Excelente videos off road!! Felicitaciones!! Muy buenos detalles de preparación del jeep que realmente funcionan!!
@DrHavok13 ай бұрын
98 5.9 ZJ is one of the best vehicles ever made especially once you upgrade it like this
@HarryPotter-cz8hr2 жыл бұрын
Got a 96 ZJ I6 im building up right now same color an all with the 60s front n rear. 5.38 full spool rear with 40s Yours is a beast I want that hydro too
@perlindqvist300311 ай бұрын
Nice Cherokee👍 Regards from Sweden
@elchiefx42 жыл бұрын
👍Good trail🏁 saludos desde Tijuana MX✌
@glencrichton14572 жыл бұрын
34 well spent minutes!!
@AGuyandHisProjects2 жыл бұрын
Looks nice dude! I just started a build series on my 94 zj on KY channel. Probably not looking to go 40" but most likely 37's for now. How top heavy do you feel with the 9" lift?
@breakitbillk54292 жыл бұрын
Hell yeah man
@ridinhigh2762 жыл бұрын
Straight beast mode brother 💪! Love the ZJ as I have been building and wheeing mine for years now. That's a pretty knarley trail I'm assuming NW somewhere?
@cgscprspecialist39372 жыл бұрын
Super rig
@a2js22 жыл бұрын
I'd like a walk around
@elchiefx42 жыл бұрын
Nice cars🏆, Jeep power 🏞
@matty86suk2 жыл бұрын
You must get tons of tie rod roll with that steering setup
@edapps1721
2 жыл бұрын
Yes. The hydro assist made it much better. On the plus side it has zero bumpsteer
@yurisilva8710 Жыл бұрын
I would like to know which axle this zj is using and the marking of the wheel and tires thank you
@blueeyedad2 жыл бұрын
Hello what springs do u have? I'm allso in bc live in surrey 5.9 zj long arms 7 inch lift tj rubicon axles and tcase on 37s
@longhaulerjatts Жыл бұрын
We made to the stave lake point on stock zj & nissan
@TattedTommysTv Жыл бұрын
What axles you running my wj brotheren
@juanmaldonado41112 жыл бұрын
I want to run 40s on my Ajax, but do I have to swap the axles?
@2007bluewolf2 жыл бұрын
Se ve impresionante.. felicitaciones. Cuanto levante tiene? Cambiaste los ejes? Que kit de brazos de suspensión pusiste?? Gracias y Felicitaciones nuevamente
@09kokanee09
2 жыл бұрын
La elevación es de alrededor de 6 ", los ejes son dana híbridos de los años 60. Sin kit, todos los enlaces están hechos en casa con juntas Hiem y tubos DOM. Nada "atornillado" en este ZJ, todo es personalizado. Enlaces, parachoques, placas protectoras, deslizadores , etc., todo hecho en el patio. Este no es mi equipo, estaba filmando ese día, el tipo que lo construyó es un amigo.
@VenturaIT19 күн бұрын
does it have a locker?
@jayceandjeremysadventures.44412 жыл бұрын
More ZJ
@tliggexperience2 жыл бұрын
Flowmaster exhaust?
@jesterofatlas57492 жыл бұрын
I want details for fitting 40's on a zj
@Switching-Cars2 жыл бұрын
Verry good driving but you need a new spotter
@Pajero.m572 жыл бұрын
Nice Jeep ! Which axles and ratio? Thank you
@09kokanee09
2 жыл бұрын
Hybrid 60s.
@moshesuharianu86882 жыл бұрын
Suspension works nicely with these big tires,why front sway bar connected
@09kokanee09
2 жыл бұрын
No reason for the sway bars to still be connected, we drove it 150klm to the trail and was just too lazy, if they needed to be disconnected on the trail we would have, it just performed really well so we didn't bother.
@moshesuharianu8688
2 жыл бұрын
That means the sway bar is too weak for for Dana 60 which is much heavier then the d30 and won’t do its job on highway Had same problem with mine after d60 install in front,mine was more pronounced because I still have the short arms
@09kokanee09
2 жыл бұрын
@@moshesuharianu8688 It performed great on the highway. 350+ klm round trip.
@2rkh2 жыл бұрын
I'm getting ready to put Jeep Wrangler JL axles and 40's under my ZJ. I've already trimmed as much fender as I can. How much lift did u put on yours? Did u move the front axle forward and the rear axle back? If so, how much? What kind of offset & backspacing do u have? Thanks for any help u can give me.
@edapps1721
2 жыл бұрын
About 9” of lift 2.5” stretch front and rear
@edapps1721
2 жыл бұрын
Full width tons with 2” spacers. 6” backspace wheels
@2rkh
2 жыл бұрын
@@edapps1721Stock, the spring perches are directly over the axles. Did u weld the spring perches on the back side of the front axle and the front side of the rear axle to keep the springs verticle? Thanks again.
