Пікірлер

• 
  @j1n813510 күн бұрын

  You're making fun of the guy before you and you have the wrong type of bearings you need the taller bearings plus you needed the collers to keep the blower center.

• 
  @jpalacess473525 күн бұрын

  what year is have a 2001 and there is no filter what so ever to change or neither is that hole to say theres a cabin air filter missing

• 
  @MaratRPMSoCal25 күн бұрын

  @@jpalacess4735 I’m not sure what year that car was, sold it long time ago

• 
  @pedroantonio-sc9poАй бұрын

  how many hp is that?

• 
  @MaratRPMSoCalАй бұрын

  I don't remember. Was long time ago.

• 
  @edilbertomayorga7296Ай бұрын

  hello marat , thanks for your video , i have a question wher put sensor liquid line/ yellow sensor please can you explain me/

• 
  @MaratRPMSoCalАй бұрын

  Sensors themselves are the same. They color them due to better plug and play replacements. Plug for blue sensor will be different than green or yellow, so you will not be able to accidentally connect wrong sensor to where it’s not belong on controller. I swap sometimes using different colored sensors, but I always will take plug from original sensor, so next guy would not get pissed when he gets across that cooler or freezer.

• 
  @catherinelachance2239Ай бұрын

  Look like the quality of work is good but without discussion, it did not answer my question. Bummer.

• 
  @johel_rodriguezАй бұрын

  Trata intenta por favor no coloques el micrófono pegado a las herramientas mucho ruido

• 
  @mattbeallmmbАй бұрын

  I'm looking for somewhere to buy the evaporator for the retro us cooler, Could you point me in the right direction

• 
  @MaratRPMSoCalАй бұрын

  we get those at RSD, Allied or United Refrigeration

• 
  @xWiZx1Ай бұрын

  You don't run nitrogen through the Lineset when soldering?

• 
  @mariacarpenter2206Ай бұрын

  Looks fun. Can you rent wave runners there?

• 
  @MaratRPMSoCalАй бұрын

  They rebuilding all Harbor nowadays, not sure if those rental places still exist.

• 
  @ultrakoldRefrigeracion2 ай бұрын

  I just replaced an evap coil in the cook line, no acces on the top, it was a pain in the butt!! great video!

• 
  @MaratRPMSoCal2 ай бұрын

  Thanks. Yeah, some of those hard to work on✊

• 
  @NateMcCullough-pl1hd2 ай бұрын

  But you didn’t purge nitro while brazing. Hack type shi! Smh

• 
  @JT-jj3tr2 ай бұрын

  Nice uninformative video

• 
  @markrich35992 ай бұрын

  You are tucked up you are very noisey turned your dumb music off

• 
  @hh-oq8gc2 ай бұрын

  Wats the guage u use for freezer 10 awg ? For the timer clock

• 
  @MaratRPMSoCal2 ай бұрын

  I don't recall what gauge it was. This unit is pretty small so 10 AWG would definitely dot it. But go by name plate ratings.

• 
  @ChrisHernandez-fx7gl2 ай бұрын

  U suk at your job

• 
  @bertthungas3 ай бұрын

  Tengo el modelo t49f mi problema es que no congela y hace escarcha en la parte superior, supongo que podría empezar por esto, dónde puedo conseguir esta pieza?

• 
  @MaratRPMSoCal3 ай бұрын

  puedes conseguirlo en línea. Simplemente busque en Google el calentador de descongelación y el modelo de su congelador.

• 
  @sherwinalvarez73653 ай бұрын

  Were have you been.

• 
  @MaratRPMSoCal3 ай бұрын

  Was at instagram for a while)

• 
  @totalclima883 ай бұрын

  Why no recovery refrigerant ?

• 
  @MaratRPMSoCal3 ай бұрын

  didnt need to

• 
  @techti87923 ай бұрын

  That the m12 or m18 hacksaw?

• 
  @MaratRPMSoCal3 ай бұрын

  It was m18

• 
  @user-es4uy1ss2z3 ай бұрын

  Which product are you using? This video is useless without explanation

• 
  @MaratRPMSoCal3 ай бұрын

  nu calgon blue version

• 
  @leenassoenergysolutionsllc17194 ай бұрын

  To loud

• 
  @user-up2eg2ed4e5 ай бұрын

  How much does this setup cost ?

