I have done this in a few hours and cut both heat shields to get them out. The cat was the worst part to get out what a stupid design. Cost me a few nerves and some cuts in my hands.
@robertchipman995Ай бұрын
What happens now that I have rounded the 10mm bolt that connects the cat to the turbo?? Seriously yes..??
@DayNtheLife18811 ай бұрын
What’s plugged into the back of intake?
@SmDWeed Жыл бұрын
Great thing they cutted out how to remove the heatshields, looks like a tight as hell fit.
@dap1772 жыл бұрын
sounds good.
@XBLACKWHITEX1712 жыл бұрын
8:38 thats definitely not the cobb mount and is the efocus mount.
@seamalulion2 жыл бұрын
what about the heat shield? I mean won't the engine compartment get hotter with the headers showing?
@STDailyDriverEU2 жыл бұрын
Nice one man.
@Mud_Kip2 жыл бұрын
this video is good but also a bit frustrating because he rushes a lot of steps and should have slowed down a bit and elaborated
@mistertubby3 жыл бұрын
IS no one going to talk about the foam pads around the cowl vents? I live in Canada and would love to not have them fill with snow. NExt they will tell me there is a foam piece for the top of the rear hatch to keep snow out.
@hugomontoya85873 жыл бұрын
Omg hey! I think I saw one of these red fiestas for sale on CarGurus not long ago. Had low mileage and same paint with decals. I should've bought it 😔. It was going for 13k
@funderberg3 жыл бұрын
Thank you for a great detailed video. This method works great for a 2013 Ford Focus Titanium as well!
@jak3est3 жыл бұрын
I just did a whoosh catted downpipe. I didnt remove the manifold heat shield just the downpipe one. One bolt snapped but dont need to worry about that. Use pb blaster on everything and go slow everything else came off no problem. I also was able to snake the old dp out by just moving the exhaust off to the right then left after taking it out of the blue hanger. I had my resonator removed not sure if it makes a difference but i was worried id have to take the brace halfway down the car off to move the exhaust but no didnt need too
@snowbunny_st87643 жыл бұрын
Will this fit on a 2018 focus st?
@Ringland_Failure3 жыл бұрын
I don’t trust anyone with a sound symposer
@cenzofrisina65173 жыл бұрын
lol. not much different from oem sound. yes I know the 4b11 sounds like that but a muffler can alter the sound and the tips look oem also. go a little more crazy. a 5 inch tips will fit and maybe give it a burnt tip. so boring cobb
@wrcblu4 жыл бұрын
You didn't reinstall the downpipe and header heatsheild?
@HalenTaylor024 жыл бұрын
Well I’ve been going for an hour and can’t get past step one. Rusty bolts :•(
@koolone37914 жыл бұрын
Too many tubes to fail and leak
@deejayimm4 жыл бұрын
I love these install videos done by companies that are selling the products. Because if they weren't selling the product this video would literally be three days long, and demonitized due to foul language.
@robertchipman995Ай бұрын
I am on day 4
@previoustenant99154 жыл бұрын
la di da di da cobb on my knob
@zachsackers63024 жыл бұрын
Now take your whole engine apart in your garage. Now install the down pipe
@M3rcy005 жыл бұрын
Why is my bolts 14mm ? The bolts connecting to the cat ? I'm confused... and it's only spinning not coming out
@josephauler61655 жыл бұрын
how well does this filter actually filter? I did notice more sound and as if the car breathed better but is it comparable in filtration to the oem?
@williamtimns25505 жыл бұрын
How did you get the car on the stands
@bensullivan5 жыл бұрын
At the 0:34 mark it says "Safely Jack Up Your Fiesta" but the back end of the car is literally sitting on a stack of bricks. A fcukin stack of bricks. What the WHAT? In case it's not clear, that is not safe. Don't do that, folks.
@ryannitoi29933 жыл бұрын
lmfao noticed that too. They aren't even nicely placed just kinda there lol
@RocketRidez5 жыл бұрын
"Because of the cat, you get zero flames" in other words. Why wouldnt you want flames??
@indyfist94664 жыл бұрын
FUMES
@flymdjets5 жыл бұрын
Hillbilly jackstands...
@jteds7115 жыл бұрын
What is the part number/name of the piece of the side fender where you've placed the jacks? I need to buy a new one.
@TheStifler19925 жыл бұрын
Aaah, just took me 3 years and 7 months but i did it you guys :) its very easy
@-.__.__.-Rad5 жыл бұрын
Did you guys put all bolts back in the right places? This is crazy:)
@torquesoftware5 жыл бұрын
EGG SAUCE
@Strages_Powers5 жыл бұрын
Thank you
@IamChanceLove6 жыл бұрын
Whoever made this video acts like everything is able to be hand loosened. Fuck you
@charliejohn16 жыл бұрын
I'm not mechanically incline but after watching your video, even I can do this. Thank you for your detailed video.
@cotswoldsview10046 жыл бұрын
what's the foam for on the scuttle?
@Y2Gambino6 жыл бұрын
always disconnect your battery.. Wow great video showing safety.. SMH moron
@deviiinnc26906 жыл бұрын
why the fuck no one help explain how to take heatshield off , bunch of fuckk head ass niggas
@JBLewis6 жыл бұрын
The recip saw will work much more efficiently when the shoe is pressed up against the work being cut. If the saw and work are just bouncing around, nothing is being cut.
@Neptune86 жыл бұрын
This is why all the exhaust shops near me are quoting me higher than usual prices.. my gti full intake install was $200 I was just quoted $320 to install the down pipe..after watching this video it seems like this is a pain in the ass
@RayRiv736 жыл бұрын
What a PITA install.
