Thank you so much! I finally figured out how to remove the stopper…simply unscrew it! Wow! Thanks again!
@StefenBruh5 күн бұрын
Cant find the resistance either way because of all of my eifes fucking hair!
@adrianfranks22675 күн бұрын
Thank you! The information was clear and covered exactly what I needed
@joseph-ine4529 күн бұрын
True pleya right there. I just learn something New. Thanks !!!😊
@SuperRamon777779 күн бұрын
Emergency
@SuperRamon777779 күн бұрын
WHAT ABOUT THE ONE UNDER THE STOPPER, HOW YOU TAKE IT OFF?
@sujaymessi10 күн бұрын
This video has just 1 dislike. Quality stuff !!!
@kirstenbeyoncepadthai10 күн бұрын
Omg thank you!!! Your video was the only one that helped me finally remove the darn thing!!!🙏🙏🙏🙏
@kmdn111 күн бұрын
Unrelated question... Are you Delco?
@asencyel14 күн бұрын
Thw whole europe is using them without any issues. Why on earth this fastening is not yet widely adopted in america where hand labour intensive, glued and time consuming methods like wood dowels, biscuits, pockets holes and etc.? You can split the assembly for eternity where as you can only screw for a few times into the pocket holes before the wood fibers loos stiffness and does not hold the screw anymore...
@Schrodingersjoke15 күн бұрын
Very useful, mine was the third one of the first type of look. Thank you so much!
@keri768215 күн бұрын
Fantastic video thank you
@Unsung_Guardian16 күн бұрын
Thank you!
@Denisefairbanks21 күн бұрын
I definitely need to do this. New gas stove I’m burning everything. I’ve always had gas stoves. I don’t have a screwdriver, small enough or long enough to fit to the screw. Mine is not set up quite like yours.
@charlesgantz58653 күн бұрын
Buy a set of jeweler's screwdrivers. Then you will have a screwdriver for every small screw, including your glasses.
@MollyJones-o2r21 күн бұрын
SUPER HELPFUL.............I tried watching videos for a month............was about to call an expensive plumber. With your video, literally five minutes and I was digging wads of hair out of my drain. THANK YOU SO MUCH!!
@davo91222 күн бұрын
Who makes the first stopper you removed at 20 seconds?
@christieevenson466524 күн бұрын
Thank you so much for this! I actually was able to out this nightstand together by myself.
@michaellopez474624 күн бұрын
This is major bullshit. I cannot get mine off at all. It only closes with a slight gap allowing water to drain and doesn't budge beyond that. It's made of metal. It's not like I'm stomping on it in the shower. What possibly could cause this? I know it's not clogged and I know for a fact I didn't damage it. I used it just fine a couple days ago. It was draining normally and haven't touched it since. If only people would design products that work instead of making them so they will need to be replaced. I'm about to do the stupid smart thing and simply use a spherical heavy ball with a small finger handle. Pretty sure that will somehow last longer than the "smart" way. 😁
@alithras66624 күн бұрын
See the color of this gentleman's hair? Nuff said. After countless, incessant, asinine hours of watching idiot DIY'ers try to explain pull tabs, this video is the best. It should be pinned on the KZread home page. Wish me luck, as I can only install mine from the INSIDE (high floor condo) -- so I'm going to put the pull tabs AFTER the screen, then spline, -- then yes, tabs. I hope this works. Simply because, if I put the tab first, (this video, he is correct, of course, don't get me wrong) then spline then screen- I wouldn't be able to grab the tabs from the INSIDE of the house. Stay tuned. But thank you again sir!
@williamgaffney856126 күн бұрын
So usefull. Well explained. Thanks
@fathermetallica9427 күн бұрын
I bought one in person and then they sent me another one, why? Do I need to link the transponder number to my account?
@JstLark28 күн бұрын
Well thank you. Much luv from the hood.
@AnthonyKennedyHagerАй бұрын
Thank you!
@pamlyn1Ай бұрын
Thank you so much for making this video. It helped me so much 🙏🏻
@jecogsАй бұрын
Thank you sir
@delighted2bwithu582Ай бұрын
Thank you soooo much!!! I appreciate your calm, clear directions! :)
@professional21121Ай бұрын
Thank you for this video!
@iamcake1065Ай бұрын
You are a saint!
@bill9989Ай бұрын
Good Video. Key takeaway: very poor design. Here we are in the 21st century, 55 years after sending a man to the moon and they still can't design a bathtub stopper with an easy, obvious way to remove it.
