhx I have a new skill😊
@ClayLuxe9 ай бұрын
this is so helpful!
@howtodothings84159 ай бұрын
Glad you think so!
@sleepyjoe5639 ай бұрын
I need to do this.
@howtodothings84159 ай бұрын
Get to it, Joe.
@howtodothings84159 ай бұрын
Thanks for watching! Help me get to 5k subscribers!
@frankmoran455610 ай бұрын
Who the fuck wants the door open? I'm tired of my door being open
@howtodothings841510 ай бұрын
I open my doors when the roomba vacuum is in operation. You can close your door if you wish.
@vexymous10 ай бұрын
For more door stopper content 😂😂
@howtodothings841510 ай бұрын
Don’t forget to subscribe! 😏😏
@ObossiteMenya10 ай бұрын
Damn
@howtodothings841510 ай бұрын
😏😏😏
@bladrbrettel651110 ай бұрын
I don't have those kind of door stoppers 😉 and some of my doors don't go to tbe wall like that (in the middle of the room) so not usefull in my case 😉
Пікірлер
I keep locking myself out of my room and definitely domt have the right tools but ill keep yall updated on if i can get into my room
Wats the kit called on amazon
How do you pick the deadbolt if you don't have a tension wrench or a rake?
Thanks!!
You are my King!!! Thanks!
All the people trying to rob loved this
Good Hack bro! Saved me a lot of work👍🏿
Dude this video just saved my day, and saved me so much frustration. Sometimes it's the simple solutions, great vid,helpful tip
Was watching this trying to help my gf get back into her house, you were right, I was being too forceful with my tension... Then again maybe I just got lucky
That's a lovely, easy lock, with a sloppy core. Not bad for practicing with.mThen you can progress to more paracentric locks with narrower keyways, much better manufacturing tolerances, security pins and so on. (Sparrows sell some really useful practice tools and high quality picks and levers, if you're interested.) One secret is to have a selection of really good levers in different sizes and thicknesses, for different lock types. You can make your own very easily. I use discarded windscreen wiper blades for some of them. The rake which you put aside in the video will open a good many different locks very quickly, sometimes more quickly than using a key. And many locks need picks with different tips and thicknesses. Those things come later, if you're practicing. Another secret is to practice daily. There is no substitute for regular effort. You can become 'rusty' very quickly; within a few days.
I like the 2x4.
good video! = aspiring burglar
This is my exact deadbolt ig its time to upgrade lol
I hope your wearing a mask. Plus please put gloves on that fiberglass is a pain jn the ass to get out of your skin
How many pins are there in that lock?
Great video man, subbed 🤙🏼
So for every cut you make you have to add an extra 5/8 of an inch and how much should I leave for the overlap of foil paper 4 inches is enough
At a point where the lenses of my glasses are locked behind a deadbolt and my keys are a few states away. I have a book about lock picking (also behind same deadbolt 😅) honestly this has been the most helpful anything for my learning ability & now confident i can now get past this issue without my drill thank you so, soo much. P.s. love the intro XD flawless
Worst 30 seconds of my life. No point. Thanks
I’m told NOT to use WD40 on your shifter like that. Eats away at it eventually
The wd40 removes all the old grease. I rinse the wd40 out with liquid wrench.
I literally picked my first lock while being locked out just by watching this. Thank you!
What is the name of this kit ?
hi how can I order from which website
I have a question…. This video is quite old …. Are you still monitoring your channel? Great video by the way. Good timing, right to the points, and. Not filled with not needed information. 👍👍 If you’re still taking questions let me know and I’ll ask. Take care.
Where can i buy this at
The amazon link for the pick set is no longer viable
Ha. Mine is doing the exact same thing. Thanks for the video.
I needed this because my mom took my phone away and locked it in her room currently using a laptop
amazing!
Buy the machine......
How do you do outside dimension?
The total width of the duct will be 3 inches larger than the inside dimensions. So if the duct is supposed to be 16”x12” the outside will be 19”x15”. This is because the duct board in this video is 1 1/2” thick. Add the two sides or the two top and bottom together and you get 3 inches. If you need the outside of the duct to be 20”x10” then you will need to find the inside dimensions to make the cuts. In this example you would subtract 3 inches from both the 20” and the 10” and your inside dimensions would be 17”x7”. Then follow the directions in the video to cut the duct board. Hope this helps!
Remember, everyone cuts with a little different pressures on their cutting tools. It may end up being a little off. Adjust accordingly.
Do you still use the right side as your mark
Ha! That’s the exact same credit card I have 😊 perfect! 🍸
Thanks man, really helpful.
I'd break a window anyday this world is bad enogh
For all you new theives this is NOT right WTF?
I’m praying I can get this to work, my roommate left for the weekend and his alarm has been going off for over an hour. If not I’m busting in his door
If there’s a delay in my tools arriving can you pls make a video with the same lock but picking into it with anything else in the house for example Bobby pins??
kzread.info/dash/bejne/dKKHmM6eeMmoYsY.htmlsi=Qxf8_w2x8iZhZcwt
I got my pick tools off ebay.
Thank you very much.
Hey got a doubt mate, will I be able to separate the brake lever from the shifter cause I want to upgrade my brakes to hydraulics and want to same some money on those shifters.
Wow thhx I have a new skill😊
this is so helpful!
Glad you think so!
I need to do this.
Get to it, Joe.
Thanks for watching! Help me get to 5k subscribers!
Who the fuck wants the door open? I'm tired of my door being open
I open my doors when the roomba vacuum is in operation. You can close your door if you wish.
For more door stopper content 😂😂
Don’t forget to subscribe! 😏😏
Damn
😏😏😏
I don't have those kind of door stoppers 😉 and some of my doors don't go to tbe wall like that (in the middle of the room) so not usefull in my case 😉
Thanks for watching! 😃
Awesome tip!!
Thanks for watching!
Thats slick