Welcome to Doctor JPTV!
I am John Paul Tosoc, a Doctor of Philosophy in Biology. This KZread channel serves as my platform to share a part of my life with you all. I will be posting videos about science, research, travel, and lifestyle. Hope you will support me on this. Thank you! Enjoy!
----------------------------------------------------------------------------------------------------------------------------------------------------
FAQ:
What editing software do you use? Final Cut Pro and Motion
What camera do you use? Canon M50 and or iPhone X
For more details, please refer below.
Пікірлер
I have a question, the powder that i have used for the maceration can i still reuse it? After filtering my solution, there was still leftover solute. After some time, it became dry again. And so i was hoping if i could use it again to make another batch of the maceration process. My plant material is very limited, you see. I used methanol as my solvent btw
You can but the amount of bioactive compounds might be lesser than the first batch.
Thank you brotherJohn Paul
🥳 grabe ba 😁
Thanks doc. What's the ratio of the extract to solvent?
paano buksan yung egg sir para maka pic for angiosys
Wow! Galing mo po talaga sir!
How to extract Bisphenol A (phytoremediated) from plants... Plz help
Hello po! Just a question, kung 7.5mL po ‘yung solution nila (filtered macerated leaves) mga ilang mL po kaya ‘yung magiging final product (extract itself)? Thank you po!
How'd you identify what ratio of solute:solvent to use?
what is maceration and dissociation?
If trying to extract Alcaloids say plant has 4 different all have nitrogen but only 1 has an OH group how can a person separate the Alcaloids from each other
2:43 please.. have a question.. what type of solvent you have used for maceration ? I have another question : for ex if we use ethanol-water as solvent, after the extraction we eleminate the ethanol first using ratary-evaporator,but how we eliminate water fraction ? Thanks brother for sharing this video !!
Hi. What HPLC machine will be good enough to read Thc content pritty exakt?
Hello! Thank you for this informative video. I have 2 questions to which I hope to have an answer to, it would be very much appreciated. 1- In our lab, we don't have a freeze dryer (lyophilisateur), and in a lot of references, i read that they used a drying oven at 40°C for 48h to evaporate to water in the extract. It is okay? Will it not affect my results too much? 2- For your alcohol extract, after using the rotavapor, the extract was liquid meaning there was still a little bit of solvent in it no? if i'm right, how will you then calculate the concentration if you don't know the initial concentration of your extract? Thank you!
1. Yes, you can do that. 2. Yea, there will be some alcohol left. But you need to further evaporate this in a fumehood for a couple of days. Concentration of what? For what? It is automatic that the concentration of the extract you have collected is 100% pure crude extract. If you want to use it as a treatment for testing, then compute the specific concentration you need for the testing using weight of the extract/volume of solvent.
hi can u send me your basis? might as well use it in my reswarch thank u
pwede po list ninyo mga needed materials? huhuhu need po kasi namin for our research
We have the internet for a reason. Nakapag-youtube kayo, for sure kaya nyo rin mag-google. Please read RRLs. Thank you
How long does it take po bago ma evaporate lahat ng solvents? Like how many hours po
Hello po! Thank you po for the informative video! It really helped us understand the methodology needed to conduct our research. May we ask po how much plant material (in grams) do we need to use to extract 5mg, 16.25mg, 35mg of the pure extract? And also how much solvent is required for maceration? We are currently struggling to compute the amount of grams of plant material to get the according milligrams (We tried using the vague references in the video but still struggled). Also po we need to compute the amount of solvent used for maceration and the ratio is 1:2 (w/v). The volume of our final solution is 50ml and we need to dilute it for 3 concentrations (10%, 32.5%, 70%). After solving this, the grams needed for the dilution is already stated above (5mg, 16.25mg, 35mg). To conclude, our group wants to know how much grams of plant material is needed for the final product using the 1:2 ratio for maceration and how much solvent is required. **We know that this request is a bit hard, if it cannot be answered, do you have any suggestions po on how we can compute it?** Thanks po doc!!
ano pong positive control for cam assay?
You can use methotrexate
@@DoctorJPTV it needs prescription daw po
@@DoctorJPTV quercetin or retinoic acid po ang common na ginagamit based on my research. we are g12 students po kasi and we are doing resesrch
@@LVCAS_MAGNVS then use retinoic acid or quercetin if you want. They may have antiangiogenic properties but these are not drugs used for angiogenesis or cancer.
Awesome video shall I know the best method for extracting Ginseng herb? can we use the same method? please advise and thanking in advance
It really depends on your target bioactive compounds present in Ginseng herb.
Hi . Can you tell me the equipments name ?
May I ask paano po ma displace yung aircell? Need po ba talaga yan to create a window? Or pwede po kahit dun na sa original spot?
Nasa video kung pano magdisplace ng aircell. Yes need gumawa ng window. Pwede naman original spot but might affect the result of your experiment.
@@DoctorJPTV huhu hi po ulit, kapag maglalagay na po ba ng extract need po ba iinject sa egg if oo sa may yolk po ba or idrop lang yung extract? And do we have to remove/peel ung sac after maalis ung shell?
We did this po and nagkamolds ang mabaho po yung eggs tapos nawala rin po yung ugat? Ano po yung possible na mali namin, and naka DIY incubator po kami
We're conducting a study po na similar sa angiogenesis, mag tuturok kami ng extract and to see if liliit/hinder ung growth ng veins and need po bilangin.
Contaminated incubator, not properly cleaned, not properly closed, not airtight door, etc. Better clean your incubator first before using. Maintain 37C temperature and 55% relative humidity.
@@DoctorJPTV we injected an extract and naka molds po, possible po ba na sa extract yun or sa incubator po mismo?
