Have someone tried to use Dubble Springs in the Pro5 for Sound upgrade? Because it’s seems to be a terrible Idear to remove the grease on this Model 😂
@4Y9124 күн бұрын
Doublespring doesnt work due to the new design of the Pro5 springs. (You wont get the pawls in with two springs) I went with the Trial-Spring-Kit (HUB561) - gets a good amount louder, easy to install and not to expensive.
@waldowsxxghostxx857727 күн бұрын
So how did it corrode was the laberynth seal not properly set?
@StevenHandDH27 күн бұрын
I had a issue at bike park wales, The cassette started to get loose and the cogs moved separately. When I got a new bike i left this wheel in the back of the van. I think the guy that fixed the bike never put the seal back in correctly. So water got in when i hosed it down. The rest is history
@waldowsxxghostxx857727 күн бұрын
@@StevenHandDH was repairable hopefully?
@samuelparamor3726Ай бұрын
When you have to maintain parts 🤯
@OnlydansmtbАй бұрын
Did you spot a penny on the floor? lol
@StevenHandDHАй бұрын
I seen a rare stick. Wanted to collect it
@NotHam89Ай бұрын
Stupid roots
@NotHam89Ай бұрын
U good oweww
@StevenHandDHАй бұрын
Yeah im good bro, Winded off landing on a tree
@user-li7xp6kb6gАй бұрын
hope you get better bro am here for you
@StevenHandDHАй бұрын
Thanks man, I was ok. Just winded ❤️
@solarheat9016Ай бұрын
I would bathe the whole ratchet area in Pro Gold Pro Link chain lube. That stuff is magic.
@StevenHandDHАй бұрын
Doesn’t work wonders yeah?
@xvidmaxАй бұрын
You need to service your equipment man.
@JJjumpzАй бұрын
That laugh wtf😂
@user-gs5wo4ec3jАй бұрын
Aaaah the Pressure Washer club.
@Alex2OC28 күн бұрын
😂
@StevenHandDH27 күн бұрын
Incorrect, But nice try haha
@Alex2OC27 күн бұрын
@@StevenHandDH I know that’s a common Proplem with the Pro 5. so I will clean it every three months. In the Hope that’s my Hope goes not so Rusty
@Alex2OC27 күн бұрын
And i don’t remove the grease for the sound on this model 😅
@Fosgen2 ай бұрын
Aluminium rusts too, just bit lower pace than steel. Stainless steel is best at resisting outdoors.
@edgarsnezinu14393 ай бұрын
Well it could happen if you do a lot of pressure washing .. I would recommend to take off cassette and double check on green seal maybe it was off some point .. Really shocked to see so rusty inside they are on market maybe 6 months only
@StevenHandDH27 күн бұрын
I had a spacer fitted and the seal never went back in properly
@Yoda-em5mt5 күн бұрын
That makes sense the only way to get that shit green thing in is to take the cassette of and to stop it happening again which it will you need to grease both the paul and spring pivot holes and the drive ring with good grease i use slik honey works well and ake sure the green thing hope call a seal is in its like fitting a tyre in a way it will make sense with the cassette of good luck .
@Editgod19403 ай бұрын
Keep going
@StevenHandDH3 ай бұрын
Cheers Bro!
@SmithLife24243 ай бұрын
Woo hoo I ❤ mtb keep it up 👍
@StevenHandDH3 ай бұрын
Thanks buddy! 🙌🙌
@Onlydansmtb3 ай бұрын
Unreal vid, Dyfi is a place to visit for sure like!
@StevenHandDH3 ай бұрын
Cheers bro, Fuckin love Dyfi! Just wish the weather wasn’t as wet so I could of salvaged more footage
@ignatiustremor3 ай бұрын
Damn dude, these free hub guts look like you send the rear wheel diving and left it for good 😲
@StevenHandDH3 ай бұрын
Do what we do 😂
@powerpowww24493 ай бұрын
Need whole video plz
@StevenHandDH3 ай бұрын
I will upload my Inners video some point over the next day or so
@richardtordel42683 ай бұрын
That’s a nice trail.