• 
  @MaratRPMSoCal5 ай бұрын

  It was done long time ago, prices changed a lot since then

• 
  @user-up2eg2ed4e5 ай бұрын

  How much would that set up cost today

• 
  @MaratRPMSoCal5 ай бұрын

  @@user-up2eg2ed4e Im not sure. Need to get quotes from suppliers on the equipment and box, every time we get across those jobs. Those jobs quoted per request. We don't follow prices our selves all the time on equipment because its very big variety of different applications (so are prices on equipment), so all of those jobs priced differently depend on each job and difficulty of installation.

• 
  @MaratRPMSoCal5 ай бұрын

  @@user-up2eg2ed4e that exact job today labor wise we would do for 6-7K

• 
  @stevechristian52575 ай бұрын

  You left that factory rubber boot in that line when you silver brazed the other two

• 
  @MaratRPMSoCal5 ай бұрын

  well, that's how I did I guess)

• 
  @jclcc99966666665 ай бұрын

  The damn flaps that tell the ice to fall popped out and I can't get them back in. Any ideas

• 
  @MaratRPMSoCal5 ай бұрын

  They hard to put back properly. there are little pins in the reservoir that should line up perfectly with that ice deflector covers - it a bit a task.

• 
  @zuki75045 ай бұрын

  Bro thank youuuu for this video, replacing one today, it’s alittle bit older than this model but same thing going on ur a savior watched to get a good feel for what was diving into

• 
  @MaratRPMSoCal5 ай бұрын

  Glad It was a useful !!

• 
  @99neworleans6 ай бұрын

  You know how to fix air conditions but you don't know how to make a video

• 
  @MaratRPMSoCal4 ай бұрын

  thanks

• 
  @rigakit6 ай бұрын

  Why did you?

• 
  @rigakit6 ай бұрын

  Why did you change the evaporator?

• 
  @MaratRPMSoCal6 ай бұрын

  @@rigakit Customer requested to change all equipment.

• 
  @manhpham80527 ай бұрын

  What is the purpose of the panel u guy screw in on the ceiling panel in front of the evaporator coil???

• 
  @MaratRPMSoCal6 ай бұрын

  It was there, so we assume customer trying to reflect cold air away from the door. We left it there.

• 
  @Mrpremiosneakers7 ай бұрын

  Bro couldn’t even tell us what size the nuts are.

• 
  @OcRefrig7 ай бұрын

  Good vid ! I did a video on exact same repair. Walk in cooler though. Same leak. Top temperature safety plug. Mine was a Old unit. About 20 years old.

• 
  @MaratRPMSoCal6 ай бұрын

  Yep. I did replace those few times before. Not common, but happens.

• 
  @OcRefrig6 ай бұрын

  @@MaratRPMSoCal yea, definitely not common. But, something to Allways check. Its hidden under a sticker sometimes too. Sneaky little suckers.

• 
  @mohammadnaseerquraishy67257 ай бұрын

  YOU WILL DEFINITELY SCRACH SOMEONES FLOOR, BE PROFESSIONAL AND USE A MOVING BANKET

• 
  @MaratRPMSoCal7 ай бұрын

  Got it. Thanks.

• 
  @andreyvadimovich39217 ай бұрын

  А рессивер есть? Не увидел.

• 
  @MaratRPMSoCal7 ай бұрын

  Da, s receiverom

• 
  @andreyvadimovich39217 ай бұрын

  Привет, я уж в конце видео подумал, что английский язык начал идеально понимать😂😂😂 Сайд глас😂

• 
  @MaratRPMSoCal7 ай бұрын

  😂

• 
  @briansmith61358 ай бұрын

  Good to see nitrogen being used while welding pipes,not!!

• 
  @MaratRPMSoCal4 ай бұрын

  Glad you liked it tho👍

• 
  @popsmccartney4358 ай бұрын

  Great job.

