Just curious is your robot still running? I’m thinking about getting this one.
@tylerpratt25113 күн бұрын
Ih took it off no water came out and my ac doesn't even work so any suggestions
@StayPositive-sd8op3 күн бұрын
I still have the regular light bulbs that came with my 04 Envoy and it seems like I've had problems with the inside lights not coming on so I changed all the bulbs out and they worked for about a week and then when I would open the door as time goes on they would stop. Then id get them to turn on about once a month. It'll go on for about 5 times, starting the truck, then the lights go back off
@travissapp22353 күн бұрын
Are you laying on a Gateway computer box?
@KevinNadeau3 күн бұрын
@@travissapp2235 😀 Keen observation…yes it was a Gateway computer box 👍
@robertguthrie41134 күн бұрын
Why are you running the wrong weight it calls for 5w30 not 10w40
@KevinNadeau4 күн бұрын
@@robertguthrie4113 Because I have almost 350k miles and I believe a little thicker oil is fine.
@stevenjack233316 күн бұрын
I use both on my 2015 Silverado 5.3 and I don't see any difference.
@556nate76 күн бұрын
Gotta 2004 Cadillac CTS 3.6l gonna get into for the 3rd time but most definitely recommend this video an part 2
@CutThroat_Kid7 күн бұрын
My new seal measured a mm larger diameter than the one i pulled pulled out. And dang, i beat the hell out of the outter edge of the new seal during the install. Now im considering grabbing another and giving it another go before i put it back together. Definitely need a better punch to install it too. Did your new seal seem super tight and tough to hammer in? I had a real hard time pushing in the upper edge with the oil pan in the way.
@KevinNadeau7 күн бұрын
@@CutThroat_Kid I don’t remember mine being that tough to install
@rdkenn64957 күн бұрын
I used the mobil 1 in a pinch, and it worked fine. Still use the acdelco on my 03 though.
@Amanda-bt4vy7 күн бұрын
This video is more useful than the directions that come with the ignition switch.... Tried for an hour with what the instructions said (which was to also remove the cylinder lock) after it not working I found and watched this video, did exactly what he did and boom it started first try 😅
@KevinNadeau7 күн бұрын
@@Amanda-bt4vy 👍
@c5kev7 күн бұрын
FYI to folks - the LA series tractors sold at home stores (Lowes, etc.) or NOT made by John Deere (so you won't find them at the Deere website). I believe they're made by a company called MTD that makes 'private label', budget mowers for Deere, (Sears) Craftsman and others. I've seen the larger 'garden' tractors at Lowes that are in the neighborhood of around $2500. By contrast, my Deere 22HP X320 cost me $3500-$3800 (don't remember exactly) - 16 years ago. The hinge setup is completely different than what's shown here. Not knocking the video here, but look elsewhere for real Deere tractor hood hinges. Hope this might help someone.
@KevinNadeau7 күн бұрын
Thank you for the comments. I will point out that the mower in this video was not bought from a big box store.
@c5kev6 күн бұрын
@@KevinNadeau Please, don't misunderstand. I wasn't trying to insult your machine in any way. My only point was to let people know that some 'Deere's' aren't 'real' Deere's (and not just the LA series BTW) ...they might not know that. I know I didn't before I bought mine. If you felt insulted, my apologies.
@KevinNadeau6 күн бұрын
@@c5kev I wasn’t insulted at all 😀 Just wanted to clarify the tractor we have 👍
@michaelrobison7037 күн бұрын
I don't know what's wrong with the trigger you know with every time it goes tonight mode it just it doesn't trigger so I'm going to need you to go up there about I think I can power down at like 1:30 a.m. and hopefully got to get it up and running by 5:00 oh yeah there's no elevator
@joachimsaul43458 күн бұрын
Herrlich ❤
@real82it8 күн бұрын
Thanks. Helpful. One note - our dealer warned us to use a synthetic blend rather than full synthetic- they said they observed some turbo blow by on these models with full synthetic.
@thomasmiller36658 күн бұрын
I have the same problem I changed the oil pressure sensor n I still have the same problem
@williskeith58738 күн бұрын
Unless you have 20 inch forearms, there's no need to take the wheel off.
@thundherr9 күн бұрын
I would buy one today if ford sold it new on the lot with cold a/c. Such a beautiful vehicle
@383ci519 күн бұрын
Magnifique La couleur lui va super bien Merci
@warrenzevonsangryghost60559 күн бұрын
fiberglass repo. Still cool.
@user-ut9gr9mn2i9 күн бұрын
Cool super Bird and cool song🤞✌️👉👍🤟😎🇺🇸
@patrickfannin27719 күн бұрын
Very beautiful
@KevinNadeau9 күн бұрын
@@patrickfannin2771 👍
@corbetcochran57009 күн бұрын
Who's car was it?