@StevenHandDH3 ай бұрын
It’s fast! An at this point I was fooked 😂
@Thatbooboolebron3 ай бұрын
I thought it was big foot
@StevenHandDH3 ай бұрын
Oh he had a big foot after this alright hahaha
@Thatbooboolebron3 ай бұрын
Lol
@arbreacadabra92593 ай бұрын
One of the best song ever ! Let s go man, where is it?
@StevenHandDH3 ай бұрын
Innerliethen, In Scotland! It’s unreal!!
@CaiPiranja3 ай бұрын
Hahahaha😂😂😂😂
@StevenHandDH3 ай бұрын
It happens to the best of us 😂😂
@rmd31383 ай бұрын
What trail is this ?
@StevenHandDH3 ай бұрын
Gold run at Innerliethen mate
@StevenHandDH3 ай бұрын
If your ever going to go up there gimme a shout on YT and we will come along
@user-up9mv1je1y3 ай бұрын
kzread.info/dash/bejne/o4NqpreMe8vIgrg.html
@zeez41783 ай бұрын
Did you lube the rachets up as i didnt see it ?
@zeez41783 ай бұрын
Looks like someone used thin oil instead of grease with is easily washed out within 6 months
@StevenHandDH3 ай бұрын
I bought the wheel from my local bike shop, one thing that did happen is when I was at Bike Park Wales, I had an issue with spacers. They took the cassette off. Possibly by accident the seal popped then. And I never noticed. When I cleaned my bike, this must have been the consequence.
@Pozitivi3 ай бұрын
1:14 birthday vibes! nice cake to start with the laps with da lads!
@StevenHandDH3 ай бұрын
This is how it should be done! Good times, Good lads! Positive vibes only 🙌🙌🙌
@blackydon4 ай бұрын
That’s brilliant.
@StevenHandDH4 ай бұрын
Thank you 🙌🙌 It’s super easy to fly also!
@1jwh14 ай бұрын
You need to remove the cassette and fix the green seal into place, hope do have a tool to make it easier but you can do without, plastic tyre levers are good for this,no metal sharp edges. I’d pop a bit of wet chain lube in the ratchet ring to keep it sweet also I’ve used the dt grease on the pawl and spring seats to keep them moving. Still working as should? Atb John 🏴
@Onlydansmtb4 ай бұрын
Certified RIPPA! \,,/ loving the DH content at inners lad!
@StevenHandDH4 ай бұрын
Its class up there!
@Onlydansmtb4 ай бұрын
@@StevenHandDH Need to get up Golfie ⛳ missing out there!!
@StevenHandDH4 ай бұрын
Thats the next port of call, Ebike on route bro @@Onlydansmtb
@DownhillDesireMTB4 ай бұрын
loving the vids at moment mate, your new cam gives a much better perspective of how steep trails are!!
@StevenHandDH4 ай бұрын
They are certified hand crampers!
@Piratepoilet4 ай бұрын
Hi from New Zealand. I know exactly how you feel. I have just got myself the mini 4 pro and I couldn't be happier m8. Don't stop the waffle and bullshit. It's all part of it aye. I'm just trying to get my head around this little drone but to be honest its not that hard. If you can wipe you're own butt you can fly a DJI mini 4 pro it's so easy 🚁🏴☠️
@StevenHandDH4 ай бұрын
It’s brilliant how easy it is to fly! I also really like the map telling me which direction to fly home. I had to use return to home a few times before I realised this! Hope the weather over there is better than here haha
@MrSzwarz4 ай бұрын
It has never been serviced, with no grease, no cleaning. Water got inside and corroded all parts. I service my DT Swiss freewheel every second month! It takes few minutes same some special light grease.
