This propeller from 32:31 what is it name and why you opt to use it instead of the regular edf?
@aviator2679 сағат бұрын
Great video and talent. Just a question.. the Tornado has air brakes - why aren’t they part of the model design?
@marcphilippveenendaal43945 сағат бұрын
There were a lot of moving details that were not in my final model. The bucket reverse thrust, leading edge slats and trailing flaps. Also opening and closing undercarriage doors. It was my first model so needed some room for future upgrades 😉
@aviator2674 сағат бұрын
@@marcphilippveenendaal4394 thanks for the reply. Agin what an amazing job and very inspiring. I love that you work in Solidworks. Thanks
@mayinjabob938010 сағат бұрын
thank you so much really love watching your videos. If i may, i suggest you watch Tom Stanton's Vtols and you will come to figure out a way to print the aircraft with just ribs instead of all that infill material. Also if You wish for the next project you could try a VTOL Flying Wing. Its quite challenging with the CG being far forwad, but its quite saticifying. Thank you.
@MiaKhalis11 сағат бұрын
thanks very good educational passionate content meanwhile i cannot still find passionate job for mee ...
@marcphilippveenendaal43944 сағат бұрын
Do something you love and are passionate about. Makes it a lot easier 😉
@rjung_ch11 сағат бұрын
Danke René 👍💪✌
@J-dk3bv11 сағат бұрын
I am already printing 😊
@marcphilippveenendaal43945 сағат бұрын
Awesome! Be sure to let us know how it goes 😉!
@BuceGar11 сағат бұрын
Impressive! 3D printers have made revisions and new iterations of aircraft much easier to redesign and test.
@marcphilippveenendaal43945 сағат бұрын
Absolutely! Amazing how technology has advanced so quickly!
@RoninnaterКүн бұрын
Waiting for VTOL
@alessandroazevedo2370Күн бұрын
Sukhoi SU-47 Berkut? VTOL????
@A-tech2 күн бұрын
did you need the extra 2 edf's on the wings? im thinking of making a smaller similar thing to this, thanks for the video
@renerosentraeger2 күн бұрын
They are 100% needed.
@KorayU.2 күн бұрын
Ses gerçek Harrier sesi gibi. İnanılmaz. 😅
@mtsAlencc2 күн бұрын
Why did you continue with the infill based solution instead of the engineered wing, if the latter has a higher strength to weight ratio?
@renerosentraeger2 күн бұрын
Especially when it comes to VTOL Technic inclusion you are too limited with the engineered style. Also inner ductings and smooth surfaces are not possible.
@Magizmo20073 күн бұрын
The link to the Jet doesn't seem to work
@renerosentraeger3 күн бұрын
Just checked.. It works aerojtp.com
@stephanephilippe3343 күн бұрын
hi ;i have buy JRM 01 ctol but i have not printer profil vor creality k1 ...have you please for me? lw pla printer profile creality slicer?
@renerosentraeger3 күн бұрын
Find it on the bottom of our downloadpage aerojtp.com/s/aero-jtp/:PDF_Downloads
@stephanephilippe3343 күн бұрын
@@renerosentraeger thank you but is it really just 2 wall line count for fuselage?
@stephanephilippe3343 күн бұрын
@@renerosentraeger in the construction instructions it is written 2.1.2 and 4 gyroid
@renerosentraeger3 күн бұрын
@@stephanephilippe334 yes, 2x bottom 1x wall 2x top layer correct.
@treerecords15514 күн бұрын
i think when it comes to lw pla we are really looking for heat resistance..
@luislopezcasado94354 күн бұрын
Impresionante, sin palabras, un buen trabajo.
@warmiceUT5 күн бұрын
I love this model, and interested to buy the 50mm EDF with landing version. However, from the set I saw only include Cura and Bambu Studio profile, I am having Creality K1 MAX printer, would you able to assist to provide this printer profile?
@renerosentraeger5 күн бұрын
I can provide the creality slicer settig files for the k1. They should work for the k1max as well.
