Automotive - Electronics repair and reprogramming , locksmith regarding automotive area (key programming, lockpicking ), tools and software reviews also including repair of tools.
Are the bcm250 key eeprom only stored on the bcm ie if you program the eeprom with a key chip it can be used straightaway no ecu or cluster coding? thanks
@elgato4604 күн бұрын
Can you program a key for a ford ranger 2004 and Chevy Silverado 2002? With the km100
@legin37535 күн бұрын
what did u put on eeprom ?? cheers
@legin37535 күн бұрын
to get coating off
@UnixCoDElectronics4 күн бұрын
Hello, i use in general : Nitromors All Purpose Paint & Varnish Remover
@legin37534 күн бұрын
Thanks for reply ☺️
@irfankhalifa56475 күн бұрын
Hi, Where do you get the solder adapter for the 44 pin flash chip i cant find it...
@UnixCoDElectronics5 күн бұрын
Hi, for what programmer ? Because in general there are no compatible between programmers.
@irfankhalifa56475 күн бұрын
@@UnixCoDElectronics Thank you for the quick reply this is for the xgecu t48 programmer...
@user-kz8zb6vi6j5 күн бұрын
Vvdi is looking for pin 3 and 7. Eprom cannot be read
@UnixCoDElectronics5 күн бұрын
You don’t need pin 3 and 7 to read only eeprom check datasheet. If you don’t know, don’t talk. ( Pin 3 is Write Protection Pin 7 is Hold )
@user-kz8zb6vi6j5 күн бұрын
@@UnixCoDElectronics i just asked dont get mad.multiprog is not reading it only vvdiprog
@UnixCoDElectronics5 күн бұрын
@user-kz8zb6vi6j i’m not getting mad, but in general when someone ask use question mark, multi-prog or any other device you just need to deactivated pin-check for current operation.
@user-kz8zb6vi6j5 күн бұрын
@@UnixCoDElectronics thank you
@SilverSurger856 күн бұрын
Without database this video is useless
@user-sf9hg1bc1m6 күн бұрын
هل يبرمج ايبروم زاويه التوجيه
@prolock56608 күн бұрын
Hello, thank you for this excellent video and your channel. Your comprehensive style is both informative & explorative. Great work, thank you & please continue to post more content... best wishes 🎉 🙏
@markusheitmann13 күн бұрын
Can you do proper video of exactly what this tool is and how it works? 😊
@UnixCoDElectronics13 күн бұрын
Hello, yes i plan to do but first i need to get some MLB blanks from somewhere because xhorse don’t sell yet keys. In general this tools generate immo data from a working MLB key and allow you to make another dealer key and learn to car on MLB platform.
@markusheitmann13 күн бұрын
@@UnixCoDElectronics thats strange to sell a product but not the accessories.. but i guess its only a matter of time 😄
@waldemarfechtel164413 күн бұрын
We still wait for keys @@UnixCoDElectronics
@hamajamal-zl8so16 күн бұрын
Will work by obd ?
@UnixCoDElectronics16 күн бұрын
Yes it will work via obd
@danield677318 күн бұрын
Hi mate, thanks for reviewing my software that I have developed some time ago. Much appreciated... Kind regards danyguit2000
@craigescapeddetroit519821 күн бұрын
When a company makes the price too expensive for a simple product, it will attract the Clone Makers
@shahthegreat175322 күн бұрын
HI.can clone? or just to check short componen.
@shahthegreat175322 күн бұрын
ROBOCOP VIEW U HAVE
@SergioHernandez-vv3gn22 күн бұрын
Awesome.
@eugenemandy331423 күн бұрын
Can you please send me immo off file of it please
@pepo3605 күн бұрын
Me too
@eugenemandy331423 күн бұрын
Very helpful
@brunomartinho771823 күн бұрын
Olá amigo, onde posso fazer download do database?
@rajbi124 күн бұрын
Multiprog vs orage5 which one is best ?
@UnixCoDElectronics24 күн бұрын
Orange5 was a very good tool, but this days multi-prog wins if you on new generations cars ecus/tcu/bcm
@kuripotech46125 күн бұрын
Is this legal? I mean if you turned off whatever dtc is in there without fixing the problem what will happen to the vehicle?
@UnixCoDElectronics25 күн бұрын
Hello, regarding legal hard to answer, but dtc off should not be done on cars used on public roads or to hide problems.
@kuripotech46123 күн бұрын
@@UnixCoDElectronics and So where do we use this type of program then? Thanks
@ssird60ss9826 күн бұрын
What is the solution when the screen works on other rns and others screens seems to have the same issue (white screen) ?
