Do you have any tips on being able to access that bottom bolt on the egr tube??? Even with a flex head ratchet I can't get in there enough
@theservantwithawrench14728 күн бұрын
Sorry I'm late. Not sure if you solved your issue, but did you try an extension, so you can have space to twist your wrist? Also did you remove the one top bolt for the heat shield? That one bolt on the heat shield got in my way, it tilted my ratchet so my socket wasn't able to catch the bottom EGR bolt.
@LostinmyAmazingness2 ай бұрын
Finally someone showing how to get it out. Thank you!
@georgyporgy70513 ай бұрын
Thanks for the video, a lot of help. BTW you could be a good ventriloquist honestly
@Pedo_phile_Muhammad5 ай бұрын
Thanks
@princessematane72315 ай бұрын
Amen 🙏
@user-lr4iu9tu8w6 ай бұрын
Thank you bro...just subscribed...God bless yon
@fernandomorales76606 ай бұрын
God bless you my brother, thank you for teaching your skills, and also for preaching God's Word
@davidrizo16538 ай бұрын
Great video, thanks!!!
@rexfinx12348 ай бұрын
Do you know where I can find a new intake manifold for this exact car? Took it to a shop and says I need it replace but I’m pretty sure I can do it myself, however every time i search I only find the intake manifold for the gt trim and idk if it’s the same
@theservantwithawrench1478 ай бұрын
The gts and gt has slightly different intake manifolds. I believe the only differences is that saucer looking thing on the passenger side of the manifold.... it's on the gts but not on the gt. The best place to look for the gts manifold is a junkyard OR you can check out Facebook 3G groups. Some of the members sell their used parts. Also check out Mitsubishi 3G forum online. I'm sure they have a section that sells only parts. May The Lord bless you on your search brother!
@hombredeseguros8 ай бұрын
Way to go bro god bless you keep preaching
@user-wj8uk6th5d8 ай бұрын
thank u for your video and message God bless
@trev67838 ай бұрын
My bank 1/1 has gone out, not looking forward to it. Anyone know the best angle to get it out? Better to come from under or wobblie socket through the 1 inch gap on top?
@jedidias70918 ай бұрын
Did you remove it? I have po421 right now.
@trev67838 ай бұрын
@@jedidias7091 yea I ended up using a long extension with a wobble attachment on a o2 socket and a long breaker bar.. took about 30minutes
@jedidias70918 ай бұрын
@@trev6783 did you have same code?
@trev67838 ай бұрын
@@jedidias7091 I don't remember the code, but I was running lean on and off for a few months then got the code bank 1 sensor 1 heated oxygen sensor blah blah. In my experience when you get the o2 sensor code, either the sensor is bad, its unplugged or the wire is damaged.
@trev67838 ай бұрын
@@jedidias7091 you got a gts or gt?
@alecesquivel34739 ай бұрын
Your an absolute legend my internet dad thank you for putting this together i butchered my spyder bad ima have her in tip top shape now thanks
@andrenabhan21869 ай бұрын
God bless you 🙏🏻🙏🏻🙏🏻🙏🏻
@johnhumphrey35049 ай бұрын
❤
@cristinogamboa50609 ай бұрын
God bless you brother, what problems could a bad oxygen sensor cause? Because i have my eclipse y wasten gas and not burning it at all
@theservantwithawrench1479 ай бұрын
I bad O2 sensor would display as a CEL, or the car would be getting bad gas mileage. 3G cars can get about 28 mpg on the highway. If it's getting less, then check for a CEL light.
@OPETHDIVINITY Жыл бұрын
AWESOME! Thank you so much, earned a new sub. I bought the whole kit from amazon, but as an IT pc repair guy, cars are new to me, but I refuse to pay a garage for something that I can learn to do, and you definitely helped with that
@user-zf9dj9bg2i Жыл бұрын
Great video 💯 thank you
@JoseOrtega-cc7gk Жыл бұрын
Can someone help my figure out what the black box located at the bottom of 9:15 is? I just got this car and it’s not connected to nothing. I have a hose coming from the aluminum block on the bottom right at 9:09 but it’s not connected to nothing but has a suction. Thanks in advance
@RonaldoBagaRonnie Жыл бұрын
Amen Bro. and thanks for help.
