Perfect Presentation ! Great details and knowledge ! Thanks...Miami
@imouse324621 күн бұрын
Nice piece of kit. 👍
@Robertalcine21 күн бұрын
hey Mark my Mep 804A will not stay running. starts up and shuts right down over speed light and under voltage. any suggestions
@edavis25 күн бұрын
What series number batteries did you use to fit in the battery compartment?
@coyotePAC325 күн бұрын
You forgot the Dead Crank Switch and Battle Short - customers should have them disconnected because they don''t need them.
@DragonballzgtvegetaАй бұрын
Built to last
@hectorrivera6149Ай бұрын
Thank you maestro. Just what I was looking for. Just picked one up almost exactly the same except mine has a digital display. Please let me know if you have any info on how the display works.
@lenshandcraftedwoodsigns6033Ай бұрын
I have just started turning, this is very interesting.
@user-dy5lg7yr2lАй бұрын
❤
@RairinCru2 ай бұрын
My generator is the same one from this video it has fuel but won't prime what should I do
@jeetime94362 ай бұрын
Your an expert. The purchaser is going to be happy because I am sure he will get the help he needs. Great Job
@markharvey56663 ай бұрын
Do you use "off Road" Diesel??
@user-lc4bo3ic3g3 ай бұрын
I've been trying to get one of these generators off of gov auction thinking they would be cheap but keep getting out bid . I think now i know why.
@keithburns5063 ай бұрын
Where can I find a 15000 kw generator like the one in your video. Semper Fi!
@Stucknnmx3 ай бұрын
Hey Mark. I recently came into one of these and cannot for the life of me get it to run off of the auxiliary line. I’ve confirmed the float switch is in place in the tank and freely moving but the pump doesn’t seem to fire up ever to move fuel from the backup tank. Any tips on troubleshooting?
@JamesCannon-it3bs3 ай бұрын
Are you selling any of your surplus tanks
@dystopiandream71344 ай бұрын
This is a man oozing with character and pride. Much respect to you, sir.
@DanielinLaTuna5 ай бұрын
It’s a beautiful machine. Thanks for sharing
@jesuschrist_is.the.reason5 ай бұрын
How did you haul the trailer we are having problems loading it and the hitch is too low for the trailer to hook up.
@mac99135 ай бұрын
I do wonder about the security of these generations when used...how much unwanter interest they recieve
@victorcarreras24995 ай бұрын
Good generator,I just to fix those in the army
@gordonwelcher95985 ай бұрын
The wiring near the oil dipstick could be better. I guess it works ok.
@jamesmatheson51155 ай бұрын
This man is right, oil is cheap, people changing oil every 3000 miles for Diesels, will have a happier Diesel, people who change their oil every 6000 miles will have a happier petrol driven motor vehicle, people who change their oils on their motor bikes every 3000 miles will have a happier motor bike, if you had a Generator with Inverter, you would expect it to operate over the 24hr cycle to be no more then 1/2 gallon per hour, as a inverter gen set will only use 1/4 gallon of fuel per hour at 50% load, these army gen sets are cheap to buy but expensive to run, its a trade off, my suggestion is to do your maths, as for your needs it might be cheaper to but a Gen Set with Inverter.
@basspig5 ай бұрын
I've never been able to find one of these locals to my area. It seems they're always a thousand or 1500 miles or more away.
@user-wr2vq8yn4g6 ай бұрын
Thanks, for the info you are a good instructor . Enjoyed
@BKLevi7 ай бұрын
Sold me!
@curmudgeinnak7 ай бұрын
Is h still dealing with gens?
@martinhutt40689 ай бұрын
How would one go about buying a 15KW gen, from you please? And could it be set up for auto start? Cheers.
@trevorbeckett324811 ай бұрын
Too much talking,learnt nothing
@bb21again.67 Жыл бұрын
What capacity generator would be needed to comfortably power a modern home in an emergency?
@DanielinLaTuna5 ай бұрын
7-kW would be the minimum. This machine is a good match
@slesar-podpolshcyk Жыл бұрын
Мотор схожий на Isuzu 2.4л, класний генератор.
@technology_pro Жыл бұрын
9:24 Got um!!
@johaneshansen5843 Жыл бұрын
Hi Mark, is the print result on par with other brand (canon pro 4100) ? for photo print on semigloss media.
