Пікірлер

• 
  @neilcrowley125511 сағат бұрын

  Thank you so much. The upside down key hole on my door has been bothering me for years. I ordered the tools and followed your instructions. Very happy. Thank you.

• 
  @VintageToyTheatre23 сағат бұрын

  My friend's family always took me here on Friday nites in the 80s since he played baseball and would practice at the batting cage. After that we'd ride go carts. I seem to remember a food shack there and getting pizza and popsicles. Good times!

• 
  @commonleadership482 күн бұрын

  Outstanding tutorial. I believe I can do it now. My model is a little different, but the process is the same.

• 
  @michellesmith59943 күн бұрын

  Mine doesn't have nut :(

• 
  @anthonyD23655 күн бұрын

  Thank you you are a great man. I was told by my local mechanic. The whole bumper would have to be taken off and it was a $540 job wow thank you so much. The girl at AutoZone was honest and ready to do it herself, but it was a little too much work God bless you.

• 
  @Jmp64-ns8zl5 күн бұрын

  I want to know why the heck Kwikset does it in the first place? Try and coerce folks to buy that stupid tool they sell? It's such a pita.

• 
  @willbaggett78756 күн бұрын

  2 of my seven came upside down. Garbage

• 
  @DougForce6 күн бұрын

  @willbaggett7875 It is frustrating-they make these locksets to be modifiable to support doors with left or right hand handle, but they don’t document how and why - which frustrates us!

• 
  @slawomirstaron31928 күн бұрын

  Doesn't working on my GMC Sierra 2018

• 
  @DougForce6 күн бұрын

  I’ve heard that some keyfobs are not compatible with this process.

• 
  @cassiebquerica11 күн бұрын

  I can’t get my valve to turn. It’s so corroded. Any tips!

• 
  @DougForce11 күн бұрын

  @cassiebquerica That happens when the valves sit for years. Usually if you can get a valve to turn after soaking it with penetrating spray, your best bet is to cut it off. Hopefully you have enough pipe sticking out to add on a new SharkByte valve.

• 
  @edschoenstein189312 күн бұрын

  I dont get the initial dsiplay

• 
  @DougForce11 күн бұрын

  @edschoenstein1893 What year is your vehicle?

• 
  @GLS.2515 күн бұрын

  Now I need to figure out why my ‘03 smells weird.

• 
  @DougForce11 күн бұрын

  @GLS.25 It’s most likely whatever is inside the blower area where the filter should be. You can cut a slot into the housing - replacement doors are on Amazon, dig out the material in the and replace with a new filter. Big job but it might be your only option to kill that smell.

• 
  @Nojnoj16 күн бұрын

  Hello, so i have a tv that seems to turn on, but the panel does not turn on, i'm assuming it is not the ps board in my case. Do you have any idea what the issue could be? i'm thinking it's either the screen itself, or the logic board.

• 
  @DougForce11 күн бұрын

  @Nojnoj Hi, sounds like your power board is ok so you are on the right track - most likely the screen itself or logic board. See if you can check voltage where it powers the screen - that will help eliminate choices….

• 
  @Nojnoj11 күн бұрын

  @@DougForce will do!

• 
  @Nojnoj7 күн бұрын

  It's taking a bit of extra time to be able to get ahold of the tools needed. But I wanted to take the time and thank you for replying so fast to a comment for a video you posted 3 years ago. I truly appreciate it. ​@@DougForce

• 
  @DougForce6 күн бұрын

  Glad to help if I can! I appreciate my viewers and always try to reply. Let me know how it goes!

• 
  @macpsu9418 күн бұрын

  Thank you sir!!!

• 
  @DougForce11 күн бұрын

  @macpsu94 My pleasure - glad it was helpful!

• 
  @b.dobalina19 күн бұрын

  This was the fix for my fridge! Seems so silly that a tiny plastic piece would require complete replacement of the whole apparatus but so it goes. And holy smokes, it took all my might to pull that panel off in the beginning!

• 
  @DougForce11 күн бұрын

  @b.dobalina Glad to hear you were able to fix it yourself! And yeah - dumb plastic piece should have been stronger. The panel can surly stick, can’t it! lol

• 
  @davidduff987122 күн бұрын

  I didn’t know a could use compression on plastic.

• 
  @DougForce22 күн бұрын

  @davidduff9871 To be honest, I wasn’t sure either but it worked fine and still in place. I was expecting copper but was surprised with CPVC.

• 
  @mtrichie11124 күн бұрын

  Hopefully this works in older models

• 
  @DougForce11 күн бұрын

  @mtrichie111 it should definitely be similar!

• 
  @mtrichie11111 күн бұрын

  @@DougForce it worked exactly the same, thank you good sir !!

