Same problem with mine, I don’t understand why nobody can help me out with this. It seems I’m not the only one. Somebody somewhere must have figured this problem out.😢
@MarkDamoreКүн бұрын
I have a Pioneer DMH-WC5700NEX with the newest firmware 3.05 per the Pioneer website and have tried this procedure over 20 times and cannot get it to work or display the “set on” message. Have tried all touch screen areas and used a stopwatch. What an I doing wrong?
@Cee-i4p3 күн бұрын
Dumbest car audio question ever.
@Dominancelogistics4 күн бұрын
I have a BT streaming 3 way crossover. Its specs lists 9v pre-amp output. Dean mentioned that some amps do not like high pre-amp output. Is 9v considered high voltage? Do specs on amps identify how much voltage it wants from an RCA signal?
@ronalexander49555 күн бұрын
I built my own box for a 2023, I’m glad I put the time and effort into it because I know a prebuilt box would’ve been disappointing and doesn’t give me the freedom to spec out the subwoofer of my choice.
@mianmuhammadtauseef62485 күн бұрын
I have a pioneer prs d2000spl amplifier it cuts the sound on low volume like 2-6 and with the delay of 2-3 second s sound comes back. But on jumping to high volume it works fine plus after like playing for afew mins its works fine even on low volume the Amp never turn off or goes on protection only the sound goes and comes what could be the reason..... HELP HELP
@Dominancelogistics7 күн бұрын
Took 8.5 minutes of explaining the obvious to only explain that all frequencies are coming through. Surely no one sits in a different seat on a vehicle, and expects to get the same sound as the driver? Nothing about this video makes any sense to cover. This all seems like common sense.
@JasonWW200015 сағат бұрын
What may be common sense for you is not going to be common sense for others. This is why he is explaining it. If you already understand everything about all pass filters, then this video is not for you.
@tgleds5 сағат бұрын
@@JasonWW2000 Honestly I didnt even know phase was a thing until I got a DSP that can fix it. But after hearing about phase, it all makes sense.
@Bob-pd9ge8 күн бұрын
You guys rock
@Bob-pd9ge8 күн бұрын
Everyone's first time is awkward Dean
@Bob-pd9ge8 күн бұрын
Why is it in a preloaded enclosure where the speakers are jumped one to the other and not wired separately each with it's own run of wire to the terminal do one of the woofers tend to get damaged more than the other
@Bob-pd9ge8 күн бұрын
You guys are one of the best things to happen to the industry
@davidstevens78099 күн бұрын
Andy. If you fix it for driver. Its ruined for passenger. TELL THE TRUTH..
@JasonWW200015 сағат бұрын
Why would you accuse him of lying? You must not have any experience with all pass filters.
@davidstevens78092 минут бұрын
@@JasonWW2000 I didnt. I SORTTA agreed with his first topic.. I just believe in just tuning for center of vehicle..
@davidstevens78099 күн бұрын
Andy align to center of car. For best compromise.
@JasonWW200015 сағат бұрын
That might be the second best compromise.
@kewlbug11 күн бұрын
still blocked by Andy! haha
@20smgreen12 күн бұрын
So tempted to have called the store and ask for Andy, stating that this is so-n-so wanting to inquire about the warranty on his car.... lol Always love reading from or listening to Andy.
@nicholasstephey847512 күн бұрын
Andy Andy
@hot99pas12 күн бұрын
Dynamic eq seems to be what the stock amps do, lessen bass as the music gets louder. Seems auto manufacturerejust need to make better high powered amps so people dont upgrade.
@Shut_Up_Wayne13 күн бұрын
A white board would have been nice.
@danielpridemore399715 күн бұрын
My god, you don't know just how crucial this video is to the greater industry. Thanks so much Dean + Fernando for putting these niche tutorial vids out. You've brought Mosconi software off of the exotic tech pedestal it's been on for years since it feels and looks older than the company that made it. When I'm done with my 8to12 tuning, I'm for sure crediting yall by this series right here
@user-ng1ol2ny7o15 күн бұрын
Where are you guys located at
@user-ff9rx7kq2g15 күн бұрын
Woot!!!