@rogerpearce56505 күн бұрын
It was great to hear the skylarks in the background at your flying field. !! Congrats to the farmer.
@Breaking-things5 күн бұрын
What settings did you use to prevent stringing
@renerosentraeger5 күн бұрын
Max travel speed and combing mode for all.
@krisloaf54735 күн бұрын
Make a flying yf-21 Valkyrie from macross
@FarmerFpv5 күн бұрын
This would be incredible if it were scaled up to an 80mm or 90mm EDF. It flies really well. Seems to stall very predictably.
@renerosentraeger5 күн бұрын
No problem, you can scale it up with your slicer to every size you like.
@ebikefe6 күн бұрын
Hello - I noticed you shaved / filed the 64mm EDF motor ( to make it fit in the printed part?). Is there a specific 64mm brand you'd recommend (or I will have to shave it to fit as well)? Thanks.
@renerosentraeger6 күн бұрын
I got the best results with the QX Motor 64mm edf with 2200kv on 6s.
@ebikefe6 күн бұрын
@@renerosentraeger Thanks.
@ebikefe4 күн бұрын
@renerosentraeger Do I need a CC /CCW paired set of EDFs or it doesn't matter?
@Mindsetbeats6 күн бұрын
Beautiful project, René!! Truly, a masterpiece. Nice content, nice editing as always :D I have a question: Are you thinking of doing a F-22 model?? I would really love it! Thank you!
@renerosentraeger6 күн бұрын
Thx man! I'm a bit more into freestyle Jets, but never say never.
@Mindsetbeats6 күн бұрын
@@renerosentraeger Yeah! Right after this comment I saw the release video of the JRM-01. What an amazing Jet 👌
@MikeHunt-no2kt6 күн бұрын
Team America is here!
@marcphilippveenendaal43946 күн бұрын
That is a strange question 😂 it will be able to take off and land vertically! Now seriously, if you mean the differences in the build: there are fuselage changes behind the cockpit to allow for a ducted fan and yaw control vanes and also upgraded wings with inbuilt lift fans and fan covers. So some considerable design upgrade.
@luckynumbersevuuun7 күн бұрын
you can get rolls of the material they install car windshields with, and use that instead of the messy sealant for vacuum bagging. its called mastik. it can be reused. be sure to use 7mil plastic, as it has the elasticity and strength you need for the parts youre making. 9mil will distort your parts in the mould, 5mil will tear.
@l3ulo7 күн бұрын
Fc-31 + su-57?
@edutaimentcartoys7 күн бұрын
cool rc fighter jet ... amazing design
@marcphilippveenendaal43944 күн бұрын
Thanks! We love it!
@electricflyer817 күн бұрын
Thank you so much for releasing this awesome model to the public. I've been waiting ever since I saw it majestically flying through the skies.
@GROWBY827 күн бұрын
Hör bitte auf dir auf Englisch eins abzustammeln. Sollen die Eclipson-Fans doch den SubText lesen oder Deutsch lernen. Deine Videos sind gut aber das nervt.
@blattsalatrc9977 күн бұрын
Hallo René und Marc, ganz viel Erfolg mit dem Shop! Ich wünsche euch das die tolle Team-Leistung auch belohnt wird. Gruß Bernd
@renerosentraeger7 күн бұрын
Danke 😊🙌
@marcphilippveenendaal43946 күн бұрын
Danke Bernd!
@stephanephilippe3347 күн бұрын
I have purchase today! Thank you
@renerosentraeger7 күн бұрын
You're welcome!
@marcphilippveenendaal43946 күн бұрын
Thanks to you as well! Happy printing 😉
@user-ur2dq4kd9r7 күн бұрын
Хорошая модель, однако открыты вентиляторы двигателей в воздухозаборниках для засветки радиолокатором. Самолёт не может быть невидимкой по вышеуказанной причине, вентиляторы будут светиться. Кроме того , воздухозаборник не регулируемый, для радиоуправляемой модели сойдет, но не для реального самолёта, он будет сильно ограничен в динамических разгонных характеристиках. Слишком толстый профиль крыла указывает на то, что это игрушечная модель предназначена до дозвуковых полётов на очень низких скоростях.