@traciebecker6669Ай бұрын
I can't get the top part of the knob off and that is the only way I could get to anything else.
@mikelaaper9100Ай бұрын
Last time I buy one of these knives. I did a blade change and cannot get the blade to go out. Sometimes I can. But in my with a lot of force
@jibril.nsue00Ай бұрын
Simple and perfect
@phillipk.brodie9662Ай бұрын
I had the third type stopper where the top know had to come off first. After that, getting it off was pretty much easy. Thank you. 🙂
@jamesbussard2376Ай бұрын
Thank you much! Very helpful!
@benjaminwolf8276Ай бұрын
This helped give some confidence for my wife and I to attempt this. We said ‘squidge’ a lot during it. Tomorrow the silicone dries and we see how well we did!
@sarahnoble74Ай бұрын
My screens do not have springs and pull tabs broke off. They are 20 years old, the screen felt like silk so I had Ace Hardware install new screens and frames are cock-eyed. 👎
@relaxlove.3678Ай бұрын
Thank you!!
@louettacody6358Ай бұрын
Thank you so very much for this video!
@L0wSkillerАй бұрын
I'm not gonna lie to you Clyde, I hadnt even considered painting the inside of the shed I recently obtained. Thank you, so so much 🙏. Working too much and trying to get the handle on a new living space / trying to get all of my tools out of the house so I can live without reaching over things to access shelves, I ust haven't had the brainpower to compile every single thing i need to do with the shed. This has helped tremendously, thank you!!! 🤘🤘🤘🤘🤘🤘🤘
@raulnario9555Ай бұрын
I’m really thankful for this video.
@justinnoll3838Ай бұрын
So simple- thanks!!
@TLS1138Ай бұрын
THANK YOU!!!!
@Wlh1981Ай бұрын
I was able to turn the cold side to take it off. Was able to do it easily by hand. When we tried with the hot side, it was very hard to turn the base. Used a strap wrench and it was turning, but still hard. It never raised up from the base. I could have turned it 100 times and it doesn’t turn up off the plastic nut thing. Any idea how together this off? Figure the plastic nut is stripped.
@bonddav007Ай бұрын
Where did you get the gray shelf on the left
@ugirl2Ай бұрын
Can I share my EZ pass with my husbands car if we use his car to drive on vacation? Or does the car have to be registered to my name?
@legomancb1222 сағат бұрын
Yes, just add the other car's information to your EZ Pass online
@bakthavatsalamn3792Ай бұрын
None of the videos cover this topic so straight forward and clear. Thank you, I managed to clear my bathtub clog in 5 minutes with your help.
@MahaHamad-cc7zgАй бұрын
Thanks so much. You helped me a lot!
@feelins1Ай бұрын
Top bloke thank you ❤
@SupersoccerchicАй бұрын
It doesn't work for mine, even though I unscrewed the screw in the shaft of the drain. It's so annoying. It's wedged in too tight and I've already tried using a wrench to loosen the top of the drain. I just want to take it out to clean out the hair inside of it and put in the TubShroom I just bought. it's driving me nuts.
@anupamabalanmenon4771Ай бұрын
Thanks a lot!! I had no idea how to fix my planks using these.....
Пікірлер
Thank you so much! I finally figured out how to remove the stopper…simply unscrew it! Wow! Thanks again!
Cant find the resistance either way because of all of my eifes fucking hair!
Thank you! The information was clear and covered exactly what I needed
True pleya right there. I just learn something New. Thanks !!!😊
Emergency
WHAT ABOUT THE ONE UNDER THE STOPPER, HOW YOU TAKE IT OFF?
This video has just 1 dislike. Quality stuff !!!
Omg thank you!!! Your video was the only one that helped me finally remove the darn thing!!!🙏🙏🙏🙏
Unrelated question... Are you Delco?
Thw whole europe is using them without any issues. Why on earth this fastening is not yet widely adopted in america where hand labour intensive, glued and time consuming methods like wood dowels, biscuits, pockets holes and etc.? You can split the assembly for eternity where as you can only screw for a few times into the pocket holes before the wood fibers loos stiffness and does not hold the screw anymore...
Very useful, mine was the third one of the first type of look. Thank you so much!
Fantastic video thank you
Thank you!
I definitely need to do this. New gas stove I’m burning everything. I’ve always had gas stoves. I don’t have a screwdriver, small enough or long enough to fit to the screw. Mine is not set up quite like yours.
