Пікірлер

• 
  @user-wp9mzКүн бұрын

  I'm running ads on my x max and my xrt and those LiPO batteries are Traxxas batteries that are only 25 C why do you think they go so low on their sea rating I'm just wondering because x-maxx and xrt run hard I never noticed the battery pack get warm or puffy yet I'm charging an 8000 me 130 C 15.2 volt lipo in my Redcat I have the amps set at 13.4 amp charge rate do you think that is okay for charging?

• 
  @kennethwebb7922Күн бұрын

  Guys I've got one but I can't get on beta or clean flight I can't download the old version even on a Google chrome laptop what can I do iv git6 the 90 too same again I'm newish to drones do I flash it can anyone help me love from UK cheers guys.

• 
  @hendriegrimberg50162 күн бұрын

  Big thanks for the serie it helps alot

• 
  @Dynaglide92rc9 күн бұрын

  hello , I need some advice . I have this same Heli . When I spool it up to take off , it want's to tip over on it's left side . I given it some clicks to the right but it's not helping ?

• 
  @Dynaglide92rc9 күн бұрын

  hello , I need some advice . I have this same Heli . When I spool it up to take off , it want's to tip over on it's left side . I given it some clicks to the right but it's not helping ?

• 
  @_google_user_12 күн бұрын

  I'd use high temp copper personally.

• 
  @nerdvsgravity138727 күн бұрын

  Why do you need to disconnect one of the red wires?

• 
  @nerdvsgravity138727 күн бұрын

  Wow this was soooo helpful. I have an old redcat wendigo RC car laying around. The car its self is built poorly and parts on the drivetrain keep breaking. However, the electronics are still good, so I was thinking of buying another motor and esc and converting my longboard to an eskate since I also have some spare eskate stuff. I wasn’t sure it was possible but now it seems like it may work

• 
  @jbonnell1117Ай бұрын

  How do I log onto the questionnaire

• 
  @lukewilkins1190Ай бұрын

  FKN LEGEND MATE

• 
  @Dynaglide92rcАй бұрын

  Hello , Could you tell me why my large gear is turning but no matter what I try , The bottom gear which is the drive gear won't turn. What could I be doing wrong. This is my first Heli . Thanks .

• 
  @Ricky-ju9msАй бұрын

  It makes perfect sense, thanks for clearing it up!

• 
  @gabrielnunes159Ай бұрын

  Are you sure? Because I got a battery GNB HV 120/240 C and seems like it damaged my ESC (speedybee F405 55A). One of the 4 ESCs of the 4 in 1 ESC sometimes work and sometimes don't after I used this battery. I saw a video from JB saying the opposite. Thanks in advance for your return.

• 
  @beominh8308Ай бұрын

  Can this apply to a tank?I'm new in RC

• 
  @butchf.46562 ай бұрын

  Hello, Can you help get me to your video to setup my Trex 450 Heli with flybar on a DX9?

• 
  @fernandaweber11372 ай бұрын

  no se ve nada

• 
  @reganburree97622 ай бұрын

  some really good videos i wonder if you can help me i have a DX9 Transmitter i am trying to bind it to my night radion 2.0 glider which has a AR630 receiver in it when i bind it i can get the rudder to work but not the motor i have tried the spektrum website but no help i,m not sure what else to try i am a complete novice and would really appreiciate some help thank you .

• 
  @serviceoverself23752 ай бұрын

  I can't believe more users did not give you more thumbs up. Your presentation is amazing.

• 
  @serviceoverself23752 ай бұрын

  Amazing!!! Thank you for your help.

• 
  @antoniobertollo85652 ай бұрын

  What does C mean if i want to calculate to ampers? Where can I find it on the product description?

• 
  @bluecavemen3 ай бұрын

  What elevator?

• 
  @windsurfingphd3 ай бұрын

  Good video, covering the motor and prop selection. However, I wish you would have provided references how you came up with these formulas for prop diameter, pitch and rpm. You also didn't indicate the stall and pitch speed (or advance ratio) for a successful flight. Did you, for example, compare your findings with ECalc to see if there are discrepancies?

• 
  @charlesmyers97653 ай бұрын

  Is this tx dsmx compatible?