@brianwhitfield9798 Жыл бұрын
Great video. Do you need to take the egr valve off?
@theservantwithawrench147 Жыл бұрын
You can if you like! It's only two 12mm bolts. When you take it off, try to catch the paper gasket as you loose the EGR valve..or you can buy a new one from AutoZone or O'Reilly's for about $1. When you get the EGR valve off, spray some CARB spray in the passage, and use a Q-Tip to clean the soot out(may have to use like 10 Q-Tips). When you're done, spray a little WD-40 into the passage, let it soak for 30 minutes(or more), pour the WD-40 out of the passage, and put the ERG valve back on.. don't forget the paper gasket.👍😊 Stay Blessed brother!
@kassandra3359 Жыл бұрын
Thanks for info about the bulbs, but if you think lbgt should be banned, don't claim you're not against us
@theservantwithawrench147 Жыл бұрын
If you want to know the Truth, the Truth is most people who are homosexual were molested or introduced to sex at a young age...and they are either embarrassed of what happened long ago, or they relish in that lifestyle of pleading their flesh. So when their flesh dies, they will feel like they are dying within their very soul, because that is all they relied on due to their lifestyle. This doesn't just go for people who are homosexual or transgender, but for anyone who loves themselves more than they love God who gives mercy, grace, and salvation to all of the world, but much of the world HATE God by not listening to Him. They love Jesus' healings and miracles, but they hate when Jesus says "You must be born again to enter the Kingdom of God". People HATE that they have to change for the One who gave them life, and air, and all things to help them stay alive. But God still has mercy on them, but how long will they continue treating Jesus Christ as if He isn't the Son of God? How long will they pretend to believe that tomorrow won't be their last day on Earth? For the Word of God says: "And just as each person is destined to die once and after that comes judgment, so also Christ died once for all time as a sacrifice to take away the sins of many people. He will come again, not to deal with our sins, but to bring salvation to all who are eagerly waiting for him." - Hebrews 9:27-28 So death, and then judgement (by Jesus Christ). But God is waiting for you to come to Him for healing for your molestating, your trauma, your depression when you were young. You tried to cover it up(the abuse, the sexuality), by receiving a NEW identity because your you didn't want to see yourself as someone who was contaminated by someone else...someone who you trusted. So you searched for a new way to live...but it's just covering up all the pain and confusing you went through as a young person. Man was made in the image of God, so YOU were made in the image of God. But someone came along and tried to make you into another image...and if they couldn't change your body physically, they could change your thinking...your thinking about YOURSELF...making you believe you are worthless, and need to change. But you are not worthless to our Lord Jesus Christ. Your lifestyle is, but your image is not, because you was made in God's image. Jesus came down from Heaven and died for your own ways...so that if you believe in Him, and follow Him, then your everlasting soul will be saved. This is not a religion. No one is telling you to join a church, but only know Jesus Christ, and why he was spit on, and punched repeatedly, tortured on the Cross for all the evil you and I have done... Find out for yourself...and find out for yourself what He wants you to do with your life. Jesus says: "If you cling to your life you will lose it, but if you give up your life for me, you will find it." Have you given up your life to Jesus Christ? Because He gave up His life for you Kassandra. Be blessed in His Name(the Name of Jesus Christ).
@kassandra3359 Жыл бұрын
@@theservantwithawrench147 are you speaking as someone who was molested as a child, and turned to religion to help? If yes, you're just projecting. If no, you know even less about the subject than if you had been. And your Bible is no more believable than a book written by me claiming that Abraham Lincoln will come back to life and lead us to everlasting peace
@louisnxs7037 Жыл бұрын
I like this guy! He is thorough and easy to understand 👍
@weedyscissors Жыл бұрын
Thank you for the video and the words of wisdom
@tomasrosa5358 Жыл бұрын
God bless you.