@StevenHandDH4 ай бұрын
It’s not even six months old, Shouldn’t be like this already
@jamesmincher34354 ай бұрын
Just needs good clean and grease the springs look better quality compared to the pro4/3/2 stronger and longer lasting i cant wait to get pro 5 one day😊
@StevenHandDH4 ай бұрын
All done & dusted
@Yoda-em5mt3 күн бұрын
Apparently the pro 5 is not as strong as the pro4 in the drive ring department was told this directly from hope i have stripped 3 pro 4 drive rings replaced under warranty but still a pain rebuiding wheels its sad now one has any power or rides up steep shit .
@StevenHandDH4 ай бұрын
Massive shout out to Brad, The B roll film is 🙌
@87stupot4 ай бұрын
Nahhhhh 😂
@StevenHandDH4 ай бұрын
Yessss!!! 😂😂😂😂😂
@Onlydansmtb4 ай бұрын
you know it \,,/
@StevenHandDH4 ай бұрын
Inners is mental now mate 😩
@Onlydansmtb4 ай бұрын
@@StevenHandDH looks totally different to what it used to! cant wait to wrap myself round a tree in a couple weeks time now!
@StevenHandDH4 ай бұрын
@Onlydansmtb we are going there in May if you fancy it? Also heading to Dyfi 19/20th of April. Big crew of us going
@TheChonch4 ай бұрын
Looks good! Thanks for sharing
@StevenHandDH4 ай бұрын
No Problem, May do another one
@LDiazMTB4 ай бұрын
w build
@StevenHandDH4 ай бұрын
Its INSANE for the money!!
@butterrotzer12954 ай бұрын
its look absolutely incredible
@StevenHandDH4 ай бұрын
It is, I should of given alot more information over looking back. But Its that good of a bike i forgot how to talk!
@123dwd4 ай бұрын
the way you pressed the freehub on, already attached to the cassette- you have no way to push the green seal into place. it needs to seal up against the hub body. it is a simple push into place but with the cassette attached you cant push on it.
@StevenHandDH4 ай бұрын
I didn’t have a chain whip at the time, I’ll place the seal on tomorrow as I’m borrowing one off a friend. Appreciate you though, Thanks for the heads up 🙌🙌
@123dwd4 ай бұрын
@@StevenHandDH right on! nice work, it cleaned up real nice
@StevenHandDH4 ай бұрын
It got there in the end, NIghtmare. Thought it was a goner haha @@123dwd
@zeez41783 ай бұрын
@@StevenHandDHmake one from an old chain !
@StevenHandDH3 ай бұрын
@@zeez4178I have bought one now 🙌🙌
@Meant2BSent4 ай бұрын
Well done mate, some good footage there. 👍
@StevenHandDH4 ай бұрын
Just sharpening the YT skills haha
@KiteWaldi4 ай бұрын
There should be grease inside
@StevenHandDH4 ай бұрын
I just do not understand where its gone though? I am sure the seal has moved or come off and water has gotten inside while the wheel was turning and washed it out. Absolutely baffled me
@nicholascowen4 ай бұрын
I think you need to get some grease on the free hub paws. I had a similar issue with a vel hub that has actually rusted onto the spindle. There was no grease in there at all. Also didn’t have a serviceable hub so I ended up having to by a new freehub for it.
@StevenHandDH4 ай бұрын
Cheer, Just do not understand how its washed the old grease out though? Absolutely melted my head trying to figure it out. I am sure the seal has popped out and then water got inside.. Back to normal now anyway!
@nicholascowen4 ай бұрын
@@StevenHandDH in my case it wasn’t helped by being in a humid environment when it had been wet. Maybe the back of your van and the temperature of the vehicle could have done it.
