Пікірлер

• 
  @user-nn4xd5lt7o4 ай бұрын

  I bought a used husqvarna 346 xp ne comes with sugihara 18 inches bar and im impress with that japanese brand its lightweight but super durable compered to my stihl diamond on tip recommend this bar too

• 
  @gburwash01 Жыл бұрын

  I assume you have had this saw for a while now. How do you like the long term ownership of it?

• 
  @johannesknoll6632 Жыл бұрын

  Why heave you dellet the decompression ventil

• 
  @DAVIDZ-vk4yv Жыл бұрын

  what does the prel or preg mean behind the 5000?

• 
  @tekuhnjr Жыл бұрын

  PREL=Professional Series saw with .325" chain. PREG=Professional Series saw with 3/8" chain.

• 
  @alexdelgado3763 Жыл бұрын

  Ojalá comentar en español

• 
  @jody3385 Жыл бұрын

  I’ve bought about 4 of these husky xp all had hot restart issues here in Florida... old husky’s were so good my fix was buy a new Stihl or find old model husky’s in the local pawnshops

• 
  @nedstudios6490 Жыл бұрын

  Why does everyone pronounce HUSKA Varna? Worked for HuskVarna for 8 years and everyone says it. So! Try husk-varna not HuskAvarna

• 
  @cahlampung76732 жыл бұрын

  Hai Cronkito berapa banyak sugihara yg kamu punya

• 
  @thejackel18442 жыл бұрын

  That "safety" chain is bogus, ditch that and remove the spark arrester screen to improve performance..

• 
  @pal5031psu3 жыл бұрын

  *This is a great sawSnapper It's powerful,🌼 **allabout.wiki/Wolf** easy to use, and has a lot of great features that make it safer for a homeowner to use, such as the compression release, chain brake, and choke that sets the throttle to idle up when starting. The chain is easy to adjust. The engine has a lot of horsepower and torque for cutting big sections of wood quickly. You cannot bog this saw down unless it gets pinched. But that's true of nearly every saw.*

• 
  @markclark16053 жыл бұрын

  Dull chain, will destroy the chain and bar. Makes the saw run hot.

• 
  @markclark16053 жыл бұрын

  I bought mine in 2017 and it starts great either hot or cold.

• 
  @johnclarke66473 жыл бұрын

  It was probably getting vapor lock. If it sits in the sun for a period of time after running, the gas in the tank will boil if you open it. I was cutting with my ms 660 and ms 360 and it was hot and I had been cutting some hard hickory and the tanks were getting empty, so I opened them up to refill them and the remaining gas puked all over the saw. I fill d them back up with cool gas and they cranked back up.

• 
  @robertshoemaker62043 жыл бұрын

  I like the Sugihara bars use them in my 32 inch or bigger bars they hold up quite well. Better then the cheesez Oregon light weight bars..

• 
  @crchrdsn3 жыл бұрын

  Love this saw. I found out that the air filter will clog fast if you don't keep the chain sharp. I was also cutting a nasty deteriorating cedar stump (lots of dust).

• 
  @butunoisimion5293 жыл бұрын

  this chainsaw you not maintain nice

• 
  @kevinatkins40903 жыл бұрын

  Great review! Tsumara makes a good bar too😎 they look just as badass as well

• 
  @g.d.76293 жыл бұрын

  Remember 1&1/2 turns CCW will set to perfect settings. Probably has specs in manual.

• 
  @g.d.76293 жыл бұрын

  Also for D tool a piece of 1/4 in brake line and stick needle nose in and crush one spot. Creates perfect D

• 
  @g.d.76293 жыл бұрын

  You need the D tool to set both low/high 1&1/2 ccw from lightly seated. Idle screw is very fine thread. You really seem to know whats going on. They did have probs w dolmar/ makita/maruyama mcv51 all 3 same saw.The spring to hold needle seat down wasnt strong enough. If it happens you will know when you pull rope.If gas gets in cyl just pop top take plug out and pull over. Once started no more probs.My Husq 550xpMKII feels almost 100% identical to my blue makita 5000p

• 
  @robertcaparelli35353 жыл бұрын

  Is it safe to put in a vice? Worried a vice will wreck the composite filled knockouts

• 
  @jolkraeremeark69493 жыл бұрын

  Well, did you put it in a vise, any adverse effects?