@Franco0316016 күн бұрын
Haha you mentioned my name
@MichaelSchmitz-r1e17 күн бұрын
What about dmh-W2770nex 😂 if you know how LMK
@matthewnewell451721 күн бұрын
From a design point of view, there's a problem. With a 6x9 I'd expect the cone to be stiffer on the narrow edge, looser on the furthest edge. A round speaker will be the same all the way around. So a 6.5" will be easier to design and money saved can go elsewhere.
@dlastmohican7122 күн бұрын
Maybe underpowered. A big sub needs some juice to get it to move. At low volumes there may not be enough wattage to move the voice coil. While it seems to be a unpopular theory in message boards, speaker sensitivity matters especially at lower watts. Subs in the 90s were low to mif 90db, some were even up into the high 90s. I have not seen any modern subs in the 90s, they are all mid 80s. However. They do handle quite a bit more power, well.... alot more power... and needing more power to move the coil.
@georgebailey630726 күн бұрын
Even Pedro was like "where's Napoleon?"
@Ninjadude8753428 күн бұрын
This really helps because I listen to everything and was planning on getting rid of types but what’s crazy is that I would not say the price on them is very budget friendly
@ATLieN562Ай бұрын
Does any of these brake bypass tricks work on the DMH C5500NEX ?? I have tried and tried by what this vid does and no luck and def shut off and return on key after fail every try. My build firmware says on device 8.13 and year June 2023 but on support current available build is 8.12? is that my issue you think?
@Outty5000HertzАй бұрын
I feel like every 3 to 6 months we hear about Orion making a comeback
@Thizz2979Ай бұрын
do set accurate bass with ace-1 off or on
@SlamryCamry19Ай бұрын
Hey i just ordered this to go in my 19 Camry that I am trying to run a four channel for the doors and a monoblock for the Sub im wondering how i should wire it since my car is the same as your truck 6x9 up front and 6.5 in the rear now im wondering if I have more bass output up front and should wire it up to the front output but my main Question is this can I take a single speaker signal and wire it to split into the first four channel's and then use the summing feature to give signal to channels 5-6 for the sub im just reading about it and watching different videos trying to verify if my thinking is correct before I wire something up wrong i just had a bad incident with my last LOC i wired it up wrong and blew my brand new AAK 6k so I definitely need to make sure I am doing it right
@paulmichalek3694Ай бұрын
Why did it measure different values between the mosmic and the rode-ai?
@MistahEliasАй бұрын
I have to comment. Thank you for this video. It worked for me today.
@witeko213 күн бұрын
Does it really work? Did you need to do any added wires or harness?
@lwhiteb100Ай бұрын
When adding a dsp how do I set the gains on the amp now?thank you.
@mikoldozier9382Ай бұрын
Nice work. How do I get a picture of that paper diagram.
@lifewith26gang45Ай бұрын
Hey I have a 2013 mustang I want a sound system what subs I can go with for the most bass???
@duffelbagdustin9944Ай бұрын
No product info???
@csquared2458Ай бұрын
Will this work for a avh1500nex? I’ve never updated or done anything to it?
@MorecocksthanhandsАй бұрын
So what direction? Are the arrows facing? Direction ti and from what?
@robrichards31462 ай бұрын
You tube music is good though right?😊
@IQdela212 ай бұрын
I had an on and off click on my stereo system. I checked the speaker wires and it went away. Thank God. So first check you wires.
@Morecocksthanhands2 ай бұрын
Direction points from the LOC to the amp??
@miicoal7102 ай бұрын
My question is do I pull signal from sub output or should I pull from a full range signal? Because I can’t pick up the Tuba in my Spanish music 😭
@idontcaresapo82332 ай бұрын
I have both in different cars both with same helix v8 and 2 12s jl audio . Both sound amazing. I can say for rock clasic rock and most music audio frogs are better but focal for vocals are crazy. The voices are so natural but it can be a bit flat for some people
@AztekM12 ай бұрын
will this work on a dmh-wt3800nex?