@KevinNadeau9 күн бұрын
@@corbetcochran5700 not sure, I didn’t get to talk with the owner.
@corbetcochran57008 күн бұрын
@@KevinNadeau dang!
@Thekid-eg1rv10 күн бұрын
absolutely no help at all thanks so much 👍🏽
@Thekid-eg1rv10 күн бұрын
thanks for showing how to take it out
@jayvian32710 күн бұрын
Wow I hope mine last that long especially that I stay prompt with the maintenance intervals. Thank you for sharing nothing but continued good fortune
@THOMASMORIN-ys9ke10 күн бұрын
Holy Grail ❤
@Mr_Pigy10 күн бұрын
Andddd the Prius passed it
@KevinNadeau10 күн бұрын
@@Mr_Pigy 😂
@agentsjk963211 күн бұрын
I'll definitely take one of those over any modern stock car.
@michaelkalenda171311 күн бұрын
3 years later still a great video just followed it step by step and they sound great thanks
@KevinNadeau11 күн бұрын
@@michaelkalenda1713 thank you! 👍
@zellalynch343611 күн бұрын
Are u in la.cs
@KevinNadeau11 күн бұрын
@@zellalynch3436 No
@davidhoward725012 күн бұрын
Where can I get that same manual please.
@KevinNadeau12 күн бұрын
@@davidhoward7250 Shoot me an email
@rhythm44912 күн бұрын
HAY,, Dude you can't FOOL US,, We know your kid is walking you through this...LOL..GREAT VIDEO
@KevinNadeau12 күн бұрын
@@rhythm449 😂 Yup, he taught me everything I know 👍
@nickschwab556612 күн бұрын
Just now seeing this video, Studtacular78 was right. No need to remove fuel line to take the alternator bolts out if u are just changing it. If removing motor then ok, but not for alt swap
@kirk408613 күн бұрын
You running 5's or 6 seconds?
@KevinNadeau13 күн бұрын
I wish this was my car :)
@kirk408613 күн бұрын
@@KevinNadeau ooohhh...so you just video it...
@KevinNadeau13 күн бұрын
@@kirk4086 Yes, it was at a car show I attended
@kirk408612 күн бұрын
@@KevinNadeau lucky! Thanks again!
@D-DAY461413 күн бұрын
🤘🏻
@rolloutcarlo13 күн бұрын
Until it smokes..breaks..drove a GBody Monte for 27yrs..of course I’m driving that
@sambeamer685113 күн бұрын
Looks like money not well spent
@SCadiman13 күн бұрын
Straight and Hard!!😜
@SDCornelli13 күн бұрын
Nope .. I'd fly it though 😅
@Cages_Domain13 күн бұрын
Hell to the YES!!!
@andreayotte339613 күн бұрын
Deadly
@JasonMannett13 күн бұрын
Ah....yeah❤❤❤
@Coda676614 күн бұрын
I would be the happiest man on earth if I could drive it just 1/4 of a mile.
@dannydionne762014 күн бұрын
💯💯 CHEVY 💯💯💪💪💪💪💪💪
@KevinNadeau14 күн бұрын
👍
@user-wo7dg2dt7h14 күн бұрын
Street mode!!!!❤
@kennethfeltman769314 күн бұрын
Absolutely beautiful.. enjoy it!
@mattmadden396314 күн бұрын
I would never ever drive this car. Not in a million years. It's wayy too nice for me I'd smudge the paint and go bankrupt
@hardheadjames362414 күн бұрын
Yep yep, I believe that I'd drive it every day.
@matthewobrien422514 күн бұрын
Had the same issue as yours but i replaced that same part and still nothing.
@KevinNadeau14 күн бұрын
@@matthewobrien4225 Were you able to figure out the issue? Bad ground? Bad safety switch?
Пікірлер
Just curious is your robot still running? I’m thinking about getting this one.
Ih took it off no water came out and my ac doesn't even work so any suggestions
I still have the regular light bulbs that came with my 04 Envoy and it seems like I've had problems with the inside lights not coming on so I changed all the bulbs out and they worked for about a week and then when I would open the door as time goes on they would stop. Then id get them to turn on about once a month. It'll go on for about 5 times, starting the truck, then the lights go back off
Are you laying on a Gateway computer box?
@@travissapp2235 😀 Keen observation…yes it was a Gateway computer box 👍
Why are you running the wrong weight it calls for 5w30 not 10w40
@@robertguthrie4113 Because I have almost 350k miles and I believe a little thicker oil is fine.
I use both on my 2015 Silverado 5.3 and I don't see any difference.