• 
  @douglasalves60264 жыл бұрын

  esse é o melhor motosserra potente que eu ja vi eu tenho dois motosserra potente da sthil

• 
  @FredFlintstone214 жыл бұрын

  Maybe some old Japanese sword makers work for sugihara! Thanks for sharing!

• 
  @rogervandergriff18514 жыл бұрын

  A little rough on that saw ain't you, running it the dirt and just dropping it on the ground. Take care p f your saw and it will take care you.

• 
  @MrGreenjubas4 жыл бұрын

  what is better for her 3/8 or 0.325?

• 
  @corpsiecorpsie_the_original3 жыл бұрын

  Smaller pitch seems to be more efficent for saws, alas do you really want to deal with 0.325 pitch?

• 
  @patriciawalker25034 жыл бұрын

  clean that dirty ass filter and it will crank alot easier.

• 
  @francisom9034 жыл бұрын

  Is 16 bar?

• 
  @raptordan68514 жыл бұрын

  Have you had a crank bearing failure yet ? My 562 didn’t last two years !

• 
  @bigtexas75804 жыл бұрын

  *10:37** 🤣🤣🤣🤣🤣 Good vid, thanks. I ported the muffler on mine, removed the carb screw limiters and made it a litter richer on the high side and this little saw has alot of power now.*

• 
  @Cuttingwithcronkito4 жыл бұрын

  Thanks for watching. I have left mine stock so far, it has worked happily right from the box.

• 
  @torincody83783 жыл бұрын

  a tip : watch series at flixzone. I've been using it for watching lots of of movies lately.

• 
  @levikendrick34553 жыл бұрын

  @Torin Cody yup, I've been watching on Flixzone for since november myself =)

• 
  @123ChrisG4 жыл бұрын

  On par with Stihl Husqvarna but much better value for money. Little bit more weight per hp but with that it's probably more reliable which is what brought me to dolmar/makita in the first place. My logic goea like this if it weighs a pound or two heavier but its built like a little tank i will take it over a lighter more power per weight saw every time. I own this saw and two others, i run 16" bar and mostly cut firewood and trees now and then but nothing huge and this saw is a beauty. I also have Stihl Ms211 with 16" and Husqvarna 550xp mk 2 with 18" bar, all stock apart from detune on this Makita, i heard factory lean set and cat muffler can cause problems, other than that brilliant saw, reliable, good value, good reputable brand.

• 
  @Cuttingwithcronkito4 жыл бұрын

  I think in the case of this saw it may pass stihl and husky on some aspects. Quality wise it is built very well. Power wise it is just fine, just not as rabid as the 550. Mine wears a 20" bar and doesn't seem to mind. I have a 261 at my new job, and I think I prefer the dolmar/makita. I would buy it again before the 550/261.

• 
  @g.d.76294 жыл бұрын

  PS u need the large D for carb!

• 
  @JMGeranimo3 жыл бұрын

  That for the high and low ? I was just trying to figure it out.

• 
  @g.d.76294 жыл бұрын

  Doubt if carb tool is for anything but idle. Low and High are both 1+1/2 turns ccw from light seat. Thats correct. Set there and no trouble. If your going in mountains get autotune or mtronics.

• 
  @Cuttingwithcronkito4 жыл бұрын

  We're at 7,000' here, and have had nothing but problems with autotune. Tried the 550 and 562. It was very frustrating to have a saw that wouldn't start back up if it sat in the sun for more than a few minutes. My husky dealer says the new generation of autotune is perfect, but I haven't tested them out.

• 
  @g.d.76294 жыл бұрын

  Yes Ibot mark II 550XP AND IT TRUELY IS 10 X FASTER. NO COMP RELEASE BUT STARTS FASTER.HARD TO EXPLAIN. I BOT IT WHEN CHAINSAWS DIRECT HAD THEM $519+TAX

• 
  @g.d.76294 жыл бұрын

  But I love it!!! I have a jonsered 2253 which looks better to me. It's new too. Hadboth running not much diff but 550 started fast and straightened out fast. Will put 18 in total 3/8 bar and chain. Swap rim gear. But It really is different.You"at 7000 ft so your air is thinner right?? I wud think less fuel also to keep mixture right.They need to make a scan tool to see codes. And data!!

