Пікірлер

• 
  @plrh8tr12 сағат бұрын

  I feel like I can do it after watching this video

• 
  @motehopper23 сағат бұрын

  I need to replace my plastic door handle. Do you have a video on that? Thanks. Good explanation on your part.

• 
  @jpulley19 сағат бұрын

  @@motehopper sorry I don't have a video on that. Good luck on your repair.

• 
  @AlBaNiAnGaNgStA934 күн бұрын

  so you tapped into the Car Stereo Dimmer Wire?

• 
  @jpulleyКүн бұрын

  No, I tapped into the steering wheel controls wire.

• 
  @joeboe47946 күн бұрын

  Can anyone tell me how to where the window sits? Mine is broke and am trying to replace

• 
  @BayouSax10 күн бұрын

  Good example, except for one error; don't allow the fill bottom to empty. If all of the brake fluid empties out of the reservoir, air can get into the system and cause serious issues. Otherwise great video.

• 
  @jpulley10 күн бұрын

  @@BayouSax I see what your getting at but the reservoir never went empty. If it did I definitely would have introduced air into the system. The fill bottle was simply topping off the reservoir as it gets low, but it never went empty. Thanks for the tip anyway.

• 
  @joemore10 күн бұрын

  If your not a tech you should look into it, you have the qualities. Even if you did it part time. Nice Job, you saved yourself $275. 🤜🤛

• 
  @jpulley10 күн бұрын

  @@joemore I'm not a tech, I've just been tinkering with things since I was a kid. Thanks for the compliment!

• 
  @richardbingle309818 күн бұрын

  God bless you brother!

• 
  @jH-fk6pq21 күн бұрын

  Don’t listen to this guy

• 
  @xehvcety23 күн бұрын

  great job dude! very helpful!

• 
  @s6juggs27 күн бұрын

  Can it pump up like that? Doesn’t half of it just drain right back in?

• 
  @jpulley27 күн бұрын

  @@s6juggs a good amount does go back into the sump pit once it shuts off but I just get pumped out the next time it runs. The builder should have installed a check valve or back flow preventer to stop this from happening. I've lived in the house for 5 years and it hasn't caused an issue.

• 
  @mikem-mf8phАй бұрын

  hey quick question please. is there a way to connect that wire to the wiring harness instead of the factory wire?

• 
  @jpulleyАй бұрын

  I suppose it's possible if your wiring harness has a steering wheel control wire in it. Mine didn't.

• 
  @mikem-mf8phАй бұрын

  @@jpulley hmm I see, ill check it out once it arrives. Thanks!

• 
  @stephanienolan3352Ай бұрын

  Amazing video thanks for the walk through. It worked!

• 
  @user-jj8yt4gr2tАй бұрын

  Nice job

• 
  @yawarunnisa1658Ай бұрын

  2024 anybody

• 
  @realWorsinАй бұрын

  Curious if this actually worked

• 
  @jpulleyАй бұрын

  To be honest I couldn't really say if it reduces bugs on the windshield. This truck was never a daily driver for me so I don't have a good gauge on how many bugs is the normal amount. I probably put this one 3-6 months after I got the truck. I do get bugs on the windshield, but I don't really have a frame of reference to compare it to. I just put it on for looks and I think it looks great. It's been a number of years now and it holding up well parked outside year around.

• 
  @twentysubset57Ай бұрын

  I’m having a problem where when I program a button it presses it non stop so it either goes all the way down or all the way up does anyone have a fix for this?

• 
  @marialopez-pc2omАй бұрын

  who can fix my 😮😮tablet charging port its a adroid tablet

• 
  @marialopez-pc2omАй бұрын

  i need mine to be fix

• 
  @donaldjensen1810Ай бұрын

  PO128 could be the coolant temperature sensor switch to the radiator fan. Turn on air conditioning and see if the fan turns on. If so, turn off air and let engine heat up past 200. If radiator fan doesn't come on it's the temperature sensor switch. If the engine never heats up much, the thermostat is stuck open. If it heats up and keeps going up, even after the engine fan comes on, the thermostat is stuck closed. All to be done with the air conditioning off.