@edapps1721
2 жыл бұрын
@@2rkh the factory perches are actually not centered over the axles. I moved the rear perch location on the axle and moved the upper on the front frame side forward and out
@2rkh
2 жыл бұрын
@@edapps1721 Gotcha. Thank you for the info. I have a buddy that is a mechanic and will be doing all the work. He said he's not sure if 40's would fit or if it would be drivable on the street. So I sent him a link to your video. Lol. Thanks for your help.
Пікірлер: 47
Very impressive how good that ZJ is doing!
That ZJ is an animal show!
Excelente videos off road!! Felicitaciones!! Muy buenos detalles de preparación del jeep que realmente funcionan!!
98 5.9 ZJ is one of the best vehicles ever made especially once you upgrade it like this
Got a 96 ZJ I6 im building up right now same color an all with the 60s front n rear. 5.38 full spool rear with 40s Yours is a beast I want that hydro too
Nice Cherokee👍 Regards from Sweden
👍Good trail🏁 saludos desde Tijuana MX✌
34 well spent minutes!!
Looks nice dude! I just started a build series on my 94 zj on KY channel. Probably not looking to go 40" but most likely 37's for now. How top heavy do you feel with the 9" lift?
Hell yeah man
Straight beast mode brother 💪! Love the ZJ as I have been building and wheeing mine for years now. That's a pretty knarley trail I'm assuming NW somewhere?
Super rig
I'd like a walk around
Nice cars🏆, Jeep power 🏞
You must get tons of tie rod roll with that steering setup
@edapps1721
2 жыл бұрын
Yes. The hydro assist made it much better. On the plus side it has zero bumpsteer
I would like to know which axle this zj is using and the marking of the wheel and tires thank you
Hello what springs do u have? I'm allso in bc live in surrey 5.9 zj long arms 7 inch lift tj rubicon axles and tcase on 37s
We made to the stave lake point on stock zj & nissan
What axles you running my wj brotheren
I want to run 40s on my Ajax, but do I have to swap the axles?
Se ve impresionante.. felicitaciones. Cuanto levante tiene? Cambiaste los ejes? Que kit de brazos de suspensión pusiste?? Gracias y Felicitaciones nuevamente
@09kokanee09
2 жыл бұрын
La elevación es de alrededor de 6 ", los ejes son dana híbridos de los años 60. Sin kit, todos los enlaces están hechos en casa con juntas Hiem y tubos DOM. Nada "atornillado" en este ZJ, todo es personalizado. Enlaces, parachoques, placas protectoras, deslizadores , etc., todo hecho en el patio. Este no es mi equipo, estaba filmando ese día, el tipo que lo construyó es un amigo.
does it have a locker?
More ZJ
Flowmaster exhaust?
I want details for fitting 40's on a zj
Verry good driving but you need a new spotter
Nice Jeep ! Which axles and ratio? Thank you
@09kokanee09
2 жыл бұрын
Hybrid 60s.
Suspension works nicely with these big tires,why front sway bar connected
@09kokanee09
2 жыл бұрын
No reason for the sway bars to still be connected, we drove it 150klm to the trail and was just too lazy, if they needed to be disconnected on the trail we would have, it just performed really well so we didn't bother.
@moshesuharianu8688
2 жыл бұрын
That means the sway bar is too weak for for Dana 60 which is much heavier then the d30 and won’t do its job on highway Had same problem with mine after d60 install in front,mine was more pronounced because I still have the short arms
@09kokanee09
2 жыл бұрын
@@moshesuharianu8688 It performed great on the highway. 350+ klm round trip.
I'm getting ready to put Jeep Wrangler JL axles and 40's under my ZJ. I've already trimmed as much fender as I can. How much lift did u put on yours? Did u move the front axle forward and the rear axle back? If so, how much? What kind of offset & backspacing do u have? Thanks for any help u can give me.
@edapps1721
2 жыл бұрын
About 9” of lift 2.5” stretch front and rear
@edapps1721
2 жыл бұрын
Full width tons with 2” spacers. 6” backspace wheels
@2rkh
2 жыл бұрын
@@edapps1721Stock, the spring perches are directly over the axles. Did u weld the spring perches on the back side of the front axle and the front side of the rear axle to keep the springs verticle? Thanks again.
@edapps1721
2 жыл бұрын
@@2rkh the factory perches are actually not centered over the axles. I moved the rear perch location on the axle and moved the upper on the front frame side forward and out
@2rkh
2 жыл бұрын
@@edapps1721 Gotcha. Thank you for the info. I have a buddy that is a mechanic and will be doing all the work. He said he's not sure if 40's would fit or if it would be drivable on the street. So I sent him a link to your video. Lol. Thanks for your help.
Gear ratios , axles specs ? please
@edapps1721
2 жыл бұрын
60s. 35 spline chromos. Lockers. 4.88s
What area is this ?
@09kokanee09
2 жыл бұрын
Mission.
ZJ's take a licking and keep on ticking...
Narrowed superduty diffs?
@edapps1721
2 жыл бұрын
Full width and 2” spacers