@StevenHandDH4 ай бұрын
I would say your not wrong, Just surprised me how the actual grease had been washed out. Going to put more inside it I think
@jnxmck4 ай бұрын
Nice job bud
@StevenHandDH4 ай бұрын
Thank you
@pdtech45244 ай бұрын
Cool aerial footage 😎 Your drone will be a great tool for your videos and will help to tell a story or set a scene. I've added your channel, always good to connect with another drone pilot. 👍
@StevenHandDH4 ай бұрын
I shall add you back bud, Love haveing the drone its setup for some insane views now. Also got the fly more package. So 5 batteries in total. Thats over 3 hours of flight time in total!
@pdtech45244 ай бұрын
@@StevenHandDH Nice one, I'm jealous of course, still flying my original Mavic Mini but have since upgraded to the Mini 2...👍
@StevenHandDH4 ай бұрын
@pdtech4524 treat yourself 🙌🙌🙌
@pdtech45244 ай бұрын
@@StevenHandDH I keep dropping hints to my wife when she asks what I want for my birthday or Christmas....😊
@StevenHandDH4 ай бұрын
@@pdtech4524 Wait till she jumps in the shower, Grab her phone and just start saying DJI MINI PRO 4, DJI MINI PRO 3 in to it while its locked. Let google ads do the rest
@BDX554 ай бұрын
Nice footage. Same here, just got my first drone and getting used to it at the moment.
@StevenHandDH4 ай бұрын
Have you taken it out at all?
@BDX554 ай бұрын
@@StevenHandDH Yes, first time last week when the weather improved for a day! It’s on my channel.
@andersonsridebikes4 ай бұрын
Great video! I've been trying to decide between building a Spire with a dual crown fork and the TR11 for my park bike this year. I'm 6'4" (193cm) and I really like full 29 set ups. I'm leaning towards the TR11. How do you get along with the smaller back wheel?
@StevenHandDH4 ай бұрын
I’m 6ft 2 and this TR11 still feels large. It comes with a headset cup that allows me to shorten the length. You can run the Spire with a 27.5 rear wheel. But then you lose the low setting on the flip chip. Sadly it’s all trial and error! I would say go for the tr11 in my opinion having had them both. You’re gaining an extra 30mm on the suspension. While gaining the mullet setup. After having both bikes the TR11 is more forgiving IMO
@DownhillDesireMTB4 ай бұрын
amazing bike aside for moment, vid production value is awesome!! well done mate!
Пікірлер
Easiest job in the world
Have someone tried to use Dubble Springs in the Pro5 for Sound upgrade? Because it’s seems to be a terrible Idear to remove the grease on this Model 😂
Doublespring doesnt work due to the new design of the Pro5 springs. (You wont get the pawls in with two springs) I went with the Trial-Spring-Kit (HUB561) - gets a good amount louder, easy to install and not to expensive.
So how did it corrode was the laberynth seal not properly set?
I had a issue at bike park wales, The cassette started to get loose and the cogs moved separately. When I got a new bike i left this wheel in the back of the van. I think the guy that fixed the bike never put the seal back in correctly. So water got in when i hosed it down. The rest is history
@@StevenHandDH was repairable hopefully?
When you have to maintain parts 🤯
Did you spot a penny on the floor? lol
I seen a rare stick. Wanted to collect it
Stupid roots
U good oweww
Yeah im good bro, Winded off landing on a tree
hope you get better bro am here for you
Thanks man, I was ok. Just winded ❤️
I would bathe the whole ratchet area in Pro Gold Pro Link chain lube. That stuff is magic.
Doesn’t work wonders yeah?
You need to service your equipment man.
That laugh wtf😂
Aaaah the Pressure Washer club.
😂
Incorrect, But nice try haha
@@StevenHandDH I know that’s a common Proplem with the Pro 5. so I will clean it every three months. In the Hope that’s my Hope goes not so Rusty
And i don’t remove the grease for the sound on this model 😅
Aluminium rusts too, just bit lower pace than steel. Stainless steel is best at resisting outdoors.
