Пікірлер

• 
  @edelsonelias47795 сағат бұрын

  Gostaria ter uma desta pra trabalho mas não posso compra😢😢😢😢😢

• 
  @timberandtools4 сағат бұрын

  @@edelsonelias4779 someday!

• 
  @Ti-DAWGS15 сағат бұрын

  I have an old Shindaiwa pre-Echo saw. I think the quality is great and good power for the size.

• 
  @timberandtools7 сағат бұрын

  Te older ones were great too!!

• 
  @MikkallКүн бұрын

  Dude, watch your control valve. Mine started failing to kick-off on return, had to watch it close. Then the back pressure (I'm assuming) caused the filter to break off... the threads broke meaning the filter attachment assembly was done for. So got a new assembly and ran literally 1 round through it, it failed again and blew the seal on the filter. So I decided to see if I could adjust the pressure (there's an adjustment screw under the cap on the back of the control valve). Well, the stay-nut on the adjustment screw was frozen, so I held it with a wrench and cranked on the screw with the required allen wrench.... and it promptly stripped, bad. Like, hey, this is seriously cheap metal here. So I noticed the entire adjustment assembly would turn by turning the froze nut so I'm assuming it had worked itself out of adjustment via vibration. But I have no idea what the heck kind of damage might do to the adjustment assembly so I decided to just replace the valve. I wasn't EVEN going to replace with a valve from YT Industries (given the shoddy materials of the one I have). So I found a County Line one at Tractor Supply for $150. Even better news... it was the ONLY valve I could find in town that was under $360. So far, it looks like all the fittings will work. HOWEVER, the supply/return fittings on the CL valve are bass ackwards and the handle will be on the inside (between the valve and the cylinder), meaning there's no way it will work. There's a couple of cleavis pins holding the handle bracket on... so if I get REAL lucky, I'll be able to get them out and rotate the handle mount to a useable position AND the hydraulic return hose is long enough to go on top as opposed to the bottom. This is a real sh**show. The thing is a beast otherwise, but I'll be honest. 2 big White Oaks, and 1 Post Oak... the thing has split everything I've thrown at it, some REALLY big stuff, narly and knotty etc. But that's it, maybe 4 trees altogether. It's no wonder Performance Built is no longer available. I'm probably gonna bit the bullet and go Eastonmade or Ramsplitter.

• 
  @timberandtoolsКүн бұрын

  @@Mikkall yeah my filter seal blew out as well 🤷‍♂️ sounds like you had some issues but your right these had lower to spare! I split a lot by hand as well but it’s been good for me so far no doubt. Easton made are sweet but $$$$$

• 
  @MikkallКүн бұрын

  @@timberandtools I'm getting old. I split a whole old Post Oak by hand. I thought it would help get me in shape. Turns out the only thing it's doing to me is making me more sore and beat to hell than the last time. ;)

• 
  @timberandtoolsКүн бұрын

  @@Mikkall haha yeah truth!!! Splitting with a machine will keep you in shape plenty !

• 
  @mike70448633 күн бұрын

  Actually it's a good thing . Ever notice on a gas chainsaw you get half way through and it binds up ......we'll this is just the same thing only it shuts the chain saw off to protect it . Same way with the lawnmower ect

• 
  @timberandtools3 күн бұрын

  @@mike7044863 no it’s not that at all. It’s legitimately broken. I run a chainsaw for a living and this isn’t binding or getting cut in the cut…

• 
  @mike70448633 күн бұрын

  @timberandtools I have the 80volt lawnmower and its the bomb . Yet it will shut down if I hit a hayfield . I think as long as you keep the blade xtra sharp it'll make a diff. I've seen a few other vids and they seem pleased with it

• 
  @timberandtools3 күн бұрын

  @@mike7044863 I have the 80v weed wacker and it’s great. This chainsaw sucks lol it is definitely broken.

