Always enjoy watching other ZJ rock crawlers. Mine's on 35's, more of an overlander than a rock crawler. Although, she has completed the Rubicon quite handily.
@VenturaITАй бұрын
does it have a locker?
@DrHavok14 ай бұрын
98 5.9 ZJ is one of the best vehicles ever made especially once you upgrade it like this
@johnhill4845 ай бұрын
Very impressive how good that ZJ is doing!
@perlindqvist300311 ай бұрын
Nice Cherokee👍 Regards from Sweden
@longhaulerjatts Жыл бұрын
We made to the stave lake point on stock zj & nissan
@yurisilva8710 Жыл бұрын
I would like to know which axle this zj is using and the marking of the wheel and tires thank you
@TattedTommysTv Жыл бұрын
What axles you running my wj brotheren
@yeraldocaces74112 жыл бұрын
Excelente videos off road!! Felicitaciones!! Muy buenos detalles de preparación del jeep que realmente funcionan!!
@2007bluewolf2 жыл бұрын
Se ve impresionante.. felicitaciones. Cuanto levante tiene? Cambiaste los ejes? Que kit de brazos de suspensión pusiste?? Gracias y Felicitaciones nuevamente
@09kokanee092 жыл бұрын
La elevación es de alrededor de 6 ", los ejes son dana híbridos de los años 60. Sin kit, todos los enlaces están hechos en casa con juntas Hiem y tubos DOM. Nada "atornillado" en este ZJ, todo es personalizado. Enlaces, parachoques, placas protectoras, deslizadores , etc., todo hecho en el patio. Este no es mi equipo, estaba filmando ese día, el tipo que lo construyó es un amigo.
@juanmaldonado41112 жыл бұрын
I want to run 40s on my Ajax, but do I have to swap the axles?
@gburtch24402 жыл бұрын
sweet 4dr on Yotas, yota tk engine?
@HarryPotter-cz8hr2 жыл бұрын
Got a 96 ZJ I6 im building up right now same color an all with the 60s front n rear. 5.38 full spool rear with 40s Yours is a beast I want that hydro too
@Switching-Cars2 жыл бұрын
Verry good driving but you need a new spotter
@cgscprspecialist39372 жыл бұрын
Super rig
@VINNY56742 жыл бұрын
ZJ's take a licking and keep on ticking...
@jesterofatlas57492 жыл бұрын
I want details for fitting 40's on a zj
@ridinhigh2762 жыл бұрын
Straight beast mode brother 💪! Love the ZJ as I have been building and wheeing mine for years now. That's a pretty knarley trail I'm assuming NW somewhere?
@a2js22 жыл бұрын
I'd like a walk around
@AGuyandHisProjects2 жыл бұрын
Looks nice dude! I just started a build series on my 94 zj on KY channel. Probably not looking to go 40" but most likely 37's for now. How top heavy do you feel with the 9" lift?
@blueeyedad2 жыл бұрын
Hello what springs do u have? I'm allso in bc live in surrey 5.9 zj long arms 7 inch lift tj rubicon axles and tcase on 37s
@2rkh2 жыл бұрын
I'm getting ready to put Jeep Wrangler JL axles and 40's under my ZJ. I've already trimmed as much fender as I can. How much lift did u put on yours? Did u move the front axle forward and the rear axle back? If so, how much? What kind of offset & backspacing do u have? Thanks for any help u can give me.
@edapps17212 жыл бұрын
About 9” of lift 2.5” stretch front and rear
@edapps17212 жыл бұрын
Full width tons with 2” spacers. 6” backspace wheels
@2rkh2 жыл бұрын
@@edapps1721Stock, the spring perches are directly over the axles. Did u weld the spring perches on the back side of the front axle and the front side of the rear axle to keep the springs verticle? Thanks again.
@edapps17212 жыл бұрын
@@2rkh the factory perches are actually not centered over the axles. I moved the rear perch location on the axle and moved the upper on the front frame side forward and out
@2rkh2 жыл бұрын
@@edapps1721 Gotcha. Thank you for the info. I have a buddy that is a mechanic and will be doing all the work. He said he's not sure if 40's would fit or if it would be drivable on the street. So I sent him a link to your video. Lol. Thanks for your help.
@whitetrashxj2 жыл бұрын
Narrowed superduty diffs?
@edapps17212 жыл бұрын
Full width and 2” spacers
@tliggexperience2 жыл бұрын
Flowmaster exhaust?
@jayceandjeremysadventures.44412 жыл бұрын
More ZJ
@immelting98342 жыл бұрын
Gear ratios , axles specs ? please
@edapps17212 жыл бұрын
60s. 35 spline chromos. Lockers. 4.88s
@elchiefx42 жыл бұрын
Nice cars🏆, Jeep power 🏞
@elchiefx42 жыл бұрын
👍Good trail🏁 saludos desde Tijuana MX✌
@matty86suk2 жыл бұрын
You must get tons of tie rod roll with that steering setup
@edapps17212 жыл бұрын
Yes. The hydro assist made it much better. On the plus side it has zero bumpsteer
@moshesuharianu86882 жыл бұрын
Suspension works nicely with these big tires,why front sway bar connected
@09kokanee092 жыл бұрын
No reason for the sway bars to still be connected, we drove it 150klm to the trail and was just too lazy, if they needed to be disconnected on the trail we would have, it just performed really well so we didn't bother.