• 
  @janelahmeyer2014Ай бұрын

  the newer cars have codes which wires are ruined but many mechanics replace whole package costing $1500-6500 per occurrence. mom n pop car mechanics might be best. squirrel here not deterred by tobasco or peppermint or garlic. help! toyotas encase wires with environment friendly soy covering! a delicious food to rodents. you are a wonderful person not blaming the squirrel wanting to help them. its said mother squirrels always have another back up nest. i dont understand how babies would have survived running engine gets 200 degrees. i ordered a battery operated signal senser you attach to battery that deters them. we will see

• 
  @janelahmeyer2014Ай бұрын

  the newer cars have codes which wires are ruined but many mechanics replace whole package costing $1500-6500 per occurrence. mom n pop car mechanics might be best. squirrel here not deterred by tobasco or peppermint or garlic. help! toyotas encase wires with environment friendly soy covering! a delicious food to rodents. you are a wonderful person not blaming the squirrel wanting to help them. its said mother squirrels always have another back up nest. i dont understand how babies would have survived running engine gets 200 degrees

• 
  @ramonserrano184Ай бұрын

  Great....

• 
  @nicksaunders1152 ай бұрын

  1LC1 is usually because the softener dispenser is clogged and overflowing due to the stupid little disc in the line that gets plugged with softener. The water overflows and hits the leak sensor at the bottom of the unit. Quickest fix I've seen is steaming it through the dispenser. I'd open the line and remove the disc or it will happen again. All the disc is used for is to more evenly distribute the softener. Unnecessary! Or better yet, don't use softener at all. It's not good for the machine even though it's supposedly designed to use it. It's also not good for your fabrics or your skin. It is wax based chemicals and coats and gums up everything causing machine sensors to eventually malfunction and towels to be less absorbent, etc. Use a 1/4 to 1/2 cup of 5% normal household distilled white vinegar instead. You'll be amazed at the results and save all kinds of money on the softener itself, as vinegar is way cheaper. Also will save money in the long run on machine maintenance and new fabrics. This goes for Dryer sheets too. Although they are not as intrusive as the liquid softener. Great video!

• 
  @Nicholas_Triumph_Thruxton2 ай бұрын

  Will this work on the clutch master cylinder system?

• 
  @jpulley2 ай бұрын

  I'm not really sure, maybe someone with more expertise might drop by on this comment.

• 
  @Nicholas_Triumph_Thruxton2 ай бұрын

  @@jpulley Yes, I hope so. I've been having a devil of a time getting my clutch back to normal.

• 
  @Bad_Boy_Supreme.2 ай бұрын

  Thank you this really helped me!!!

• 
  @kdclothing65822 ай бұрын

  mine is stuck at google logo for hours

• 
  @BrunoBigelow2 ай бұрын

  Does anyone know if a 2008 will fit 2014. I know it won't look the best but wondering if it will fit the bed dimensions

• 
  @jpulley2 ай бұрын

  I doubt it since the 2008 is 11th gen and the 2014 is 12th gen. Even if the tailgate dimensions are the same the latch mechanism could be slightly off causing it not to work.

• 
  @mrstl30002 ай бұрын

  So what do i connect key 1 wire to

• 
  @jpulley2 ай бұрын

  Your steering wheel control wire. You'll have to look up which one it is for your vehicle.

• 
  @mrstl30002 ай бұрын

  ​@@jpulley I have a 2012 f150 ion know if it's the same as 04

• 
  @russwoodward82512 ай бұрын

  Great solution using clear tubing for the rain barrel gauge. Thanks!

• 
  @chad6472 ай бұрын

  How many hours will this take total do you think had estimate. Could I do this in 2 nights.

• 
  @jpulley2 ай бұрын

  I think I worked on it for 3-4hr for two days. So 6-8 hrs total.

• 
  @pine17802 ай бұрын

  I accidenlty installed it on my hdd, I can't do it anymore ,I had to move it over. Its so dumb. Its like playing Fallout newvegas on the ps3. It so long to load, the game almost feels unplayable. But I'm just spoiled on modern hardware. I used to enjoy videos a 240p cause my Pc coudln't handle 360p or 480p. 720p used to high definition.

• 
  @prettygurlmp242 ай бұрын

  Thanks

• 
  @wiegehts502 ай бұрын

  So glad you made this video. I have that model. Needed to replace rubber door seal. Thank you

• 
  @WASHINGTONSTATEDOGTRAINER2 ай бұрын

  SWEET ....