• 
  @GloBeesTravels28 күн бұрын

  Love your intro-That seems like a great camera to own.I really like the siren mode. 12:44

• 
  @DougForce26 күн бұрын

  @GloBeesTravels Thanks for checking out the video! I’m enjoying your channel as well-I think we are both Memphis area as well!

• 
  @TheclassicYouTubechannelАй бұрын

  What was bad with it?

• 
  @DougForceАй бұрын

  It would not connect with the sensor.

• 
  @Flotown50Ай бұрын

  This is a top notch video. Thank you!

• 
  @DougForceАй бұрын

  @Flotown50 Thanks for the kind words!

• 
  @OisinHoyАй бұрын

  great video thanks for sharing - just what I needed

• 
  @DougForceАй бұрын

  @OisinHoy Glad it helped! Thanks for the comment.

• 
  @luisperea5593Ай бұрын

  Aaaah cool feature! I didn’t know. Thanks.

• 
  @gunnerzane5230Ай бұрын

  Yes it does suck. I don't know how they stay in business making this junk that works half of the time.

• 
  @DougForceАй бұрын

  @gunnerzane5230 On most of their wireless stuff, I do agree with you. On this particular wired doorbell I’ve been very happy with it.

• 
  @CB-rx9grАй бұрын

  Thanks for covering this solution. The end of the the video suggests a 'part 2' with a new/alternative solution. Can you share a link to this?

• 
  @DougForceАй бұрын

  @CB -rx9gr Thanks for checking out the video. I have the part 2 device sitting on my desk but haven’t finished the review yet. It’s a much better solution than I came up with on. It’s called Switcheon if you want to Google it. Video soon hopefully!

• 
  @antoininapetro3555Ай бұрын

  Great video, great explanation, thanks!

• 
  @DougForceАй бұрын

  @antoininapetro3555 Thanks for checking it out!

• 
  @oregonwebАй бұрын

  This is exactly what I needed to know. Fixed a couple of my, annoying, upside down doorknobs. Much obliged.

• 
  @DougForceАй бұрын

  @oregonweb Glad it helped out!

• 
  @birdlynn417Ай бұрын

  This was really good. Thank you, a bunch.

• 
  @DougForceАй бұрын

  @birdlynn417 Thanks for checking it out!

• 
  @user-in8jn2os8cАй бұрын

  Doug, I just bought the model you have and need to mount it horizontally to the soffit like yours. I'm concerned that the camera can't be aimed high enough. I need for it to cover 15ft out to 75ft. The soffit is 9ft off the ground. Does that sound doable?

• 
  @DougForceАй бұрын

  @user- in8jn2os8c I think it is doable - I had to rotate the cameras so I could point them more upward instead of downward - I bet you can do the same.

• 
  @sarahstone8051Ай бұрын

  This information is great! It saved me hiring a plumber. Thank you!

• 
  @DougForceАй бұрын

  @sarahstone8051 I’m glad you found it helpful! Thanks for the note!

• 
  @donaldmagee9937Ай бұрын

  @DougForce is programming the same if you have (1) working remote? I have a 2019 GMC Denali and when I factory reset by infotainment system the other remote stopped working.

• 
  @DougForceАй бұрын

  @donaldmagee9937 The procedure with just one working key is slightly different - check out this Facebook video for details: facebook.com/share/v/rUjaLBZiKqDTsYHy/?mibextid=w8EBqM

• 
  @robertmarshall79382 ай бұрын

  Lucky you Gort is my hero l wish he was real have the small Gort a framed movie poster and two different t shirts all the best 👍

• 
  @DougForceАй бұрын

  @robertmarshall7938 Gort is my favorite robot for sure! Even though he is depicted as simple looking he has so much more power than other SciFi robots. I’ve been looking for a movie poster featuring Gort forever! Thanks for the note!

• 
  @tcdrennen2 ай бұрын

  I had to replace the blower fan resistor assembly, so I figured I'd get that filter as well. After 40 minutes poking around and bending into positions my antique bones don't appreciate, I gave up; your video confirmed what I suspected. Now to get a refund from O'Reilly...

• 
  @DougForce2 ай бұрын

  @tcdrennen Well at least you had other things to work on so you didn’t take the dash apart for nothing!

• 
  @NegdoshaManido2 ай бұрын

  A new Star Trek classic tune! Haha! Loved it! And the Enterprise is absolutely respendent. I love my Tomy Enterprise too. I have her displayed with a Klingon Bird of Prey doing a low pass over her primary hull, trying to pick a fight. It is a bit out of canon, chronologically, but it looks totally badass! Thanks for the video! I enjoyed it! LL&P! 😀

• 
  @DougForce2 ай бұрын

  @NegdoshaManido it’s truly an excellent ship model - I’m very pleased with for the price. I’d love to see your display - sounds great! Thanks for checking out the video and the kind words! 🖖

• 
  @johnkbear39012 ай бұрын

  I have my dash port apart right now. Wondering where the hell is this filter and then I stumble upon your video. 😫

• 
  @DougForce2 ай бұрын

  @johnkbear3901 Dang, wish you’d seen it first! I did the same thing, could not find that pesky filter after dash all apart.