• 
  @mike70448633 күн бұрын

  @timberandtools ya I got the weed Wacker as well . Batt on lawnmower obviously goes out quicker under stress but I can do my back yard , front yard and both of my neighbors front yards with 2 bars left on batt after I'm done . Chain saw I'm sure that blade needs to be sharpened each use .....I sharpen my own with a dremel while it's on the saw so I'm going to give this a shot

• 
  @timberandtools3 күн бұрын

  @@mike7044863 chain was sharp, even put a smaller 16” bar on it too same

• 
  @gmeister035 күн бұрын

  Idk if you got a new one, but you can hear the rpm’s are down. Might be a bad motor. Did you replace it yet?

• 
  @timberandtools5 күн бұрын

  @@gmeister03 no not yet

• 
  @timberandtools5 күн бұрын

  @@gmeister03 it was never right

• 
  @PurpleNovember6 күн бұрын

  Oops

• 
  @timberandtools6 күн бұрын

  @@PurpleNovember just glad I didn’t roll it over

• 
  @PurpleNovember6 күн бұрын

  @@timberandtools No kidding! I’ve seen it happen that way quite a few times. Do you have cribbing on the truck?

• 
  @timberandtools6 күн бұрын

  @@PurpleNovember no just the outrigger pads! Never had this issue before. My brother in laws brother went over in one years ago tho

• 
  @timberandtools6 күн бұрын

  @@PurpleNovember keep cribbing on the crane though

• 
  @EvanWolfe-ec2fk6 күн бұрын

  Take it back to HF and they will replace it! Sounds like it may have a thermal switch that’s tripping.

• 
  @timberandtools6 күн бұрын

  @@EvanWolfe-ec2fk sounds like a culprit no doubt

• 
  @outdoorsinthe6086 күн бұрын

  Yikes!

• 
  @timberandtools6 күн бұрын

  @@outdoorsinthe608 yeah I kinda felt a bit of center and thank god i checked!!!

• 
  @PurpleNovember10 күн бұрын

  Slow is smooth and smooth is fast.

• 
  @timberandtools10 күн бұрын

  Everyday and twice on Sundays

• 
  @justsomecoolprayingmantisd642211 күн бұрын

  That’s awesome broski 😮🤝🤝🇺🇸 First!!!! 🎉🎉🎉 btw 😎😎🤓

• 
  @timberandtools10 күн бұрын

  @@justsomecoolprayingmantisd6422 😎😎😎

• 
  @oakiewoodsman12 күн бұрын

  Very nice!

• 
  @timberandtools11 күн бұрын

  @@oakiewoodsman thank you brother, she came out good. This is the first 250 I have ported. Definitely happy with the results 😎 will be interested to see if muffler mod makes it any better, muff is stock right now..

• 
  @oakiewoodsman11 күн бұрын

  @@timberandtools really? That is very interesting

• 
  @timberandtools11 күн бұрын

  @@oakiewoodsman absolutely. I’ll be posting more about it

• 
  @justsomecoolprayingmantisd642212 күн бұрын

  What degree you sharpen your chains on your saws?

• 
  @timberandtools12 күн бұрын

  @@justsomecoolprayingmantisd6422 it depends normal is right about 30 but if I’m cutting real hard or dead wood I’ll close that up to 15-20

• 
  @justsomecoolprayingmantisd642212 күн бұрын

  Nice brother 🤝🇺🇸. Getting ready to post mine running. But I’m gonna go home and find a nice juicy log to let it eat on 😅

• 
  @timberandtools12 күн бұрын

  @@justsomecoolprayingmantisd6422 oh heck yeah!!👍

• 
  @dustinwilt521312 күн бұрын

  Great job on that one, cutting like a beast!

• 
  @timberandtools12 күн бұрын

  Thank you! Really appreciate that😎

• 
  @PurpleNovember12 күн бұрын

  Awesome saw to port!