@springburrito10 күн бұрын
It worked for my 3800nex. When the vehicle is in motion, I still get the pop up screen saying I need to be in park to view videos. Idk how bypass it to view KZread videos
@christianlatshaw17672 ай бұрын
Still works on newest update. Took about 20 attempts. I had to hold the right corner about 12 seconds. 3800nex. Thanks bro youre a legend!
@brianjacobsen69642 ай бұрын
The information on your channel is gold! Thank you for the content.
@elielevesque85352 ай бұрын
Sorry sir , GROUND ON A BOAT ! YESS THERE ARE MULTIPLE ! 😂
@minathebunny2 ай бұрын
Thank you so much. Calculating for Zero point really improved the imaging to my ears/preference. I'm using Kenwood 1057xr HU. Now my left driver setting is dialed in. Sorry passengers.
@berkledeath56452 ай бұрын
I’ve got a problem where when I shut my doors my sub gums and wind when I accelerate
Пікірлер
Same problem with mine, I don’t understand why nobody can help me out with this. It seems I’m not the only one. Somebody somewhere must have figured this problem out.😢
I have a Pioneer DMH-WC5700NEX with the newest firmware 3.05 per the Pioneer website and have tried this procedure over 20 times and cannot get it to work or display the “set on” message. Have tried all touch screen areas and used a stopwatch. What an I doing wrong?
Dumbest car audio question ever.
I have a BT streaming 3 way crossover. Its specs lists 9v pre-amp output. Dean mentioned that some amps do not like high pre-amp output. Is 9v considered high voltage? Do specs on amps identify how much voltage it wants from an RCA signal?
I built my own box for a 2023, I’m glad I put the time and effort into it because I know a prebuilt box would’ve been disappointing and doesn’t give me the freedom to spec out the subwoofer of my choice.
I have a pioneer prs d2000spl amplifier it cuts the sound on low volume like 2-6 and with the delay of 2-3 second s sound comes back. But on jumping to high volume it works fine plus after like playing for afew mins its works fine even on low volume the Amp never turn off or goes on protection only the sound goes and comes what could be the reason..... HELP HELP
Took 8.5 minutes of explaining the obvious to only explain that all frequencies are coming through. Surely no one sits in a different seat on a vehicle, and expects to get the same sound as the driver? Nothing about this video makes any sense to cover. This all seems like common sense.
What may be common sense for you is not going to be common sense for others. This is why he is explaining it. If you already understand everything about all pass filters, then this video is not for you.
@@JasonWW2000 Honestly I didnt even know phase was a thing until I got a DSP that can fix it. But after hearing about phase, it all makes sense.
You guys rock
Everyone's first time is awkward Dean
Why is it in a preloaded enclosure where the speakers are jumped one to the other and not wired separately each with it's own run of wire to the terminal do one of the woofers tend to get damaged more than the other
You guys are one of the best things to happen to the industry
Andy. If you fix it for driver. Its ruined for passenger. TELL THE TRUTH..
Why would you accuse him of lying? You must not have any experience with all pass filters.
@@JasonWW2000 I didnt. I SORTTA agreed with his first topic.. I just believe in just tuning for center of vehicle..
Andy align to center of car. For best compromise.
That might be the second best compromise.
still blocked by Andy! haha
So tempted to have called the store and ask for Andy, stating that this is so-n-so wanting to inquire about the warranty on his car.... lol Always love reading from or listening to Andy.
Andy Andy
Dynamic eq seems to be what the stock amps do, lessen bass as the music gets louder. Seems auto manufacturerejust need to make better high powered amps so people dont upgrade.
A white board would have been nice.