Buy a set of jeweler's screwdrivers. Then you will have a screwdriver for every small screw, including your glasses.
SUPER HELPFUL.............I tried watching videos for a month............was about to call an expensive plumber. With your video, literally five minutes and I was digging wads of hair out of my drain. THANK YOU SO MUCH!!
Who makes the first stopper you removed at 20 seconds?
Thank you so much for this! I actually was able to out this nightstand together by myself.
This is major bullshit. I cannot get mine off at all. It only closes with a slight gap allowing water to drain and doesn't budge beyond that. It's made of metal. It's not like I'm stomping on it in the shower. What possibly could cause this? I know it's not clogged and I know for a fact I didn't damage it. I used it just fine a couple days ago. It was draining normally and haven't touched it since. If only people would design products that work instead of making them so they will need to be replaced. I'm about to do the stupid smart thing and simply use a spherical heavy ball with a small finger handle. Pretty sure that will somehow last longer than the "smart" way. 😁
See the color of this gentleman's hair? Nuff said. After countless, incessant, asinine hours of watching idiot DIY'ers try to explain pull tabs, this video is the best. It should be pinned on the KZread home page. Wish me luck, as I can only install mine from the INSIDE (high floor condo) -- so I'm going to put the pull tabs AFTER the screen, then spline, -- then yes, tabs. I hope this works. Simply because, if I put the tab first, (this video, he is correct, of course, don't get me wrong) then spline then screen- I wouldn't be able to grab the tabs from the INSIDE of the house. Stay tuned. But thank you again sir!
So usefull. Well explained. Thanks
I bought one in person and then they sent me another one, why? Do I need to link the transponder number to my account?
Well thank you. Much luv from the hood.
Thank you!
Thank you so much for making this video. It helped me so much 🙏🏻
Thank you sir
Thank you soooo much!!! I appreciate your calm, clear directions! :)
Thank you for this video!
You are a saint!
Good Video. Key takeaway: very poor design. Here we are in the 21st century, 55 years after sending a man to the moon and they still can't design a bathtub stopper with an easy, obvious way to remove it.
I can't get the top part of the knob off and that is the only way I could get to anything else.
Last time I buy one of these knives. I did a blade change and cannot get the blade to go out. Sometimes I can. But in my with a lot of force
Simple and perfect
I had the third type stopper where the top know had to come off first. After that, getting it off was pretty much easy. Thank you. 🙂
Thank you much! Very helpful!
This helped give some confidence for my wife and I to attempt this. We said ‘squidge’ a lot during it. Tomorrow the silicone dries and we see how well we did!
My screens do not have springs and pull tabs broke off. They are 20 years old, the screen felt like silk so I had Ace Hardware install new screens and frames are cock-eyed. 👎
Thank you!!
Thank you so very much for this video!
I'm not gonna lie to you Clyde, I hadnt even considered painting the inside of the shed I recently obtained. Thank you, so so much 🙏. Working too much and trying to get the handle on a new living space / trying to get all of my tools out of the house so I can live without reaching over things to access shelves, I ust haven't had the brainpower to compile every single thing i need to do with the shed. This has helped tremendously, thank you!!! 🤘🤘🤘🤘🤘🤘🤘
I’m really thankful for this video.
So simple- thanks!!
THANK YOU!!!!
I was able to turn the cold side to take it off. Was able to do it easily by hand. When we tried with the hot side, it was very hard to turn the base. Used a strap wrench and it was turning, but still hard. It never raised up from the base. I could have turned it 100 times and it doesn’t turn up off the plastic nut thing. Any idea how together this off? Figure the plastic nut is stripped.
Where did you get the gray shelf on the left
Can I share my EZ pass with my husbands car if we use his car to drive on vacation? Or does the car have to be registered to my name?
Yes, just add the other car's information to your EZ Pass online
None of the videos cover this topic so straight forward and clear. Thank you, I managed to clear my bathtub clog in 5 minutes with your help.
Thanks so much. You helped me a lot!
Top bloke thank you ❤
It doesn't work for mine, even though I unscrewed the screw in the shaft of the drain. It's so annoying. It's wedged in too tight and I've already tried using a wrench to loosen the top of the drain. I just want to take it out to clean out the hair inside of it and put in the TubShroom I just bought. it's driving me nuts.
Thanks a lot!! I had no idea how to fix my planks using these.....