• 
  @timberandtools12 күн бұрын

  @@PurpleNovember she really runs good can’t wait till it’s broken in

• 
  @timberandtools12 күн бұрын

  @@PurpleNovember this was a kit saw too

• 
  @christopherpejcinovic298110 күн бұрын

  @@timberandtools whats a kit saw?

• 
  @timberandtools10 күн бұрын

  @@christopherpejcinovic2981 from farmertech it’s a complete saw disassembled in a box. Bought it from bluesaws.com

• 
  @Erik-t7h12 күн бұрын

  If that was white oak the 440 prob would win

• 
  @timberandtools12 күн бұрын

  @@Erik-t7h they are very close no doubt, do you have both? Which on do you prefer?

• 
  @Erik-t7h12 күн бұрын

  @@timberandtools I've had 372xp Husqvarna and ran 462s logging and the 462s are hurting a little on torque I like how they handle they're light but that's what made me think in hardwood a 440 prob could hold its own . We had a 461 that cut hardwood better than the 462 we had idk maybe we had a weak one

• 
  @timberandtools12 күн бұрын

  @@Erik-t7h 461 def has more torque little bit more cc but the 462 is great saw all around. They run out of hard pulling on the chain after a 28” bar. I do think the 440 has more torque though just a touch they are very close no doubt. 372 great saws as well

• 
  @Erik-t7h12 күн бұрын

  @@timberandtools yeah 462 is a good saw

• 
  @timberandtools12 күн бұрын

  @@Erik-t7h they are 100%

• 
  @lntkernow13 күн бұрын

  Just bought myself a 2nd hand, 3 year old ms170, it’s not even arrived yet but already I know I’m going to give this a go! As well as side chain tensioner and felling dogs 🙌🏻🙏

• 
  @timberandtools13 күн бұрын

  @@lntkernow for what they are they’re good 👌🏻 you gonna post a video for us!?

• 
  @lntkernow12 күн бұрын

  @@timberandtools maybe! I do more camping and hiking vids usually. Would like to try carving something for the garden though

• 
  @timberandtools12 күн бұрын

  @@lntkernow very cool 😎

• 
  @PurpleNovember13 күн бұрын

  So much easier when there’s a nice landing!

• 
  @timberandtools13 күн бұрын

  @@PurpleNovember yeah, this was quite a monster white pine. Removed a lot of it from over the house before we could send it 🪓

• 
  @justsomecoolprayingmantisd642214 күн бұрын

  I got that pipe from Amazon for cheap so I bought it. I had it totally different but redone it.

• 
  @justsomecoolprayingmantisd642214 күн бұрын

  @Timberandtools - hey buddy I finally posted a video even though I didn’t get it finished or it’s not running, but just wanted to share and show ya. I’ll be giving you a shout out in my description 👍🤝🇺🇸

• 
  @timberandtools14 күн бұрын

  @@justsomecoolprayingmantisd6422 nice!! I’ll check her out now 👌🏻💥

• 
  @timberandtools14 күн бұрын

  @@justsomecoolprayingmantisd6422 just subbed

• 
  @justsomecoolprayingmantisd642213 күн бұрын

  @@timberandtools subscribing you as well friend 🤝🇺🇸. Sorry I didn’t even think about it before or I’d done that sooner

• 
  @timberandtools13 күн бұрын

  @@justsomecoolprayingmantisd6422 thanks!

• 
  @PurpleNovember14 күн бұрын

  Nice! Enjoying the summer up there?

• 
  @timberandtools14 күн бұрын

  Yeah, been pretty nice here. You surviving the heat down there ?

• 
  @PurpleNovember14 күн бұрын

  @@timberandtools Not really. This is our fifth summer down here and up until now we only thought Floridians hibernated briefly in the winter. Heat index of 110 is brutal down here! There’s a few transplants that are out in it that don’t mind but everyone else isn’t having it. Our pool isn’t heated or anything and it’s been mid 87’s to low 88’s since the beginning of June. Florida is usually cooled in the summer by the giant thermal mass surrounding it called the Atlantic and Gulf. Ocean temperatures are up this year, history says it’s just nature’s cycles.