Gotta 2004 Cadillac CTS 3.6l gonna get into for the 3rd time but most definitely recommend this video an part 2
My new seal measured a mm larger diameter than the one i pulled pulled out. And dang, i beat the hell out of the outter edge of the new seal during the install. Now im considering grabbing another and giving it another go before i put it back together. Definitely need a better punch to install it too. Did your new seal seem super tight and tough to hammer in? I had a real hard time pushing in the upper edge with the oil pan in the way.
@@CutThroat_Kid I don’t remember mine being that tough to install
I used the mobil 1 in a pinch, and it worked fine. Still use the acdelco on my 03 though.
This video is more useful than the directions that come with the ignition switch.... Tried for an hour with what the instructions said (which was to also remove the cylinder lock) after it not working I found and watched this video, did exactly what he did and boom it started first try 😅
@@Amanda-bt4vy 👍
FYI to folks - the LA series tractors sold at home stores (Lowes, etc.) or NOT made by John Deere (so you won't find them at the Deere website). I believe they're made by a company called MTD that makes 'private label', budget mowers for Deere, (Sears) Craftsman and others. I've seen the larger 'garden' tractors at Lowes that are in the neighborhood of around $2500. By contrast, my Deere 22HP X320 cost me $3500-$3800 (don't remember exactly) - 16 years ago. The hinge setup is completely different than what's shown here. Not knocking the video here, but look elsewhere for real Deere tractor hood hinges. Hope this might help someone.
Thank you for the comments. I will point out that the mower in this video was not bought from a big box store.
@@KevinNadeau Please, don't misunderstand. I wasn't trying to insult your machine in any way. My only point was to let people know that some 'Deere's' aren't 'real' Deere's (and not just the LA series BTW) ...they might not know that. I know I didn't before I bought mine. If you felt insulted, my apologies.
@@c5kev I wasn’t insulted at all 😀 Just wanted to clarify the tractor we have 👍
I don't know what's wrong with the trigger you know with every time it goes tonight mode it just it doesn't trigger so I'm going to need you to go up there about I think I can power down at like 1:30 a.m. and hopefully got to get it up and running by 5:00 oh yeah there's no elevator
Herrlich ❤
Thanks. Helpful. One note - our dealer warned us to use a synthetic blend rather than full synthetic- they said they observed some turbo blow by on these models with full synthetic.
I have the same problem I changed the oil pressure sensor n I still have the same problem
Unless you have 20 inch forearms, there's no need to take the wheel off.
I would buy one today if ford sold it new on the lot with cold a/c. Such a beautiful vehicle
Magnifique La couleur lui va super bien Merci
fiberglass repo. Still cool.
Cool super Bird and cool song🤞✌️👉👍🤟😎🇺🇸
Very beautiful
@@patrickfannin2771 👍
Who's car was it?
@@corbetcochran5700 not sure, I didn’t get to talk with the owner.
@@KevinNadeau dang!
absolutely no help at all thanks so much 👍🏽
thanks for showing how to take it out
Wow I hope mine last that long especially that I stay prompt with the maintenance intervals. Thank you for sharing nothing but continued good fortune
Holy Grail ❤
Andddd the Prius passed it
@@Mr_Pigy 😂
I'll definitely take one of those over any modern stock car.
3 years later still a great video just followed it step by step and they sound great thanks
@@michaelkalenda1713 thank you! 👍
Are u in la.cs
@@zellalynch3436 No
Where can I get that same manual please.
@@davidhoward7250 Shoot me an email
HAY,, Dude you can't FOOL US,, We know your kid is walking you through this...LOL..GREAT VIDEO
@@rhythm449 😂 Yup, he taught me everything I know 👍
Just now seeing this video, Studtacular78 was right. No need to remove fuel line to take the alternator bolts out if u are just changing it. If removing motor then ok, but not for alt swap
You running 5's or 6 seconds?
I wish this was my car :)
@@KevinNadeau ooohhh...so you just video it...
@@kirk4086 Yes, it was at a car show I attended
@@KevinNadeau lucky! Thanks again!
🤘🏻
Until it smokes..breaks..drove a GBody Monte for 27yrs..of course I’m driving that
Looks like money not well spent
Straight and Hard!!😜
Nope .. I'd fly it though 😅
Hell to the YES!!!
Deadly
Ah....yeah❤❤❤
I would be the happiest man on earth if I could drive it just 1/4 of a mile.
💯💯 CHEVY 💯💯💪💪💪💪💪💪
👍
Street mode!!!!❤
Absolutely beautiful.. enjoy it!
I would never ever drive this car. Not in a million years. It's wayy too nice for me I'd smudge the paint and go bankrupt
Yep yep, I believe that I'd drive it every day.
Had the same issue as yours but i replaced that same part and still nothing.
@@matthewobrien4225 Were you able to figure out the issue? Bad ground? Bad safety switch?
Such a nice looking car even today.