@johnurbanski2057 Жыл бұрын
Over 2 years later. HP updated the HP Click, I can print pdf files. I will always print my posters created in Illustrator in pdf format because the colors match what I see on the computer screen and the quality is so much better than printing them as image files. I can resize them without loss of quality. The software is still a disaster, and other reviewers agree with me. The firmware is updated. The printer would occasionally run the 45 minute 5 step print system check. This year it started running it almost every day again. HP support recommended that I not turn it off, but to unplug the printer at the end of the day. That "worked" for about a week before it started running the print system check again. The next recommendation from HP was to leave the printer on all the time and let it go into sleep mode. Again, that "worked" for a little bit. But the printer would randomly come out of sleep mode. One night it came back on and stayed on all night without going into sleep mode. I doubled checked the settings, it is set to go into sleep mode after 20 minutes. It does not go into sleep mode anymore. This printer is faulty, and has been faulty from day one and HP refuses to do anything about it. Because this is a software problem, it is not covered under the warranty and they will not come out to look at it. I have asked many times for them to look at it. They will not send a tech out for a software problem. Every time I talk to HP support, I ask why the printer runs the 5 step print system check. Someone designed this printer and software. There IS a reason why it does this! When I print my first poster after turning it on, it will run a short print system check. But why it continues and runs a 45 minute 5 step print system check, they still don't have an answer. I see on the HP website for the Z9 and Z6, "hurry, last few remaining". And they are on sale. I hope that is a sign they are discontinuing them and fixing the errors for a new series.
@brentmcmahon8188 Жыл бұрын
Where do live at I’ll meet you half way if the price is right .
@robbie8029 Жыл бұрын
Thank you Mark and Dr Robinson for your work. I purchased The Lindquist Legacy, Spalted Wood and Spalting 101 all by Dr Sara Robinson. I am glad to be a small part of the research done by Dr. Robinson. I was very much inspired by The Lindquist Legacy and sculpting. Yes, I have been a member of the local AAW chapter and there are those who think you should do it a certain way and have made critical comments of those demonstrating. It is an aspect I have not liked but I must remind myself that many more are not that way. I really like Mark's philosophy of using your own processes particularly in ways you enjoy to get to the end result.
@kamrankhan-dn8sl Жыл бұрын
How to clear high temperature code of ten seventy generator?
@GennaroDellaVolpe-kg2wy Жыл бұрын
Hi, i would ask to you a question about the measure of the main unit: could you give the approximately height dimension w/o the stand supports? Thank you very much
@erikvogels5227 Жыл бұрын
very interesting, thank you!
@TheRealSp00k Жыл бұрын
Thank you im on guard and i touched something 😅oooppss
@simeonkrompart6517 Жыл бұрын
I'm just starting into spalting myself. I make guitars, and my old room mate has a fallen box elder tree. ive been getting tops from it in exchange for cutting fire wood. I've really got some beautiful cuts out of it!
@dustycornerscalgary2208 Жыл бұрын
I just discovered you two and your work with spalting and wow what amazing information. My son in-law picks up wood and throws them in his yard for a time before bringing me pieces to turn. They are absolutely beautiful but prone to punky conditions. Being able to spalt in a short time would make turning a lot easier. I’m definitely going to try doing my own once I get caught up with all the wood at hand. Thanks for the videos they are the greatest learning tool I have next to print. Stay safe and keep up the great work related to spalting!
@NickyNiclas Жыл бұрын
kay-double-you aka kilowatt, yes, sometimes saying the whole word is easier than saying the abbreviation :D
@Whyareyoubro Жыл бұрын
Hey Uncle
@jimhays1896 Жыл бұрын
How hard is it to get a registration plate for the military trailer? I am also in Florida. Great video
@Sentencedtolife Жыл бұрын
where can I buy fungi in canada?
@plikeputin9149 Жыл бұрын
Mine has everything n refused to start, what can I do??
@ientu-iencongnghiepbinhmin2811 Жыл бұрын
sorry. Can I ask, why do I search on the internet for the petbow generator, but I can't find any information, and I want to look up that generator line. Thank you. hope you answer me.
Пікірлер
Perfect Presentation ! Great details and knowledge ! Thanks...Miami
Nice piece of kit. 👍
hey Mark my Mep 804A will not stay running. starts up and shuts right down over speed light and under voltage. any suggestions
What series number batteries did you use to fit in the battery compartment?
You forgot the Dead Crank Switch and Battle Short - customers should have them disconnected because they don''t need them.
Built to last
Thank you maestro. Just what I was looking for. Just picked one up almost exactly the same except mine has a digital display. Please let me know if you have any info on how the display works.
I have just started turning, this is very interesting.
❤
My generator is the same one from this video it has fuel but won't prime what should I do
Your an expert. The purchaser is going to be happy because I am sure he will get the help he needs. Great Job
Do you use "off Road" Diesel??
I've been trying to get one of these generators off of gov auction thinking they would be cheap but keep getting out bid . I think now i know why.
Where can I find a 15000 kw generator like the one in your video. Semper Fi!
Hey Mark. I recently came into one of these and cannot for the life of me get it to run off of the auxiliary line. I’ve confirmed the float switch is in place in the tank and freely moving but the pump doesn’t seem to fire up ever to move fuel from the backup tank. Any tips on troubleshooting?
Are you selling any of your surplus tanks
This is a man oozing with character and pride. Much respect to you, sir.