• 
  @timberandtools14 күн бұрын

  @@PurpleNovember I am not sure if I’d survive the heat but you have to have a pool no doubt!!!!

• 
  @johnsonmurillo707615 күн бұрын

  That’s wrong

• 
  @timberandtools15 күн бұрын

  @@johnsonmurillo7076 appreciate the input, thank you

• 
  @dustinwilt521317 күн бұрын

  Hybrid getting it done

• 
  @timberandtools16 күн бұрын

  @@dustinwilt5213 she’s a tree slayer !!!

• 
  @KasmkhanKhan-ls5fb17 күн бұрын

  ❤❤❤❤❤❤❤

• 
  @Brian2bears19 күн бұрын

  Nice condition to boot....T&T.... .

• 
  @timberandtools19 күн бұрын

  @@Brian2bears she is for now 🤷‍♂️😎

• 
  @pallmall549519 күн бұрын

  Pop-Up piston or just major porting?

• 
  @timberandtools19 күн бұрын

  Major porting and machine work by Dustin wilt

• 
  @pallmall549519 күн бұрын

  That is about the size and weight of the crotches I pick up ....in bars every night.

• 
  @dustinwilt521319 күн бұрын

  Looks like it’s chewing pretty good!

• 
  @timberandtools19 күн бұрын

  @@dustinwilt5213 oh yeah letting her eat!

• 
  @dustinwilt521320 күн бұрын

  Big boy toys!

• 
  @timberandtools20 күн бұрын

  @@dustinwilt5213 the hybrid cut this one ☝🏻 😎😎😎

• 
  @dustinwilt521320 күн бұрын

  @@timberandtools I hope it took care of it well

• 
  @timberandtools20 күн бұрын

  @dustinwilt5213 she sure did! Like butter she cut her

• 
  @chefgiovanni20 күн бұрын

  Funny review. You use a chainsaw like my dead grandpa. I have never seen anyone try to starting chainsaw with the blade cover on it. I run STIHL 021 for over 25 years. Going to get a new STIHL. Thanks for the review.

• 
  @timberandtools20 күн бұрын

  @@chefgiovanni 🤣🤣🤣thanks appreciate it

• 
  @mariedolan-nq7zq13 күн бұрын

  U run chainsaws for 25 years and think a chainsaw has a blade

• 
  @timberandtools13 күн бұрын

  💥

• 
  @user-kn5wz5gu3t20 күн бұрын

  Nice feather ruffle .pleas😢e use the ppe.we the old school would like your future vids

• 
  @timberandtools20 күн бұрын

  @@user-kn5wz5gu3t right on 👌🏻

• 
  @Bustedkuhnuckles21 күн бұрын

  Just got one off a buddy he used it twice I paid $85 for it. How’s your still holding up? I’m planning to use it to clear some small overgrowth trees in back half of woods that o haven’t cleared in 4-5 years

• 
  @timberandtools21 күн бұрын

  @@Bustedkuhnuckles she still runs great!

• 
  @kai626525 күн бұрын

  Chains to tight

• 
  @timberandtools25 күн бұрын

  @@kai6265 yes it definitely was on there too tight. That is the way that I got it right from the dealer.

• 
  @justsomecoolprayingmantisd642225 күн бұрын

  I fabricated me an exhaust for it 🤝. I will post video if you want to check it out sometime

• 
  @timberandtools25 күн бұрын

  @@justsomecoolprayingmantisd6422 Post her up!

• 
  @pallmall549526 күн бұрын

  I like living in mobile homes. The wind blows my house through the trees, versus getting trees through your home

• 
  @timberandtools26 күн бұрын

  @@pallmall5495 yeah definitely have some nasty tree damage lately!

• 
  @Frankowars26 күн бұрын

  The saw is just the engine, the chain does all the work, cheap saw, expensive chain

• 
  @timberandtools26 күн бұрын

  @@Frankowars this was a HIPA (china) chain.