Well it could happen if you do a lot of pressure washing .. I would recommend to take off cassette and double check on green seal maybe it was off some point .. Really shocked to see so rusty inside they are on market maybe 6 months only
I had a spacer fitted and the seal never went back in properly
That makes sense the only way to get that shit green thing in is to take the cassette of and to stop it happening again which it will you need to grease both the paul and spring pivot holes and the drive ring with good grease i use slik honey works well and ake sure the green thing hope call a seal is in its like fitting a tyre in a way it will make sense with the cassette of good luck .
Keep going
Cheers Bro!
Woo hoo I ❤ mtb keep it up 👍
Thanks buddy! 🙌🙌
Unreal vid, Dyfi is a place to visit for sure like!
Cheers bro, Fuckin love Dyfi! Just wish the weather wasn’t as wet so I could of salvaged more footage
Damn dude, these free hub guts look like you send the rear wheel diving and left it for good 😲
Do what we do 😂
Need whole video plz
I will upload my Inners video some point over the next day or so
That’s a nice trail.
It’s fast! An at this point I was fooked 😂
I thought it was big foot
Oh he had a big foot after this alright hahaha
Lol
One of the best song ever ! Let s go man, where is it?
Innerliethen, In Scotland! It’s unreal!!
Hahahaha😂😂😂😂
It happens to the best of us 😂😂
What trail is this ?
Gold run at Innerliethen mate
If your ever going to go up there gimme a shout on YT and we will come along
kzread.info/dash/bejne/o4NqpreMe8vIgrg.html
Did you lube the rachets up as i didnt see it ?
Looks like someone used thin oil instead of grease with is easily washed out within 6 months
I bought the wheel from my local bike shop, one thing that did happen is when I was at Bike Park Wales, I had an issue with spacers. They took the cassette off. Possibly by accident the seal popped then. And I never noticed. When I cleaned my bike, this must have been the consequence.
1:14 birthday vibes! nice cake to start with the laps with da lads!
This is how it should be done! Good times, Good lads! Positive vibes only 🙌🙌🙌
That’s brilliant.
Thank you 🙌🙌 It’s super easy to fly also!
You need to remove the cassette and fix the green seal into place, hope do have a tool to make it easier but you can do without, plastic tyre levers are good for this,no metal sharp edges. I’d pop a bit of wet chain lube in the ratchet ring to keep it sweet also I’ve used the dt grease on the pawl and spring seats to keep them moving. Still working as should? Atb John 🏴
Certified RIPPA! \,,/ loving the DH content at inners lad!
Its class up there!
@@StevenHandDH Need to get up Golfie ⛳ missing out there!!
Thats the next port of call, Ebike on route bro @@Onlydansmtb
loving the vids at moment mate, your new cam gives a much better perspective of how steep trails are!!
They are certified hand crampers!
Hi from New Zealand. I know exactly how you feel. I have just got myself the mini 4 pro and I couldn't be happier m8. Don't stop the waffle and bullshit. It's all part of it aye. I'm just trying to get my head around this little drone but to be honest its not that hard. If you can wipe you're own butt you can fly a DJI mini 4 pro it's so easy 🚁🏴☠️
It’s brilliant how easy it is to fly! I also really like the map telling me which direction to fly home. I had to use return to home a few times before I realised this! Hope the weather over there is better than here haha
It has never been serviced, with no grease, no cleaning. Water got inside and corroded all parts. I service my DT Swiss freewheel every second month! It takes few minutes same some special light grease.
It’s not even six months old, Shouldn’t be like this already
Just needs good clean and grease the springs look better quality compared to the pro4/3/2 stronger and longer lasting i cant wait to get pro 5 one day😊
All done & dusted
Apparently the pro 5 is not as strong as the pro4 in the drive ring department was told this directly from hope i have stripped 3 pro 4 drive rings replaced under warranty but still a pain rebuiding wheels its sad now one has any power or rides up steep shit .