• 
  @g.d.76294 жыл бұрын

  Also put choke on fast idle mode to start!!! Thats suppose to help.

• 
  @g.d.76294 жыл бұрын

  Mtronics doesn't have that option. yet

• 
  @captainsledge75544 жыл бұрын

  All u need for hot start issues is a new primer bulb and to open ur gas cap and let pressure out. Thats it. All ive ever had to do. My 562 has been the absolute best saw ive ever owned.

• 
  @Cuttingwithcronkito4 жыл бұрын

  Glad that worked for you! Maybe Husqvarna shipped some saws with bad purge bulbs? That was our thoughts anyways. We tried the gas cap trick first with no luck... The boss has had much better luck with Echo, at least for smaller saws. I went with a Dolmar/Makita, very happy with it.

• 
  @captainsledge75544 жыл бұрын

  Makita/Dolmar is a good saw. But husky has alot more power. Idk what year you had but i do know that you can buy a box of 100 purge bulbs and 50 will be bad. So that is one issue. While also the older firmware from the first few models was fairly new so they were working out kinks. Ive not had an issue with any of the new ones. No issues at all. They update firmware once ever 6 months to a year. Even the newest firmware adds power and torque. Also new top covers are vented. I forgot to mention that. Husky fixed that issue as well. Stihl has gone to hell with the new emmission standards. I don't sell them anymore because i got tired of every single one of them having engine issues within a month. Holes in pistons, running too lean, detonation etc. Avoid stihl until epa lays off or they introduce fuel injection to all of them.

• 
  @SP-mp9yi4 жыл бұрын

  I just bought my 562XPW today bought the 24” Sugi Hara bar and the C 85 X Cut chains. Its a 2019 model year I’m hoping that Husqvarna worked out the kinks, I still hear the air filter seal is not good I was thinking about using an O ring or soft draft tape, I see some grease the area before putting on the air filter and some say use oil spray too on the filter, wish they had gone with the center screw car like filter on the 572XP seems far more up to date. Anyway she sure does look fantastic new especially with the Sugi lol. Thanks guys.

• 
  @hiscifi2986 Жыл бұрын

  Yes I noticed that it builds up tank pressure, which could cause it to flood if left to stand. I changed the metering diaphragm on my 560 (see my video.), as the old one had gone very stiff and was either on or off, with no suppleness left in the rubber. This could have been caused by using ethanol fuel.

• 
  @RR-et6sh4 жыл бұрын

  Do you still own that saw?

• 
  @Cuttingwithcronkito4 жыл бұрын

  It got ran over... :(

• 
  @man91704 жыл бұрын

  are you going to buy a new one?

• 
  @crystalclearmentalhealth23924 жыл бұрын

  I love my 355-T it rips like a Stihl 201 for the cost of a 193 I got it for myself for small stuff on the ground but my bf who is a climber uses it everyday now over his 193 and 201 He really loves climbing with it 😁👍

• 
  @Cuttingwithcronkito4 жыл бұрын

  Only downsides are the filler caps and weight IMO.

• 
  @crystalclearmentalhealth23924 жыл бұрын

  @@Cuttingwithcronkito yeah the caps are so tiny I spill has and oil a lot because I can't see

• 
  @Cuttingwithcronkito4 жыл бұрын

  @@crystalclearmentalhealth2392 Almost every time is an overfill lol

• 
  @577buttfan4 жыл бұрын

  Yeah especially after throwing the spark arrestor away and porting the exhaust a bit..then retune carb.

• 
  @jsource104 жыл бұрын

  Good video. I have had my 562xp for a year now and it's the best saw I have ever had. It rips. No problems like you mention. I deal with a lot of Stihl dealers and they all seem to run husqy now.

• 
  @Cuttingwithcronkito4 жыл бұрын

  My old crew pretty much runs Echo now. The boss got tired of messing with the Husqvarnas...

• 
  @jsource104 жыл бұрын

  @@Cuttingwithcronkito echo makes a nice saw, but that line is distributed by golden eagle and there are barely any servicing dealers here in the pnw. Which is sad.