@marcphilippveenendaal43946 күн бұрын
Your observations are spot on! It is not meant to be an actual jet design but a 3D printed radio control model that can be printed and built and reprinted if damaged 😉
@kronus81567 күн бұрын
was werden die unterschiede sein zum vtol jet ?
@brianwendel25287 күн бұрын
I enjoy rc plane designing and 3d printing my creations. I appreciate all the time put into these planes and testing you've done. Just ordered Jrm 30 pro. Will put my X1 Carbon to work. Thank you!! I have enjoyed all of your videos.
@renerosentraeger7 күн бұрын
You're welcome Brian!
@marcphilippveenendaal43946 күн бұрын
We look forward to seeing your progress and final results!
@kronus81567 күн бұрын
was wären so ungefähr die teilkosten ohne Drucker für den JRM-01 ctol 50mm edf
@renerosentraeger7 күн бұрын
Um die 140€
@yo_boi_john44717 күн бұрын
I'm from America so please forgive me, but what I think is the Austrian accent makes it slightly humorous. Awesome looking jet.
@renerosentraeger7 күн бұрын
Thx mate 🙌
@lukedavid80997 күн бұрын
Is there a detailed list of print settings included with the model? Your prints look great
@renerosentraeger7 күн бұрын
Yes, for Cura and Bambu Studio.
@BohuslavMedvec7 күн бұрын
Masterpiece of 3d print and engineering. Congratulations. I have a question, if I buy CTOL WPL top model, are stls for hand launch version included, or i must buy both ? I suppose there are some more differences - like covers if gear is not used.
@renerosentraeger7 күн бұрын
Yes, there are many differences so you should buy both.
@BohuslavMedvec7 күн бұрын
@@renerosentraeger You shoud create AllInOne Edition
@Mavy17047 күн бұрын
I got mine, too 🙌
@renerosentraeger7 күн бұрын
Great 🙌
@user-kc8nz4hu2t7 күн бұрын
何処で何を学んだらこのようなものを作れるのですか?
@renerosentraeger7 күн бұрын
Just stay interested.
@vmat3778 күн бұрын
Would love to see this with a delta wing.. like a Mirage
@renerosentraeger7 күн бұрын
Just disassemble the Elevators and you got it👌
@R.Ali.Y_61268 күн бұрын
Very Nice ....
@PopeyeFPV8 күн бұрын
This is pretty sweet! Now all I can request is a build video and demo of the full size jet with landing gear! Also, too bad my Prusa MK3 build volume is too small for the full size jet you offer. (250x 210x 210) I will have to upgrade so I can print this beauty. Anyhow, nice work!
@renerosentraeger8 күн бұрын
You find that footage in the JRM-01 tutorial playlist.
@PopeyeFPV8 күн бұрын
@@renerosentraeger 👍
@Monty_FPV8 күн бұрын
Waiting for the VTOL version!
@nicopatterson37218 күн бұрын
I love the video. Is it only me bt is there a high piched tone the background? It is so loud. I watched it on mute.
@catoworks8 күн бұрын
Great job, congratulations. Exactly how many minutes could you fly with the battery on the plane?
@SupernovaSpence8 күн бұрын
How is work on the slat scheduler going? Any updates on it?
@renerosentraeger8 күн бұрын
On the JRM-01 were no slats planned. What do you mean?
@SupernovaSpence3 күн бұрын
On a previous video we and actually talked a little about a scheduler that might be able to use a sensor and either obtain airspeed as a way to extend the slats or angle of attack. You could even compute angle off attack with an accelerometer and use that to extend slats by a certain percentage.
Пікірлер
Very nice
ขอบคุณมากครับกับสาระดี
Glad you liked it!
