Пікірлер

• 
  @sidney9534Күн бұрын

  If you run into issues with highspots and "oilcanning" (the metal being stretched), I recommend using a shrinking disc. It worked very well for me and is more forgiving than acetylene torch and hammer.

• 
  @MakeItSo23 сағат бұрын

  Thanks for the advice! Today I learned what a shrinking disc is.

• 
  @sogonexd9130Күн бұрын

  Awesome build are you planning on doing the rest of the plastics in the interior black as well like the dash? 👍🏻

• 
  @MakeItSo23 сағат бұрын

  Yes 100%. I also have black door cards from a 1995 Civic Si, and I'll probably pull the light blue headliner and paint it black as well. Thanks for watching!

• 
  @lsvtec93eg6Күн бұрын

  The speedometer sometimes the solder on the back get dry and you need to carefully reflow the solder. If that doesn't work you can just replace the speedometer with another one it's just 3 screws

• 
  @MakeItSoКүн бұрын

  Cool thanks for the info. I'll try some solder first!

• 
  @JoseContreras-mv5yzКүн бұрын

  Damn I was expecting more,but I will wait😂. Good shit though.

• 
  @MakeItSoКүн бұрын

  Thanks for watching. Yeah, I hope to get back into it as soon as possible.

• 
  @DarrenMartin-bw8ziКүн бұрын

  That MAACO quote is absolutely ridiculous!

• 
  @MakeItSoКүн бұрын

  I know, I couldn't believe it.

• 
  @HiFiInsiderКүн бұрын

  first! wow! $6100 for Maco is crazy.

• 
  @MakeItSoКүн бұрын

  Tell me about it!

• 
  @russdiggity3060Ай бұрын

  Touchstone, tri-star and orion were classic

• 
  @MakeItSoАй бұрын

  I can hear each one of them perfectly in my head.

• 
  @miguel-ye4dyАй бұрын

  Gonna do mine this week, gonna source the parts now lol thnx

• 
  @MakeItSoАй бұрын

  Good luck!

• 
  @oldskool1979Ай бұрын

  My seats still great 1990 !

• 
  @MakeItSoАй бұрын

  Nice, Garage kept? I think the sun is the worst enemy of these older Honda's.

• 
  @oldskool1979Ай бұрын

  @@MakeItSo yes

• 
  @darioalcala6995Ай бұрын

  Great video inspired me to do a swap on my EF SEDAN . Maybe just a b20 . Can that be less stressful?

• 
  @MakeItSoАй бұрын

  Haha I don't know about less stressful. Good luck with your swap! Send me some pics when it's ready.

• 
  @erowry22Ай бұрын

  Tri Star is so perfect

• 
  @MakeItSoАй бұрын

  One of the best!

• 
  @fijitearsАй бұрын

  ♨️♨️♨️

• 
  @MakeItSoАй бұрын

  Thanks for watching!

• 
  @buda3d2007Ай бұрын

  Wedding singer is in every place that still sells DVD or VHS, its everywhere!!!

• 
  @MakeItSoАй бұрын

  It's the Adam Sandler effect. I would argue that Wedding Singer is his best film. For me it's just a matter of when it came out and how I first watched it. For me VHS tends to be 80's and very early 90's stuff. Sandler is on the cusp of DVD.

• 
  @charlesspinosa1590Ай бұрын

  Boy, when will you ever be able find time to watch these. Maybe if you have a new baby or something and just have lots of time at home cuddling or something?

• 
  @MakeItSoАй бұрын

  Maybe! I've basically turned my home office into a video rental store at this point.

• 
  @crxsethАй бұрын

  Any HDDVD's? Haha.

• 
  @MakeItSoАй бұрын

  Haha, just biding my time till I get to work on my cars again.

• 
  @Bwana_01Ай бұрын

  Since no one else mentioned it yet, that mountain biker is fit. It may be an ebike but he's covering a lot of ground very quickly.

• 
  @MakeItSoАй бұрын

  He rides neck and neck with the dirt bikes. We beat him uphill, but he smokes us downhill.