• 
  @Cuttingwithcronkito4 жыл бұрын

  @@jsource10 Their smaller saws seem pretty good. Their bigger saws need some updates. That sucks about your dealers. I pretty much do all my own work, so I don't worry too much about local support. My newest saw is a Dolmar/Makita, and there is no such dealer anywhere close by.

• 
  @RR-et6sh4 жыл бұрын

  I would like to challenge you to a friendly test of bare knuckle combat. If your interested please let me know and I will gladly make arrangements for the date and location of the fight. You choose the time and location of course. I'm 5'9 and weigh 120 pounds.

• 
  @Cuttingwithcronkito4 жыл бұрын

  I'll pass, but thanks for the offer!

• 
  @hugostiglitz47774 жыл бұрын

  Charlie Z is that you?

• 
  @brianmorrison90664 жыл бұрын

  I have a 500xp mark 2. It rocks. I was hesitant at first. Probably 25 thanks through it and starts in 1 or 2 pulls.

• 
  @TheDurnans4 жыл бұрын

  I didn't know this saw existed or I may have taken a look at it. Instead, I purchased an Echo 501P to run along side of my 346XP. We're still breaking the Echo in.

• 
  @RR-et6sh4 жыл бұрын

  I wish husqvarna would still make the xp, the x-torq that replaced the xp is just not as good. I want a echo 620pw

• 
  @Cuttingwithcronkito4 жыл бұрын

  One of the reasons I bought this over the 501 is the ability to switch between .325 and 3/8. This one can wear a husky small mount bar with no modifications. Apparently the echo oiler is in a different spot and the husky bar would need drilled for it to oil. That being said, the boss has switched to echo for all his smaller saws.

• 
  @JungleJimAB9AB4 жыл бұрын

  Good, take it to the bank user review. Keep up your great videos. Thanks for posting.

• 
  @gnarlychainsawcompany38934 жыл бұрын

  Nice review, are you in the US or Canada?

• 
  @burbman604 жыл бұрын

  Heavy ass saw to drag around, respectable power and fun to run.

• 
  @thomasbeard8383 жыл бұрын

  As long as I’m young enough to carry one through the woods i see no reason why I shouldn’t. They can feel heavy after a while but look back at the pile of wood behind you.

• 
  @daniheres5 жыл бұрын

  Hello Day, can you tell me if the top cover on the engine and air filter from husqvarna 562xp fit to 560xp and can I use it?

• 
  @Cuttingwithcronkito5 жыл бұрын

  I have never held a 560xp, so I'm not sure if they are interchangeable or not. From what I read the 560 has a lower profile and smaller filter. If you get ahold of some info let me know, I'm curious now...

• 
  @coops50605 жыл бұрын

  3:54 oooookay lol

• 
  @Cuttingwithcronkito5 жыл бұрын

  :)

• 
  @larryprice63215 жыл бұрын

  Blake Shelton cutting wood !?!? Wow must be a good saw . Just kidding, good review watched the whole thing

• 
  @Cuttingwithcronkito5 жыл бұрын

  Thanks Larry! It does seem to be pretty good. It's on about 350 trouble free hours now and still going strong.

• 
  @wellsbenedict33333 жыл бұрын

  pro tip: you can watch movies at Flixzone. I've been using them for watching loads of movies lately.

• 
  @brycencesar62733 жыл бұрын

  @Wells Benedict yea, I've been watching on flixzone} for years myself :D

• 
  @loganjonah95753 жыл бұрын

  @Wells Benedict definitely, have been using flixzone} for months myself :)

• 
  @lukemarc58903 жыл бұрын

  @Wells Benedict definitely, I've been watching on Flixzone} for months myself =)

• 
  @PolarettiGR5 жыл бұрын

  tell the truth....husky needs 2 pistons a year

• 
  @Cuttingwithcronkito5 жыл бұрын

  Yeah... At least rings every year. This 562 actually is on its second piston though.

