Printing and Flying the JRM-01 Junior Mini RC Fighter Jet
Ғылым және технология
Get the STLs on our new website:
aerojtp.com
Get your Bambulab 3D-Printer and Material here:
shrsl.com/29j33-2yn7-1cwx9
*Affiliate Link
#bambulab
If you wanna support this project, you can become my Patreon:
/ rene_rosentraeger
Or buy me a coffee :)
www.buymeacoffee.com/ReneRc
Support me on Paypal:
paypal.me/rrosentraeger
Пікірлер: 94
STLs on: aerojtp.com
Amazing!! When will the STL be available, I am so excited to print this masterpiece
@renerosentraeger
Ай бұрын
Very soon, Marc and I work hard on it💪
@camk2552
29 күн бұрын
@@renerosentraeger Yes please nice work!!! Cant wait to fly
I'm new to 3D printing but the level of design detail going into your models and seeing how much of it is printed makes me want to get into it even more! Looking forward to when the model for the Junior releases, it's so awesome
I have a smaller one using 2x 25mm edf’s on 350mha 3s - it’s a military jet but not a fighter strictly so I guess you’re right. Love your work
I got mine, too 🙌
@renerosentraeger
5 күн бұрын
Great 🙌
Very nice build and a great maiden flight! ☀️✨✈️
@renerosentraeger
21 күн бұрын
Thx🙌
am so excited to print this, waiting for the stl
@renerosentraeger
5 күн бұрын
STLs on aerojtp.com
Bei dir startet aber wirklich alles senkrecht 😆😆👍👍👍👍 sehr cooles Teil
@renerosentraeger
17 күн бұрын
Danke dir 😅
sehr schön! :)
I redesigned my a10 warthog for single a 50mm edf and used 3s to save weight the thrust is technically abit more aswell the twin esc, motors, housings and extra wiring plus the extra battery cell really do add up now i have a futuristic a10 warthog with twin inlet ducts to a single 50mm edf hidden inside its printed with LW pla and uses the big chinese foam glider wings
I had no idea 30mm EDFs for RC even exist ;D Nice vertical "take-off"! :D
@renerosentraeger
29 күн бұрын
Haha, thanks 😁🤙
Small is beautiful
Mr. Rosentraeger, what are you thoughts on the nature of aerodynamics on EDF and scale effect jets? Typically swept wings find advantage at high forward speeds and high renold’s numbers, but most RC planes don’t arrive at those values. Are there certain disadvantages accepted for designs emulating jets?
@renerosentraeger
Ай бұрын
For small scale Jets, a low wingload is everything in terms of nice handling. For reaching high airspeed ... Power power...
Tja ich glaub das wird mein erster edf. Sehr schönes Flugbild Respekt.
@renerosentraeger
26 күн бұрын
Hört sich gut an!
This is amazing. Since the world is getting so strict on size, I'd love to see mini versions of some of your other planes. I've shrunk down someone's f22 model to hit the sub 250g limit with just one qx 30mm and it flew well. Some videos on my channel
@timapologun6995
Ай бұрын
I just had a look at your videos, so cool! What STLs did you use to create the f22 and did you use standard PLA?
@renerosentraeger
29 күн бұрын
Looking good!
Great!
Welcome to Airbus designing team 🤝
@chronicandironic8701
23 күн бұрын
if it was boeing they’d be killed 🤣
NIce! I'm working on a 30mm J-10 I'm still shopping for a canard delta mix capable gyro for anyone know what he's using in the video? I have an extra AR631 but no clue how to get delta configured for AS3X where the one he is using looks like just dip switches...
Pick your favorite 3D-printers, preferably fastest, which ones will it be?
@renerosentraeger
21 күн бұрын
Bambu x1c
Cool that you go the "small way" because I would never do big 3D planes, just because of lacking room in the first place...
Great
where will you post the stl i have also looked at some more of your work and I find it extremely interesting you just earned a sub!
@renerosentraeger
29 күн бұрын
A new website is in the making. More infos soon.
👍👍👍😎 Now this this mini me is totally cool!! Nice work Rene' Edit: who makes the EDF units??
@renerosentraeger
29 күн бұрын
Look For QX Motor EDFs
👍
What battery size fits in there? Anyway nice project!
@renerosentraeger
26 күн бұрын
Thx! 4s 800-1000mAh
is it still all LW-PLA? If so, where do you get the different colors?