• 
  @WahyuCaca-qq7xr3 ай бұрын

  ❤😊

• 
  @johnraylangstonjohnraylang59243 ай бұрын

  HELLO I have a Taylorcraft. It has no flaps. I want to use the aileron for take off flaps. Once in the air I can switch off the flap switch. Again it's a Eflite Taylorcraft N4417B. Using the DX6I TRANMITTER.ANY HELP. Thanks

• 
  @johnraylangstonjohnraylang59243 ай бұрын

  Hello I fly a Eflite Large Taylorcraft. It has no flaps . How can I use the aileron for take off flaps once in the air I can switch off the flaps switch. The transmitter is the same as your using in this post. DX6I. Just asking do you know hiw to set it up that wY. Thanks

• 
  @MeTheMan32023 ай бұрын

  So I have a 5200 mah battery with 80c. Your calculations are telling me my amperage is 416 amps. Idk if that’s right.

• 
  @brianreardon77003 ай бұрын

  Thanks so much for this.. got back into hobby few months ago still learning did not want to hurt my arrma outcast !

• 
  @TheTMaxxMan3 ай бұрын

  You are saying that I have spent hours watching these videos, and I don’t get to see it run?

• 
  @TheTMaxxMan3 ай бұрын

  Son of a Gun wipes on the tires and wheels. You’ll thank me!

• 
  @TheTMaxxMan3 ай бұрын

  Dude! Your receiver box is the size of a bushel basket. Your receiver is the size of a peck basket. Why not just tuck the wires inside the receiver box, and skip all the soldering? It would be a lot quicker, and definitely a lot easier.

• 
  @TheTMaxxMan3 ай бұрын

  Skid plates are cheap! Why didn’t you replace the one on the rear?

• 
  @TheTMaxxMan3 ай бұрын

  I’ve had a few basket cases I’ve purchased and put back together, but fortunately, I’ve never had one this bad.

• 
  @very90003 ай бұрын

  Привет 🤝 Какой порт питания ?

• 
  @very90003 ай бұрын

  Привет 🤝 Какой порт питания ?

• 
  @serroxat4 ай бұрын

  Thanks mate for your help I ilke to connect 2 160A ESC with 8S battery for 1/5 scale RC car

• 
  @Rcjamaica8764 ай бұрын

  Can someone tell me where to get ehe specific y adapter please and thanks ..yes 10 years later this video is helping ..just got into the hobby ..so im learning very very fast

• 
  @chriswhite98594 ай бұрын

  Great explanations

• 
  @citytouchstudios11444 ай бұрын

  Can I just use an adapter xt30 to xt60

• 
  @chriswhite98594 ай бұрын

  Great videos. Very helpful. Thanks 😊

• 
  @yashnivalkar11315 ай бұрын

  I have one battery of mini RC Heli of 1S 3.7v And 300mAh and I bought new battery 3.7v And 500mAh thinking it will give me more fly Time but it just wont work. It stops immediately I think it has something to do with these C rating. Can I change C rating by manipulating circuit on battery?

• 
  @danhill93175 ай бұрын

  Q😅

• 
  @danhill93175 ай бұрын

  Q😅i0

• 
  @johnnymckissick27355 ай бұрын

  So im running a 190amp motor with a 150 amp esc 🤦‍♂️ makes alot of sense now why it keeps cutting out.

• 
  @codycastro80835 ай бұрын

  My Diff are sealed can I still use grease instead of oil

• 
  @RcHelpDotCom5 ай бұрын

  If it is a true sealed diff, such as on a Mugen 1:8th scale buggy, then you will need to use the appropriate oil rather than grease. At least I would. On those diffs, you can use oil viscosity to tune how the vehicle turns. Some of the oil is almost like great and very thick. But I would definitely stick with what the manufacturer recommends.

• 
  @codycastro80835 ай бұрын

  Thank you so much for the reply back. I have T-Maxx 3.3 and yes the diff are sealed. Now I just need to figure out the recommended oil for the front, middle, rear. I don’t do anything special with it I just drive it around the the front yard an on the road.

• 
  @very90005 ай бұрын

  Hello. You didn't want to set the elevator to 7 degrees?

• 
  @very90005 ай бұрын

  Hello. You didn't want to set the elevator to 7 degrees?

• 
  @maximuskodrrata26975 ай бұрын

  Great sir!. why dont you use silicon fluid for the differential ?

• 
  @funflyingfools33275 ай бұрын

  I just finished setting up my 3gx. Took me forever it seemed like to get it tuned but I finally got it. I think the last update I did was 3.1. I don’t have an old enough computer to check. Anyway my trex 500 is flying great again. I am using elrs and that was a challenge all on its own but I got it figured out.