@DashnCars6 жыл бұрын
"Squeeze and it releases" *Same*
@S1k_brando6 жыл бұрын
I cross threaded the bolt when securing the intake what is the piece called that the intake is secured to the bolt snapped
@Slocus_Frank6 жыл бұрын
If I hear remove one more time.....
@SuperBenjr6 жыл бұрын
Is it that difficult to change the swaybar in a 2016 ford fusion 2.0 turbo?
@SuperBenjr6 жыл бұрын
Is the 2016 ford fusion 2.0 turbo that difficult also?
@zREDDINGTONz6 жыл бұрын
Wait wait wait... I got lost at opening the hood.
@AlphaGh6 жыл бұрын
I got an atp catless downpipe coming friday and a mbrp catback coming tomorrow but no one shows an atp downpipe install besides that kid and I couldn't bare to watch it. Should I just do both installs together? I'm also ordering the symposer delete since the car will be loud enough now to not need that fake odd humm
@SouthAfrikaTrends6 жыл бұрын
Can i have an intercooler and a turbocharger for my fiesta st please please. If you have one. 🙏🏽
@JorJorBinks1236 жыл бұрын
Was that road at the end of the video Wilson Observatory road off Angeles crest?
Пікірлер
I have done this in a few hours and cut both heat shields to get them out. The cat was the worst part to get out what a stupid design. Cost me a few nerves and some cuts in my hands.
What happens now that I have rounded the 10mm bolt that connects the cat to the turbo?? Seriously yes..??
What’s plugged into the back of intake?
Great thing they cutted out how to remove the heatshields, looks like a tight as hell fit.
sounds good.
8:38 thats definitely not the cobb mount and is the efocus mount.
what about the heat shield? I mean won't the engine compartment get hotter with the headers showing?
Nice one man.
this video is good but also a bit frustrating because he rushes a lot of steps and should have slowed down a bit and elaborated
IS no one going to talk about the foam pads around the cowl vents? I live in Canada and would love to not have them fill with snow. NExt they will tell me there is a foam piece for the top of the rear hatch to keep snow out.
Omg hey! I think I saw one of these red fiestas for sale on CarGurus not long ago. Had low mileage and same paint with decals. I should've bought it 😔. It was going for 13k
Thank you for a great detailed video. This method works great for a 2013 Ford Focus Titanium as well!
I just did a whoosh catted downpipe. I didnt remove the manifold heat shield just the downpipe one. One bolt snapped but dont need to worry about that. Use pb blaster on everything and go slow everything else came off no problem. I also was able to snake the old dp out by just moving the exhaust off to the right then left after taking it out of the blue hanger. I had my resonator removed not sure if it makes a difference but i was worried id have to take the brace halfway down the car off to move the exhaust but no didnt need too
Will this fit on a 2018 focus st?
I don’t trust anyone with a sound symposer
lol. not much different from oem sound. yes I know the 4b11 sounds like that but a muffler can alter the sound and the tips look oem also. go a little more crazy. a 5 inch tips will fit and maybe give it a burnt tip. so boring cobb
You didn't reinstall the downpipe and header heatsheild?
Well I’ve been going for an hour and can’t get past step one. Rusty bolts :•(
Too many tubes to fail and leak
I love these install videos done by companies that are selling the products. Because if they weren't selling the product this video would literally be three days long, and demonitized due to foul language.
I am on day 4
la di da di da cobb on my knob
Now take your whole engine apart in your garage. Now install the down pipe
Why is my bolts 14mm ? The bolts connecting to the cat ? I'm confused... and it's only spinning not coming out
how well does this filter actually filter? I did notice more sound and as if the car breathed better but is it comparable in filtration to the oem?
How did you get the car on the stands
At the 0:34 mark it says "Safely Jack Up Your Fiesta" but the back end of the car is literally sitting on a stack of bricks. A fcukin stack of bricks. What the WHAT? In case it's not clear, that is not safe. Don't do that, folks.
lmfao noticed that too. They aren't even nicely placed just kinda there lol
"Because of the cat, you get zero flames" in other words. Why wouldnt you want flames??
FUMES
Hillbilly jackstands...
What is the part number/name of the piece of the side fender where you've placed the jacks? I need to buy a new one.
Aaah, just took me 3 years and 7 months but i did it you guys :) its very easy
Did you guys put all bolts back in the right places? This is crazy:)
EGG SAUCE
Thank you
Whoever made this video acts like everything is able to be hand loosened. Fuck you
I'm not mechanically incline but after watching your video, even I can do this. Thank you for your detailed video.
what's the foam for on the scuttle?
always disconnect your battery.. Wow great video showing safety.. SMH moron
why the fuck no one help explain how to take heatshield off , bunch of fuckk head ass niggas
The recip saw will work much more efficiently when the shoe is pressed up against the work being cut. If the saw and work are just bouncing around, nothing is being cut.
This is why all the exhaust shops near me are quoting me higher than usual prices.. my gti full intake install was $200 I was just quoted $320 to install the down pipe..after watching this video it seems like this is a pain in the ass
What a PITA install.
"Squeeze and it releases" *Same*
I cross threaded the bolt when securing the intake what is the piece called that the intake is secured to the bolt snapped
If I hear remove one more time.....
Is it that difficult to change the swaybar in a 2016 ford fusion 2.0 turbo?
Is the 2016 ford fusion 2.0 turbo that difficult also?
Wait wait wait... I got lost at opening the hood.
I got an atp catless downpipe coming friday and a mbrp catback coming tomorrow but no one shows an atp downpipe install besides that kid and I couldn't bare to watch it. Should I just do both installs together? I'm also ordering the symposer delete since the car will be loud enough now to not need that fake odd humm
Can i have an intercooler and a turbocharger for my fiesta st please please. If you have one. 🙏🏽
Was that road at the end of the video Wilson Observatory road off Angeles crest?
Sure looks like it.