@vehix41129 күн бұрын
Nice Video and Script just tried it out on med9.1 ECU. I think adding the VIN option would be nice that way if needed to change VIN on the donor ECU it will be at ease. Thanks again!!!
@UnixCoDElectronics28 күн бұрын
Thanks for the info! I will keep in mind when i update it
@wikiliks118729 күн бұрын
Now u had time to understood if its worth or not? Also kt200 first v.. hw looks more qualitative?
@UnixCoDElectronics29 күн бұрын
If you have kt200 don’t worth to go to kt200II there is nothing new in my point of view also there was no update in 6 months, and first update released require to buy a new board.
@wikiliks118729 күн бұрын
@@UnixCoDElectronicsim talking about hw quality.. first version looks more qualitative ... is that true? Regarding updates we know about chinnese clones how they "update" them 🤣
@UnixCoDElectronics28 күн бұрын
Regarding hardware i have not seen difference in quality except the colour of the coating for board. I bet both have same grade of quality(low) for components taking in consideration are made by same company. Main board its same v1,v2…
@DonDoneL3 күн бұрын
@@UnixCoDElectronics do you think that foxflash is better?
@mohamadsweed4987Ай бұрын
❤Hello, do you think it is a good programmer and worth buying? Does it fix the abs accident? Thank you😊
@UnixCoDElectronics28 күн бұрын
Hi, yes worth buying if you don’t have vvdi-prog, it does not fix anything, its just a programmer with read / write functions. All fixes / mods to files you need to make yourself or write scripts ( similar way of UPA )
@grzmajАй бұрын
its otp bricked
@3letron1cG4amesBrАй бұрын
excellent video congratulations!! To program a new panel, is Opcom 1.70 necessary? And does the new panel need to have any requirements?
@javierpnd3625Ай бұрын
Cual es mejor ?
@UnixCoDElectronicsАй бұрын
In general i chose xhorse for transponders, remote generation, but as obd2 programming km100 its better then key tool max + xhorse mini obd. ( but i use other tools for obd2 programming ). The best tool is the one that fits among your other tools. Eg if you have autel508/608 then km100 is no need
@YevgeniyDeyevАй бұрын
Awesome video! Thank you so much! Could you please advise if the method you demonstrated will work for 2000 VW Beetle dash programming? Situation - all keys lost, IMMO Off on ECU. I would like to add new keys to dash board, and (if successfu)l turn IMMO back on on ECU.
@UnixCoDElectronicsАй бұрын
Hello, for VW(that year) you need only to read pin code from dashboard and then adapt with vcds the transponder.
@YevgeniyDeyevАй бұрын
@@UnixCoDElectronics Awesome! Thank you!!
@artjomka3Ай бұрын
hey, where software SetConfig for RNS 510? thanks
@UnixCoDElectronicsАй бұрын
I cannot provide link for sw, even if provide link you still need “firmware” for cable
@victor790Ай бұрын
Здравствуйте не могли бы вы мне помочь какой из этих двух сканеров сможет мне запрограммировать 100% второй ключ на ford transit 2014 года mk8. У меня есть только один полностью рабочий ключ. Второй ключ нужно запрограммировать чтобы работал иммобилайзер и RF частота брелка.
@UnixCoDElectronicsАй бұрын
Sorry i’m not able to say if one of this can do. Have not tryed
@ashrafpp7639Ай бұрын
I want display
@hammerholt7Ай бұрын
Thanks for the video, however I have'nt been able to find the any kind of database. Can you share a link ???
@luv_xxx2770Ай бұрын
hi sir from where can download EFfl software
@user-dt2pn3xr5uАй бұрын
Ne pas payer de frais. L'appareil fonctionnera-t-il ?
@user-dt2pn3xr5uАй бұрын
Le non-paiement d'une facture annuelle de 350 $ entraînera l'arrêt de l'appareil.
@markusheitmannАй бұрын
Do i need the zed, or do the xhorse key tool max work for precode transponder?
@UnixCoDElectronicsАй бұрын
It will work also on key tool, you need to tranfer file to device then go to - Special functions - Immo data tool - europe - bmw - ews4 - start execution.
@brunoricos-olhos5033Ай бұрын
Good video very simple understanding
@UnixCoDElectronicsАй бұрын
Thanks
@siegfredreginaldoАй бұрын
do obdstar have ECU DATA REPAIR?
@UnixCoDElectronicsАй бұрын
On few case only, mostly have options to read immo data from ecu but i have never use it
@-RaiKo-Ай бұрын
Thank you very much 🤝
@AfreenKhan-xd5ztАй бұрын
How clone ecu med17.5 & edc17c46.any trick ? Clone ecu.
@UnixCoDElectronicsАй бұрын
You need to process and move immo data from old to new ecu, it is not like on edc16.