@renerosentraeger
Ай бұрын
From 3dLabprint and colorfabb.
Bro how you get such mat finishing can you share your settings for bed slinger printers
@renerosentraeger
Ай бұрын
Find the print profiles on my Patreon site.
Germanic people made this world is what I usually say to people! 👍
Hello, could you tell us where to get the stls please? thank you
@renerosentraeger
21 күн бұрын
Soon
Great design😊In your opinion from the printers taken to do this plane, what is the printer with best quality printing?! thanks 😉
@renerosentraeger
29 күн бұрын
It's the Bambulab xc1.
@Kramskybmw
29 күн бұрын
@@renerosentraeger ok..i mean the second one 😂
@renerosentraeger
27 күн бұрын
Creality K1C
How about differential thrust for yaw?
@renerosentraeger
Ай бұрын
Or micro vector nozzles 😁🤙
@technicbuilder6410
Ай бұрын
@@renerosentraeger yea, but my point was to only change "software" (if that's how you call it) and not construction of the plane.
Where do you buy the LW PLA in those colours?
@renerosentraeger
29 күн бұрын
3dLabprint and colorfabb
@olliehanimation
29 күн бұрын
@@renerosentraeger yes but not in those nice orange and teal colours? Can you send a store link pls 🙏
Very nice, STL available?
@renerosentraeger
Ай бұрын
Very soon
im new to rc planes i just bought my self a 3d printer would it fly normaly?
@renerosentraeger
20 күн бұрын
Yes, super easy to fly.
Hi, gibt ein irgendeine Möglichkeit den Kleinen auch zu Drucken? Evlt. die Datein zu kaufen?
@renerosentraeger
23 күн бұрын
Ja Ende Mai.
@EscapeThaSchool
23 күн бұрын
@@renerosentraeger Okay nice. Werden die dann frei zur Verfügung stehen?
i’d pay good money to get those STLs
@renerosentraeger
5 күн бұрын
Aerojtp.com
Kann man auch den su 47 in so klein machen?
@renerosentraeger
19 күн бұрын
Klar!
Very Good job my dear , kindly upload stl files , im very excited to print and fly
@renerosentraeger
25 күн бұрын
Release is end of the month.
👍💪✌
Can we not buy the files for these planes or there not ready yet?
@edgardesy3371
25 күн бұрын
Not ready
@quadpop4643
25 күн бұрын
@@edgardesy3371 thank you
@renerosentraeger
5 күн бұрын
STLs on aerojtp.com
@quadpop4643
5 күн бұрын
@@renerosentraeger awesome thank you again!
OMG, the damn bugs you hear on the vid had me swiping my hand past my ear. With ear buds in it sounds like a bug really flying past your ear.
Make a flying yf-21 Valkyrie from macross
Awsome work 👏 but I need a sub 250g 🙏
@renerosentraeger
Ай бұрын
No problem, coming next🛩️
@richardspicer8253
29 күн бұрын
@@renerosentraeger you're a star 👏👏👌
@Dartheomus
22 күн бұрын
@@renerosentraeger Really?! That's pretty impressive. Unlike drones, I feel like a sub 250 plane would need to be flown indoors. It seems like the wind would blow it all over the place.
What makes you think it's the smallest in the world? 😂
STL please😌👍🍺
@renerosentraeger
5 күн бұрын
Aerojtp.com
don't remove strings with a knife remove them by reducing flow and correcting retract distance in slicer i will also suggest running stringing tests with for each type of filament before printing major parts
@ttpechon2535
29 күн бұрын
He has said many, many times, that retract does not work with these filaments, I think he has a video on it.
@Terry_Fritz
29 күн бұрын
Rene addressed this problem in a previous video. He said LWPLA doesn't retract very well so ignoring the setting and trimming with a knife was far easier.
@solderingiron9405
29 күн бұрын
@@ttpechon2535 I'm first time in this channel so i didn't know that
@MTBCrafter
29 күн бұрын
@@solderingiron9405the problem with LW-PLA is that it's creating a foam. The hotter you print the more it expands. That's why you can't retract it that good. Even if you stop extruding the filament proceeds foaming. The only way to prevent it is the vase mode, due to the continuous flow. But it's not that easy to design those parts (and it's very time consuming).
@solderingiron9405
29 күн бұрын
@@MTBCrafter i actually never heard of that material. i will make a little bit research