• 
  @Erik-rp1hiАй бұрын

  I don't know how many times I've ridden those trails. Since the early 70's when I was 13, nothing but trees for the restrooms. When 13 went out Tejon trail got lost had some hikers tell me go that way which was Pirute creek. That trail was frightening. Getting to Gold Hill road was the happiest day of my life. Still remember that ride to this day. My first experience being lost and sweating Gas on my way to big for pre puberty Bultaco 250 Pushang. Had a steel 1 gal gas can bungee'ed to the front forks.

• 
  @MakeItSoАй бұрын

  That's a great memory, thanks for sharing.

• 
  @dajahvueАй бұрын

  Can you make me some inserts on my si wheels too? Rather do your way for my resto

• 
  @MakeItSoАй бұрын

  www.ebay.com/itm/266744173091?itmmeta=01J04THEPWG9QZGDW6NHEZPZGE&hash=item3e1b311223:g:AsMAAOSwjyZmB1ip Check this out. This guy started making them out of Lazer cut aluminum, they come with 3M adhesive backing too. If I was to do it again I would use these.

• 
  @dajahvueАй бұрын

  Nice job man. How many cans per wheel?

• 
  @MakeItSoАй бұрын

  I think I needed about 3 cans for 4 wheels. But I had 4 cans so I used them.

• 
  @danieldelta2464Ай бұрын

  Here what I think Part 4 should have: Random House Home Video (both variants) Prism Strand/VCI Entertainment Strand Home Video Sony Wonder Media Home Entertainment Video Treasures Jim Henson Productions Jim Henson Home Entertainment (the one that traces the Jim Henson name)

• 
  @MakeItSoАй бұрын

  I don't have any VHS tapes with those intros but I'll be on the lookout. Thanks for watching!

• 
  @JContrer-lt1sbАй бұрын

  hey bro hope you’re doing well, im also redoing my rear suspension and i just wanted to know what spray can of black did you use for the trailing arms

• 
  @MakeItSoАй бұрын

  I've been using this stuff for trailing arms and subframe stuff. Just let it cure for a few days if you can wait and it'll be good to go. www.amazon.com/dp/B000PIK1YC?ref=nb_sb_ss_w_as-reorder_k0_1_16&amp=&crid=3G94TNGG6ILP3&sprefix=rustoleum%2Benamel&th=1

• 
  @joseereyes242 ай бұрын

  Thank you for this video, planning on going b16 in my crx

• 
  @MakeItSo2 ай бұрын

  Glad I could help, best of luck!

• 
  @Iseekoutthetruth2 ай бұрын

  Where is The Crankshaft Sensor on This Motor? When You Take The Crankshaft Bolt Off, Which Way Does It Loosen?

• 
  @MakeItSo2 ай бұрын

  I think the crankshaft sensors on these motors are actually a signal that comes from the distributor. I never took apart the bottom end on this motor so I don't have experience with the crankshaft bolt.

• 
  @Iseekoutthetruth2 ай бұрын

  @@MakeItSo when you took off the pulley, which way does that nut turn to come off?

• 
  @MakeItSo2 ай бұрын

  @@Iseekoutthetruth Lefty loosey, just like all the others.

• 
  @Iseekoutthetruth2 ай бұрын

  @@MakeItSo ok thanks.

• 
  @ReginaIsolde2 ай бұрын

  This product is compact. I think my dad will enjoy

• 
  @MakeItSo2 ай бұрын

  Yes it is. Thanks for watching!

• 
  @danieldelta24642 ай бұрын

  What would make this video more nostalgic is adding more 80s and 90s logos like Random House, Strand/VCI, Sony Wonders, FHE, Prism, Media, and more

• 
  @MakeItSo2 ай бұрын

  Check out my other video for Part 2. I only pull the logos from VHS tapes I actually own but FHE is definitely in there. Part 3 coming soon.

• 
  @dougbdougb2 ай бұрын

  Would be awesome if next time you tried some ND filters. Great content as always!

• 
  @MakeItSo2 ай бұрын

  Great suggestion!

• 
  @markr84292 ай бұрын

  I’m eager to try this with a pi! Thanks for showing the cable and converter. Mostly I’ve been pushing 480i from a computer to a crt. I was wondering if you could tell a major difference when doing 240p instead of 480i?