@@duzonaleeahalessandrag.934 incubator or you didn’t clean your eggs properly
@@DoctorJPTV actually our eggs has dirt po, pero sabi wag daw huhugasan, how do we clean it po ba without damaging the egg?
The 2nd method i plan on doing a Mitragynine extraction
Hello po. Did you used ethanol for your extract or distilled water lang po? How many days did it took for you to get the crude extract po? And, do you have any knowledge about how to make the extraction of crude extract from an aqueous solution to become faster? Thank you so much!
In this experiment (nasa video), I used various extraction solvent. Crude extract ang tawag sa makukuha mong extract after the extraction. Kung ang gamit mo is ethanol, you’ll call it ethanolic crude extract. If water, you’ll call it aqueous crude extract. Maceration takes 3-7 days, depending on your research design. The actual extraction for ethanolic extract takes less than an hour. For aqueous extract, you only need to boil them. Filter. Collect the supernatant and freeze it. Once frozen, load it in a freeze dryer. It will take 1-2 days or less depending on your extract.
Hello po. We are currently conducting a CAM Assay about a plant's anti-angiogenic effect and all of our eggs died po. How can we make them survive for at least a day para lang maobserve namin yung blood vessels nila and macount po? And I have learned from your reply here sa comment section about the hemoglobin test level, paano po yon?
You should monitor all conditions properly, the humidity, temperature, etc. Measuring the Hemoglobin level is an alternative way of quantifying the angiogenesis. If mataas ang hemoglobin level, pro-angiogenesis. If mababa, anti-angiogenesis. But this is strictly for CAM assay with tumor implants. If walang tumor implant, you can use the commonly used technique, which is counting the 1st, 2nd, and 3rd branching points of the blood vessels.
@@DoctorJPTV thank u po.
I always heard extractions where done with alcohol, butane, propane, and co2 Infusions where done with water, oil, viniger or a low proof alcohol like wine ?
how do you get a higher recovery rate because a lot of substance is still in the flask
You can dissolve those in the flask with your extraction solvent. Put them in an evaporating dish and place them in the fume hood for a couple of days.
Hi doc! what is the suggested RPM and temp in evaporating methanolic leaf extract po?
Rpm doesn’t really matter. This depends on how fast you want to remove your solvent. Temperature depends on the rotavap’s pressure, and the boiling point of your target bioactive compounds (not the plant extract).
Noted po, thank you!
Hi Doc, ask ko lang if naka depende ba yung rpm sa amount ng leaves na gagamitin?
Nope
@@DoctorJPTV Thanks po Doc! This is really helpful in our research project po. More power to your channel! 🤩👌🏻
i wanna do smth like this when i get older
hello sir, we are also conducting a research regarding CAM Assay, I would like to ask if what is the incubator used for the incubation of eggs?
I don't get it, ah why did u have to do the rotary evaporation(?) for plant extraction if the filtered solution on the first part is already the plant extract??
Hi sir. Are there any alternatives for rotary evaporator? Can you use simple heating to remove the solvent?
Hello doc. This is out of topic but can you suggest a study relating to natural products? I am currently pursuing my master's degree in Biology and I am trying to find a research topic related to natural products. Thank you in advance!
I can’t. You have to formulate and conduct your own literature review. Thanks
Hello. For the negative control, do we still need to make a 1x1 window even if we should not add any solution or do we do it upon counting the blood vessels?
Nope. It’s not necessary.
May I ask po doc if possible if paper disc would be used to apply the treatment instead of pippeting?
Apply where?
Hi doc! Our study po is the effectiveness of c. ternatea linn in lowering blood sugar of alloxan-induced rats. We’ve chosen po the decoction method to extract the C.ternatea. Can I ask po what specific temp and for how long we will boil the C.ternatea? And, what can we use po to filter the extract after boiling?
For the temperature, it depends on what bioactive compounds with sugar-lowering properties you want to extract from the plant. But in general as long as it doesn’t rich 100C to prevent the bioactive compounds from degradation would be enough. You can use a filter paper afterwards to separate the plant material from the extract.
@@DoctorJPTV Hi doc! What type and brand of filter paper can we use to extract C. ternatea linn? Thank you in advance.
@@bobbyluckywife whatman
@@DoctorJPTV Any grade/number po ba ng Whatman?
Hi doc! What did you use po for filtration? Which is better po to use for filtration, cartridge of UF membrane or qualitative filter paper?
Wow this is 3yrs video and it's helpful to me this year thank you so much Doc.
Hello Doc, I would like to ask if it is possible that after decoction, I filter the mixture through a whatman filter paper and freeze dry the liquid extract without the use of a centrifuge and rotary evaporator? (I am using an aqueous extract)
Yes, you can. 😊
Hi doc, can you make content about extracting polyglutamic acid from soybean and turning into a powder?
Hi, did you get the plant powder by using mortar and pestle?
We freeze-dried our plant sample and pulverized it using a milling machine.
@@DoctorJPTV How do you dry a plant? What is the best way to dry roots without a lost effective compound?
Hello po! Do you know any laboratories here in the Philippines na nagpeperform ng CAM assay? Thank you po
hello po doc! I hope you you respond to this comment. I would really like to ask po what software your team used in quantification of the vessels. Was it done manually and how do you verify it if it was through manual method po? 😭
Hi my name is Dwaine. I have a little bio lab of my own at home.
Hi, my study is to determine the Anticancer activity with belle pepper. Can this method be use? And what is the use for the matrigel please
Can you set up a donation page so we can get you a funnel? 😛
🤣
hello po doc! can i ask lang po what is supposed to be the amount of the mixture to yield a large amount of the plant extract after rotary evaporation?
hi Doc, do you have a related study about decoction method that we can use as a citation? we are currently working on a study but we are lack of citations
Thanks doc. Learned a lot