@jaime___631 Жыл бұрын
Extremely helpful, thank you!
@theservantwithawrench147 Жыл бұрын
No problem brother, have a blessed day!
@dustinfrench5163 Жыл бұрын
So I'm having trouble finding a hose that has that restricter in it can I just make one
@theservantwithawrench147 Жыл бұрын
Well if you're looking for a replacement hose that is exactly like the hose with the restricter..you won't find it. But you can try and just replace it with a regular hose of the same size without the restricter, and see if that helps. Also, you can go to a junkyard, and see if they have any 3g Eclipses (V6), and just take the hose off of one of those.
@sam3353 Жыл бұрын
Once it gets warmer, this is my project for my 2003 GTS. Seein you go through it so easily is giving me confidence. :D
@theservantwithawrench147 Жыл бұрын
Thank you for watching! This is my 4th time removing the manifold. It gets easier the 2nd time. The first time it took 2 days to take it off..and that was me watching another video on KZread about it, but it wasn't too detailed or clear, so I had to guess some things, and figure it out...and then after a couple times taking it off I decided to make a video revealing the whole process, because there is layers to take off when it comes to this. Just take your time, have a good amount of light near the firewall to know what you're seeing, and feeling with your fingers when back there..and you'll have a good map of what is where. Stay blessed brother!
@steveschindler2802 Жыл бұрын
The information on changing the light was very good and helpful. Thank you
@drell205 Жыл бұрын
First off I appreciate the time and effort put into this vid SN: 8:52 does anyone know the part number or part name to that sensor? I lost the metal clip and been researching for a brick.
@theservantwithawrench147 Жыл бұрын
Not sure, what clip part that is. I looked on eBay, and Mitsubishi parts, but nothing. Maybe it comes with the plug, but not sure what the plug is. Perhaps for emissions. Thank you for watching! I've been wanting to do this for months, because there isn't many videos on KZread telling how to take off the manifold.
@hectorbarboza1926 Жыл бұрын
umm which is the upstream and the down stream?
@theservantwithawrench147 Жыл бұрын
Upstream is bank 2( the 2 sensors near the radiator and front). Downstream is Bank 1(the 2 sensors behind and after the engine). Think of upstream and downstream this way: River water always flows downstream. The same thing with exhaust gases, they flow down(stream) the exhaust pipelines. Stay blessed brother!
@sadfoxyplays3188 Жыл бұрын
I got a V6 GTS Mitsubishi eclipse syder. I just put a motor in from a Galant. After I plugged everything back up. I didn't get no reading. Only telling me the doors was open. What went wrong
@XKEquitablecareservices-Xiong Жыл бұрын
Thank you for sharing
@theservantwithawrench147 Жыл бұрын
You're welcome! God bless you!
@synguyen4310 Жыл бұрын
Thankyou for your teaching Mater
@pettyburgiz3 Жыл бұрын
AMEN!,.
@judithkurtovich2418 Жыл бұрын
😂thanks brother! I’m a lover of Sweet Jesus too. Thanks for the instruction with my van & the mini message which encourages me today! What a blessing!👍🏻🙏🏼💞.
@starboy32 Жыл бұрын
Cool.man thanks
@henryaliposa1462 жыл бұрын
Thanks for the vid. Should make more CRV RD1 vdeos I have the same model.
@mariannepecora51782 жыл бұрын
Is there a video available on replacing the bank 2 sensor 2 ?
@godfirst68802 жыл бұрын
I already changed bank 2 sensor 2 but didn't record it. But at sometime I'll record how it's done! Thank you for watch and listening, and may The Lord bless your life with His Holy Spirit!
@JR-ic4hl2 жыл бұрын
Why did you not just say the o2 sensor socket size. I swear its like pulling teeth to get details like this.
