Пікірлер

• 
  @MikeBaxterABC16 күн бұрын

  Just saying ... It seems like a HUGE ordeal .. so many guys a rented place?? What's in the 16 foot tall tank??? .. A highschool kid could do this in his mom's basement in a couple of weeks max. 2 years go by and you didn't sell ONE yet?? How much did you spend on rent and salaries so far... after 2 years? If I had the cash to set up, Once the CNC mill was delivered, (just a simple 3 axis), a cut off saw, and three billets of aluminum .. and I'd have saleable product ready to go in ten days, in my basement .. and most of that time would be setting up the web site. Sorry just saying what everyone is thinking. :(

• 
  @perryschaad876624 күн бұрын

  Spray the brush p o r in there with a weed sprayer if you have to through the holes

• 
  @perryschaad876624 күн бұрын

  Greece and wax aren't going to do that much. Especially if it's still compromised, they're just going to sleep out.Gotta kill the rust , leave it there , but turn it to stone P o r fourteen brush kind , not the spray!

• 
  @perryschaad876624 күн бұрын

  I think I would take a pressure washer.Take the plugs out and blast it out for quite sometime.Then put the muratic acid Stick out with the pressure washer then let it dry big time!! And then 3 guesses, the first 2 don't count.Put the POR to it, let that dry.It will turn to Stone, no more troubles. Fricking rookie l o l

• 
  @charleswittmer2477Ай бұрын

  did you get your fine from osha yet?

• 
  @rickjans664Ай бұрын

  I would skip the grease , load it up with cavity wax after cutting the rust out with a panel cutter on a air chisel or cut off wheel , as far as the tape i wonder if panel adhesive they put new cars together with would work better

• 
  @corpse74Ай бұрын

  Would this pass an inspection in Ontario, Canada?

• 
  @mp-xt2rgАй бұрын

  You can skip the whole scanner thing and just take a picture of it.

• 
  @bassdazeАй бұрын

  DO NOT DO THIS...

• 
  @scottthompson24612 ай бұрын

  where can i buy a set of the plastic rocker panels for a 97 chevy silverado 3 door short box.

• 
  @QuickCovers2 ай бұрын

  Unfortunately we don't offer them for that model. At this time, we don't yet have anything in the works for that generation of the Silverado.

• 
  @jaynoe14462 ай бұрын

  Need these for the gmt800 suburban

• 
  @mattyfink67982 ай бұрын

  When you wash your truck, does water get in those or does it keep water out? I don’t want to wash it and then have water sitting in those

• 
  @QuickCovers2 ай бұрын

  Quick Covers are designed to drain water and not hold moisture.

• 
  @williambean61262 ай бұрын

  Looks great!

• 
  @mandy10ca2 ай бұрын

  The video would have been better if it started from the beginning with the prep. Removal of the running boards etc.

• 
  @billyhensley77702 ай бұрын

  Where can I get a set for my 1999 Ford f150 regular cab

• 
  @GodisLove853 ай бұрын

  After I cover my rocker panels I am getting Rhino coating underneath. I am excited for this project!

• 
  @honcho7143 ай бұрын

  Those are the cheapest flimsy looking solutiin to rust I have ever seen . What a garbage "repair".

• 
  @ronaldphelps20853 ай бұрын

  What a joke

• 
  @jamesrowell663 ай бұрын

  Can I get this for a 89 Chevy regular cab

• 
  @stephenjones63614 ай бұрын

  Will this fit a 2012 Ford Raptor?

• 
  @josegranados554 ай бұрын

  Hello, where can I find that plastic kit?

• 
  @Jackknife-TV4 ай бұрын

  Not bad Got a quote for $7,800 to fix The rocker panels on my 2nd gen Dodge Ram 😂 ...

• 
  @claymomeyer78624 ай бұрын

  What all sprays did you use and what did you use to clean the plastic before painting.

• 
  @user-wc9vi2il9j5 ай бұрын

  So essentially the same solution as putting fender flares over rusty wheel wells. The problem is this will accelerate rusting by trapping debris and dirt where the rust is already prevalent. Please advise.

• 
  @QuickCovers5 ай бұрын

  Since the rust is being removed first, and the entire area is being treated with grease or cavity wax, this substantially reduces the further spread of the rust and keeps moisture from affecting the metal surface to the same degree as before.

• 
  @user-wc9vi2il9j5 ай бұрын

  @@QuickCovers thank you, very much!! We have just purchased a set

• 
  @thomohara93215 ай бұрын

  The rust in by cab comers went from 0 to 60 seemingly overnight. I just installed the textured cab corners. They look great. I did all the rust prep and followed the instructions. Easy install.

• 
  @barryrenouf34505 ай бұрын

  Do you have to paint them if the vehicle is black?

• 
  @QuickCovers5 ай бұрын

  Textured Quick Covers are UV stable and do not require paint. Smooth Quick Covers must be painted, as they are not UV stable. Both are black ABS plastic.

• 
  @barryrenouf34505 ай бұрын

  Do you make rocker panels for a 2008 Buick Enclave? @@QuickCovers

• 
  @QuickCovers5 ай бұрын

  @@barryrenouf3450 Nothing yet for SUVs. We are currently focused on full sized pickup truck applications.

• 
  @barryrenouf34505 ай бұрын

  Our provincial government requires us to safety inspect ours every two years, do yours pass gov. safety inspections? The reason why I ask is because I live in the most corrosive region in the world (The Northwestern Atlantic region that stretches from New England to Newfoundland). This is a big market here for what you have if so. @@QuickCovers

• 
  @QuickCovers5 ай бұрын

  @@barryrenouf3450 You would have to check with your local authorities to confirm the inspection requirements. I can tell you that we do get a lot of sales in PA and MA. I do know there are states/provinces where Quick Covers would not pass inspections, but I recommend you check yours specifically to be sure.

