Пікірлер

• 
  @dw3wyant2 күн бұрын

  The "be patient and calm, everything can be fixed" part 👍 😅

• 
  @AncoraImparoPiper3 күн бұрын

  Best explanation I've seen so far. I especially liked your explanation of how to save paint ( paint is very expensive after all) and the different sprayer tip sizes. Will be purchasing this unit soon.

• 
  @tadzius58295 күн бұрын

  Here's a quick and simple solution to get the best results: (1) use a top quality commercial-grade poly, and (2) spray finish it with a quality HPLV spray system like the Fuji Spray System. Save time and get showroom quality results without all of the hassles.

• 
  @tadzius58295 күн бұрын

  And on that note, a high gloss finish makes most furniture look tacky/ daggy, imo, and you can't beat a nice satin finish.

• 
  @stash4207 күн бұрын

  How much did u get the kit

• 
  @richardwang4747 күн бұрын

  I swear i do something dumb as hell at least once a week. I have no idea why im not fired yet 😅. I try hard at least.

• 
  @backyardbuilthondas8 күн бұрын

  This guy sux doesn't know what he's talking about

• 
  @cw515610 күн бұрын

  What he use 2x4 pine

• 
  @martingo268014 күн бұрын

  m dying to see it use on 1/4 insted of 1 gallon paint container. I have small project and only use about 1/4 of a gallon. I dont want an HVLP,. also dont want that expensive Graco quickshot. tell me , can I? What if i cut the suction and primer tube down to where i can just put the quarter can under the muchine and dip the tube straight in? What if i get a shorter blue hose?

• 
  @chrisstewart580916 күн бұрын

  Great video! I just bought 2 of these the other day. I hope my assembly goes as quick as this video. LOL

• 
  @atsaldo4019 күн бұрын

  I'm going to be painting my kids play structure, is this the right sprayer for the job?

• 
  @alecbonner891822 күн бұрын

  What kind of buffing compound?

• 
  @NoArmMissile25 күн бұрын

  Where did you get the vinyl wrap? Could you link it?

• 
  @dandaly186826 күн бұрын

  So, how do you get all the WATER out of the line after Cleanup.??

• 
  @walterwineАй бұрын

  Is this doable without a planer? I can only afford a sander lol

• 
  @conniedeforest9649Ай бұрын

  Having a problem with air leaking from filter valves. There is a little screw in there and that’s where the air is coming out from. How do I fix it?

• 
  @lashellbrown8502Ай бұрын

  As a newbie in the carpentry world, I need to verify if the panel board is 1/4 or 1/2 inch to begin with?

• 
  @JujocoCSАй бұрын

  I have a question. I have 60"inch x 30"in butcher block, I used it as a desk top. I want to remove 2 boards (ei: to reduce the width from 30"inch down to 27". is this a fairly easy process? what basic tools would i need?

• 
  @freckledspeckled540626 күн бұрын

  Circular saw would be the best combination of cheapest/ easiest. To make it really clean, buy a long straight edge and some clamps too, but you COULD freehand follow a drawn on line with the circular saw. Clamp the straight edge to the butcher block, taking into account the offset of the edge of the circular saw to the blade. Then go for it!

• 
  @JujocoCS25 күн бұрын

  @@freckledspeckled5406 I want to take the clean approach. so ill look into a straight edge and clamps. thank you!

• 
  @freckledspeckled540624 күн бұрын

  @JujocoCS you could totally get just a metal meter stick or the like. And the clamps don’t have to be fancy. Good luck!

• 
  @David-oy6ckАй бұрын

  Every airless sprayer requires you to pull water in after painting with water-based paint.

• 
  @calf6445Ай бұрын

  Stay safe 😀

• 
  @timadams3975Ай бұрын

  Thanks for the vid. I've put 4 coats of polyurethane on a small table top I have built. The second coat was basically perfect looking, but I was afraid it wasn't enough so I sanded with 220 grit which was really a mistake. After the third coat I basically sanded it off with a brown paper towel on a square type electric sander. I have the fourth coat on now. It looks pretty good although I can see some brush marks in it. It's not been sanded yet and I'm wondering what grit of sandpaper I should use?

• 
  @jclcrow2621Ай бұрын

  Thanks, man. You saved my butt. Was going to start out with much rougher selection of papers

• 
  @BlackKokane706Ай бұрын

  How far in do you drill?

• 
  @nano0773Ай бұрын

  You forget talk about the filter in the gun!!???

• 
  @Jean-Michel.SynnottАй бұрын

  Did the e02 came back?

• 
  @Ben.Builds.Ай бұрын

  So far it has not come back

• 
  @Dawood4Ай бұрын

  Thanks for the tips. I'm going to prime and flush a used one im going to look at today on facebook marketplace. Should be a good way to see if they properly cleaned it.