@godfirst68802 жыл бұрын
There's only one size for an Oxygen Sensor on any car. Not unless someone is working on a tractor trailer commercial truck. Thank you for watching brother!
@antonlords62 жыл бұрын
His information is correct. He's done it. I've done it. It works and it's the fastest way to improve the appearance of your cars engine compartment.
@michaelwilliamson35512 жыл бұрын
Engines don't mind dirt but they hate water. Mechanic 2022
@quelix96902 жыл бұрын
Muy buen video Grasias
@Alejoro16882 жыл бұрын
Jesus christ that is such a clean engine, i thought the video was black and white, how did you clean it that well i need to clean my eclipse like that
@theservantwithawrench1472 жыл бұрын
I clean my other two car engines the same way in this other video I did: kzread.info/dash/bejne/pq131byhnr29mNI.html May The Lord Jesus bless you in His Spirit!✝️♥️
@Alejoro16882 жыл бұрын
@@theservantwithawrench147 thank you brother💯
@YH7R2 жыл бұрын
preach brother i love you give the most high god his due GOD (YAHWEH)BLESS YOU 🙏🏾
@joshualiotta92432 жыл бұрын
Thanks for the help with this….bro keep doing what you’re doing.
@biggalljzionkemp97192 жыл бұрын
Thanks for the Words of wisdom as well bruh .
@edwardmantach25472 жыл бұрын
Thank You. Well done video and thank for talk about God !
@theservantwithawrench1472 жыл бұрын
Anytime brother, stay blessed, and God bless!
@verdugosk12 жыл бұрын
Amen bother! Keep doing what you're doing. God bless you.
Пікірлер
Thank you
Do you have any tips on being able to access that bottom bolt on the egr tube??? Even with a flex head ratchet I can't get in there enough
Sorry I'm late. Not sure if you solved your issue, but did you try an extension, so you can have space to twist your wrist? Also did you remove the one top bolt for the heat shield? That one bolt on the heat shield got in my way, it tilted my ratchet so my socket wasn't able to catch the bottom EGR bolt.
Finally someone showing how to get it out. Thank you!
Thanks for the video, a lot of help. BTW you could be a good ventriloquist honestly
Thanks
Amen 🙏
Thank you bro...just subscribed...God bless yon
God bless you my brother, thank you for teaching your skills, and also for preaching God's Word
Great video, thanks!!!
Do you know where I can find a new intake manifold for this exact car? Took it to a shop and says I need it replace but I’m pretty sure I can do it myself, however every time i search I only find the intake manifold for the gt trim and idk if it’s the same
The gts and gt has slightly different intake manifolds. I believe the only differences is that saucer looking thing on the passenger side of the manifold.... it's on the gts but not on the gt. The best place to look for the gts manifold is a junkyard OR you can check out Facebook 3G groups. Some of the members sell their used parts. Also check out Mitsubishi 3G forum online. I'm sure they have a section that sells only parts. May The Lord bless you on your search brother!
Way to go bro god bless you keep preaching
thank u for your video and message God bless
My bank 1/1 has gone out, not looking forward to it. Anyone know the best angle to get it out? Better to come from under or wobblie socket through the 1 inch gap on top?
Did you remove it? I have po421 right now.
@@jedidias7091 yea I ended up using a long extension with a wobble attachment on a o2 socket and a long breaker bar.. took about 30minutes
@@trev6783 did you have same code?
@@jedidias7091 I don't remember the code, but I was running lean on and off for a few months then got the code bank 1 sensor 1 heated oxygen sensor blah blah. In my experience when you get the o2 sensor code, either the sensor is bad, its unplugged or the wire is damaged.
@@jedidias7091 you got a gts or gt?
Your an absolute legend my internet dad thank you for putting this together i butchered my spyder bad ima have her in tip top shape now thanks
God bless you 🙏🏻🙏🏻🙏🏻🙏🏻
❤
God bless you brother, what problems could a bad oxygen sensor cause? Because i have my eclipse y wasten gas and not burning it at all
I bad O2 sensor would display as a CEL, or the car would be getting bad gas mileage. 3G cars can get about 28 mpg on the highway. If it's getting less, then check for a CEL light.