My god, you don't know just how crucial this video is to the greater industry. Thanks so much Dean + Fernando for putting these niche tutorial vids out. You've brought Mosconi software off of the exotic tech pedestal it's been on for years since it feels and looks older than the company that made it. When I'm done with my 8to12 tuning, I'm for sure crediting yall by this series right here
Where are you guys located at
Woot!!!
Haha you mentioned my name
What about dmh-W2770nex 😂 if you know how LMK
From a design point of view, there's a problem. With a 6x9 I'd expect the cone to be stiffer on the narrow edge, looser on the furthest edge. A round speaker will be the same all the way around. So a 6.5" will be easier to design and money saved can go elsewhere.
Maybe underpowered. A big sub needs some juice to get it to move. At low volumes there may not be enough wattage to move the voice coil. While it seems to be a unpopular theory in message boards, speaker sensitivity matters especially at lower watts. Subs in the 90s were low to mif 90db, some were even up into the high 90s. I have not seen any modern subs in the 90s, they are all mid 80s. However. They do handle quite a bit more power, well.... alot more power... and needing more power to move the coil.
Even Pedro was like "where's Napoleon?"
This really helps because I listen to everything and was planning on getting rid of types but what’s crazy is that I would not say the price on them is very budget friendly
Does any of these brake bypass tricks work on the DMH C5500NEX ?? I have tried and tried by what this vid does and no luck and def shut off and return on key after fail every try. My build firmware says on device 8.13 and year June 2023 but on support current available build is 8.12? is that my issue you think?
I feel like every 3 to 6 months we hear about Orion making a comeback
do set accurate bass with ace-1 off or on
Hey i just ordered this to go in my 19 Camry that I am trying to run a four channel for the doors and a monoblock for the Sub im wondering how i should wire it since my car is the same as your truck 6x9 up front and 6.5 in the rear now im wondering if I have more bass output up front and should wire it up to the front output but my main Question is this can I take a single speaker signal and wire it to split into the first four channel's and then use the summing feature to give signal to channels 5-6 for the sub im just reading about it and watching different videos trying to verify if my thinking is correct before I wire something up wrong i just had a bad incident with my last LOC i wired it up wrong and blew my brand new AAK 6k so I definitely need to make sure I am doing it right
Why did it measure different values between the mosmic and the rode-ai?
I have to comment. Thank you for this video. It worked for me today.
Does it really work? Did you need to do any added wires or harness?
When adding a dsp how do I set the gains on the amp now?thank you.
Nice work. How do I get a picture of that paper diagram.
Hey I have a 2013 mustang I want a sound system what subs I can go with for the most bass???
No product info???
Will this work for a avh1500nex? I’ve never updated or done anything to it?
So what direction? Are the arrows facing? Direction ti and from what?
You tube music is good though right?😊
I had an on and off click on my stereo system. I checked the speaker wires and it went away. Thank God. So first check you wires.
Direction points from the LOC to the amp??
My question is do I pull signal from sub output or should I pull from a full range signal? Because I can’t pick up the Tuba in my Spanish music 😭
I have both in different cars both with same helix v8 and 2 12s jl audio . Both sound amazing. I can say for rock clasic rock and most music audio frogs are better but focal for vocals are crazy. The voices are so natural but it can be a bit flat for some people
will this work on a dmh-wt3800nex?
It worked for my 3800nex. When the vehicle is in motion, I still get the pop up screen saying I need to be in park to view videos. Idk how bypass it to view KZread videos
Still works on newest update. Took about 20 attempts. I had to hold the right corner about 12 seconds. 3800nex. Thanks bro youre a legend!
The information on your channel is gold! Thank you for the content.
Sorry sir , GROUND ON A BOAT ! YESS THERE ARE MULTIPLE ! 😂
Thank you so much. Calculating for Zero point really improved the imaging to my ears/preference. I'm using Kenwood 1057xr HU. Now my left driver setting is dialed in. Sorry passengers.
I’ve got a problem where when I shut my doors my sub gums and wind when I accelerate