• 
  @MakeItSo2 ай бұрын

  I can't really tell a difference between 240p and 480i since I haven't compared them directly. The biggest difference here is the RGB output from the Pi to the Component input of the TV which makes the image much sharper and clearer and the native scanlines of the TV much more pronounced than if you were using Composite input.

• 
  @thecsr29442 ай бұрын

  I love this CRX, like the video, I like it because it is a sweet normal CRX, not converted into a Transformers car with a K20 or a 2024 engine, vintage parts, as it should be 👍.

• 
  @MakeItSo2 ай бұрын

  Well said! Thanks for watching!

• 
  @g35tho112 ай бұрын

  How much did you pay for this ??

• 
  @MakeItSo2 ай бұрын

  $1100

• 
  @g35tho112 ай бұрын

  ⁠@@MakeItSook ok , I just got quoted for 1,500

• 
  @rushmatic2 ай бұрын

  I learned about it on my mom’s (then new) ‘91 Accord. 😊 I think Honda might have done this on most of their cars in the 80’s/90’s 🤷🏽‍♂️

• 
  @MakeItSo2 ай бұрын

  So cool!

• 
  @linsdudu3 ай бұрын

  It looks amazing! I hope my project turns out as good as yours!

• 
  @MakeItSo3 ай бұрын

  You got this! Thanks for watching!

• 
  @ferdinandbenjaminco91133 ай бұрын

  Your 1st distributor is an OBD0. It only works on OBD0 ecus. The one installed is an OBD1 and or OBD2 distributor. OBD1 and OBD2 distributors only work ob ODB1 and OBD2 ecus ONLY. Check your ecu. Plus OBD0 distributors are really different in internal parts compared to OBD1 and OBD2 distributors. OBD1 and OBD2 distributors are same internally. THOUGH MOUNTINGS ON OBD0 and OBD1 & 2 are the same, it wont work well. For it to work correctly, match the correct ecu with the correct diatributor

• 
  @MakeItSo3 ай бұрын

  Both of the distributors in this video are OBD0 and so is my ECU. If I had an OBD1 ECU by mistake I would have needed a conversion harness to connect it to the wiring harness which I didn't.

• 
  @johnsaunders65103 ай бұрын

  Thank you so much for the detailed walkthrough

• 
  @MakeItSo3 ай бұрын

  Glad it was helpful!

• 
  @neptune88943 ай бұрын

  Just got a 1991 crx si and was looking at videos on how to do regular maintenance for it and came across this video. Still have a ton to learn but would like to eventually do something like this. Thanks for sharing

• 
  @MakeItSo3 ай бұрын

  Great to hear! I would recommend as a first step replace all the suspension bushings with Energy Suspension polyurethane bushings. I did that to my CRX when I first bought it and it made it feel like it was brand new again. I have a video showing how i did this on my EG Hatchback if you're interested.

• 
  @ZFv-mr6km3 ай бұрын

  Ive used vaseline on valve cover letters before when painting so maybe it would work for you on the H. Or maybe add a tiny bit of vaseline on the spots where it leaked paint and maybe itll help seal it better. Great job! Love the videos. Keep it up

• 
  @MakeItSo3 ай бұрын

  Awesome tips! Thanks for watching!

• 
  @tylerbuilt_chevy_tough51633 ай бұрын

  My concern is if my factory studs will stick out farther than the spacer but I'm going with 1 inch om a 96 accord so we shall see

• 
  @MakeItSo3 ай бұрын

  Should be fine

• 
  @ginjuice6864 ай бұрын

  How’s the AC holding up? With this overhaul I’m sure it’s freezing cold in it now? I’m wanting to do this exact same thing. Great videos

• 
  @MakeItSo3 ай бұрын

  I haven't charged the system yet. Still trying to finish the paint job first.

• 
  @sidney95344 ай бұрын

  2:40 I'm as far from american as you can get, but I rememebr this era from my tweens. My parents read those consipracy tabloids, and of course I got my hands on those, and had nightmares and anxieties about unpeakable horrors the government and media are keeping from us. Actually took me quite a while into adolescence to get over it.

• 
  @MakeItSo3 ай бұрын

  Here in the States we had a newspaper at every grocery store checkout called Weekly World News with cover stories like Bat Boy Found in Cave. I'd also rent things like Alien Autopsy from Blockbuster Video. I found them pretty entertaining and now the whole thing seems very Nostalgic.