AWESOME! Thank you so much, earned a new sub. I bought the whole kit from amazon, but as an IT pc repair guy, cars are new to me, but I refuse to pay a garage for something that I can learn to do, and you definitely helped with that
Great video 💯 thank you
Can someone help my figure out what the black box located at the bottom of 9:15 is? I just got this car and it’s not connected to nothing. I have a hose coming from the aluminum block on the bottom right at 9:09 but it’s not connected to nothing but has a suction. Thanks in advance
Amen Bro. and thanks for help.
Great video. Do you need to take the egr valve off?
You can if you like! It's only two 12mm bolts. When you take it off, try to catch the paper gasket as you loose the EGR valve..or you can buy a new one from AutoZone or O'Reilly's for about $1. When you get the EGR valve off, spray some CARB spray in the passage, and use a Q-Tip to clean the soot out(may have to use like 10 Q-Tips). When you're done, spray a little WD-40 into the passage, let it soak for 30 minutes(or more), pour the WD-40 out of the passage, and put the ERG valve back on.. don't forget the paper gasket.👍😊 Stay Blessed brother!
Thanks for info about the bulbs, but if you think lbgt should be banned, don't claim you're not against us
If you want to know the Truth, the Truth is most people who are homosexual were molested or introduced to sex at a young age...and they are either embarrassed of what happened long ago, or they relish in that lifestyle of pleading their flesh. So when their flesh dies, they will feel like they are dying within their very soul, because that is all they relied on due to their lifestyle. This doesn't just go for people who are homosexual or transgender, but for anyone who loves themselves more than they love God who gives mercy, grace, and salvation to all of the world, but much of the world HATE God by not listening to Him. They love Jesus' healings and miracles, but they hate when Jesus says "You must be born again to enter the Kingdom of God". People HATE that they have to change for the One who gave them life, and air, and all things to help them stay alive. But God still has mercy on them, but how long will they continue treating Jesus Christ as if He isn't the Son of God? How long will they pretend to believe that tomorrow won't be their last day on Earth? For the Word of God says: "And just as each person is destined to die once and after that comes judgment, so also Christ died once for all time as a sacrifice to take away the sins of many people. He will come again, not to deal with our sins, but to bring salvation to all who are eagerly waiting for him." - Hebrews 9:27-28 So death, and then judgement (by Jesus Christ). But God is waiting for you to come to Him for healing for your molestating, your trauma, your depression when you were young. You tried to cover it up(the abuse, the sexuality), by receiving a NEW identity because your you didn't want to see yourself as someone who was contaminated by someone else...someone who you trusted. So you searched for a new way to live...but it's just covering up all the pain and confusing you went through as a young person. Man was made in the image of God, so YOU were made in the image of God. But someone came along and tried to make you into another image...and if they couldn't change your body physically, they could change your thinking...your thinking about YOURSELF...making you believe you are worthless, and need to change. But you are not worthless to our Lord Jesus Christ. Your lifestyle is, but your image is not, because you was made in God's image. Jesus came down from Heaven and died for your own ways...so that if you believe in Him, and follow Him, then your everlasting soul will be saved. This is not a religion. No one is telling you to join a church, but only know Jesus Christ, and why he was spit on, and punched repeatedly, tortured on the Cross for all the evil you and I have done... Find out for yourself...and find out for yourself what He wants you to do with your life. Jesus says: "If you cling to your life you will lose it, but if you give up your life for me, you will find it." Have you given up your life to Jesus Christ? Because He gave up His life for you Kassandra. Be blessed in His Name(the Name of Jesus Christ).
@@theservantwithawrench147 are you speaking as someone who was molested as a child, and turned to religion to help? If yes, you're just projecting. If no, you know even less about the subject than if you had been. And your Bible is no more believable than a book written by me claiming that Abraham Lincoln will come back to life and lead us to everlasting peace
I like this guy! He is thorough and easy to understand 👍
Thank you for the video and the words of wisdom
God bless you.