• 
  @UrCheecks65Ай бұрын

  do you sell polished ones?

• 
  @timberandtoolsАй бұрын

  No I don’t but it could be done. Send me an email 👌🏻

• 
  @justsomecoolprayingmantisd6422Ай бұрын

  I'll video my exhaust build on mine here soon and post it.

• 
  @timberandtoolsАй бұрын

  Absolutely 💯

• 
  @justsomecoolprayingmantisd6422Ай бұрын

  Getting ready to build exhaust for my 036 Pro 😎🤝🤘

• 
  @timberandtoolsАй бұрын

  036 is a great saw 💥💥

• 
  @justsomecoolprayingmantisd642219 күн бұрын

  @timberandtools - thanks buddy 🤝. I am doing final preparations on it and will post video tonight hopefully. I had to clean up my welds a little bit because I believe my gas was about out on welder and looked crappy. I’m ocd on my welding, but as long as it’s burnt in and holds is all that matters right lol. Ill let you know when I post it

• 
  @timberandtools19 күн бұрын

  @justsomecoolprayingmantisd6422 sounds good!!👌🏻

• 
  @westonberndt3194Ай бұрын

  I broke that white piece that holds the choke. Now what?

• 
  @timberandtoolsАй бұрын

  Well short of trying some sort of plastic repair you’ll need to change the whole piece out to repair that.

• 
  @user-zu3zz9th9qАй бұрын

  👍👍🌲🌲🌳🌳👊🏼💔💔💔💔

• 
  @trvr_indsАй бұрын

  Just got 1 myself and biggest gripe is exactly what you mentioned with that factory chain being so damn aggressive and choppy. Slings big shit right back in the face of not careful. Glad I came across your vid man. And Iv been deciding on doing the 1/4 pitch swap. Have Egan pipe and dagws otw now then retune time so deff excited to get this thing set up right and rippin

• 
  @timberandtoolsАй бұрын

  Absolutely, she’ll be good to go after that !!

• 
  @kembanggula4772Ай бұрын

  why would you use so much energy to turn the log? I watched log splitter video previously and that guy was smart. didn't use so much energy to turn and split the wood. he splitted little by little. he also had the same log splitter like yours.

• 
  @timberandtoolsАй бұрын

  Just for making video I normally don’t even split big wood like that. I’ll cut it up first

• 
  @mikeraftis6332Ай бұрын

  Open up muffler hole and get rid of limiter caps and readjust carburetor.

• 
  @timberandtoolsАй бұрын

  Already done with a video up haha

• 
  @ryanpinto4613Ай бұрын

  Don’t matter if you hit he ground still cuts and splits mine is 13 years

• 
  @timberandtoolsАй бұрын

  Absolutely

• 
  @pharmdieselАй бұрын

  I'm not surprised because I have a Shindaiwa weed wicker. Their 2 stroke engines are well known to be "Good". I didn't know they made a chainsaw. Looking for a large Makita/Dolmar, but I might add the 600sx to my saws.

• 
  @timberandtoolsАй бұрын

  Yes 600sx is a great saw! Dolmar makes a killer saw as well 😎

• 
  @OliverDiGeronimo009Ай бұрын

  Nice.

• 
  @randyshaffersr.785Ай бұрын

  Ford ,Chevy , dodge ! All good cars ! But when someone gets a lemon they got it in for that brand ! Same with saws ! I’ve been cutting with mine for 4 years and I’d buy an other one !

• 
  @timberandtoolsАй бұрын

  Absolutely! I not a brand loyalist with saws. These are great👏🏻

• 
  @ErinHenderson-lp7epАй бұрын

  48” max

• 
  @timberandtoolsАй бұрын

  65”

• 
  @PurpleNovemberАй бұрын

  At least it’s coming down before it lands on the house.

• 
  @timberandtoolsАй бұрын

  Absolutely 💯 tree was toast! Sad to see it die being that it was so big