• 
  @Ballinonabudget777Ай бұрын

  Did it work? Thanks for the video!

• 
  @Ben.Builds.Ай бұрын

  Yes it still works!

• 
  @mrmayhemtvАй бұрын

  The only good thing about this jig, is that you can use it the other way around to support the actual drawer box and kind of perfectly align the drawer slide before screwing (the part that is not shown in this video). Other than that, is just another crap of jig Kreg has done in my opinion, because you still have to measure twice, one per side, and mark where the slide needs to be placed, and if you have multiple drawers, the whole thing ends up in a huge mess, I guarantee!!! Anyways, great work man!

• 
  @TheDevinfletcherАй бұрын

  Can you please share what kind of hinges these are or is there anything special you have to do.

• 
  @kristenmaves5732 ай бұрын

  Thank you for your video, so helpful! I am a beginner and want to build one for my kitchen. What types of wood could I use to add some variation in color? Would cherry add some pink into it? Also what size dimensions?

• 
  @johnbehneman15462 ай бұрын

  ANYBODY CAN DO IT!!!!

• 
  @johnbehneman15462 ай бұрын

  BUTCHER BLOCK IS CHEAP AND EASY TO MAKE. GREAT FOR THE SHOP OR THE KITCHEN!!!

• 
  @johnbehneman15462 ай бұрын

  TOTALLY AWSOME SHOP UPGRADE!!!!!

• 
  @johnbehneman15462 ай бұрын

  TOTALLY AWSOME VIDEO BEN!!!!

• 
  @singletrackflow2 ай бұрын

  Great video! I don't have a bench planner, would a belt sander work?

• 
  @ledritahiraj88292 ай бұрын

  I’m super of 44 building apartments and magum prox17 saved me a lot time and using half the paint I was using with rollers and brushes and it’s easy to use just make sure clean the lines every use it’s very very important to keep the lines unclogged and ready to use every time

• 
  @emceeboogieboots16082 ай бұрын

  Anyone had any experience with oil based paint with one of these units? I have just ordered one, but will use it mostly with water based paint

• 
  @TomasCirip2 ай бұрын

  If I were a professional painter, I'd just buy a shorter hose to waste less paint and have a longer hose for projects requiring more mobility. Stupid idea?

• 
  @tabithablackwellsamsel9632 ай бұрын

  My project becomes tacky when I sand it. what am I doing wrong?

• 
  @bootburner45443 ай бұрын

  How did you cover the 3 sides of the 10' x 10' canopy with plastic sheet that's only 10' x 25'? That doesn't add up 🤔😆

• 
  @JR-kk6ce3 ай бұрын

  Thank you for the video. I'm thinking of getting these cabinets. However, information on how to instal them and how to attach them to each other is lacking. Does anyone know of any installation videos or instructions specific to this type of cabinets?

• 
  @progrexion15753 ай бұрын

  The awkward one hand in the pocket while sanding was so odd like u knew u had the camera on u and u didn't know what to do with ur hand he felt embarrassed even know he was alone

• 
  @danaclendenin96343 ай бұрын

  Nothing I’m doing is workingggg

• 
  @amohtash3 ай бұрын

  Thank you for your video. Very helpful. Have you tried the green FFLP tips with a blue guards? They are low pressure fine finish tips that are better for the cabinets, use less paints and need less pressure making them last longer. Your point on cleaning times and amount of paint lost by using this is very accurate. But that is the price to pay to put the hose directly into the paint bucket instead of using a small container on the sprayer. Thank you for the tips to save paint.

• 
  @user-qu2ci2sk4x3 ай бұрын

  I have two of them and they have way outlasted what I thought they would have lasted for. A great tip when using these is to put the pickup tube in a 5 gallon paint strainer and tape it up high on the hose. This acts as a pre-filter before it goes into the pump. I do this because the only filter on this sprayers is in the spray gun.

• 
  @richardwallace24583 ай бұрын

  Can I ask what the purpose of the blue strip of aluminium is for? Any tips for the slight bit very annoying wobble in the guide slot?

• 
  @TheStobyReport3 ай бұрын

  Fail

• 
  @ynotstand3 ай бұрын

  Thank you for making the video. We just purchased these cabinets for our kitchen remodel and I was a little apprehensive about how difficult they would be to install and how sturdy they would be… but you really set my mind at ease. Thank you so much.

• 
  @Ben.Builds.3 ай бұрын

  You are welcome! I am installing these in another kitchen as well!

• 
  @ojm374 ай бұрын

  How do you activate it? I purchased the copilot 360 package and still haven't figured out how to turn it on (yes, I'm old).

• 
  @otavioteixeira3207Ай бұрын

  I suggest you to read the car manual

• 
  @jasonperkins68474 ай бұрын

  Very nice man. Trying to get bar top ideas.

• 
  @jhardy07864 ай бұрын

  The Allen wrench’s are in the Handel of the saw