• 
  @CPK0072 ай бұрын

  Great video, love that splice technique.

• 
  @travisesterline26282 ай бұрын

  Good video, but too much talking

• 
  @jamieelkin85563 ай бұрын

  Thanks I just did that to my tablet I was loosing my mind !!!

• 
  @realmayhem72583 ай бұрын

  what is the ceased part called? the one your ebrake connects to?

• 
  @jpulley3 ай бұрын

  It's a parking brake lever. You can get this kit here to replace all those parts if you want: amzn.to/3UnM1qh

• 
  @32wolves773 ай бұрын

  My 2011 Chevy Malibu just rolled over 200k yesterday!!!

• 
  @jpulley3 ай бұрын

  Good job! with proper maintenance we can even keep these Chevy's on the road. Mine is sitting at 238k now.

• 
  @Eger1188773 ай бұрын

  Bro this is a great video! I bought this pneumatic bleeder last year. I changed both front calipers on my 2013 Honda Fit and man they were so tough to bleed the 2 person old fashioned way. This vacuum bleeder worked awesome.

• 
  @3four.153 ай бұрын

  Wait so does that mean my actuall remote start is broken??? Or is it just doing that because it’s another way of telling me that the engine light is on due to something that needs to be fixed?

• 
  @jpulley3 ай бұрын

  The car is designed to not remote start if the check engine light is on for any reason. There are tons that things that could be wrong with your car to make the check engine light come on, but once its on the car wont remote start. This is not a malfunction it is trying to stop damage from occurring. Depending on what wrong with car you could start it and still be in the house while the car destroys itself outside. If you were inside the car you could turn it off if you heard some bad noises coming from the car.

• 
  @isabellebranly61833 ай бұрын

  Bonjour ma kia Rio motion essence 2013 avec 86000 km qu compteur a des jours ou elle ne demarre pas je pense peut être que c est le démarreur, mais vous pensez que cela soit le démarreur sachant qu elle a que 85000 km.. ? Si non c est très difficile d accéder au boulon 😮

• 
  @tanyagibson79653 ай бұрын

  Thank you! This was really helpful.

• 
  @bigelroy69733 ай бұрын

  How did you install the bullet grillnat the bottom bumper?

• 
  @jpulley3 ай бұрын

  Here's a video of me installing the grill kzread.info/dash/bejne/dK2L1cVspbG-Yag.htmlsi=WIcmKLcIqr6_l806

• 
  @robyork71093 ай бұрын

  Thanx for the video and reminder of the door handles glad I watched this first 👍👍

• 
  @onlychess8423 ай бұрын

  Bro, I just want an easy fix to put the freaking screen on the tablet, I don't need a massive explanation for how it works and stuff.

• 
  @jpulley3 ай бұрын

  My bad man, I'll be sure you get your money's worth next time. Thanks for the view!

• 
  @deejaydemo29843 ай бұрын

  Informative video 👍🏼I had big bubbles but it was not a solid stream in the hose more like dribbling of oil, would this be from air escaping on the bleed fitting or air compressor not strong enough ? Thank you for any insight.

• 
  @jpulley3 ай бұрын

  It might be air coming in around the bleed fitting if you have unscrewed too far. I would tighten down on it some and try again. It really should take that long to stop showing air bubbles unless you drain out a lot of brake fluid from the system. However these little brake bleeders do require quite a bit of air. I would suggest 20 gallon+ air compressor.

• 
  @deejaydemo29843 ай бұрын

  @@jpulley thank you very much for your reply, will look into it ! 👍🏼🙏🏼

• 
  @PetroMelnychuk3 ай бұрын

  Hey can we get a link where did you buy those headlights

• 
  @jpulley3 ай бұрын

  Sure thing, I've got affiliate links in the description of the video

• 
  @zanderchiefs13773 ай бұрын

  Thanks twin

• 
  @terryndifor3 ай бұрын

  So, if you do this method to reset the password to get in your tablet device, you won't lose all the data, the photos, or the videos that were in it? I haven't tried this yet, so I'm not sure what would happen to the files and everything if it would all still be there

• 
  @jpulley3 ай бұрын

  This is a factory reset you will lose everything. However you will have a working device again. What I always tell people is you already lost your data if you can't access it you don't have it. If you factory reset it you will at least have the device back.