• 
  @rogeeerjr4 ай бұрын

  Hey bro, U are Amazing 🫶🏽

• 
  @MakeItSo4 ай бұрын

  Hey, thanks

• 
  @user-og9ms6wy4u4 ай бұрын

  Are these v2.0?

• 
  @MakeItSo4 ай бұрын

  These are the T6 coilovers

• 
  @Undar8ed034 ай бұрын

  I just ran into your build tonight and I watched all 20 parts so far. I have to say that this is what I think about when someone mentions building a Honda. I have a 2000 Civic ex coupe that I want to restore and also a 2005 EP3 that I drove up until recently that my daughter wants when she turns 16. Your build has done more than given me the inspiration to tackle both vehicles by myself and just do it and not focus on how long it takes. Proper build and restore so far I for one appreciate you taking the time to document it all. Thank you brother.

• 
  @MakeItSo4 ай бұрын

  Thank you so much! Comments like yours give me the motivation to keep going. If you have the space, don't set a timeline and work on it when you can. Good luck on both your projects. Thanks for watching.

• 
  @ginjuice6864 ай бұрын

  I have a Integra and would love those exact rims on it. I’ve been researching and noticed the rims won’t clear the brake calipers. What size spacer do you recommend? And love the content! Very good work you got going on!

• 
  @MakeItSo4 ай бұрын

  Thank you so much! I'm really not sure about the Integra brake caliper. I assume those are larger than the stock Civic calipers. I'm using a 1in offset wheel spacer to get these wheels more flush with the fenders but don't know if that would fix your caliper clearance issue.

• 
  @jxhern224 ай бұрын

  What size and brand wheel spacers did you get?

• 
  @MakeItSo4 ай бұрын

  1in spacers from a company called Bonoss. I have another video showing how I measured the offset on my CRX.

• 
  @jamessgarfield73164 ай бұрын

  Hey man! Thanks for the video, my Crx had the same issue of not closing. Seems like an easy fix, I appreciate the enlightenment!

• 
  @MakeItSo4 ай бұрын

  No problem 👍 Glad it was helpful

• 
  @jamessgarfield73164 ай бұрын

  Great video, thanks! I have a 91 si myself 👍

• 
  @MakeItSo4 ай бұрын

  Right on!

• 
  @JoseContreras-mv5yz4 ай бұрын

  Dope. I see the potential outcome already.

• 
  @MakeItSo4 ай бұрын

  I know! So close yet So far to go.

• 
  @rushmatic4 ай бұрын

  For my old ‘90 CRX (same wheels) I used red vinyl (for wrapping) to fill the center cap H. It was back when I was a ricer but it was minimal effort and it lasted as long as I had the CRX. P.S. I love all your updates and your hard work… seeing your progress always motivates me on my current projects!

• 
  @MakeItSo4 ай бұрын

  Great tip! And thanks for watching! Your feedback is motivation to keep making videos.

• 
  @junkcars41734 ай бұрын

  Good job bro.

• 
  @MakeItSo4 ай бұрын

  Thank you!

• 
  @crxseth4 ай бұрын

  Glad you found a good solution! Trial and error is part of the process that makes it fun....after it's done! Haha. Are you going to leave the direction of the wheels that way? It's "backwards" from the standard direction.

• 
  @MakeItSo4 ай бұрын

  I'll be on the lookout for those Vinyl decals next time! I think Honda "reversed" the blade direction between 89 and 90. I have them mounted as they're stamped on the back of the rims for R & L. I double checked some old dealer brochures just to be sure and I think that's how they go. importarchive.com/brochure/hondacrx1990_01

• 
  @crxseth4 ай бұрын

  @@MakeItSo Oh, wow. Never knew that. Interesting.

• 
  @MakeItSo4 ай бұрын

  @@crxseth It always felt backwards to me! 🤷‍♂

• 
  @trickmiller81694 ай бұрын

  I'd have covered the logos with painters tape, then use an x acto blade to cut the outline of the logo on each cap. After you're done, you just peel the tape up.

• 
  @MakeItSo4 ай бұрын

  I should have tried that first for sure. I'll do pretty much anything to avoid masking stuff with tape it seems.