This propeller from 32:31 what is it name and why you opt to use it instead of the regular edf?
Great video and talent. Just a question.. the Tornado has air brakes - why aren’t they part of the model design?
There were a lot of moving details that were not in my final model. The bucket reverse thrust, leading edge slats and trailing flaps. Also opening and closing undercarriage doors. It was my first model so needed some room for future upgrades 😉
@@marcphilippveenendaal4394 thanks for the reply. Agin what an amazing job and very inspiring. I love that you work in Solidworks. Thanks
thank you so much really love watching your videos. If i may, i suggest you watch Tom Stanton's Vtols and you will come to figure out a way to print the aircraft with just ribs instead of all that infill material. Also if You wish for the next project you could try a VTOL Flying Wing. Its quite challenging with the CG being far forwad, but its quite saticifying. Thank you.
thanks very good educational passionate content meanwhile i cannot still find passionate job for mee ...
Do something you love and are passionate about. Makes it a lot easier 😉
Danke René 👍💪✌
I am already printing 😊
Awesome! Be sure to let us know how it goes 😉!
Impressive! 3D printers have made revisions and new iterations of aircraft much easier to redesign and test.
Absolutely! Amazing how technology has advanced so quickly!
Waiting for VTOL
Sukhoi SU-47 Berkut? VTOL????
did you need the extra 2 edf's on the wings? im thinking of making a smaller similar thing to this, thanks for the video
They are 100% needed.
Ses gerçek Harrier sesi gibi. İnanılmaz. 😅
Why did you continue with the infill based solution instead of the engineered wing, if the latter has a higher strength to weight ratio?
Especially when it comes to VTOL Technic inclusion you are too limited with the engineered style. Also inner ductings and smooth surfaces are not possible.
The link to the Jet doesn't seem to work
Just checked.. It works aerojtp.com
hi ;i have buy JRM 01 ctol but i have not printer profil vor creality k1 ...have you please for me? lw pla printer profile creality slicer?
Find it on the bottom of our downloadpage aerojtp.com/s/aero-jtp/:PDF_Downloads
@@renerosentraeger thank you but is it really just 2 wall line count for fuselage?
@@renerosentraeger in the construction instructions it is written 2.1.2 and 4 gyroid
@@stephanephilippe334 yes, 2x bottom 1x wall 2x top layer correct.
i think when it comes to lw pla we are really looking for heat resistance..
Impresionante, sin palabras, un buen trabajo.
I love this model, and interested to buy the 50mm EDF with landing version. However, from the set I saw only include Cura and Bambu Studio profile, I am having Creality K1 MAX printer, would you able to assist to provide this printer profile?
I can provide the creality slicer settig files for the k1. They should work for the k1max as well.
It was great to hear the skylarks in the background at your flying field. !! Congrats to the farmer.
What settings did you use to prevent stringing
Max travel speed and combing mode for all.
Make a flying yf-21 Valkyrie from macross
This would be incredible if it were scaled up to an 80mm or 90mm EDF. It flies really well. Seems to stall very predictably.
No problem, you can scale it up with your slicer to every size you like.
Hello - I noticed you shaved / filed the 64mm EDF motor ( to make it fit in the printed part?). Is there a specific 64mm brand you'd recommend (or I will have to shave it to fit as well)? Thanks.
I got the best results with the QX Motor 64mm edf with 2200kv on 6s.
@@renerosentraeger Thanks.
@renerosentraeger Do I need a CC /CCW paired set of EDFs or it doesn't matter?
Beautiful project, René!! Truly, a masterpiece. Nice content, nice editing as always :D I have a question: Are you thinking of doing a F-22 model?? I would really love it! Thank you!
Thx man! I'm a bit more into freestyle Jets, but never say never.
@@renerosentraeger Yeah! Right after this comment I saw the release video of the JRM-01. What an amazing Jet 👌
Team America is here!