• 
  @MaratRPMSoCal8 ай бұрын

  Thank you 🫡

• 
  @customdetailer00788 ай бұрын

  Nice job. Looks like you were prepping in your garage. Beautiful Christmas decorations on your street. Merry Christmas and happy New Year early.

• 
  @MaratRPMSoCal8 ай бұрын

  Thank you! I try to do as much as I can to not spend much time at the job site. Happy Holliday to you as well ✊

• 
  @philltafolla8 ай бұрын

  Looks like a wine cellar coil 😬

• 
  @maratbrykau56258 ай бұрын

  You can use those as high or mid temp just adjust your TXV accordingly 👍

• 
  @philltafolla8 ай бұрын

  @@maratbrykau5625 I’ve used those on wine cellars only . Good stuff Marat

• 
  @jimmunoz48848 ай бұрын

  To what wires did you connect to the controller to get it power?

• 
  @MaratRPMSoCal8 ай бұрын

  I guess just got condenser wire break of that thermostat. I don't remember those older service calls I did back days.

• 
  @johnwallace62508 ай бұрын

  what lubricant did you use around the 8 minute mark? (black gold?) Where did you put it on the seal?

• 
  @MaratRPMSoCal8 ай бұрын

  I don't recall, was such a long time ago. I think whatever paper work was saying with that seal

• 
  @blakegunter55238 ай бұрын

  Can you do it without the music next time?

• 
  @MaratRPMSoCal8 ай бұрын

  sure!👌

• 
  @andreyvadimovich39218 ай бұрын

  Привет, рад снова видеть гуд джоб. 😊. А фреон, если нет возможности собрать, в атм.?и вообще вы его собираете?

• 
  @MaratRPMSoCal8 ай бұрын

  Spasibo. Privet. Konechno. sobiraem, no esli nebolshaya systema ne ispol'zuem chto sobrali👌

• 
  @shine-cg9uf8 ай бұрын

  🇺🇸❄️💪👍 discipline and patience with those units. Nice work

• 
  @MaratRPMSoCal8 ай бұрын

  👍Thank you

• 
  @shine-cg9uf8 ай бұрын

  🇺🇸❄️💪👍 nice work. Receiver change can b a PITA cause its bolted underneath.

• 
  @MaratRPMSoCal8 ай бұрын

  That's true. Went smooth this time.🙂

• 
  @WswRefrigeration8 ай бұрын

  I hope you took those jugs of 404. I don’t understand why other contractors just leave money laying around at places

• 
  @MaratRPMSoCal8 ай бұрын

  Thanks for watching. I left those there, not sure if they even have any gas in there👍

• 
  @philltafolla8 ай бұрын

  Good repair Marat . I’m thinking that receiver was probably overfilled and that caused it to leak . It exceeded the pressure tolerance. Happy thanksgiving 🦃🍁🍽😄

• 
  @MaratRPMSoCal8 ай бұрын

  they rate that plug to temperature. So how I understand It got hot. ✌

• 
  @customdetailer00788 ай бұрын

  Great seeing a new video from you. Best regards from Las Vegas, Nevada

• 
  @MaratRPMSoCal8 ай бұрын

  Thank you👍 Vegas rules.

• 
  @MariosACandRefrigeration8 ай бұрын

  nice work,how many pounds did it take,do you clear glass and then add winter charge ?

• 
  @MaratRPMSoCal8 ай бұрын

  Thank you✌We don't do winter charge here in Southern CA on those units. Unit has Headmaster from manufacture.

• 
  @sterlingarcher468 ай бұрын

  Nice havin you back Marat mate 👍

• 
  @MaratRPMSoCal8 ай бұрын

  🫡 Thank you mate✌

• 
  @partsfe8 ай бұрын

  This tutorial is a priceless guide for anyone seeking Preventative Maintenance Services.

• 
  @MaratRPMSoCal8 ай бұрын

  Thank you!

• 
  @sterlingarcher468 ай бұрын

  I hate working on this stuff , no space at all snd you keep cutting yourself on everything inside ! And the cooks keep tripping over you and your tools !

• 
  @MaratRPMSoCal8 ай бұрын

  Yeah, those are hard to work on. Had to work on it after they closed. They emptied that box for me with was helpful