@AfreenKhan-xd5ztАй бұрын
Hello sir how r you.multi prog med17.5 ecu clone possible ?.
@UnixCoDElectronicsАй бұрын
It can read, but you cannot clone just by swap files.
@pumciajАй бұрын
Więc nie oszukuj że się da 😂😂
@UnixCoDElectronicsАй бұрын
😅
@SIMOVITCH2000Ай бұрын
❤
@Compu1AАй бұрын
iaw1av so Magnetti Marelli?
@saiwanmohammed9727Ай бұрын
I need file EEPROM and file int FLASH for truck newholland TD5 95 how can i contact you for quetion , give me email please.
@UnixCoDElectronicsАй бұрын
I have email added at my KZread channel, check channel and to about you will see the email.
@samgreen9302Ай бұрын
I have followed the video but when i scan the car nothing comes up below "scanning CAN" in the bottom box and nothing shows up in the 2nd box where the scanned normally would. Any ideas what wrong? I have installed multiple times.
@pumciajАй бұрын
Jak sie ma eeprom z auta co był ten kluczyk, to nie ma problemu odblokować. Pokaz jak odblokować kluczyk bez eepromu?
@UnixCoDElectronicsАй бұрын
No way to unlock without eeprom
@pumciajАй бұрын
@@UnixCoDElectronics mam eeprom ale z innego auta niż kluczyk.
@mecaniquepourtous7791Ай бұрын
Can you help me get the imo off program or tell me where to
@Vincent-cc8xoАй бұрын
If you had to only have 1 would it be obdstar or autel ? What 1 would you buy first ? For Europe cars thanks
@UnixCoDElectronicsАй бұрын
Hello, i had obdstar over more then 1 year before i have buyed autel, for me personal i use obdstar as my fist choice on all brands except ( VAG, MB, BMW ) where i have dedicated tools.
@abdesdarra67019 күн бұрын
@@UnixCoDElectronics Hi, thanks for your reply, what are you using for those brands ?
Пікірлер
Are the bcm250 key eeprom only stored on the bcm ie if you program the eeprom with a key chip it can be used straightaway no ecu or cluster coding? thanks
Can you program a key for a ford ranger 2004 and Chevy Silverado 2002? With the km100
what did u put on eeprom ?? cheers
to get coating off
Hello, i use in general : Nitromors All Purpose Paint & Varnish Remover
Thanks for reply ☺️
Hi, Where do you get the solder adapter for the 44 pin flash chip i cant find it...
Hi, for what programmer ? Because in general there are no compatible between programmers.
@@UnixCoDElectronics Thank you for the quick reply this is for the xgecu t48 programmer...
Vvdi is looking for pin 3 and 7. Eprom cannot be read
You don’t need pin 3 and 7 to read only eeprom check datasheet. If you don’t know, don’t talk. ( Pin 3 is Write Protection Pin 7 is Hold )
@@UnixCoDElectronics i just asked dont get mad.multiprog is not reading it only vvdiprog
@user-kz8zb6vi6j i’m not getting mad, but in general when someone ask use question mark, multi-prog or any other device you just need to deactivated pin-check for current operation.
@@UnixCoDElectronics thank you
Without database this video is useless
هل يبرمج ايبروم زاويه التوجيه
Hello, thank you for this excellent video and your channel. Your comprehensive style is both informative & explorative. Great work, thank you & please continue to post more content... best wishes 🎉 🙏
Can you do proper video of exactly what this tool is and how it works? 😊
Hello, yes i plan to do but first i need to get some MLB blanks from somewhere because xhorse don’t sell yet keys. In general this tools generate immo data from a working MLB key and allow you to make another dealer key and learn to car on MLB platform.
@@UnixCoDElectronics thats strange to sell a product but not the accessories.. but i guess its only a matter of time 😄
We still wait for keys @@UnixCoDElectronics
Will work by obd ?
Yes it will work via obd
Hi mate, thanks for reviewing my software that I have developed some time ago. Much appreciated... Kind regards danyguit2000
When a company makes the price too expensive for a simple product, it will attract the Clone Makers
HI.can clone? or just to check short componen.
ROBOCOP VIEW U HAVE
Awesome.
Can you please send me immo off file of it please
Me too
Very helpful
Olá amigo, onde posso fazer download do database?
Multiprog vs orage5 which one is best ?
Orange5 was a very good tool, but this days multi-prog wins if you on new generations cars ecus/tcu/bcm
Is this legal? I mean if you turned off whatever dtc is in there without fixing the problem what will happen to the vehicle?
Hello, regarding legal hard to answer, but dtc off should not be done on cars used on public roads or to hide problems.