That is a strange question 😂 it will be able to take off and land vertically! Now seriously, if you mean the differences in the build: there are fuselage changes behind the cockpit to allow for a ducted fan and yaw control vanes and also upgraded wings with inbuilt lift fans and fan covers. So some considerable design upgrade.
you can get rolls of the material they install car windshields with, and use that instead of the messy sealant for vacuum bagging. its called mastik. it can be reused. be sure to use 7mil plastic, as it has the elasticity and strength you need for the parts youre making. 9mil will distort your parts in the mould, 5mil will tear.
Fc-31 + su-57?
cool rc fighter jet ... amazing design
Thanks! We love it!
Thank you so much for releasing this awesome model to the public. I've been waiting ever since I saw it majestically flying through the skies.
Hör bitte auf dir auf Englisch eins abzustammeln. Sollen die Eclipson-Fans doch den SubText lesen oder Deutsch lernen. Deine Videos sind gut aber das nervt.
Hallo René und Marc, ganz viel Erfolg mit dem Shop! Ich wünsche euch das die tolle Team-Leistung auch belohnt wird. Gruß Bernd
Danke 😊🙌
Danke Bernd!
I have purchase today! Thank you
You're welcome!
Thanks to you as well! Happy printing 😉
Хорошая модель, однако открыты вентиляторы двигателей в воздухозаборниках для засветки радиолокатором. Самолёт не может быть невидимкой по вышеуказанной причине, вентиляторы будут светиться. Кроме того , воздухозаборник не регулируемый, для радиоуправляемой модели сойдет, но не для реального самолёта, он будет сильно ограничен в динамических разгонных характеристиках. Слишком толстый профиль крыла указывает на то, что это игрушечная модель предназначена до дозвуковых полётов на очень низких скоростях.
Your observations are spot on! It is not meant to be an actual jet design but a 3D printed radio control model that can be printed and built and reprinted if damaged 😉
was werden die unterschiede sein zum vtol jet ?
I enjoy rc plane designing and 3d printing my creations. I appreciate all the time put into these planes and testing you've done. Just ordered Jrm 30 pro. Will put my X1 Carbon to work. Thank you!! I have enjoyed all of your videos.
You're welcome Brian!
We look forward to seeing your progress and final results!
was wären so ungefähr die teilkosten ohne Drucker für den JRM-01 ctol 50mm edf
Um die 140€
I'm from America so please forgive me, but what I think is the Austrian accent makes it slightly humorous. Awesome looking jet.
Thx mate 🙌
Is there a detailed list of print settings included with the model? Your prints look great
Yes, for Cura and Bambu Studio.
Masterpiece of 3d print and engineering. Congratulations. I have a question, if I buy CTOL WPL top model, are stls for hand launch version included, or i must buy both ? I suppose there are some more differences - like covers if gear is not used.
Yes, there are many differences so you should buy both.
@@renerosentraeger You shoud create AllInOne Edition
I got mine, too 🙌
Great 🙌
何処で何を学んだらこのようなものを作れるのですか?
Just stay interested.
Would love to see this with a delta wing.. like a Mirage
Just disassemble the Elevators and you got it👌
Very Nice ....
This is pretty sweet! Now all I can request is a build video and demo of the full size jet with landing gear! Also, too bad my Prusa MK3 build volume is too small for the full size jet you offer. (250x 210x 210) I will have to upgrade so I can print this beauty. Anyhow, nice work!
You find that footage in the JRM-01 tutorial playlist.
@@renerosentraeger 👍
Waiting for the VTOL version!
I love the video. Is it only me bt is there a high piched tone the background? It is so loud. I watched it on mute.
Great job, congratulations. Exactly how many minutes could you fly with the battery on the plane?
How is work on the slat scheduler going? Any updates on it?
On the JRM-01 were no slats planned. What do you mean?
On a previous video we and actually talked a little about a scheduler that might be able to use a sensor and either obtain airspeed as a way to extend the slats or angle of attack. You could even compute angle off attack with an accelerometer and use that to extend slats by a certain percentage.