• 
  @tankmeister81315 жыл бұрын

  70 degree heat That’s ice cold weather try in the 90’s Sounds like something else is wrong That saw sounds like shit

• 
  @Cuttingwithcronkito5 жыл бұрын

  You should hear it now! It spit the plug out and is parked... In the 90s it seems like you have to do the half choke dance to get it going after a break or fill up. I am done with Husqvarna for now. Out of 6 saws only 2 are still going strong. The 390 and 372.

• 
  @janethbailey10855 жыл бұрын

  I brought this husky back to the philippines with me brand new still in the box, Christmas 2017,I used it maybe 5 hours total in 2 days,it's so dam hot there,anyway when I shut it off it would not hit a lick,it's getting plenty of gas,I pulled out the plug it's getting fire,it should run.

• 
  @Cuttingwithcronkito5 жыл бұрын

  @@janethbailey1085 There seems to be a spot between high idle and full choke that it will run on until it catches up with itself, but you have to be quick. We always figured the gas was getting boiled back into the tank, so that's interesting that yours was getting gas and still messing up. I hope they figure it out, because I really like how they run when they run.

• 
  @janethbailey10855 жыл бұрын

  @@Cuttingwithcronkito you no were I think I screwed up I mixed the gas 50:1 like we do here in America, I was supposed to mix 25:1 that's what I was told today,we're going back in June I'm bringing a 3120 with me, there like a small sawmill there,I've logged here in missouri for 30 years never had a husky do that before,I might have melted it down a little bit the humidity is 100% there normal temperature is around 95 to 100.

• 
  @Cuttingwithcronkito5 жыл бұрын

  @@janethbailey1085 I don't remember for sure, but I think 50:1 is the recommended mixture. We run 40:1 in the work saws, and the new Husqvarnas still are a pain to get going once hot. The 550 is even worse than the 562 in that aspect, at least ours are. I suspect a lot of the problem is that they are so compact that there's a lot of heat transfer from the cylinder to the air box. I'm curious to know if 25:1 helps. I would think the heat and humidity are about the same between the Philippines and Missouri? I bet the 3120 works perfectly...

• 
  @johnnyantoniuk115 жыл бұрын

  I've got this saw. Im a wild land fire fighter and have never had an issue. my only issue is the air filter pulls in ash.

• 
  @Cuttingwithcronkito5 жыл бұрын

  Nice! Hopefully they got them fixed since we bought this one. I love the way they run once they're running... You might try some pantyhose over the filter, seems like that cut down on the debris intake a bit.

• 
  @scottjohnson90944 жыл бұрын

  Likewise John antoniuk photography. I’ve never had any cold or hot starting issues. Absolutely love this power saw, perfect compromise of power and weight and just great all around saw. Last power saw I’ll ever own

• 
  @jarrett7543 жыл бұрын

  They make filter socks and better filters for em now. Quite a few of those were rolling though the shops for awhile blown up from getting too many fines down the intake. What’re you rockin now?

• 
  @johnpower55265 жыл бұрын

  Should of just bought a 362 Stihl

• 
  @Cuttingwithcronkito5 жыл бұрын

  Probably so... :)

• 
  @sureact5 жыл бұрын

  You removed the fuel bulb... so how do you manage to start it when cold or dry-empty??? Btw, great video!!!

• 
  @Cuttingwithcronkito5 жыл бұрын

  Thanks for watching! If I remember, the purge bulb is on the return side, so it doesn't seem to interfere with the flow to the carb. Starts back from empty fairly easily, almost like an old saw. Starts from cold nicely too. It was cold in this video, hadn't been used for at least a day. Nice thing is if it doesn't seem to work you can easily stick the bulb right back! Good for warranty stuff, ya know? ;-)

• 
  @sureact5 жыл бұрын

  @@Cuttingwithcronkito thanks for the answer! yeah, for the warranty definetely it's great :)

• 
  @Cuttingwithcronkito5 жыл бұрын

  @@sureact Sure thing! Tricks of the trade... :)

• 
  @jessiebruno93135 жыл бұрын

  @@Cuttingwithcronkito Is there anything to gain by removing the fuel bulb? I never ever use mine or the decompression valve for that matter,i like running these saws been running them since 2012 but i find after a couple of years they start running bad

• 
  @jessiebruno93135 жыл бұрын

  Never mind for some reason i only ended up watching the second part of this video lol