It’s a beautiful machine. Thanks for sharing
How did you haul the trailer we are having problems loading it and the hitch is too low for the trailer to hook up.
I do wonder about the security of these generations when used...how much unwanter interest they recieve
Good generator,I just to fix those in the army
The wiring near the oil dipstick could be better. I guess it works ok.
This man is right, oil is cheap, people changing oil every 3000 miles for Diesels, will have a happier Diesel, people who change their oil every 6000 miles will have a happier petrol driven motor vehicle, people who change their oils on their motor bikes every 3000 miles will have a happier motor bike, if you had a Generator with Inverter, you would expect it to operate over the 24hr cycle to be no more then 1/2 gallon per hour, as a inverter gen set will only use 1/4 gallon of fuel per hour at 50% load, these army gen sets are cheap to buy but expensive to run, its a trade off, my suggestion is to do your maths, as for your needs it might be cheaper to but a Gen Set with Inverter.
I've never been able to find one of these locals to my area. It seems they're always a thousand or 1500 miles or more away.
Thanks, for the info you are a good instructor . Enjoyed
Sold me!
Is h still dealing with gens?
How would one go about buying a 15KW gen, from you please? And could it be set up for auto start? Cheers.
Too much talking,learnt nothing
What capacity generator would be needed to comfortably power a modern home in an emergency?
7-kW would be the minimum. This machine is a good match
Мотор схожий на Isuzu 2.4л, класний генератор.
9:24 Got um!!
Hi Mark, is the print result on par with other brand (canon pro 4100) ? for photo print on semigloss media.
Over 2 years later. HP updated the HP Click, I can print pdf files. I will always print my posters created in Illustrator in pdf format because the colors match what I see on the computer screen and the quality is so much better than printing them as image files. I can resize them without loss of quality. The software is still a disaster, and other reviewers agree with me. The firmware is updated. The printer would occasionally run the 45 minute 5 step print system check. This year it started running it almost every day again. HP support recommended that I not turn it off, but to unplug the printer at the end of the day. That "worked" for about a week before it started running the print system check again. The next recommendation from HP was to leave the printer on all the time and let it go into sleep mode. Again, that "worked" for a little bit. But the printer would randomly come out of sleep mode. One night it came back on and stayed on all night without going into sleep mode. I doubled checked the settings, it is set to go into sleep mode after 20 minutes. It does not go into sleep mode anymore. This printer is faulty, and has been faulty from day one and HP refuses to do anything about it. Because this is a software problem, it is not covered under the warranty and they will not come out to look at it. I have asked many times for them to look at it. They will not send a tech out for a software problem. Every time I talk to HP support, I ask why the printer runs the 5 step print system check. Someone designed this printer and software. There IS a reason why it does this! When I print my first poster after turning it on, it will run a short print system check. But why it continues and runs a 45 minute 5 step print system check, they still don't have an answer. I see on the HP website for the Z9 and Z6, "hurry, last few remaining". And they are on sale. I hope that is a sign they are discontinuing them and fixing the errors for a new series.
Where do live at I’ll meet you half way if the price is right .
Thank you Mark and Dr Robinson for your work. I purchased The Lindquist Legacy, Spalted Wood and Spalting 101 all by Dr Sara Robinson. I am glad to be a small part of the research done by Dr. Robinson. I was very much inspired by The Lindquist Legacy and sculpting. Yes, I have been a member of the local AAW chapter and there are those who think you should do it a certain way and have made critical comments of those demonstrating. It is an aspect I have not liked but I must remind myself that many more are not that way. I really like Mark's philosophy of using your own processes particularly in ways you enjoy to get to the end result.
How to clear high temperature code of ten seventy generator?
Hi, i would ask to you a question about the measure of the main unit: could you give the approximately height dimension w/o the stand supports? Thank you very much
very interesting, thank you!
Thank you im on guard and i touched something 😅oooppss
I'm just starting into spalting myself. I make guitars, and my old room mate has a fallen box elder tree. ive been getting tops from it in exchange for cutting fire wood. I've really got some beautiful cuts out of it!
I just discovered you two and your work with spalting and wow what amazing information. My son in-law picks up wood and throws them in his yard for a time before bringing me pieces to turn. They are absolutely beautiful but prone to punky conditions. Being able to spalt in a short time would make turning a lot easier. I’m definitely going to try doing my own once I get caught up with all the wood at hand. Thanks for the videos they are the greatest learning tool I have next to print. Stay safe and keep up the great work related to spalting!
kay-double-you aka kilowatt, yes, sometimes saying the whole word is easier than saying the abbreviation :D
Hey Uncle
How hard is it to get a registration plate for the military trailer? I am also in Florida. Great video
where can I buy fungi in canada?
Mine has everything n refused to start, what can I do??
sorry. Can I ask, why do I search on the internet for the petbow generator, but I can't find any information, and I want to look up that generator line. Thank you. hope you answer me.
35:48 dust it please.
Great information