@@UnixCoDElectronics and So where do we use this type of program then? Thanks
What is the solution when the screen works on other rns and others screens seems to have the same issue (white screen) ?
Nice Video and Script just tried it out on med9.1 ECU. I think adding the VIN option would be nice that way if needed to change VIN on the donor ECU it will be at ease. Thanks again!!!
Thanks for the info! I will keep in mind when i update it
Now u had time to understood if its worth or not? Also kt200 first v.. hw looks more qualitative?
If you have kt200 don’t worth to go to kt200II there is nothing new in my point of view also there was no update in 6 months, and first update released require to buy a new board.
@@UnixCoDElectronicsim talking about hw quality.. first version looks more qualitative ... is that true? Regarding updates we know about chinnese clones how they "update" them 🤣
Regarding hardware i have not seen difference in quality except the colour of the coating for board. I bet both have same grade of quality(low) for components taking in consideration are made by same company. Main board its same v1,v2…
@@UnixCoDElectronics do you think that foxflash is better?
❤Hello, do you think it is a good programmer and worth buying? Does it fix the abs accident? Thank you😊
Hi, yes worth buying if you don’t have vvdi-prog, it does not fix anything, its just a programmer with read / write functions. All fixes / mods to files you need to make yourself or write scripts ( similar way of UPA )
its otp bricked
excellent video congratulations!! To program a new panel, is Opcom 1.70 necessary? And does the new panel need to have any requirements?
Cual es mejor ?
In general i chose xhorse for transponders, remote generation, but as obd2 programming km100 its better then key tool max + xhorse mini obd. ( but i use other tools for obd2 programming ). The best tool is the one that fits among your other tools. Eg if you have autel508/608 then km100 is no need
Awesome video! Thank you so much! Could you please advise if the method you demonstrated will work for 2000 VW Beetle dash programming? Situation - all keys lost, IMMO Off on ECU. I would like to add new keys to dash board, and (if successfu)l turn IMMO back on on ECU.
Hello, for VW(that year) you need only to read pin code from dashboard and then adapt with vcds the transponder.
@@UnixCoDElectronics Awesome! Thank you!!
hey, where software SetConfig for RNS 510? thanks
I cannot provide link for sw, even if provide link you still need “firmware” for cable
Здравствуйте не могли бы вы мне помочь какой из этих двух сканеров сможет мне запрограммировать 100% второй ключ на ford transit 2014 года mk8. У меня есть только один полностью рабочий ключ. Второй ключ нужно запрограммировать чтобы работал иммобилайзер и RF частота брелка.
Sorry i’m not able to say if one of this can do. Have not tryed
I want display
Thanks for the video, however I have'nt been able to find the any kind of database. Can you share a link ???
hi sir from where can download EFfl software
Ne pas payer de frais. L'appareil fonctionnera-t-il ?
Le non-paiement d'une facture annuelle de 350 $ entraînera l'arrêt de l'appareil.
Do i need the zed, or do the xhorse key tool max work for precode transponder?
It will work also on key tool, you need to tranfer file to device then go to - Special functions - Immo data tool - europe - bmw - ews4 - start execution.
Good video very simple understanding
Thanks
do obdstar have ECU DATA REPAIR?
On few case only, mostly have options to read immo data from ecu but i have never use it
Thank you very much 🤝
How clone ecu med17.5 & edc17c46.any trick ? Clone ecu.
You need to process and move immo data from old to new ecu, it is not like on edc16.
Hello sir how r you.multi prog med17.5 ecu clone possible ?.
It can read, but you cannot clone just by swap files.
Więc nie oszukuj że się da 😂😂
😅
❤
iaw1av so Magnetti Marelli?
I need file EEPROM and file int FLASH for truck newholland TD5 95 how can i contact you for quetion , give me email please.
I have email added at my KZread channel, check channel and to about you will see the email.
I have followed the video but when i scan the car nothing comes up below "scanning CAN" in the bottom box and nothing shows up in the 2nd box where the scanned normally would. Any ideas what wrong? I have installed multiple times.
Jak sie ma eeprom z auta co był ten kluczyk, to nie ma problemu odblokować. Pokaz jak odblokować kluczyk bez eepromu?
No way to unlock without eeprom
@@UnixCoDElectronics mam eeprom ale z innego auta niż kluczyk.
Can you help me get the imo off program or tell me where to
If you had to only have 1 would it be obdstar or autel ? What 1 would you buy first ? For Europe cars thanks
Hello, i had obdstar over more then 1 year before i have buyed autel, for me personal i use obdstar as my fist choice on all brands except ( VAG, MB, BMW ) where i have dedicated tools.
@@UnixCoDElectronics Hi, thanks for your reply, what are you using for those brands ?
Please share with me your WhatsApp number