• 
  @desidrian2 ай бұрын

  Does this work on deadbolts too?

• 
  @DougForce2 ай бұрын

  @desidrian I don’t think so - I have not seen one that works this way.

• 
  @TheJcrandazzo2 ай бұрын

  Will this work on a 2018 gmc sierra? I have a regular key and no start button.a regular ignition mounted on the column ? Thx

• 
  @DougForce2 ай бұрын

  @TheJcrandazzo Unfortunately no, if you have a column mounted key ignition these options done work.

• 
  @priyaaswani16492 ай бұрын

  Very well explained- best videos out there

• 
  @DougForce2 ай бұрын

  @priyaaswani1649 Thanks for the kind words! I’m glad it was helpful!

• 
  @planiel95462 ай бұрын

  Man this video was perfect. My family and I just moved into a new home and there’s been several hiccups, a leaky washing machine faucet was one of them. This video saved me from what I thought was going to need a call to a plumber. Thank you.

• 
  @DougForce2 ай бұрын

  @planiel9546 Congratulations on the new home! I’m glad the video helped make the move in better!

• 
  @thorwitlong552 ай бұрын

  Thank you! Saved my night so I can get some sleep lol

• 
  @DougForce2 ай бұрын

  @thorwitlong55 I’m glad it helped improve your evening! Thanks for note!

• 
  @patram48802 ай бұрын

  Use a shark bite

• 
  @DougForce2 ай бұрын

  SharkBite fittings are a great option too.

• 
  @robertyanez30492 ай бұрын

  If I had only watched this video before I tore up my truck. Lol

• 
  @DougForce2 ай бұрын

  @robertyananez3049 Murphy’s law! Wish you could have avoided the hassle too! I feel your pain! 😃

• 
  @bart74272 ай бұрын

  Hey do you know how to fix it if the sprocket nose tip won’t rotate? Thanks

• 
  @DougForce2 ай бұрын

  Bart7427 I’ve never had that issue but check to see if nose is pinched. If so that can keep it from rotating. Also it can get gunk jammed in it - it should take grease and if it ran dry it might be packed with sawdust. Last resort you can get a new bar for a small price on eBay. Good luck with it!

• 
  @dcs24852 ай бұрын

  Thanks for the video, ya just saved me a migraine 👍🏼

• 
  @DougForce2 ай бұрын

  @dcs2485 Glad to hear it helped out! Very frustrating to disassemble the dash for nothing!

• 
  @Prettyjoey743582 ай бұрын

  This helped me and I appreciate it

• 
  @DougForce2 ай бұрын

  @prettyjoey74358 I’m glad to hear it was useful! Thanks for the note!

• 
  @LoriKoschnick2 ай бұрын

  Chain brake -- thank you!!! 😅

• 
  @DougForce2 ай бұрын

  @lorikoschnick I’m glad it was useful!!

• 
  @billbrasher34373 ай бұрын

  Yep. Just discovered that. 😂

• 
  @DougForce3 ай бұрын

  @billbrasher3437 Hope you didn’t take too much apart before you discovered it?

• 
  @billbrasher3437Ай бұрын

  @dougforce just the cover. But great idea to add one. That’s on my list.

• 
  @caarlosrodriguez3 ай бұрын

  Thank you this safe me money and time

• 
  @DougForce3 ай бұрын

  @caarlosrodriguez I’m glad it was useful to you! Thanks for the note!

• 
  @charlesames49333 ай бұрын

  Well done!!!$ im definitely gonna try this on my rental property 👍🏾today

• 
  @DougForce3 ай бұрын

  @charlesames4933 I hope it resolves your issue! Good luck!

• 
  @beixingzhiguang39753 ай бұрын

  man you are my hero! I will give it a try!!

• 
  @DougForce3 ай бұрын

  @beixingzhiguang3975 I really hope it helps out! It’s a pain to get to the inside coil but that’s often the source of the smell!

• 
  @dalemabry83213 ай бұрын

  Thanks!

• 
  @DougForce3 ай бұрын

  @dalemabry8321 I’m glad it was helpful! Thank YOU for the tip! Very kind of you!

• 
  @lindseyasher19823 ай бұрын

  Just an absolutely perfect video! Thank you so much, sincerely. You just saved me a bucket full of money! I appreciate you! Subscribed. :)

• 
  @DougForce3 ай бұрын

  @lindseyasher1982 I’m glad to hear the video was useful to you! Always nice to know! Thanks for subscribing!!