• 
  @brandonion56476 ай бұрын

  Do you make ones for the supercab? I have the he 4 door one with the small rear doors.

• 
  @QuickCovers5 ай бұрын

  Yes we do. See them here: oamusa.com/collections/2009-2014-f-150-super-cab/products/2009-2014-f-150-supercab-cab-rocker-cover-kit

• 
  @QuickCovers5 ай бұрын

  Here is a customer install video of Quick Covers on a SuperCab F-150: kzread.info/dash/bejne/iJ6LmcWdl7LbYqQ.htmlsi=hMpb-J44rMpiIXqN

• 
  @alb123456727 ай бұрын

  My bed bottoms have holes. Not sure how common that is. Do you have a solution?

• 
  @Screamingpinesfarm7 ай бұрын

  why not spray a rust converter instead of grease.tape does not like grease.

• 
  @gregpittman17007 ай бұрын

  I'm buying a rear cab corner and making new rockers out of 24g. Just cut n weld em on, paint with rockguard

• 
  @clapped_63677 ай бұрын

  I think these are better as a guard for mint rockers

• 
  @markbautista777 ай бұрын

  Is this fit on my 2002 gmc sierra 2500Hd crew car 6.6 please answer??

• 
  @QuickCovers7 ай бұрын

  Quick Covers are available for your truck. See the parts available at the link: oamusa.com/collections/1999-2006-silverado-sierra-crew-cab

• 
  @kalebbillig34728 ай бұрын

  You know you added that slow it down “AND STOP IT FROM SPREADING” you can’t stop it unless you cut all that rust off, and seal the bare metal

• 
  @joseolvera18918 ай бұрын

  Do you have to sand before primer and paint?

• 
  @QuickCovers8 ай бұрын

  Quick Covers do not require any sanding. You just need to clean them and use an adhesion promoting raw plastic primer before they are painted.

• 
  @drewjeker5278 ай бұрын

  How much did you pay for them?

• 
  @David_Tilley7 ай бұрын

  They’re $500

• 
  @xdxdxdxd16438 ай бұрын

  2009-2012 Rams quick cover would be nice.

• 
  @QuickCovers8 ай бұрын

  They are in the works for the Crew Cab version.

• 
  @xdxdxdxd16438 ай бұрын

  @QuickCovers Good to know, but I have a quad cab.

• 
  @caseysumner86749 ай бұрын

  If i have some rust bubbles on my cab corners should i grind those down first and then apply the rust inhibitor and grease???

• 
  @QuickCovers9 ай бұрын

  Hi Casey. Yes, we recommend removing as much rust as you can within the area that will be covered. You will need to have a good, clean surface where the tape will be mounted, but any rust that is starting should be removed even if it isn't yet corroded all the way through the paint or completely through the metal. This will help to slow down the spread of the rust as much as possible.

• 
  @Redwood035110 ай бұрын

  Nice job!

• 
  @user-ve2up9pw2y10 ай бұрын

  Maybe they will go on sale

• 
  @QuickCovers10 ай бұрын

  Watch for a sale in November!

• 
  @user-ve2up9pw2y10 ай бұрын

  Does anybody know do they stay on?

• 
  @QuickCovers10 ай бұрын

  We've heard back from customers who've had theirs on for 6 years and call us to say thanks. Gravel roads and lots of car washes with no issues. The 3M tape is very high quality. It is pressure activated and designed for automotive body panels. The rivets have a tri-fold design which disperses the surface area to provide a more secure hold.

• 
  @mobilemoke-ne2gr11 ай бұрын

  Hey kiddos no respiratory need for primer!!😂😂

• 
  @robertmoore519611 ай бұрын

  Holy crap, sticker shock. Looks good though.

• 
  @wburhans11 ай бұрын

  Grease?!?! Would've never have guessed.

• 
  @b1eechsnak363 Жыл бұрын

  i have no inner rockers left. and my door hinge is the remains of a street sign from a nearby ghost town. my outer rockers are that bad

• 
  @toodjackson4438 Жыл бұрын

  Wouldn't fluid film be better than trying to get grease in all them spots

• 
  @QuickCovers Жыл бұрын

  After greasing the main areas, we recommend using Like90 Wet Black Cavity Wax to get the nooks and crannies and interior spaces that are difficult to coat with grease.

• 
  @EricStevenTerry Жыл бұрын

  Too expensive for my blood.

• 
  @mcqueenfanman Жыл бұрын

  I find the comments funny in this video, y'all need to learn how to swap out intakes, you can find a used sbc intake anywhere for cheap.

• 
  @jimstaszko1675 Жыл бұрын

  Wouldn't it be better to cut out at much rust as possible?

• 
  @QuickCovers Жыл бұрын

  Yes, there is a note on the screen at 5:11 with that suggestion

• 
  @4dirt2racer0 Жыл бұрын

  daam dude u covered a Lot of rust up in there, that shits like cancer, any little bit u leave will grow, n around 6:31 there were still big bubbles under the paint

• 
  @davidbell1181 Жыл бұрын

  Not seeing rocker covers for super duty’s????

• 
  @QuickCovers Жыл бұрын

  We only offer the smooth cab corner covers for Super Duty trucks at this time

• 
  @davidbell1181 Жыл бұрын

  @@QuickCovers okay