Extremely helpful, thank you!
No problem brother, have a blessed day!
So I'm having trouble finding a hose that has that restricter in it can I just make one
Well if you're looking for a replacement hose that is exactly like the hose with the restricter..you won't find it. But you can try and just replace it with a regular hose of the same size without the restricter, and see if that helps. Also, you can go to a junkyard, and see if they have any 3g Eclipses (V6), and just take the hose off of one of those.
Once it gets warmer, this is my project for my 2003 GTS. Seein you go through it so easily is giving me confidence. :D
Thank you for watching! This is my 4th time removing the manifold. It gets easier the 2nd time. The first time it took 2 days to take it off..and that was me watching another video on KZread about it, but it wasn't too detailed or clear, so I had to guess some things, and figure it out...and then after a couple times taking it off I decided to make a video revealing the whole process, because there is layers to take off when it comes to this. Just take your time, have a good amount of light near the firewall to know what you're seeing, and feeling with your fingers when back there..and you'll have a good map of what is where. Stay blessed brother!
The information on changing the light was very good and helpful. Thank you
First off I appreciate the time and effort put into this vid SN: 8:52 does anyone know the part number or part name to that sensor? I lost the metal clip and been researching for a brick.
Not sure, what clip part that is. I looked on eBay, and Mitsubishi parts, but nothing. Maybe it comes with the plug, but not sure what the plug is. Perhaps for emissions. Thank you for watching! I've been wanting to do this for months, because there isn't many videos on KZread telling how to take off the manifold.
umm which is the upstream and the down stream?
Upstream is bank 2( the 2 sensors near the radiator and front). Downstream is Bank 1(the 2 sensors behind and after the engine). Think of upstream and downstream this way: River water always flows downstream. The same thing with exhaust gases, they flow down(stream) the exhaust pipelines. Stay blessed brother!
I got a V6 GTS Mitsubishi eclipse syder. I just put a motor in from a Galant. After I plugged everything back up. I didn't get no reading. Only telling me the doors was open. What went wrong
Thank you for sharing
You're welcome! God bless you!
Thankyou for your teaching Mater
AMEN!,.
😂thanks brother! I’m a lover of Sweet Jesus too. Thanks for the instruction with my van & the mini message which encourages me today! What a blessing!👍🏻🙏🏼💞.
Cool.man thanks
Thanks for the vid. Should make more CRV RD1 vdeos I have the same model.
Is there a video available on replacing the bank 2 sensor 2 ?
I already changed bank 2 sensor 2 but didn't record it. But at sometime I'll record how it's done! Thank you for watch and listening, and may The Lord bless your life with His Holy Spirit!
Why did you not just say the o2 sensor socket size. I swear its like pulling teeth to get details like this.
There's only one size for an Oxygen Sensor on any car. Not unless someone is working on a tractor trailer commercial truck. Thank you for watching brother!
His information is correct. He's done it. I've done it. It works and it's the fastest way to improve the appearance of your cars engine compartment.
Engines don't mind dirt but they hate water. Mechanic 2022
Muy buen video Grasias
Jesus christ that is such a clean engine, i thought the video was black and white, how did you clean it that well i need to clean my eclipse like that
I clean my other two car engines the same way in this other video I did: kzread.info/dash/bejne/pq131byhnr29mNI.html May The Lord Jesus bless you in His Spirit!✝️♥️
@@theservantwithawrench147 thank you brother💯
preach brother i love you give the most high god his due GOD (YAHWEH)BLESS YOU 🙏🏾
Thanks for the help with this….bro keep doing what you’re doing.
Thanks for the Words of wisdom as well bruh .
Thank You. Well done video and thank for talk about God !
Anytime brother, stay blessed, and God bless!
Amen bother! Keep doing what you're doing. God bless you.