Massive shout out to Brad, The B roll film is 🙌
Nahhhhh 😂
Yessss!!! 😂😂😂😂😂
you know it \,,/
Inners is mental now mate 😩
@@StevenHandDH looks totally different to what it used to! cant wait to wrap myself round a tree in a couple weeks time now!
@Onlydansmtb we are going there in May if you fancy it? Also heading to Dyfi 19/20th of April. Big crew of us going
Looks good! Thanks for sharing
No Problem, May do another one
w build
Its INSANE for the money!!
its look absolutely incredible
It is, I should of given alot more information over looking back. But Its that good of a bike i forgot how to talk!
the way you pressed the freehub on, already attached to the cassette- you have no way to push the green seal into place. it needs to seal up against the hub body. it is a simple push into place but with the cassette attached you cant push on it.
I didn’t have a chain whip at the time, I’ll place the seal on tomorrow as I’m borrowing one off a friend. Appreciate you though, Thanks for the heads up 🙌🙌
@@StevenHandDH right on! nice work, it cleaned up real nice
It got there in the end, NIghtmare. Thought it was a goner haha @@123dwd
@@StevenHandDHmake one from an old chain !
@@zeez4178I have bought one now 🙌🙌
Well done mate, some good footage there. 👍
Just sharpening the YT skills haha
There should be grease inside
I just do not understand where its gone though? I am sure the seal has moved or come off and water has gotten inside while the wheel was turning and washed it out. Absolutely baffled me
I think you need to get some grease on the free hub paws. I had a similar issue with a vel hub that has actually rusted onto the spindle. There was no grease in there at all. Also didn’t have a serviceable hub so I ended up having to by a new freehub for it.
Cheer, Just do not understand how its washed the old grease out though? Absolutely melted my head trying to figure it out. I am sure the seal has popped out and then water got inside.. Back to normal now anyway!
@@StevenHandDH in my case it wasn’t helped by being in a humid environment when it had been wet. Maybe the back of your van and the temperature of the vehicle could have done it.
I would say your not wrong, Just surprised me how the actual grease had been washed out. Going to put more inside it I think
Nice job bud
Thank you
Cool aerial footage 😎 Your drone will be a great tool for your videos and will help to tell a story or set a scene. I've added your channel, always good to connect with another drone pilot. 👍
I shall add you back bud, Love haveing the drone its setup for some insane views now. Also got the fly more package. So 5 batteries in total. Thats over 3 hours of flight time in total!
@@StevenHandDH Nice one, I'm jealous of course, still flying my original Mavic Mini but have since upgraded to the Mini 2...👍
@pdtech4524 treat yourself 🙌🙌🙌
@@StevenHandDH I keep dropping hints to my wife when she asks what I want for my birthday or Christmas....😊
@@pdtech4524 Wait till she jumps in the shower, Grab her phone and just start saying DJI MINI PRO 4, DJI MINI PRO 3 in to it while its locked. Let google ads do the rest
Nice footage. Same here, just got my first drone and getting used to it at the moment.
Have you taken it out at all?
@@StevenHandDH Yes, first time last week when the weather improved for a day! It’s on my channel.
Great video! I've been trying to decide between building a Spire with a dual crown fork and the TR11 for my park bike this year. I'm 6'4" (193cm) and I really like full 29 set ups. I'm leaning towards the TR11. How do you get along with the smaller back wheel?
I’m 6ft 2 and this TR11 still feels large. It comes with a headset cup that allows me to shorten the length. You can run the Spire with a 27.5 rear wheel. But then you lose the low setting on the flip chip. Sadly it’s all trial and error! I would say go for the tr11 in my opinion having had them both. You’re gaining an extra 30mm on the suspension. While gaining the mullet setup. After having both bikes the TR11 is more forgiving IMO
amazing bike aside for moment, vid production value is awesome!! well done mate!
Cheers Mate, You wanna do one for your channel?