@moshesuharianu86882 жыл бұрын
That means the sway bar is too weak for for Dana 60 which is much heavier then the d30 and won’t do its job on highway Had same problem with mine after d60 install in front,mine was more pronounced because I still have the short arms
@09kokanee092 жыл бұрын
@@moshesuharianu8688 It performed great on the highway. 350+ klm round trip.
Пікірлер
what axles are on there? the jeep looks fantastic
Always enjoy watching other ZJ rock crawlers. Mine's on 35's, more of an overlander than a rock crawler. Although, she has completed the Rubicon quite handily.
does it have a locker?
98 5.9 ZJ is one of the best vehicles ever made especially once you upgrade it like this
Very impressive how good that ZJ is doing!
Nice Cherokee👍 Regards from Sweden
We made to the stave lake point on stock zj & nissan
I would like to know which axle this zj is using and the marking of the wheel and tires thank you
What axles you running my wj brotheren
Excelente videos off road!! Felicitaciones!! Muy buenos detalles de preparación del jeep que realmente funcionan!!
Se ve impresionante.. felicitaciones. Cuanto levante tiene? Cambiaste los ejes? Que kit de brazos de suspensión pusiste?? Gracias y Felicitaciones nuevamente
La elevación es de alrededor de 6 ", los ejes son dana híbridos de los años 60. Sin kit, todos los enlaces están hechos en casa con juntas Hiem y tubos DOM. Nada "atornillado" en este ZJ, todo es personalizado. Enlaces, parachoques, placas protectoras, deslizadores , etc., todo hecho en el patio. Este no es mi equipo, estaba filmando ese día, el tipo que lo construyó es un amigo.
I want to run 40s on my Ajax, but do I have to swap the axles?
sweet 4dr on Yotas, yota tk engine?
Got a 96 ZJ I6 im building up right now same color an all with the 60s front n rear. 5.38 full spool rear with 40s Yours is a beast I want that hydro too
Verry good driving but you need a new spotter
Super rig
ZJ's take a licking and keep on ticking...
I want details for fitting 40's on a zj
Straight beast mode brother 💪! Love the ZJ as I have been building and wheeing mine for years now. That's a pretty knarley trail I'm assuming NW somewhere?
I'd like a walk around
Looks nice dude! I just started a build series on my 94 zj on KY channel. Probably not looking to go 40" but most likely 37's for now. How top heavy do you feel with the 9" lift?
Hello what springs do u have? I'm allso in bc live in surrey 5.9 zj long arms 7 inch lift tj rubicon axles and tcase on 37s
I'm getting ready to put Jeep Wrangler JL axles and 40's under my ZJ. I've already trimmed as much fender as I can. How much lift did u put on yours? Did u move the front axle forward and the rear axle back? If so, how much? What kind of offset & backspacing do u have? Thanks for any help u can give me.
About 9” of lift 2.5” stretch front and rear
Full width tons with 2” spacers. 6” backspace wheels
@@edapps1721Stock, the spring perches are directly over the axles. Did u weld the spring perches on the back side of the front axle and the front side of the rear axle to keep the springs verticle? Thanks again.
@@2rkh the factory perches are actually not centered over the axles. I moved the rear perch location on the axle and moved the upper on the front frame side forward and out
@@edapps1721 Gotcha. Thank you for the info. I have a buddy that is a mechanic and will be doing all the work. He said he's not sure if 40's would fit or if it would be drivable on the street. So I sent him a link to your video. Lol. Thanks for your help.
Narrowed superduty diffs?
Full width and 2” spacers
Flowmaster exhaust?
More ZJ
Gear ratios , axles specs ? please
60s. 35 spline chromos. Lockers. 4.88s
Nice cars🏆, Jeep power 🏞
👍Good trail🏁 saludos desde Tijuana MX✌
You must get tons of tie rod roll with that steering setup
Yes. The hydro assist made it much better. On the plus side it has zero bumpsteer
Suspension works nicely with these big tires,why front sway bar connected
No reason for the sway bars to still be connected, we drove it 150klm to the trail and was just too lazy, if they needed to be disconnected on the trail we would have, it just performed really well so we didn't bother.
That means the sway bar is too weak for for Dana 60 which is much heavier then the d30 and won’t do its job on highway Had same problem with mine after d60 install in front,mine was more pronounced because I still have the short arms
@@moshesuharianu8688 It performed great on the highway. 350+ klm round trip.
Nice Jeep ! Which axles and ratio? Thank you
Hybrid 60s.
That ZJ is an animal show!
34 well spent minutes!!
What area is this ?
Mission.
Hell yeah man
There's some familiar rigs in this
Won't let me view it